My SPL was 3.0 .0001
with Artemis Touch 4.0 cool set
but wanted to upgrade it with new AnjaMossi V.1 and it was refusing flash after 3% and then tried to google and found Eddiee's (a forum member) hard spl flash where he was doing hard flash with bepe's arte folder by renaming os.nb with windows .nb
I did the same thing it seems worked but PPC hanged and i tried to restart the set and it complitely goes dead. now no LED no conncetion with PC via USB even bootloder also dosen't work. seems battary goes dead but I'm preety sure it's full.
something wrong with flashing, which i did for the 1st time in that way.... before that I did flashing severel times and it was ok.
any help highly apprichiated.
thanks in advance
I would be inclined to leave it charging for a few hours first, eliminate the obvious. If not, are you sure you're entering the bootloader mode correctly? Hold power button and record button, hit the reset button and keep holding the two buttons for 10-15 seconds. That should work...
thanks a lot...
i just start it as you said , definitely u saved me going panic...lol
now need to flash it again, m downloading o2 genuine flash.
keep u updating ..
thnx again
Did you bring back your Artemis from the dead?
Related
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Been there a few times myself.
Do you live in the US? If so, I could call you and walk you through it, or MSN chat, or??? or if you'd rather, let me know and I will try to walk you through it in here.
I am in Europe, time difference is large, appreciate if you give step by step instructions in this forum. Thanks again.
SuperSport,
Hi agin, waiting for ur instructions. I am missing my trinity.
Once agin thanks for ur help
Sorry to hear that...you can have a look here:
http://forum.xda-developers.com/showthread.php?t=299659
and here
http://trinityguides.info/index.php?option=com_frontpage&Itemid=1
hope that can help...
good luck...
jma81113 said:
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Click to expand...
Click to collapse
I apologize jma81113. I was unexpectedly called out of town. My nephew crashed his motorcycle and is in the hospital, so I rushed over there. I'm back now.
Any time I cannot flash another rom, I am forced to flash back to an OEM rom, in my case, I use the one found here: http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
This flashes back the original SPL, Radio, OS, etc... It works best if you can do it from a Windows XP computer. If you don't have that option, there are ways to do it using Vista outlined here.
Then I always flash the Hard SPL found here. In my case, I use Des' Crash Proof. I've had the most success flashing Cooked ROMS with this one.
From there, Flashing Cooked ROMS should work just fine. If you run into trouble, you might have to flash back to the OEM ROM again. Occasionally, I have to. I keep a copy on hand at all times.
Oops! Actually, as I read back through your message, I see that you might be getting just a BLACK screen? Is this correct? And I assume by you saying you tried to get the SPL that you mean you pushed the 'power' 'camera' and 'reset' buttons and nothing? If that's the case, let me know and I'll do some more research.
Just so I know, do you get the orange LED lighting up when you plug in the USB cable showing it's charging?
SuperSport
I am sorry to hear about your nephew accident, I hope he is well and wish him well.
Yes I got a BLACK screen when I press the 'power' 'camera' and 'reset' buttons. The device is completely dead.
When i connect the device to the laptop, red LED lights up for 10 seconds and then disappears, I even changed the battery but no sucess.
Hard Reset?
Oops! Sorry, just re-read your first post. Looks like you tried this already...
The Black Screen is new to me, so I'm shooting in the dark.
You many have already done this, but, have you tried a HARD reset? Press the 'Calendar' 'Contacts' and then 'Reset' buttons all together. Hopefully this will bring up a screen that asks if you want to do a reset. Press the Green Send key and it will reset. Let me know if that works or not...
Buttons shown in attached image:
I have done it already no luck, it seems I am going to send it to the dealer in Malaysia. Thanks any way Supersport for your time and effort. Once again hope your nephew is will.
I have posted this in another thread but noone seems to be able to help or have seen this message.
But I hope some of you can give me some kind of help so I can rescue my Touch Diamond.
I really need your help so I cand send my phone to repair on my warranty.
My Diamond is "almost" dead and when it´s connected to the batterycharger, the phone reboots allt the time, but I can access the Bootloader, and it´s the ONLY way I can have contact with my phone.
Power on won´t start my phone and with the batterycharger the text " Touch Diamond" shows upp and then reboots again and again.
But I can enter the Bootloader.
(The last cooked Rom was a beta from udk which worked satisfied. Downloaded and installed on my Diamond in November.)
I have succeded (?) to update the ROM with the official 1.93 Swedish ROM, made by HTC for the Swedish operator 3 via BOOTLOADER beause it seems to install to 100%.
I have no way to check it...had to belive that the 100% indicator was right.
Then I entered the Bootloader (only way for me to get some access to the phone) and tried to install the stock 1.93 spl found in post 20 in this thread:
http://forum.xda-developers.com/showthread.php?t=400411.
Same there: 100% is shown after install, so I thought it should work.
After install, I enter the Bootloader (tricolor) again but the text still says:
Security Unlocked
Diam100 MFG 64M
SPL-1.40 OliNex
MicroP.Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have also tried to install 1.35 spl in that post with no luck!
Do you know why it won´t show the stock spl I tried to install but shows only the hard.spl 1.40 after I tried to change the spl??
Is there another stock SPL I shall install?
I have Sim unlocked my Diamond couples of month ago with the Diamond Unlocker program.
Is my phone a brick now or can I do something so I can use my warranty?
Hope someone can help me!
Thank you very much!
Anyone?
Leave it on charger for an hour and reboot without charger...
Seems to me your battery is knocked down drained I have this too, it just will not start up.
It will start up with charger, but during startup the power is not enough to keep it going, i believe while booting, the chargeprocess is hold for a few seconds. The still empty battery just knocks down phone and -> reboot.
Method of install SPL is diff, then rom/radio.
Riel said:
Leave it on charger for an hour and reboot without charger...
Seems to me your battery is knocked down drained I have this too, it just will not start up.
It will start up with charger, but during startup the power is not enough to keep it going, i believe while booting, the chargeprocess is hold for a few seconds. The still empty battery just knocks down phone and -> reboot.
Click to expand...
Click to collapse
I just tried this and it did´nt help.
When connected to the battery charger, the phone indicates it charge for a couple of seconds, then the start/reboot thing occur again.
But the ring around the D-pad did´nt glow anymore like it does when the phone being charge.
However: I let the phone be connected to the battery charger for 5 hours, then tried to start the phone, but the phone did not react when it had no power source.
But when I have the phone connected to the charger, the phone ony starts with "Touch Diamond" on the screen and then reboots.
During the restarts I can access the bootloader.
I also tried a new and fresh battery from my friends Diamond but same problem occured. The phone wont start.
mondilv said:
Method of install SPL is diff, then rom/radio.
Click to expand...
Click to collapse
I tried to change back to stock SPL - after I had installed stock Rom -by entering the bootloader (the only way I can access my phone) and started the update for SPL. The indicator showed it was updated to 100%.
But when I look at the tricolor screen it still shows I have Olinex 1.40.
Have I made something wrong when I tried to install stock SPL? The installation indicator during the install looked normal.
Can I have problem to install the stock SPL mentioned in post 1, because I have not a WWW- Rom? I had to reinstall the original ROM for the Swedish operator 3.
Really hope someone can help me out so I don´t need to trash my phone into the garbage.
Hello,
I've just installed HardSPL succesfully, after that I wanted to install MightyRom 4.6, so I did. That went succesfully too according to my computer. Now when i want to switch the phone on, it keeps hanging with the T-Mobile picture on it. I've done a hard reset for several times and also a few soft resets. I also took my battery out for a few minutes, but when I switch it on, the same thing happens.
Please help me out of this !
Ps. sorry for my bad english !
for taking a little stress from your brain take an other rom - orig. rom from your provider.....
(go bootloder from pda; if your orig. rom only one *.exe-file you have to extract (winzip/winrar) it before flashing; connect usb (bootloader screen change from serial to usb); than flash)
but before you do this, how long you have to wait and look to your screen?
it can be sometimes a very long time until a windows-screen is coming.
if your pda gets hot than dont wait and flash asap new rom.
after 5 minutes waiting without any changes you have to flash an other rom.
I think I may have the same problem with my Diamond. I also installed MightyRom 4.6. Now, when I power up my phone, I get through the RGB stage to a white backdrop with instructions in blue to push volume button up for a reboot to manufacturers settings or push volume button down to reboot to manufacturers settings and wipe the movinand....after I select either one, when it gets to the HTC logo (HTC Diamond in white on a black background), it freezes. My pc won't recognise my phone when I plug it in...
Do I now have a really gorgeous paperweight or can I hold my Diamond to my ear again? Insight into my problem would be much appreciated.
By the way, XDA Dev rocks. Thanks to all who made this site possible.
Brick or no brick ?
Oh, I forgot to mention that my phone was a non-branded HTC running a Duttys rom. I did not want to get a DOPOD Diamond from China Mobile as they cost more and I dunno if they put Big Brother software in there.
HateMan01 said:
I think I may have the same problem with my Diamond. I also installed MightyRom 4.6. Now, when I power up my phone, I get through the RGB stage and then when it gets to the HTC logo, it freezes. My pc won't recognise my phone when I plug it in...
Do I now have a really gorgeous paperweight or can I hold my Diamond to my ear again? Insight into my problem would be much appreciated.
By the way, XDA Dev rocks. Thanks to all who made this site possible.
Click to expand...
Click to collapse
hi try and do like okokur has posted
cobbs said:
hi try and do like okokur has posted
Click to expand...
Click to collapse
My pc won't recognise my phone when I plug it in...
HateMan01 said:
My pc won't recognise my phone when I plug it in...
Click to expand...
Click to collapse
do you have it in the boot loader before you plug it in to your pc?
Brickety brick, brick, brick...
My phone does not recognize my pc and vice versa. I tried plugging the phone in before booting it up. I tried while booting up. I tried at the white screen stage...nothing...help...
It also doesn't stay at the RGB screen for long...maybe 2 seconds...
Please break it to me gently if I have killed my HTC...I don't want to start drinking again...
...
My phone is a GSM Diamond. MightyRom 4.6 is for CDMA. If I combine the two(like I did) then am I screwed?
Can someone please give me some insight, please? I have been scouring the net for 3 days non stop now and my eyes are going to explode...
What is Jtag and can your average home user use it? Is it hardware or software...?
Cobbs: I assume when you say bootloader you mean something other than the RGB screen,,,cos as I stated in my first post, my phone does not stop on the RGB screen...
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.
Hi guys, looked a lot of threads on this forum but didn't see one similar to my situation!!!
My HTC P3300 Artemis is dead in a very strange way.
-Had it for a week with WM5(factory, german) - had no problem.
-After a week i've installed the WIN6.5WWV from Shady, from this forum - everything was ok the system worked fine (did the USPL unlock before installing)
-The device worked for around a week and yesterday just died while i started a ringtone from my additional flash of 8G SDHC within the device (had no problem with the flash before)
-A note - while on 6.5, the device had different issues with stability, had to restart once in a while.
Description of death :
1. Power button does not start the device(?!)
2. Trying to Hard reset (2 soft buttons + Reset with the stylus) - firstly i get a black screen that asks for confirmation, i press the green button to confirm. I see the text :
Format FAT partition
Format is completed!!
Then a WM logo appears on the screen with a red text in upper left corner:
IPL 1.12.0001
SPL 1.11.0000
And the phone freezes in this state.(?!) - does it mean the SPL is freezing? because before that i saw like 4 lines written with red, now only 2, the last being with SPL.
PS:
-Tried to take out the battery and repeat all steps, tried to put charger to make sure the power is constant (don;t ask, just tried .
-Tried to take off battery, wait for 20 minutes, then repeat
-Tried to take battery, wait for one night and repeat (actually i didn't wait, i just went to bad, it was night already
-Tried the bootloader mode (the Power+Voice+Reset)- it works fine, but don;t know if this helps.
What could be wrong? Is it a hardware issue? Very strange!!
Thanks for your time
Have a good one
maybe u can flash it again in bootloader? that could solve the problem?
if else, it looks like a hardware issue or the phone is bricked.
mvenneker said:
maybe u can flash it again in bootloader? that could solve the problem?
Click to expand...
Click to collapse
Yesterday I tried to install from flash like described here - and it was dieing all the time at "Reading from SD" - the screen was becoming bright white and it just shut down. (tried 4 times with same result, only that the moment when the screen went white was different - from 5 seconds to 2-3 minutes)
Right now, when i wanted to reply about this, i said to myself, let me try one more time!!! What do you think???? It worked!!!!
Reading from SD (1-2 minutes)--> Flashing OS (2-3 minutes) and after this it was DONE!!!!
Shuuuush!!! HTC is so weird!!!
Thanks for the help ) i think there are 2 logical ways to go next:
A) Just use it and hope it's gonna be all right in future
B) Install a generic WM not a cooked one. And maybe it's wize to downgrade to WM6.1 or WM6?
What do you recommand?
Have a good one!!
I'm so happy i fixed it!!
well u can safely use a cooked rom, if read a few topics that it can occur sometimes that a cooked rom isnt good flashed the first time. maybe that was the case with your phone, who knows