Develop Bugs

XDA stuck at Align Screen!

Hi,
I have a problem with XDA - it is stuck at the align screen and keeps looping the cross over the screen forever.
I have reflashed rom a few time, I have disassambled the phone - cleaned the contacts, cleaned the screen, removed the schotch from the lcd 4 connectors. I even tried to glue a big piece of schotch to the screen pull the touchscreen of the lcd a bit...
nothing helps so far!!!
Do I need a new touchscreen? I really would like to fix this one, because it shouldn't be broken - it looks so nice and clean!?!!!!
Please help me!!

I found that pressure applied to the bottom left corner of the touchscreen behind the today screen button will cure touchscreen problems. When dissasembled it would be the area where the 4 leads branch off the touchscreen. I tested by slipping a doubled over piece of paper under that left corner (with the unit fully assembled). It put just enough pressure on that area that the touchscreen started working again! Try it, might work.

Thanks, but nope - stucking a paper under the casing didn't help.
I have managed to get pass align screen by deleting welcome file on PocketPC/windows/startup, but still the screen is faulty as the bottom and the top part of the screen doesn't respond to stylus!
What could this mean? Is there something wrong with the robon cable? Could reattaching the ribon cable help?!

Guess what! Just fixed the touchscreen - everybody said it's impossible - I don't know how I did it - just removed the ribon cable and soldered it back - it worked for me!!
Thanks all!!

XDA iis digitizer replacement and align screen solved
Ok to start with it is nearly impossible to solder the ribbon from a new digitizer on to a ppc lcd. I screwed up a screen trying to do that with a so called fine soldering iron but this is micro soldering, looks to be only possible by a machine. Dont glue it either as i've heard its bad too but if some one has had success then post and let us know. I just sticky taped it to the 4 metal connection lines. The ribbon is slightly see through and can easily line up.
Now when I had done this the screen align kept cycling. Yes even up to 20 times would not fix it but if you go back to the ribbon connection and make sure it is exactly on mark then you'll know the connection is ok. If the align screen responds to your taps well then it is just either the ppc getting used to the new digitizer or what I found was shuffling around the screws and making sure the insides of the ppc were snug and nothing pressing too hard on the lcd. The comment on placing a piece of cardboard was a good sujestion as when I screwed the whole thing together it suddenly aligned.
When the ppc finished installing, the alignment was a bit off by half a centimeter so i ran the align screen utility from settings again and it aligned! Now it works. Fingers crossed.

No response from a seemingly perfect touchscreen.
Hello guys it seems you guys have mastered correcting touch screen problems. If you would take a moment of time out of your day to help a dumb college kid. I have a SX66 and it has worked perfect and has remained to be a cool phone thanks to this site and the developers. I have retraced my steps a million times and here is what happened. I was surfin the web on my phone at school and the battery dropped off. I put the battery back on but the phone would not power up. 30 minutes later I tried my backup battery and bingo it powered on. But the touchscreen does not work at all. I took the phone apart and made sure connections were good and all was good. And as a last resort I reflashed my copy of wm6 to the phone. There is no cracks or blemishes on the screen. Any ideas will be greatly appreciated

HTC Touch Diamond Screen not responding

Hi All,
My diamond screen suddenly stopped responding. The screen calibration is also not working. I tried a hard reset and after that, it stopped at the screen 'Tap the screen to setup your windows phone'. I am not even able to do that. Any help is appreciable. Thanks in advance.

jitheshg said:
Hi All,
My diamond screen suddenly stopped responding. The screen calibration is also not working. I tried a hard reset and after that, it stopped at the screen 'Tap the screen to setup your windows phone'. I am not even able to do that. Any help is appreciable. Thanks in advance.
Click to expand...
Click to collapse
Try re-flashing a rom, or maybe your touch screen (digitizer) needs replacing, if you do this yourself i would recommend buying the digitizer and lcd together as one, it will make a whole lot easier trust me lol. The lcd screen is easy to break.

Had this problem, too, but since I couldn't get back to stock SPL at that time I put my Diamond into a shelf for about 2 days.
When I then tried to get back to stock SPL the screen suddenly responded again.
So, try to take off the battery for a long time (more than a day) and hope it recovers.
Didn't have the problem again.

Change the Touch Screen
jitheshg said:
Hi All,
My diamond screen suddenly stopped responding. The screen calibration is also not working. I tried a hard reset and after that, it stopped at the screen 'Tap the screen to setup your windows phone'. I am not even able to do that. Any help is appreciable. Thanks in advance.
Click to expand...
Click to collapse
I had a similar problem solved with changing the touch screen since the phone was under warranty I have to revert to the stock SPL and stock ROM before I gave it for service. If your phone is not under warranty you can buy the touch screen from ebay.com with a manual and all required instruments for replacing the same.
This happened to me because I was talking to someone over an hour in a humid place which caused sweat to get into the phone through the speakers.
Regards,
V.Balaji

Solution
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!

salterlee said:
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!
Click to expand...
Click to collapse
Thanks alot the method really worked , i really owe you dude thanks again

Putting the phone in the fridge makes screen work!
I know this is an old thread but why does putting the phone in the fridge for a few minutes make the touch screen work? Even if I put it out of a moving car and it cools down, then it works for a bit.
Anyone know why this is and how I can fix the phone permanently?

Touchscreen Digitizer Issues?

So lately I've been having problems with my DI2. Occasionally, when I unlock, it appears to receive what it thinks is a touch at a lower portion, usually around the middle of the lower portion, of the screen, and this results in things like Home being activated, or the app drawer. This will happen even if no part of my hand is near the bottom of the phone (front, back, and sides).
More recently, it has become and indication of random touching on lower parts of the screen. I've had it completely freak out and type random stuff in input fields. When it gets really bad, the touchscreen stops responding, but I can lock and unlock to get it back, usually.
This has made typing in portrait mode quite difficult, and it's becoming very annoying.
Is my touchscreen digitizer failing, or is it possible there's some sensitivity adjustment I can make? Is it possible it's related to static or something and I can use a cleaning solution or something to correct it?
I really want to avoid paying a lot to fix this issue. I've already seen places where I can buy a replacement digitizer if that is needed, but it's not cheap. I'm really hoping this phone will hold out a lot longer than it is right now as it's been an otherwise good phone.

You may want to try recalibrating your screen.
Go to Settings > Language & keyboard > Touch Input > Text input > Calibration tool.

klabit87 said:
You may want to try recalibrating your screen.
Go to Settings > Language & keyboard > Touch Input > Text input > Calibration tool.
Click to expand...
Click to collapse
i think this only calibrates the keyboard. there is an .apk around somewhere that will calibrate the touch screen, some roms have it built into the settings.

andybones said:
i think this only calibrates the keyboard. there is an .apk around somewhere that will calibrate the touch screen, some roms have it built into the settings.
Click to expand...
Click to collapse
oh ok. gotcha. Makes sense

I'll see what I can find.

nimdae said:
I'll see what I can find.
Click to expand...
Click to collapse
If not just unroot and send it to vzw
Sent from my Incredible 2 using xda premium

Well, I'm not having much hope with calibration apps. This looks like a very device specific thing, which is understandable. Besides, it doesn't really feel like a calibration issue. When it's not going haywire, touch accuracy seems fine.
I'm not really keen on going for a replacement. Besides, my physical modifications (antenna improvement, improved access to power button, etc) may prevent that
If I can't find a cheap/free solution, I'll just jump on replacing the digitizer. This is not a task that bothers me, was just hoping someone came across this issue and found a better solution.

Harbor Freight has the hot air blower for $12.00.

This may be a dumb question but i didn't see you mention it. Did you try a factory reset? Perhaps you have an app or something conflicting with screen response somewhere in there.
Sent from my Incredible 2 using Tapatalk

I seem to have dead spots once in a while on my touchscreen. Doesnt really effect day to day usage but can be annoying when trying to click something. Like a link on a webpage, sometimes I will have to scroll up or down to move the link before Im able to click it.. spot seems to be centrally located but has happened in a few places.

MJL99 said:
This may be a dumb question but i didn't see you mention it. Did you try a factory reset? Perhaps you have an app or something conflicting with screen response somewhere in there.
Sent from my Incredible 2 using Tapatalk
Click to expand...
Click to collapse
Not a dumb question at all. I did not mention it, and it's completely valid. However, I have gone through a couple of full resets since the issue started, and the behavior has persisted.
In fact, I have tried a couple of different firmwares in the time it has started. I had thought maybe a build of CM7 might have caused it, but the ICS builds have the same behavior, as well as a couple other firmwares that I don't remember the name of offhand.

cac2us said:
Harbor Freight has the hot air blower for $12.00.
Click to expand...
Click to collapse
Can you elaborate?

mastamoon said:
I seem to have dead spots once in a while on my touchscreen. Doesnt really effect day to day usage but can be annoying when trying to click something. Like a link on a webpage, sometimes I will have to scroll up or down to move the link before Im able to click it.. spot seems to be centrally located but has happened in a few places.
Click to expand...
Click to collapse
For me, it's not an issue with dead spots. For one thing, the issue is intermittent and in varying degrees of severity. Usually when it happens it's just something at the bottom activates and I can cancel it out and carry on with my session. Occasionally, though, it just goes haywire, as though a palm is resting on it or something is touching random places rapidly.
So far I've been able to kill the haywire behavior by locking the display, wiping it down a bit, unlocking the display, then continuing on. I haven't had to take any more drastic measures than that. It's still annoying in that it can happen while typing a message and I have to go back and clean up the mess it leaves, or it might monkey around with an app.
It seems as though there might be some static buildup or something because it seems worst shortly after taking it out of my pocket. If that's the case, I wonder if I can ground it out, or do something to dissipate it.

nimdae said:
Not a dumb question at all. I did not mention it, and it's completely valid. However, I have gone through a couple of full resets since the issue started, and the behavior has persisted.
In fact, I have tried a couple of different firmwares in the time it has started. I had thought maybe a build of CM7 might have caused it, but the ICS builds have the same behavior, as well as a couple other firmwares that I don't remember the name of offhand.
Click to expand...
Click to collapse
Sorry i didn't notice you mention it anywhere. Fwiw i get lockscreen issues kinda like you describe. i use the slide lock on cm7 and when i go to slide right to unlock, before it gets to the dot the lock releases without me lifting my finger. I know i don't have a dead spot because it only does it on the lockscreen and relocking and waking the screen fixes it. Only happens on cm7 and why i thought it might be an issue like that.
nimdae said:
Can you elaborate?
Click to expand...
Click to collapse
If you need to replace the screen/digitizer you will need to heat up the glue to remove the screen. Normally a heat gun is recommended
Sent from my Incredible 2 using Tapatalk

Bro I just went thru the same thing same week. And I've tried all the suggestion here, in the end it was the digitizer. I call Verizon and explain the problem and they are sending me another Dinc2. It sucks cause now you have to unroot and restore (s on) (which for me was a bit of a *****) to send the phone back , but trust me at some point the entire bottom part of your screen will not respond to touch.. You'll only be able the answer calls from the lock screen and to hang up you'll have to do so thru the pulldown bar. And the biggest problem will be you won't be able to access your key pad. Sorry bro but thoses are the facts....I'm waiting for the replacement as I type this.

MJL99 said:
If you need to replace the screen/digitizer you will need to heat up the glue to remove the screen. Normally a heat gun is recommended
Sent from my Incredible 2 using Tapatalk
Click to expand...
Click to collapse
It's not held in with a normal ribbon cable lock? It would be strange if they used a glue. I've been inside many of these devices in the past going back some 10 years (including at a repair center) and didn't face glued ribbon cables (either solder or ribbon cable lock).

nimdae said:
It's not held in with a normal ribbon cable lock? It would be strange if they used a glue. I've been inside many of these devices in the past going back some 10 years (including at a repair center) and didn't face glued ribbon cables (either solder or ribbon cable lock).
Click to expand...
Click to collapse
They are held in with a ribbon cable lock but the screen and digitizer are glued onto the phone itself, like the metal part that holds all the parts

So I wasn't able to find a software solution. Not sure what's causing it, but it's causing some unwanted issues (hang up call and it immediately calls someone else based on a false touch). I ordered the parts I need and will report if this fixes my problems.

nimdae said:
So I wasn't able to find a software solution. Not sure what's causing it, but it's causing some unwanted issues (hang up call and it immediately calls someone else based on a false touch). I ordered the parts I need and will report if this fixes my problems.
Click to expand...
Click to collapse
Where did you order from, how much did you pay?
Be sure to watch both of those vids on utube.
I live where the relative humidity is around 15% most of the time.
Still I notice that when I pull my phone out of my pocket, it has moisture all over the back where it was pressing against my leg.
I found putting it in a soft cover pouch keeps most of that under control.
Just for the heck of it , try putting the phone in a jar of un cooked rice for a few hrs.
Battery and cards removed, jar sealed tight.
If you have another phone to transfer your calls to that would be better.
If you are like me and your skin oil transfers to your phone allot, use a fine tooth brush around the area where the screen meets the housing.
Avoid pushing any debris further into the unit. Use brisk outward strokes.
If none of that produces any favorable results, look for a hot air gun or a blow dryer.
Keep us updated...

cac2us said:
Where did you order from, how much did you pay?
Be sure to watch both of those vids on utube.
I live where the relative humidity is around 15% most of the time.
Still I notice that when I pull my phone out of my pocket, it has moisture all over the back where it was pressing against my leg.
I found putting it in a soft cover pouch keeps most of that under control.
Just for the heck of it , try putting the phone in a jar of un cooked rice for a few hrs.
Battery and cards removed, jar sealed tight.
If you have another phone to transfer your calls to that would be better.
If you are like me and your skin oil transfers to your phone allot, use a fine tooth brush around the area where the screen meets the housing.
Avoid pushing any debris further into the unit. Use brisk outward strokes.
If none of that produces any favorable results, look for a hot air gun or a blow dryer.
Keep us updated...
Click to expand...
Click to collapse
I've worked in microelectronics in the past and know quite a bit about moisture control, static control, etc. I had to help manage a sizable clean room at one point.
Unfortunately it's possible that my digitizer is just flawed and the flaws are just now coming out. I don't think it's moisture, but rather most likely electrostatic. I live in a rather dry place.
I normally would not use a screen protector, but I might consider it now as it might add an extra layer of insulation from static in my pocket.
The digitizer I found was from a seller on Amazon. For all of the parts needed (I don't have the tools for properly working on this device), including the small double sided tape, I spent around $32.
The double sided tape comes in a big roll so if anyone else needs to do this kind of repair, I will ship the remaining tape for the cost of shipping (this should save you about $5).

The Cause Of Screen Flickering With A "Possible Solution"

Many One X owners, including me, has be having from display/screen issues that are quite annoying. And apparently, none has a definite answer as to what the main cause is. hTC has exchanged all those faulty devices, claiming it's a "hardware" issue...while in fact, it's their stupid back covers...i'll explain as we speak.
First, to know what screen/display problem i'm talking about, please refer to this Video.
Few days ago, i got my hands on a "Dead" One X...but i just refused that fact...because it just works! but no screen....screen is always blank....can touch it, go to dealer and make a phone call even. Sometimes the screen turned, sometimes, and it was like in the video, exactly like it.....so what's the problem?!
yesterday, i'll be honest, i got mad at this phone and held it with a tight grip...my finger happened to press just above something...and the screen turned on! worked great in fact! i was astonished! it just worked....but, oops, i turned off screen, then when wanting to turn it back on...blank...
I kept pushing on the back casing of the phone, trying to find the same place that made the screen turn back on...and viola, same place pressed on, screen back on.
Wanna know what's causing all of this?
Here you go:
Click me!
And those connectors Should be in good contact with this on the back cover
Click me too!
But you know, hTC ****ed this one up, just like it does on most devices with connectors on the back cover...*sigh*...like the sensation for example...
So what to do now?
i tried a bunch of things, and almost broke those connectors with a stupid thick aluminum foil on top of them...
also i tried bending them up, but that doesn't help either, as when the cover pushes them down, their shape will change and well...didn't work.
i also tried putting aluminum foil on the metal connectors on the actual cover...didn't help as well!
it seems only pushing on it from outside does the trick!!
i also tried pushing on the connectors together while the back casing is off, didn't work...as it seems there must be a triple connection...board, connectors, and cover...
I think the only solution would be with a new back casing? but...if hTC f****d it up with this one, wouldn't all back casing suck too?? or is this a manufacturing problem that the connectors are just short and won't connect well?!
here are pictures of how the phone turned on magically after pressing over that connector, and another of how the screen gets messed up when the, well, there's not a good connection...Thank you hTC!
Sample 1 Sample 2
Tomorrow i will buy a new back casing and report if that helped me or not.
I only came to this because i have no warranty...if you have warranty, please consider an exchange!
Oh, and finally, i was able to get into bootloader, first time i saw that screen! always has been blank!...pushing on the connector also did the trick.
Finally!
Soooo...comments?
If anyone has an idea on how to make the back casing come in better contact with those connectors, please let me know.
UPDATE

Hmm, why did you put this into Q&A?

what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
EDIT: lol, it's all good now ^^

arabology said:
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
Click to expand...
Click to collapse
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...

PAGOT said:
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
Click to expand...
Click to collapse
oh well...also WIFI connectors are bad?...no wonder SIII is flying and hTC is dying...
anyway, maybe a moderator can take this thread to the general forum, thanks for pointing those things out!
and sorry i seemed mean, but many, really, many users have nothing better to do but nag...trolls
thanks ^^

Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look normal again.....hmmmm

arabology said:
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look notmal again.....hhhhh
Click to expand...
Click to collapse
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA

muamers said:
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work

arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Like you guys would say: "inshallah" :d
Just dont rush with the opening and be carefull
Sent from my HTC One X using XDA

waw another fellow citizen
so before we go ahead and go
doooom gloooom htcccc suxxxxxxx
lets first affirm tons of people have no problems with their wifi and their screens
so yes those connectors issues whether screen or wifi are another forum of a manufacturing defect, things might not be perfectly aligned and hence the issue
the flickering issue your thread title suggests finding the source of, isnt related to this, 90% of the corruption we saw out of box on the HOX turned out to be software including the back-light flicker which HTC fixed by readjusting the LCD voltage
moving on to your question a new back cover might very well fix it unless the misalignment is on the board
but im wondering why is this pin related to the screen to begin with? the Sensation didn't have such a pin you could remove the back cover and the screen kept operating, also the disassemble photos that were posted for the HOX showed the board and screen running perfectly without the back cover
as for the stupid copper foil, make sure you don't loose it unless you are planning to make a bomb its added to distribute Tegra3 heat

arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)

I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.

Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine

walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
i say you should demand an exchange. hopefully the device they'll give will be of a different tier of products that doesn't have that silly, unknown problem.
also, i'm pretty well sure that they won't repair your device. as i read many users regarding this issue, all of them got an exchange......seems pretty messed up. and i doubt my paper trick will hold long before this issue comes back

PAGOT said:
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
Click to expand...
Click to collapse
now that i have a paper inside my back casing, i can see that my WIFI connection is not at it's best, because of the extra space it took. so i'll most probably solder all the connectors

arabology said:
Update:
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
there was some guy, who posted a youtube video of when he pushed a certain area of his screen (the front part), it would switch off!
It only did it when pushed in that area, it was literally like a second power button.
Sorry I don't know exactly what it was, just the fact that somebody else had a similar problem!

HTC repaired my phone as the screen was faulty, it had a yellow tint, when i sent it for repair it did have screen flickering, ever since its come back, with a new screen, i rooted it and also put in the NEW ARHD rom, 2.05.2 base or something, it has stopped flickering :fingers-crossed:

walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
Finally found someone with the exact same problem. I haven't been able to use my hox properly for weeks. Think I need to be sending back to HTC
Sent from my X10i using XDA

Finally I've got my OneX replaced with a new unit.:laugh: Hoping this will not have any sort of hardware faulty anymore.
interestingly. while waiting for my turn in the service center, I was just talking to a guy sitting and waiting beside me who came to report a problem with his OneX
and apparently its his 4th time visit to the service center. And all his previous 3 visits ended up with his OneX getting replaced each time....and each time with a different hardware issue (screen flickering / dead pixels / color faulty). Oh man....I thought the OneX was the best quality product from HTC.
and now I'm having a slight regret that I shud have just waited for another 2 more months and bought the SIII instead. God knows what other problems my OneX is going to come up with.

Hi
arabology said:
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
Probably what's referred to as a dry joint or some other connection not connecting very well, not uncommon in electronics.
You need to get it repaired or replaced, simple as that. If it is a dry joint under one of the chips that use a ball grid array of solder points, you will never be able to sort that out yourself and it would be scrapped more than likely rather than a repair attempted for such a fault. To repair, it would need to go into a special over to heat it enough to melt the solder under the chip. Exerting pressure will just eventually make things worse as you can end up fracturing more of the soldered connections as there is little give to resist flexing.
Regards
Phil

[Q] Vertical Line

Hey,
Just curious if anyone has had an issues with a Vertical Black Line on there screen,
i notice it mainly with things that are orange or red,
everything else seemed to be fine had the phone a few months,
i sent it in for repair,
but just curious if this is a common thing,

I've never personally heard of that happening, and its definitely not happening on my phone. Did you grab a photo before you sent it back at all? Curious.

Sounds like a hardware issue, such as screen gone bad, or ribbon cable or other connection becoming loose.
The issue of vertical lines on the screen popped up fairly occasionally back in the days when slide or flip-open keyboards were in vogue. The moving joint between the screen and the rest of the phone would sometimes cause the ribbon cable to fray or become loose.

same issue
got it back from repair . same issue said on the slip they flashed software.
issue still there mainly when u look at red images

burger30 said:
got it back from repair . same issue said on the slip they flashed software.
issue still there mainly when u look at red images
Click to expand...
Click to collapse
That's pretty f... up! This is most definitely hardware issue and they should have taken care of it. Problem is always to describe the problem to repair center good enough to make them see it.... Next time you should leave a pic on the phone with which the prob is easily recognizable and make them look at it.

Yes ,
A red background will be on it when its sent back, and nothing elese but the background,
i explained it pretty good to them , but will certainly be sending it back again

got it back ,screen replaced and bezel ,software says official now and not tampered and says relocked its workin great