Hello,
I have installed Schaps Rom (German) and I also followed the Upgrade Guide.
And now I got a new SPL, new Radio Version and this Rom works like a charm. But I want to, for serveral reason, reinstall the official version by o2-germany, which is 1.25.207.2_1.07.03.10_HSDPA here.
The setup runs fine till my device shut down and show me the 4 colour screen (the ones with SPL/IPL Version) and nothing happens then. I got on my DesktopPC an Error, that the connection is broken.
Is it because i changed the SPL version?
Anyone can help me to downgrade ^_^...
Thanks alot
McTell's you...
i had the same problem last week doing the same thing and got round it by doing the downgrade from a windows XP machine, I primarily use vista. Downgrade worked first time from spl.2.10.oli to spl.1.10 to 1.04 as decribed on mrvanx.org
Limey
limeywrx said:
i had the same problem last week doing the same thing and got round it by doing the downgrade from a windows XP machine, I primarily use vista. Downgrade worked first time from spl.2.10.oli to spl.1.10 to 1.04 as decribed on mrvanx.org
Limey
Click to expand...
Click to collapse
Where is the downgrade guide on mrvanx.org?
Thanks for replaying..
Hi All,
Radio Upgrade Version 1.18 now available.
The only fixes/tweaks I am aware of over 1.15 are fixes to roaming.
I have been using for three weeks now and don't notice any difference over 1.15 par slightly better UMTS signal at home (poor coverage in my area)
NBF only download.
For those that don't know the process to update, read here http://wiki.xda-developers.com/index.php?pagename=UNI_Radio
http://rapidshare.com/files/44169648/radio_1.18.rar.html
cktlcmd said:
Here is an alternate download site: http://www.megaupload.com/?d=UTNWU68C
---
Click to expand...
Click to collapse
Thanks for the mirror Cktlcmd!
Cheers,
Beast
beast0898 said:
Hi All,
Radio Upgrade Version 1.18 now available.
The only fixes/tweaks I am aware of over 1.15 are fixes to roaming.
I have been using for three weeks now and don't notice any difference over 1.15 par slightly better UMTS signal at home (poor coverage in my area)
NBF only download.
http://rapidshare.com/files/44169648/radio_1.18.rar.html
Cheers,
Beast
Click to expand...
Click to collapse
Thanks very much.
Where did you get this from or what manufacturer released this? IMate, Orange, TMobile, etc...????
Is this an official radio ROM or customized by someone???
---
cktlcmd said:
Thanks very much.
Where did you get this from or what manufacturer released this? IMate, Orange, TMobile, etc...????
Is this an official radio ROM or customized by someone???
---
Click to expand...
Click to collapse
Cannot reveal the source, only that it is a very reliable source, and the stack is safe and fine for use.
Cheers,
Beast
hmm possible to upload in megaupload too?? rapidshare seems problem from the place im fowloading from
beast0898 said:
Cannot reveal the source, only that it is a very reliable source, and the stack is safe and fine for use.
Cheers,
Beast
Click to expand...
Click to collapse
I assume probably OFFICIAL??? Does this mean we are to see a new OFFICIAL ROM???
and thanks for sharing...
---
Alternate Dowload Site Radio 1.18.00
Here is an alternate download site: http://www.megaupload.com/?d=UTNWU68C
---
1.15 gives me a No GSM, so I think I'll stay at 1.09.
anyone upgraded?
omega_ said:
anyone upgraded?
Click to expand...
Click to collapse
Both myslef and Laurentius have been using for some weeks without any noticeable difference over 1.15.
cktlcmd said:
I assume probably OFFICIAL??? Does this mean we are to see a new OFFICIAL ROM???
and thanks for sharing...
---
Click to expand...
Click to collapse
Nope you won't be seeing any official Rom upgrade for the Uni (Not for WM6 anyway) and I doubt very much there will be any more WM5 releases, it's far too old and providers have moved on, there is no economic beneift for them to do any more work on the Universals.
Cheers,
Beast
I will stick to 1.15, the most stable ROM for me for now.
Thanks beast0898 for your prompt answer.
I wasn't expecting ROMUpgradeUt to hard reset my device after this upgrade, have always used MaUpgradeUt_noID before... At least I have a 1-month old SPB backup image
As for radio 1.18, this seems fine - no problems with 3G calls or internet use. I haven't noticed any difference from 1.15, but like many here I like to be on the bleeding edge of updates
Many thanks to beast for bringing this to us, you are the best!
what? ROMUpgradeUt hard resetted your device?
thats wierd. it did that without asking?
anyone else had this?
im about to flash myself. i guess i'll use the old no_id flash util...
I flashed mine using the NO ID Tool. Have been using that proceedure ever since it was released and no problems with it. Mine did not hard reset.
---
cktlcmd said:
I flashed mine using the NO ID Tool. Have been using that proceedure ever since it was released and no problems with it. Mine did not hard reset.
---
Click to expand...
Click to collapse
I'm not sure where the NoID tool resides... I see in some other ROM folders a "MaUpgradeUT_noID.exe" and a "ROMUpgradeUt.exe". If I take one of those older ROM files, replace the radio_.nbf file with the one from 1.18, and run the MaUpgradeUT_noID executable (without any ms_.nbf and nk.nbf files in the folder), will that result in the NoID radio upgrade method without the hard reset?
Sorry to ask, just that the Radio Only upgrade section of the wiki shows only an upgrade method using the ROMUpgradeUT method, I want to avoid screwing this up.
http://wiki.xda-developers.com/index.php?pagename=UNI_Radio
galt said:
I'm not sure where the NoID tool resides... I see in some other ROM folders a "MaUpgradeUT_noID.exe" and a "ROMUpgradeUt.exe". If I take one of those older ROM files, replace the radio_.nbf file with the one from 1.18, and run the MaUpgradeUT_noID executable (without any ms_.nbf and nk.nbf files in the folder), will that result in the NoID radio upgrade method without the hard reset?
http://wiki.xda-developers.com/index.php?pagename=UNI_Radio
Click to expand...
Click to collapse
Yes, that was what I did. But be sure to backup just to be in the safe side.
---
Backup of course, thanks.
shlomki said:
what? ROMUpgradeUt hard resetted your device?
thats wierd. it did that without asking?
anyone else had this?
im about to flash myself. i guess i'll use the old no_id flash util...
Click to expand...
Click to collapse
Yes ROMUpgradeUt did indeed hard reset my device, without warning or asking me. This may have been caused by it crashing after it made my phone enter the bootloader, windows said "USB device not recognized" and ROMUpgradeUt tried to correct this "error", then it crashed with a windows exception error (I'm not using any USB hub, and device was ActiveSync'd fine at the start).
My phone was now in the bootloader at this point, so I just re-launched ROMUpgradeUt and this time it successfully performed the radio upgrade, but on booting up I noticed it had been hard reset I did have a 1 month old SPB backup image, so it only took me 2 hours to set everything back the way I like it.
You should probably use ROMUpgradeUt anyway as I seem to recall it being a lot safer than MaUpgradeUT_noID - just remember to always take a backup before doing any kind of ROM flashing
Anyway after half a day of using 1.18, it seems fine and stable. As good as (if not better than) 1.09 and 1.15, which I have used previously. Thanks again beast man!
MaUpgradeUT_noID worked fine, no hard reset. 1.18 seems fine so far.
can i use this to upgrade on my blue angel radio rom too??
Does anybody have a working link for this?
Neither of the two work for me. Thanks.
My O2 Xda Exec stuck in bootloader mode and i'm not able to Flash in Vista.
when ever i connect my O2 through usb it is shows as "unknown device" Even now after upgrading the Windows Mobile Device Center.
I have the same problem
Exec cannot be flashed in VISTA OS .. u need WINDOWS XP on ur PC ..
yuvraj said:
My O2 Xda Exec stuck in bootloader mode and i'm not able to Flash in Vista.
when ever i connect my O2 through usb it is shows as "unknown device" Even now after upgrading the Windows Mobile Device Center.
Click to expand...
Click to collapse
arant said:
I have the same problem
Click to expand...
Click to collapse
Yuve said:
Exec cannot be flashed in VISTA OS .. u need WINDOWS XP on ur PC ..
Click to expand...
Click to collapse
Not ture, of course it´s possible to flash in Vista, Just read here:
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flash+vista
Good luck and don´t forget to vote!
Yuve said:
Exec cannot be flashed in VISTA OS .. u need WINDOWS XP on ur PC ..
Click to expand...
Click to collapse
hi brother no hard feeling but experts here in Xda-dev have overcame that problem.... see the following thread
http://forum.xda-developers.com/showthread.php?t=313001
and most importantly you should choose correct driver depending if you are using 32 bit or 64 bit version
and @ yuvraj just try using the proper driver and try
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
and let me know.... and i"m flashing with vista with no problem at alll
Cheers
Rajiv
Problem solved
yuvraj said:
My O2 Xda Exec stuck in bootloader mode and i'm not able to Flash in Vista.
when ever i connect my O2 through usb it is shows as "UNKNOWN DEVICE" Even now after upgrading the Windows Mobile Device Center.
Click to expand...
Click to collapse
Finally i solved out the problem, that is loosing in mini usb port, after solding mini usb vista detect it.
Im stuck my phone is frozen
I have vista but no hard core cpu programming knowledge. i wanna get my phone bck online not sure the proper steps to take. i need a stepp by step for dummies lol per say. i tried upgrading an it failed can any one help me.
thnks in advance
Hi all,
Can anyone help me how to flash ROM and Radio in windows 7?
And also... IS IT SAFE?
Thank you in advance
morbon said:
Hi all,
Can anyone help me how to flash ROM and Radio in windows 7?
And also... IS IT SAFE?
Thank you in advance
Click to expand...
Click to collapse
W7 is just like any other windows!
u only have to instal drivers correctly!
Good luck
WBR
Siemens Lover
Yes it is.
HTC Flashing program doesn't rely on any drivers which means it is independent from what ever OS you use. It solely relies on you being able to create a ACTIVESYNC connection. Which means as long as you can make an ActiveSync Connection then you will be fine.
In Windows 7 and Windows Vista, ActiveSync is renamed to Windows Mobile Device Center, which requires a download from here:
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If you are still worried you can do the other method of flashing which flashes the ROM/Radio from your device itself.
Windows 7 has a knack of downloading drivers for you, so just plug in your device and wait. Then if using MTTY follow the instructions in the thread for replacing the drivers and flashing.
Or you can just run the HTC ROM Upgrade utility and flash with the stock ROM first if it gets glichy
of course you have to run the flash tools as administrator (otherwise you get a connection error).
heggenhugo said:
of course you have to run the flash tools as administrator (otherwise you get a connection error).
Click to expand...
Click to collapse
Or you can turn off the useless User Access Control (UAC).
Yea, I know my windows version on my pc is old, but are there any videos or anything using the tool kit with windows xp?
They all work for me on my computer which has XP
mt3g said:
They all work for me on my computer which has XP
Click to expand...
Click to collapse
Oh ok. After reading about rooting our phone, Im confused about the whole "kies" thing. There is a stock "kies" app that came installed with my phone. So does that mean I have to go through that whole driver issue? Can someone explain this process a little further if so?
Your probably thinking of Samsung Kies for the computer. Windows version does not matter.
You do not need Kies if your going to root just download and install the ones they tell you in the post your reading.