Related
Hi,
I read several posts, but without real solutions. Maybe someone can help us all.
Dutch people with an Artemis that is stuck at the first splash-screen need the original dutch HTC Rom. It doesn't exist as far we can find. It's not a t-mobile or something, just not branded. If anyone has a WM5 original dutch we would be glad also.
The problem is we want to flash with USPL to other WWE rom, we can get into bootloader mode without problem. It get stuck at 3% when trying to flash rom.
When running USPL it asks to copy the same files again several times, with error messages 'device not connected' and then gets stuck at 50..... with 2 error messages, cannot copy cmd.exe.
My question is : does anyone know the real solution or has original HTC rom?
Thanks !!!!!
Innovator
I have a dutch HTCP3300. Trick is to 1st give a hard reset, and remove the microSD card. Then connect via activesync as a guest (no new partnership). When connected, use startuspl.exe.
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Works like a charm, but have no dutch language anymore. For that you will have 2 wait till september (i guess) or be lucky its any sooner.
Hangs at 50... when running USPL when bricked
Hi,
Thanks for the reply. Gave it a hard reset & removed SD card. Please note I cannot connect to activesync when phone bricked, so cannot chose any partnerships nor guests. I only hear a sound that usb is connected.
Do I have to use start_uspl while the stuck splashscreen is on, or in bootloader mode? I think it makes no difference, cause before when using start_uspl and phone was working, it got automatically in bootloader mode.
When starting startuspl.exe it says NO DEVICE CONNECTED! it first asks to copy again same files (several times) - i have to say no cause it keeps asking hunderds of times, and then I get at 30 and 40% : can't spawn 'cmd.exe'.... no such file or directory as start_uspl.exe and it hangs at 50....
I know how to flash, had B&B4.0 first before i got stuck, so i have to get into uspl with a bricked phone, anoter interesting thing for all users in this forum.
I saw in Trinity forum the guy 'Pof' made an 'unbrick' tool, would be nice for Artemis users also (and no 6 weeks waiting for repair service)
Thanks for any new help!
Innovator
Twiggerdingo said:
I have a dutch HTCP3300. Trick is to 1st give a hard reset, and remove the microSD card. Then connect via activesync as a guest (no new partnership). When connected, use startuspl.exe.
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Works like a charm, but have no dutch language anymore. For that you will have 2 wait till september (i guess) or be lucky its any sooner.
Click to expand...
Click to collapse
Twiggerdingo said:
I
Afterwards u can flash any rom, but after using B&B4.0 a while, i advise u to use the clean WM6 rom whch came out on juli 13 (the english rom from HTC asia.).
Click to expand...
Click to collapse
i agree 100%.
search for "P800w_SEA_ENG_WM6_Upgrade_20070713"
and
customize to your liking using the b&b apps to be found in all the posts and look for "palestrini" with most cabs.
greetz
Tried this already?
http://forum.xda-developers.com/archive/index.php/t-312495.html
Or just flashing the new WWE WM6 rom? Or tried flashing it via an empty microsd?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Good luck!
Bricked P3300 in splash / .nbh replacement or SD flash not working with CID lock
Hi,
Thanks, but no luck.
1> I tried the German rom (not the one for the orbit) and replaced the .nbh with the B&B4.0 & renamed, also with the HTC official and P800W Sea, but all 3 hang at 3%
2> My device isn't CID-unlocked (no supercid device) so through SD card it says 'Invalid certificate' or just nothing. I tried the HTC Official WWE, B&B 4.0, P800W SEA, renamed all 3 to ARTEIMG.nbh but no luck (due to cid locked i guess). Maybe I will do it when waranty is over. Hate to send it in to wait for 6 weeks.
If HTC repair service can do it, why wouldn't anyone from the xda developpers site cannot fix a bricked p3300? Or is the only method that i have the original dutch HTC rom (not branded) which isn't out.
Thanks if anyone can solve this problem!!!
Innovator
Twiggerdingo said:
Tried this already?
http://forum.xda-developers.com/archive/index.php/t-312495.html
Or just flashing the new WWE WM6 rom? Or tried flashing it via an empty microsd?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Good luck!
Click to expand...
Click to collapse
Wat numbers do you see in the colored screen? Ie Ispl?
look here: http://forum.xda-developers.com/showthread.php?t=312871
if you know someone with a working dutch artemis, you can make a rom backup out of it and flash it to your device.
ok, i know its not the easy way, but at least it seems to work.
Backuped up Dutch Rom please
Hi Twiggerdingo,
The numbers are :
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
OS 3.4.0.0
B&B4.0 was flashed with uspl from the original WM5 Dutch rom. B&B Worked perfect, but everything went wrong when flashing ARTE_NLD_WM6_RvBCrS. It was an .nb file, converted it to .nbh (cause always hangs with bat file) but no luck. It seems that it always goes wrong with a .bat file and a OS.NB file. Never been stuck with an upgrade.exe and an .NBH file.
Hope I can fix it this week instead of sending in for repair and 6 weeks waiting... If anone has the dutch original rom (or can make a .nbh backup) ?
There is also a htc rom tool version 1.0.1 (rombuilder by dark simpson) i saw on this forum. You can select a rom, choose country id, language, ...
I wonder if I could change the country id,... to the same as my dutch rom, so that it would flash, but can't remember the country id the other data.
Thanks for any help!!
Twiggerdingo said:
Wat numbers do you see in the colored screen? Ie Ispl?
Click to expand...
Click to collapse
maby stupid from my side.
are you running XP or Vista??
Unbrick P3300 with Vista
Hi,
I'm running vista, but I can't see the problem, cause i flashed many roms without problems to B&B 4.0,...
What does Vista witheld that XP can with a bricked phone ?
Tomorrow my friend comes with his XP laptop, will this make a difference you think?
Thanks!
Marcus_de_zwarte said:
maby stupid from my side.
are you running XP or Vista??
Click to expand...
Click to collapse
1.12.404.1.nld
The only rom that can unbrick my device would be the original rom i guess, it would be the 1.12.404.1.NLD (9/12/06). Anyone can help me to find this one? Not on HTC site, no support at all.
Hi Innovator,
Vista seems to give some problems for some people when they are trying to flash their rom. its reported in several other threads. Mayby XP can help you, although when it HAS worked for you, i think the chances are small.
My GUESS is that you have to reflash your current rom somehow, so the last terrible rom youve mentioned. (dont know that 1...).
So this 1:
ARTE_NLD_WM6_RvBCrS
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
Afterwards use uspl. And then u can continue for another 1. At this point i dont think a original Dutch Rom can help you out.
upgraderom.bat = no device connected
Hi,
I will try tomorrow with XP, the problem is that ARTE_NLD_WM6_RvBCrS rom is an OS.nb file with an upgraderom.bat file.
When i try to upgrade rom with this batfile & .nb it says copy files again? with device not connected remark. This is the same as when trying to run USPL, so i think to flash like this you need a working phone. For USPL it needs windows CE to work and the same error.
How can I easily convert this os.nb to os.nbf ? I tried some tools but had to fill in a lot of stuff (didn't know what).
I like more flashing with upgrade.exe tool & .nbf files, no problems at all.
Thanks
Twiggerdingo said:
Hi Innovator,
Vista seems to give some problems for some people when they are trying to flash their rom. its reported in several other threads. Mayby XP can help you, although when it HAS worked for you, i think the chances are small.
My GUESS is that you have to reflash your current rom somehow, so the last terrible rom youve mentioned. (dont know that 1...).
So this 1:
ARTE_NLD_WM6_RvBCrS
IPL 3.07.0001
SPL 3.07.0000
GSM 02.95.90
Afterwards use uspl. And then u can continue for another 1. At this point i dont think a original Dutch Rom can help you out.
Click to expand...
Click to collapse
Hey, any luck on the XP-laptop?
Found this:
http://tools.ramonshare.com/?p=3
Look who posted it, the maker of your faulty rom!
also, maybe a bit more worrying:
http://forum.xda-developers.com/showthread.php?p=1269267
Sounds familiar?
RvBCrS Guy & rom-flashing
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Twiggerdingo said:
Hey, any luck on the XP-laptop?
Found this:
http://tools.ramonshare.com/?p=3
Look who posted it, the maker of your faulty rom!
also, maybe a bit more worrying:
http://forum.xda-developers.com/showthread.php?p=1269267
Sounds familiar?
Click to expand...
Click to collapse
Innovator said:
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Click to expand...
Click to collapse
did you try and use the "mitty routine"
or can you get it recognized by windows ? the reason i ask this is because i do have a back up image from WM5 NL (Tmobile)
let me know how i can help you.
neilhhardy said:
the reason i ask this is because i do have a back up image from WM5 NL (Tmobile)
let me know how i can help you.
Click to expand...
Click to collapse
do you have also a copy of wm5 nl for me ?
i want to back flash it but i don't have wm5 nl rom .
thanx daffy
Innovator said:
Hi,
No luck again.... repair service is nearby...
Tested all the roms on XP and same errors, hangs at 3% maximum.
I have the pdocwriteartemis by the RvBCrS guy, i put the os.nb in the rom directory and now it says 'not all depencies are found! now quitting".
RvBCrS says only OS.nb like i did, is there something wrong with this guy?
Maybe he can save his image on xda forum (and my Artemis).
Hope to find a quick solution...
Thanks!
Click to expand...
Click to collapse
try here and let me know how your doing.
http://eazyvg.wordpress.com/2007/05/23/running-wm6-on-htc-p3300-cid-locked/
Cannot flash with upgradeartemis.bat file in dos
Hi,
I'm really sorry but I cannot flash through a .bat file in dos, it asks always to copy the same files again, you have to take no cause it keeps asking hundred times (device not connected also mentionned)
Then you have to wait 12-20 min (if it hangs 30min mentionned) but it stays on the bootloader screen, nothing happens.
I can only flash with .nbh from storage card
or with upgraderom.exe (in windows).
Only from bootloader mode, cannot get into activesync also.
Best regards,
Innovator
Hi All,
I am facing the dreaded 'No GSM' error and unable to flash radio rom problem.
tried to flash every possible rom including original O2 one. All failed on radio ram flash.
Went through various threads and there seems to be no solution yet for universal (though there seems to be a solution for Hermes).
So all, please help me if there is some light in the end of this tunnel
regards
Topgun
i have tried all the possible things but no luck so far.....
please help
I just bought a used XDA with this same problem. Thought if i flash it it would work... any suggestions on what I can do? i havent touched it yet. Thanks
has ANYONE been able to solve this problem?!!!! Pls what did u do step by step.... I spent so much money on this %&%$& Phone!!! pulllleeeessssss
I haven't had this problem, however it sounds like you phone may be SIM locked? If so, you will need to flash it with the native ROM from it;'s origin. If it is SIM and CID locked, it will only take the OEM signed ROM.
Quote from POF (Moderator)
"Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader."
If this is of any help. It is from a thread on CID Unlocking RUU for Uni
Thanks.
i have been through that thread.
well the question on that is 'Is hermflasher okay to flash Universal as well'?
Where is this thread? i can try it.... but cant find the thread on cid unlocking ruu for universal in mermes section....
raskell said:
I haven't had this problem, however it sounds like you phone may be SIM locked? If so, you will need to flash it with the native ROM from it;'s origin. If it is SIM and CID locked, it will only take the OEM signed ROM.
Quote from POF (Moderator)
"Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader."
If this is of any help. It is from a thread on CID Unlocking RUU for Uni
Click to expand...
Click to collapse
Here is the thread
http://forum.xda-developers.com/showthread.php?t=301662&highlight=radio+error
Let me know if you have any luck with this.
cheers
topgunarindam said:
http://forum.xda-developers.com/showthread.php?t=301662&highlight=radio+error
Let me know if you have any luck with this.
cheers
Click to expand...
Click to collapse
no, hermflasher wont work with universal (I dont think) ill consult with some others and report back here our consensus on what to try
I am facing the same 'No GSM' error in xda exec, plz can somebody tell me step by step how to solve it.
Thanks Midget
shall wait for your word.
Midget
topgunarindam said:
shall wait for your word.
Click to expand...
Click to collapse
I'm waiting too.
Good News at Last
atleast it worked for me.
flashed using a different pc with radio 1.18 and it worked.
the radio is working fine with laurentius26's WM6 rom.
atleast my brick comes live again.
LUCKY YOU!!!!!!!!
topgunarindam said:
atleast it worked for me.
flashed using a different pc with radio 1.18 and it worked.
the radio is working fine with laurentius26's WM6 rom.
atleast my brick comes live again.
Click to expand...
Click to collapse
lucky you, I tried that same WM6 ROM (with radio 1.18) and still same problem. I've tried falshing with 2 different desktops and a laptop. Still same problem! Topgun, did u have active sinc installed ? was the PC u used fresh? (no apps installed). do u think if i format my PC it could flash the radio? DID u flash radio only? or the whole laurentious v3 WM6 package (that is at the same time)?
Pls reply
Tbaba said:
lucky you, I tried that same WM6 ROM (with radio 1.18) and still same problem. I've tried falshing with 2 different desktops and a laptop. Still same problem! Topgun, did u have active sinc installed ? was the PC u used fresh? (no apps installed). do u think if i format my PC it could flash the radio? DID u flash radio only? or the whole laurentious v3 WM6 package (that is at the same time)?
Pls reply
Click to expand...
Click to collapse
Him
well it was a laptop dell to be precise.
it was never used for window mobile usage previously and hence fresh Active sync 4.5 was installed.
only radio rom 1st (using the RUU check bypassing)......
once succesful, then laurentiius rom was tried.
one more thing i had entered bootloader manually after disabling AS 4.5
i used the original USB cable as well
hope this helps....
suggest get hold of some friends "win mobile virgin" pc/laptop.
P.S>- i am not sure but this prob might be somewhat related to COM ports available on your machine.
PLZ help me, while trying to upgrade my HERM I lost the Radio, there is a message (No GSM) appearing during the boot.
I've tried many unofficial ROMs, but still getting the same message!!!
And when I tried to use the official ROM, the upgrade stopped on 11%!!??
To solve the hangup problem, I used unofficial ROM again, and after the upgrade I found the same GSM problem again.
FirasKB said:
PLZ help me, while trying to upgrade my HERM I lost the Radio, there is a message (No GSM) appearing during the boot.
I've tried many unofficial ROMs, but still getting the same message!!!
And when I tried to use the official ROM, the upgrade stopped on 11%!!??
To solve the hangup problem, I used unofficial ROM again, and after the upgrade I found the same GSM problem again.
Click to expand...
Click to collapse
What "official" ROM? You've given absolutely NO info regarding anything friend...
Myself, I'd click the green link in my signature... but that's me
My problem is clear, there is No GSM in my HERM, I've tried WM 5, WM 6 and WM 6.1, but no way, I couldn't success??!!
Kindly, advice if you have any solution or ask for a specific info.
FirasKB said:
My problem is clear, there is No GSM in my HERM, I've tried WM 5, WM 6 and WM 6.1, but no way, I couldn't success??!!
Kindly, advice if you have any solution or ask for a specific info.
Click to expand...
Click to collapse
Yes your problem is clear, you have no GSM. I don't know where you hail from, which exact PDA you have, your provider, what ROM you last used before this happened, etc..
Dr Puttingham said:
Yes your problem is clear, you have no GSM. I don't know where you hail from, which exact PDA you have, your provider, what ROM you last used before this happened, etc..
Click to expand...
Click to collapse
Fine,,,
Device: at&t 8525
ROM: Original WM5 ROM, and while trying to upgrade it my device hanged up on the colored screen. To fix that, I've installed schap's 4.31 WM6 ROM using the MicroSD Card (HERMIMG). Now the device can boot but with No GSM at all (even there's no information about the GSM under Device Info).
The device now can accept any modified ROM (like schap's, faria, etc...) but unable to accept the official (original) ROMs. When I try to install any official ROM the upgrade process will stack on 11% every time.
So, the device still having no GSM.
Thank You....
FirasKB,
Most roms on her DO NOT come with a radio included. Usually only the manufacturer roms do.
There are 2 things you need to do:
- Consult the MrVanx guides which will help you understand what you are doing (google search for this).
- go to the wiki in this forum and search for a radio rom to upload.
In summary, reflash, say, Scahps rom then flash a radio rom from the wiki (I suggest radio 1.47, which is pretty reliable).
Hope this helps.
WB
FirasKB said:
Fine,,,
Device: at&t 8525
ROM: Original WM5 ROM, and while trying to upgrade it my device hanged up on the colored screen. To fix that, I've installed schap's 4.31 WM6 ROM using the MicroSD Card (HERMIMG). Now the device can boot but with No GSM at all (even there's no information about the GSM under Device Info).
The device now can accept any modified ROM (like schap's, faria, etc...) but unable to accept the official (original) ROMs. When I try to install any official ROM the upgrade process will stack on 11% every time.
So, the device still having no GSM.
Thank You....
Click to expand...
Click to collapse
Ahhh, a little info.
First download the official AT&T 3.62 ROM which includes the 1.54.07.00 radio.
Reboot the pc with the PDA disconnected.
(Oh, make sure that you have ActiveSync 4.5 insttalled of course)
Put the device into bootloader mode (hold power and OK button while pressing reset with stylus, nice tri color screen will appear)
Connect the PDA to the USB cable and run the RUU_Inside.exe file.
wacky.banana is correct, most chef's don't include a radio. You've got a corrupted ROM (due to the incomplete flash) The RUU_Inside.exe will typically talk directly to the hardware when nothing else can and fix. I've personally recovered around 10 or so 8525's that I've "bricked" with bad flashes and then repaired with this method.
I can't guarantee that this will work but it IS your best shot friend.
Good luck!
Dr Puttingham said:
Ahhh, a little info.
First download the official AT&T 3.62 ROM which includes the 1.54.07.00 radio.
Reboot the pc with the PDA disconnected.
(Oh, make sure that you have ActiveSync 4.5 insttalled of course)
Put the device into bootloader mode (hold power and OK button while pressing reset with stylus, nice tri color screen will appear)
Connect the PDA to the USB cable and run the RUU_Inside.exe file.
wacky.banana is correct, most chef's don't include a radio. You've got a corrupted ROM (due to the incomplete flash) The RUU_Inside.exe will typically talk directly to the hardware when nothing else can and fix. I've personally recovered around 10 or so 8525's that I've "bricked" with bad flashes and then repaired with this method.
I can't guarantee that this will work but it IS your best shot friend.
Good luck!
Click to expand...
Click to collapse
Thanks to your support friends,,
I've done as you mentioned, but the upgrade process stopped on 11% again and couldn't complete!!?? (the message ERROR [262]: UPDATE ERROR appeared on my P.C)!!??
Kindly, advice...
I can't remeber what error 262 is about; however is your device unlocked? If it is not then you need to address that issue first (its in the wiki)
Secondly have you installed hard spl to your device BEFORE attempting to upgrade your rom? If the answer to this question is no then that will confirm that you have not read up on this before jumping in, which is hugely dangerous.
WB
Stuck.... completely stuck
My fiances phone is stuck in the tri color bootloader screen. I am in the US and i have tried everything from flashing the original RUU to a hard reset and everthing, but nothing seems to work. the IPL is 4. 10. 0002 and the SPL is 4. 10. 0000. Can someone please help me. I know there has to be a way to fix this.
I had the same problem. After trying to fix it myself for about a week I gave up and sent it to AT&T Repair center. Got it back functional.
I haven't tried the Himalaya ROM method, though.
Check this thread:
http://forum.xda-developers.com/showthread.php?t=372895
Good luck!
wacky.banana said:
I can't remeber what error 262 is about; however is your device unlocked? If it is not then you need to address that issue first (its in the wiki)
Secondly have you installed hard spl to your device BEFORE attempting to upgrade your rom? If the answer to this question is no then that will confirm that you have not read up on this before jumping in, which is hugely dangerous.
WB
Click to expand...
Click to collapse
Thanks again to your support,
The problem happened when I tried to unlock the device to upgrade it (it was fine befor), I don't know whether it was already locked or not, but usualy when I buy any Pocket P.C I'm preparing to unlock it first (I've done that many times on HERMES before, but this is the first time I'm facing such problem!!). So, while unlocking the device it's stucked on the tri color screen.
I've done many things after that to solve the problem (updating the hard SPL to v2.10 successfully, flashing many ROMs -not including Radio- successfully).
So, I can flash any ROM now but it must be without Radio, otherwise the flashing process will stuck on 11%.
try reading the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
More than 2 days and I couldn't success to bring the Radio back??!! I think I've really lost my device.
FirasKB,
What steps exactly have you taken to solve the problem? Try and outline them here; that will help people on here to identify what else you need to do to bring the device back to life.
WB
FirasKB said:
More than 2 days and I couldn't success to bring the Radio back??!! I think I've really lost my device.
Click to expand...
Click to collapse
Schap´s Rom has NO Radio. Flash this one BUT u must have HardSPL
http://forum.xda-developers.com/showthread.php?t=348435&highlight=Radio
wacky.banana said:
FirasKB,
What steps exactly have you taken to solve the problem? Try and outline them here; that will help people on here to identify what else you need to do to bring the device back to life.
WB
Click to expand...
Click to collapse
wacky.banana,
As I wrote above, my problem still not solved and my device still running with (No GSM).
I've done the following:
- Updating the ROM (O.S only as the device not accepting any Radio ROM)
- Updating the SPL to Version 7.
- Trying to update the radio (separately) but I didn't success??!!
It seems there is no solution to fix this problem???!!!
Abo Forat said:
Schap´s Rom has NO Radio. Flash this one BUT u must have HardSPL
http://forum.xda-developers.com/showthread.php?t=348435&highlight=Radio
Click to expand...
Click to collapse
No way, I tried it but my device can't accept any Radio version.
FirasKB said:
wacky.banana,
As I wrote above, my problem still not solved and my device still running with (No GSM).
I've done the following:
- Updating the ROM (O.S only as the device not accepting any Radio ROM)
- Updating the SPL to Version 7.
- Trying to update the radio (separately) but I didn't success??!!
It seems there is no solution to fix this problem???!!!
Click to expand...
Click to collapse
Frisk,
Read this thread and try the solutions metioned in it. It tells you what error 262 is all about....http://forum.xda-developers.com/archive/index.php/t-298516.html
Cheers
WB
wacky.banana said:
Frisk,
Read this thread and try the solutions metioned in it. It tells you what error 262 is all about....http://forum.xda-developers.com/archive/index.php/t-298516.html
Cheers
WB
Click to expand...
Click to collapse
Unfortunately, but that's also didn't help, because the main problem now is how to install the Radio on the device??!!
The device is not accepting the Radio installation at all, NO WAY....
hi,
im a 1 day user of htc universal,hehe!actually i just only bought it yesterday and i want to upgrade it to wm6.1 since its only wm5.i already red some forum about unlocking but im not quite sure if i really understand about unlocking thats why i want to ask help for the universal's expert,hehe!what should i first supposed to do before upgrading wm6.1 rom,is it similar to htc wizard regarding unlocking coz i had it before,please help me coz im excited to use this gadget,hehehe!
cyleandrei07 said:
hi,
im a 1 day user of htc universal,hehe!actually i just only bought it yesterday and i want to upgrade it to wm6.1 since its only wm5.i already red some forum about unlocking but im not quite sure if i really understand about unlocking thats why i want to ask help for the universal's expert,hehe!what should i first supposed to do before upgrading wm6.1 rom,is it similar to htc wizard regarding unlocking coz i had it before,please help me coz im excited to use this gadget,hehehe!
Click to expand...
Click to collapse
Welcome to the forum
Please READ here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
And remember to use SEARCH button before posting
Good luck,
orb3000 said:
Welcome to the forum
Please READ here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
And remember to use SEARCH button before posting
Good luck,
Click to expand...
Click to collapse
i red this link already my friend but im not sure that i really understand the procedure in upgrading thats why im asking for the help of anybody who knows universal because it also iunclude in the link the procedure in upgrading wizard its very confusing for me.
thanks to your reply!
I have to agree with Andrei here, the doc is not very enlightening,
from what I have read there are a few things missing.
For example I don't know if I have to "unlock" my phone. I bought it on ebay they said it was unlocked, the phone was not available in USA&Canada they imported it somehow from Europe (it's an MDA Pro). I beleive it is unlocked already but ...some users here say "completly unlock your phone" ...which means...there are some other partial "unlocks" ???
The Wiki procedure says you have to backup your files...It is har to beleive that there is no standard reliable software that can be included and mentioned in this procedure. This is an important step and if anything goes wrong you must be able to find your way back to at least what you had had before you did the upgrade.
As for "the search button" ...I have tried that and ...)) the same results tons of answers ...you need years to read and to process all that info.
Guys,
After Having Device only for few days to upgrade may not be advisable. Therefore I suggest you to take few days to get to know your device and read more info.
REgarding the "Locked Device" means you would only able to use the device with the SIM of the Orginal carrier. As you already using the device in other country and other service provider..I guess you device is UNLOCKED.
Anyhow I will try to short describe how to upgrade goes.
1) Make sure you get the orginal OS of your device first. anything goes wrong you can flash back to that OS.
2) make sure you backup your personal files from the device( files;PIM;etc.etc)
3) make sure you have bootloader higher then V1.0
4) make sure you have full charged Battery
5) Remember that in cooked WM6 the vidoe call doesnt function anymore!!!
6) Download a cooked ROM available here in the Universal forum. ( the New ROM of Tomal V8.5 is great one)
7) I.E Tomals ROM file has got everything you need to Flash your device
8) Anything else is clearly descriebed in the WIKI "READ IT carefully"
Good Luck.. dont blame if anything goes wrong
Bulldog said:
Anyhow I will try to short describe how to upgrade goes.
1) Make sure you get the orginal OS of your device first. anything goes wrong you can flash back to that OS.
Click to expand...
Click to collapse
Couldn't find any decent procedure to backup my ROM. Could you please point me to one of them ?
I am running Windows Vista x64.
2) make sure you backup your personal files from the device( files;PIM;etc.etc)
Click to expand...
Click to collapse
This is done. Used a "trial copy of a program recommended here.Not sure I will be able to restore because of the trial limitations...Suggestions ?
3) make sure you have bootloader higher then V1.0
Click to expand...
Click to collapse
I have exactly 1.0. Can I upgrade this by just runing JASJAR_BL1.01_RUU_v1.2.exe ???I have an MDA Pro.
4) make sure you have full charged Battery
Click to expand...
Click to collapse
N.P.
5) Remember that in cooked WM6 the vidoe call doesnt function anymore!!!
Click to expand...
Click to collapse
Don't need it, it'sw OK for me
6) Download a cooked ROM available here in the Universal forum. ( the New ROM of Tomal V8.5 is great one)
Click to expand...
Click to collapse
I believe I will try this one.
7) I.E Tomals ROM file has got everything you need to Flash your device
Click to expand...
Click to collapse
i hope so
8) Anything else is clearly descriebed in the WIKI "READ IT carefully"
Click to expand...
Click to collapse
Aparently if your PDA is seen by UNI_ExitBootloader.exe that means the reboot command is executed then you should be OK. But....I tried that and I had to try it twice, the first time didn't work.
So...apparently I will have to try to bootloder upgrade and after that burn the new ROM.
I still need a way to save the old one.
BTW, in what circumstances can yu damage your phone up to the point where you can not reflash it or use it anymore ?
nad one more question, will the phone work (calling and receiving calls) if the software is gone ? I believe it will not but...what do I know ? )
I'm also not totally clear on the instruction. Though they seem to be complete the style their written in leaves some questions.
If I have a G4 then is the file "HTC_Uni_SIM_Unlock_v1.rar" at ftp://ftp.xda-developers.com/Universal/Tools_and_Programs/ is what is needed to unlock CID/EROM locks in preparation for ROM flashing?
Or is SIM unlocking totally different from the unlocking were talking about?
Thank you vary much!
1000QA said:
Couldn't find any decent procedure to backup my ROM. Could you please point me to one of them ?
I am running Windows Vista x64.
This is done. Used a "trial copy of a program recommended here.Not sure I will be able to restore because of the trial limitations...Suggestions ?
I have exactly 1.0. Can I upgrade this by just runing JASJAR_BL1.01_RUU_v1.2.exe ???I have an MDA Pro.
N.P.
Don't need it, it'sw OK for me
I believe I will try this one.
i hope so
Aparently if your PDA is seen by UNI_ExitBootloader.exe that means the reboot command is executed then you should be OK. But....I tried that and I had to try it twice, the first time didn't work.
So...apparently I will have to try to bootloder upgrade and after that burn the new ROM.
I still need a way to save the old one.
BTW, in what circumstances can yu damage your phone up to the point where you can not reflash it or use it anymore ?
nad one more question, will the phone work (calling and receiving calls) if the software is gone ? I believe it will not but...what do I know ? )
Click to expand...
Click to collapse
1)I have no Vista therefore I cnt give you much info and that but I have read alot of issues with it. Therefore I suggest you to read more on how to upgrade in Vista.
2) I personally dont use any Backup Software. I syc. My Device with my desktop and M$ Outlook. Any Info that I have with contacts,Appointments,Task even My Documents folder and files. Those will be available on my Desktop and after upgrade you can Sync. them to you Device with new ROM
3) If you have BL 1.0 which means you should have G3 device then I believe you can use the JASJAR_BL1.01_RUU_v1.2.exe ???I have an MDA Pro.
4) UPGRADE in XP....YOU NEED TO CHECK HOW IS IT IN VISTA
4.1) Download Tomals ROM which comes in package like:TML_v85_WM61_20764_ST.exe (that is the standard OS).
4.2) Put your device in boot loader mode with button Comb. >power B + Back light B + Push the reset B <with stylus until you see on the screen the Boot loader Screen. Connect Device to your Computer.
4.3) Start the TML_v85_WM61_20764_ST.exe with double click and the installation will start.
4.4) follow the screen instruction.
4.5) After completing the upgrade Disconnect the Device from the Computer.
4.6) Push button comb. >push left soft key B + push right soft B + Push with stylus the reset B< untill you see message on the screen ....Push "0 (nill)" to set device to factory setting or something..
Well then you should be fine and completed your upgrade. AGAIN CHECK THE UPGRADE WITH VISTA.. I have no experience with Vista.
Bulldog said:
1)I have no Vista therefore I cnt give you much info and that but I have read alot of issues with it. Therefore I suggest you to read more on how to upgrade in Vista.
2) I personally dont use any Backup Software. I syc. My Device with my desktop and M$ Outlook. Any Info that I have with contacts,Appointments,Task even My Documents folder and files. Those will be available on my Desktop and after upgrade you can Sync. them to you Device with new ROM
3) If you have BL 1.0 which means you should have G3 device then I believe you can use the JASJAR_BL1.01_RUU_v1.2.exe ???I have an MDA Pro.
4) UPGRADE in XP....YOU NEED TO CHECK HOW IS IT IN VISTA
4.1) Download Tomals ROM which comes in package like:TML_v85_WM61_20764_ST.exe (that is the standard OS).
4.2) Put your device in boot loader mode with button Comb. >power B + Back light B + Push the reset B <with stylus until you see on the screen the Boot loader Screen. Connect Device to your Computer.
4.3) Start the TML_v85_WM61_20764_ST.exe with double click and the installation will start.
4.4) follow the screen instruction.
4.5) After completing the upgrade Disconnect the Device from the Computer.
4.6) Push button comb. >push left soft key B + push right soft B + Push with stylus the reset B< untill you see message on the screen ....Push "0 (nill)" to set device to factory setting or something..
Well then you should be fine and completed your upgrade. AGAIN CHECK THE UPGRADE WITH VISTA.. I have no experience with Vista.
Click to expand...
Click to collapse
That is exactly what I did.
I am happy now excepting that I don't know if I need to instal RealVGA or that is included. I belive it is not.
I will try tomorrow.
Thanks
1000QA said:
That is exactly what I did.
I am happy now excepting that I don't know if I need to instal RealVGA or that is included. I belive it is not.
I will try tomorrow.
Thanks
Click to expand...
Click to collapse
The realVGA is not included in the Tomals ROM. you need to download it separately.(http://forum.xda-developers.com/showthread.php?t=327830)
I am not that young anymore and therefore I found my self having issues with the RealVGA. 128DPI is nice but you need good eyes. 96DPI is not usable I would say
THREAD CLOSED
TQ all
Dear all,
if you got some solution for my prob. please email me
[email protected]ail.com
waitin for u all guys
if you succeded in flashing rom there's no reason u wouldn't be able to update radio - procedure is the same, just flash it as you would flash rom.
forget about softspls
Yes Jedai, it supposed to be like you said...
but something wrong. I dont know why, The flashing wouldn't upgrade the radio
Fortunately, I got two computer whith different OS (w7 & XP)
After 2 day in the hell, God gave idea to flashed it with XP...
Its done, the radio finally updated...
Thank God...
Thank you all
conclusion, Win7/vista > suck for me... to manny restriction (I think)
kingshan said:
Yes Jedai, it supposed to be like you said...
but something wrong. I dont know why, The flashing wouldn't upgrade the radio
Fortunately, I got two computer whith different OS (w7 & XP)
After 2 day in the hell, God gave idea to flashed it with XP...
Its done, the radio finally updated...
Thank God...
Thank you all
conclusion, Win7/vista > suck for me... to manny restriction (I think)
Click to expand...
Click to collapse
I'm so sorry I didn't get back to you earlier. Glad to hear it worked out. For future, use the Flash program from the ROM that worked to flash the Radio,it should flash fine. There are a couple different Flash Programs out there, and some do not like to work with Win Vista/7.
hoho
hoho.....................