BB Messenger for Windows Mobile - HTC Excalibur

I've done some searching and it seems as if there is no solution....unless someone has something to the contrary to offer......is there a way to communicate via PIN msgs (incoming and outgoing) if you have bb connect for windows mobile?
thanks
eric

i dont understand....wats ur problem? bb connect would not connect or wat?

bb connect works perfectly, except i used to have a berry and i loved the bb messenger.........is there any way to get it or a variation of it working on an s620?

Related

Pushmail

Ok, I am currently using Smarter (Not in the States right now), but it says it wont work in the States. I also have Pocket MSN not bad but only works with hotmail or msn accounts. I know Smartner is working on a US version, but no expected date. I have heard about Blackberry Connect for PocketPC but don't know when that will be released either.
I am looking for a program that works like smartner, configures the inbox and connects on its own. I dont really care for the web-based connectivity.
Does anyone know of a stable Pushmail program that can be ran from the client machine????[/b]
i'm not sure if smartner is available on the PocketPC but i've been using it on my SonyEricsson P910 while i've been using Blackberry Connect on both my SE P910 and O2 XDA IIs ... works fine ....
I have smartner running for the pocketpc, how did you get the blacberry connect running, does your server support it? when i get home i know my company supports blackberry so maybe that is a possibility
Using Smartner
I'm using Smartner in Canada, you should have no trouble south of the border.
Go to the Smartner Support site and download the cab and destop apps. Works pretty good. It's not BB, but not bad.
difensore: could you ease post the bits for the blackberry connect for pocketPC?
it would be greatly appreciated by all on this board!!!!!!
Raptor

Question about Blackberry Connect Software for BA on WM2003

Please forgive me if this was already addressed at some other point. I searched, but could not find the answers I needed. I found the BlackBerry Connect software (after a while on the forums) and installed it on my BA. The software runs, generates a PIN, etc...
Right now, I do not have BB service on my plan, and I am wondering - will this client only work on BB Exchange Connector, or will BB Web Connect work also? I want to make sure I get the service that best suits my needs...
If a PIN is generated w/o sync, do I still need to sync it w/ BB software on a Win PC? I use *nix and that would be inconvinent to say the least...
Also... How the hell do you uninstall BB software if you decide not to use it? There is no entry in the remove programs app...
Thanks!
Does anybody have any practical experience with this peice of software for other than BES connectivity?
Does anybody know if this can be used for PIN messages or other Blackberry push services?

Blackberry Connect SW on JasJar - Help

I want to dump my blackberry phone and just use my jasjar. Early reviews of the German ROM with BB Connect seemed to indicate that I would need to download an older T-Mobile ROM with an older radio stack to get BB connect to work.
Can someone point me to a good combination of a more recent ROM (english) with the BB Client software that I can use with a US T-Mobile Enterprise BB account.
thanks,
--Kia
Hi,
you can download the BBC-Client from Vodafone (German version, dunno if there's a WWE one). It's not provider locked like the T-Mobile one and works great with my Uni.
I have the latest qtek rom with radio 1.09 on it.
DD here: http://www.vodafone.de/downloadarea/BBConnect_PocketPC_BB_2.1.2.16.zip
Cheers
Blackberry connect working on unversal
I managed to get everything working. Thanks for the link. In addition here is the link to the activesync with the Blackberry desktop software.
http://support.vodafone.de/publicfiles/ActiveSyncInstaller2.1.1.9.zip
First I installed the bbclient on the uni and then the desktop software it read my settings from the other blackberry desktop (the one used with my device) automatically.
Everything is fine except when the Universal is docked it disconnects the GPRS tunnel; probabely firewall issues.
any ideas?
Re: Blackberry connect working on unversal
kbehnia said:
Everything is fine except when the Universal is docked it disconnects the GPRS tunnel; probabely firewall issues.
any ideas?
Click to expand...
Click to collapse
Glad to hear that you got it working.
The disconnect is a normal behaviour. BBConnect will always disconnect from GPRS a soon as you attach the device to ASync. AFAIK there is nothing you can do about.
Re: Blackberry connect working on unversal
kbehnia said:
I managed to get everything working. Thanks for the link. In addition here is the link to the activesync with the Blackberry desktop software.
http://support.vodafone.de/publicfiles/ActiveSyncInstaller2.1.1.9.zip
First I installed the bbclient on the uni and then the desktop software it read my settings from the other blackberry desktop (the one used with my device) automatically.
Everything is fine except when the Universal is docked it disconnects the GPRS tunnel; probabely firewall issues.
any ideas?
Click to expand...
Click to collapse
Use Airfix and checkit out, it will not kill Wireless connection while Active Sync is on. Cheers,
Strange thing - when i turn off my device (having BB client running) after i turn it back on in 10 minutes - BB is down and there is no icon in the taskbar. It does even disappear in Settings !
I've installed BB Connect on SD card.
Anybody experienced anything like that ?
Resolved.
BBConnect HAS to be installed in the main memory - no way to make it work correctly been on SD.
One more issue noticed - from the first try i was not able to see the BlackBerry folders in the list of my messanger. Messages are comming and i can preview them at the bottom of the screen, but when i goto messenger (standard) i do not see anything.
I've created a new dummy mail account and - VOILA ! i can see the BlackBerry folders. After 3-4 hours is disappeared again. :-( . I removed the dummy account and again was able to see the BB folders for a while. Then the whole story repeats.
Don't understand how to overlwhelm this.
Anybody has any ideas ?
cross coupling threads so we don't loose anybody
http://forum.xda-developers.com/posting.php?mode=reply&t=60563
dependance on phone provider.
kbehnia said:
I managed to get everything working. Thanks for the link. In addition here is the link to the activesync with the Blackberry desktop software.
http://support.vodafone.de/publicfiles/ActiveSyncInstaller2.1.1.9.zip
First I installed the bbclient on the uni and then the desktop software it read my settings from the other blackberry desktop (the one used with my device) automatically.
Everything is fine except when the Universal is docked it disconnects the GPRS tunnel; probabely firewall issues.
any ideas?
Click to expand...
Click to collapse
Do you know if this software can work with every mobile provider? I'm in spain, using vodafone but they told me doesn't support this sofware and said nothing is available to use BB in a universal...Maybe a commercial matter in order to sell BB hardware...

Internet Sharing and Vista

Hello, been using custel 2.5 for a while now, probably the day after it came out. Now I need to use internet sharing adn I`m not able to do it thru BT. When I pair my device I can do activesync just fine, but on Vistas BT manager (BT Devices) its not showing the dial-up device. This is strange it works fine with the USB connection, but I really need the BT. Please help. Thanks in advance.
BTW it used to work with wizard with WM6. Thanks
its not a dail up service to start off with its a PAN. second what BT stack are you using? I had the broadcomm stack first and that wouldnt work so i had to switch to the native MS stack and its works fine. If you know how to edit the bt.inf file on your vista machine that will install the MS stack instead of the other stack.
austinsnyc said:
its not a dail up service to start off with its a PAN. second what BT stack are you using? I had the broadcomm stack first and that wouldnt work so i had to switch to the native MS stack and its works fine. If you know how to edit the bt.inf file on your vista machine that will install the MS stack instead of the other stack.
Click to expand...
Click to collapse
Doesnt it show up in the dial-up services in vista bt device manager ? so i guess Im doint it wrong ? Is there a tutorial that I can see. I remmber on the wizard WM6 it just showed up as a dial-up device and I just dial it. How do I do it here ? Maybe I dont even have to edit anything, maybe Im just having a senior moment thx for the reply
believe it or not if you use your handheld's help program and search for internet sharing it will give you instructions on how to set it up. and no it does not show up on vista as a dail up network since it is not also search this forum for Bluetooth PAN and there is lots of info
doh I never even looked at help on the phone thanks I see how to do it now I see that on the wizard they used the old wm5 modemlink or whatever its called. thanks again but plz try to be nicer to ppl next time
yozh said:
doh I never even looked at help on the phone thanks I see how to do it now I see that on the wizard they used the old wm5 modemlink or whatever its called. thanks again but plz try to be nicer to ppl next time
Click to expand...
Click to collapse
I was being nice!! You should see me being mean!
hehe ok thanks for the tip I can't wait to get home and play
Its much better than WM5 i must say once you figure it out its so easy to use just click internet sharing and connect connect to your pc and your done its so easy
Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?
yozh said:
Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?
Click to expand...
Click to collapse
I noticed the speed decrease over PAN compared to the USB cable as well. I get way more fluctuations over BT. I am sticking to the USB but it is a nice fallback. Also, for me, Internet Sharing is a night and day difference over dial-up networking/modem driver. It is so easy. This feature is a WM6 gem!
yozh said:
Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?
Click to expand...
Click to collapse
Bluetooth is severely limited in Terms of speed, especially if you're not using Bluetooth 2.0 + EDR
gridpool said:
I noticed the speed decrease over PAN compared to the USB cable as well. I get way more fluctuations over BT. I am sticking to the USB but it is a nice fallback. Also, for me, Internet Sharing is a night and day difference over dial-up networking/modem driver. It is so easy. This feature is a WM6 gem!
Click to expand...
Click to collapse
Yeah just wish I didnt loose 500k over bluetooth
anyone else stuck with vista showing unknown device in device manager when usb tethering with internet sharing on mine it seems to work for 5 mins then disconnect and give up reverting back to unknown device. so im stuck with bluetooth
vista 64 bit
Hey Guys!
My first post with such a stupid problem:
i'm trying to connect to internet with vista 64bit using my hermes over usb. but it doesnt seem to work.
Until last week i had win xp sp3 on my pc and the internet sharing option in hermes worked without any problems. Now with Vista Ultimate 64 bit i can connect the phone to pc, sync works perfect.
when i start internet sharing, phone builds up a GPRS connection but after 2-3 sec it disconnects the data connection and active sync authentication starts with vista.
In vista i cant find any modem connection in network settings. The only thing i found was in device manager when phone is connected to pc (HTC USB Modem)
here is my spec :
- windows vista ultimate 64bit
- mobile device center 6.1
- Framework etc. is installed
my Hermes:
- HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V3_WWE_02.10.2008
- SPL 2.10 olipro
- radio ver 1.54.30.10
i have re-installed the drivers and device center several times without success.
What the hell i forgot or what i'm doing wrong...
Are there any tools or drivers i should use?
My friend has a vista 32 bit system. with his pc its no prob...some rndis drivers installed itself and we began to surf.
But in my vista 64, i missed this rndis driver installation......
Please can someone help me, i'm so confused...
Try checking your firewall... maybe disable it to test and see if it works temporarily.
Alright, thank you i'll try it on monday when i'm in office...
Ive no i-net there so i must be prepared, so are there any specific drivers or something i need to download? Or is device center enough?
Close Firewall doesnt really work...
Yesterday, i had a connection for one time...
In Device Manager, there was a "Remote ndis based Internet sharing device"
and internet worked...Today nothing works...
What have I to do in Vista? Should I deactivate some processes like wcescomm.exe? When I do this, It automatically restarts when Internet Sharing connection breaks down.
Could someone explain step by step how to get Internet Sharing work (Steps, Tools, Programs, Drivers)?!?
Thanks guys!
Same Problem
I am having the same exact problem.....
I HAD windows xp sp2 and everything worked fine once activesync was installed.....
I HAVE windows vista 64 bit and the device under the device manages show that its not working... it instals the RNDIS (whatever) drivers but dose not work...
I TRYed windows vista 32 bit, everything works fine..... the device conects with no problems...
SO the problem is that its VISTA 64bit so what would be causing this ???
btw my phone is a WM6 8525 from ATT with Internet Sharing
I need the internet sharing option when im at HomeHome and not at school, so im thinking about taking my laptop back to office depot!
So glad im not alone...
In meantime, in arranged with the prob... I think no one knows a solution...

BB Connect

BB Connect with TMO Dash - repost in the correct forum
Hi All,
I am trying to replace my company issued BB 7520 (Nextel) with a T-mobile Dash. (my personal cell)
-I have downloaded the BB Connect Cab file to the Dash and installed. Ver2.1.2.39
-I have downloaded the BB Connect for Windows Mobileto my desktop and synched the Dash ver 2.1.1.9.
- I synched my Dash, it recognized the new PIN and I created a new encryption key
- I have called Tmo and had them add the BB service to my account.
The Dash is connecting to the TMO BB Network. The identity, Status Services and IT Policy all look OK.
However, I cannot send or receive emails, and my calender is not synching. I have turned off Calender synch in Activesynch. I don't have Activesynch synching anything.
Am I missing something? When I run the BB Connect Desktop for Windows Mobile, I only get panel that looks like the redirector settings on the BB Desktop Manager.
Do I need to run the Desktop Manager when I run the BB Connect for WM?
Thanks in Advance
James
I haven't been able to get BB Connect on my Excaibur afterthe first restart of the device. It does work though if I deselect the radio button for wireless PIM. Anyone know why this (I think the BBconnect service is CICAL) is preventing BBConnect from working?
Help, I am lost now.. I had BB Connect work on my Dash, then I flashed the ROM. I have BB installed and I can receive all my emails no problem, but I can't create new or reply to emails the action is greyed out. Since this is the only way I can email I really need to get this working.
Please help!!
Thanks
I fixed it, I just had to send a service book to my phone and everything works now..
"Tmobile" Dash and BB Connect Problems Please help
I have bb connect (smartphone edition) on my dash with the blackberry plan on my account.
It works great alot better then the trigger system !
I have a issue with the internet not working properly it is really slow I have to suspend the bb connect to get it to work normal ( pain in the butt )
And also my mms messages come in as a text that directs me to a web link as instead of downloading the pictures
Any help I know a couple other people posted this issue but there was no fix
Please help Thanks
****UPDATE*****
Fixed the mms messages not coming in.
The problem was I selected the blackberry 8100 on my tmobile account so I can add the blackberry and set it up. Once I switched it to the dash. The picture messages come in just fine.
Any one out there that can help with the slow internet problem ?
Was the slow Internet problem ever figured out? I installed BB Connect 4.0 and im noticing the same problem too.
disable the bb connect when ur using the internet through status in the bb connect menu...and when u finished surfing just enable it again( disabling it is not closing it...its just suspends until ur ready to use again)
Blackberry Connect using BIS (not BES) on WM6, possible?
I am using a Rogers S621 Excalibur (Carrier, CID, & App unlocked).
On my phone I am running WM6 standard 5.2.1238 (Russian ROM)
On my computer I am running Vista.
I do have a BB Connect data plan on my account.
I have installed the BB Connect software seen here:
http://www.sems.org/entry.asp?ENTRY_ID=228
and here: http://www.sems.org/entry.asp?ENTRY_ID=225
If I try to run the Blackberry Connect Desktop for Windows Mobile it begins to start up and then says "The account is not provisioned properly on the server" and then shuts down. I don't think that is an issue as I believe the desktop client is only for BES.
On my phone when I try to select the BB Connect app and select Register now it says:
Blackberry: Not Connected
Blackberry: Network Available
Blackberry: Data Tunnel Available
Blackberry: Not connected
On the BIS (www.rogers.com/bis) when I select "Change Device" and then enter my PIN & IMEI (found on my phone by selecting Blackberry>Settings>Identity ) it says: "The information you have provided could not be verified. Please check your information and try again".
On my phone when I select Start>Blackberry>Settings>Email Settings it says "Email settings unavailable".
What have I done wrong, or what can I try?
bb connect dont work with wm6...i had it on wm5 but once i updated the rom to wm6 it stopped..happened to all of us.. some ppl got it to work by editing stuff ...but thats jsut too much to go through
My HTC S621 is running BBC for WM5 under WM6! It´s ok.
johnmud said:
My HTC S621 is running BBC for WM5 under WM6! It´s ok.
Click to expand...
Click to collapse
What carrier are you on? Rogers?
BES? or BIS?
does this means you are confirming that your S621 is indeed CID & APP unlocked ?? and this is a "software" issue ??
I was starting to get confused with other posts of yours going back & forth not knowing yes or no
http://forum.xda-developers.com/showthread.php?t=322486
&
http://forum.xda-developers.com/showthread.php?t=322486&page=3
UnicornKaz said:
does this means you are confirming that your S621 is indeed CID & APP unlocked ?? and this is a "software" issue ??
I was starting to get confused with other posts of yours going back & forth not knowing yes or no
http://forum.xda-developers.com/showthread.php?t=322486
&
http://forum.xda-developers.com/showthread.php?t=322486&page=3
Click to expand...
Click to collapse
What are you talking about? When was I "going back & forth"?
And why are you rolling your eyes at me?
And wasn't it a "software" issue the whole time? It certainly wasn't a hardware issue.
crazygman said:
I fixed it, I just had to send a service book to my phone and everything works now..
Click to expand...
Click to collapse
How did you know that the service book transfered to your handset? I did the same but there were no new service books.
BB Connect 4 and WM6
I've just installed BlackBerry Connect 4.0 on my T-Mobile Dash with WM6. It works like a charm...!!!.
Regards.
Pedro.
Hi, in order for the BB connect to work on the Dash you have to have the BB data plan through your carrier. After you install the cab, go to your website where you can manage your device, pick a blackberry as your current device and then you can send the service books. You can also call your company and ask them to send the, just tell em your using a pearl or something. ANy way after that make sure you update the pin and then your good to go. Oh by the way the current US smartphones cant multitask APN's so you will not be able to access the blackberry.net apn for mail and the wap apn for internet at the same time. In order to use the internet you must suspend the bb connect software. I have a .cab for for smartphones which works if you want one. It was designed for the dash, excalibur, etc. It works great.
cellfonejoe said:
Hi, in order for the BB connect to work on the Dash you have to have the BB data plan through your carrier. After you install the cab, go to your website where you can manage your device, pick a blackberry as your current device and then you can send the service books. You can also call your company and ask them to send the, just tell em your using a pearl or something. ANy way after that make sure you update the pin and then your good to go. Oh by the way the current US smartphones cant multitask APN's so you will not be able to access the blackberry.net apn for mail and the wap apn for internet at the same time. In order to use the internet you must suspend the bb connect software. I have a .cab for for smartphones which works if you want one. It was designed for the dash, excalibur, etc. It works great.
Click to expand...
Click to collapse
I am using 2.1.2.39 and I can get the software running, where I seem to have the problem is with the service books. TMO has another PIN and IMIE number and will not let me change it.
I can send a new service book but they are not showing up on the handset.
BB Connect 4.0 not working on WM6
Hi there,
I have my HTC S621 from Rogers with Blackberry plan and recently upgraded to WM6. When loaded with BBC 4.0. It will not connect (works well under WM5). I have seen some ppl say it works and some ppl say it does not work.
Not sure if there is a way to fix it ?
Here is the info of my HTC:
ROM: 1.27.405.1
WM6 CEOS: 5.2.1238 (build 17745.0.2.3)
radio : 4.1.13.44_02.94.90
Thx.
BB Connect question: Is it possible to change (or get a different) PIN?
Long story short, my BIS won't accept my PIN and tech support has no idea why, so changing my PIN or getting a new phone seem to be my only options.

Categories

Resources