Develop Bugs

[HELP] Dead iPAQ hx2110

Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...

well, you are sure that you are setting it into pre-bl the way you are supposed to? (it will say USB in the bottom left corner, not usb is connected) and you have deleted the whole ipaq folder off of your hard drive and (C:/ipaq) and run that service pack again right?
Your english is fine, let's try to get your device online again.

Yes, i pressed Calendar button to activate USB Mode, not USB Connected..but, still it doesn't fix the problem..
Your english is fine, let's try to get your device online again happy to hear that, thanks contradude...

sorry for being afk right now but I'm out and about (im posting this from my treo). you should take a look at the chrismrulz bootloader. its supposed to help when nothing else can. I'm surprised that the pre-bl isn't helping you fix you problem.
edit: i'll take a look tonight and see what I can do about helping you get your device up. if anyone else has any ideas, feel free to post
edit 2: I took a look around for ideas and the only one that still seems viable is grabbing another ipaq (either borrowing one from a friend or paying $10-40 on ebay and getting one you can hold onto for parts). good luck with your pda and next time don't let your excitement get in the way of methodically reading and executing the instructions. I would offer to lend my 2495 but I'm in orlando, florida usa

Wow...that's so far, shipping cost maybe will be equal to used iPAQ here...hehehe.. Thank's for your offer contradude...i really appreciate that..
Well, now i would like to show some screenshot :
Flash using SP29865 from HP :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doen't detect Model ID and ROM but, this HPRUU allow me to flash...
The Process stops at 0.1% but, the flasher lies to me it said "Congratulation..bla..bla..bla"
and this is what happened if i'm using another ROM files such as SP33303,4PDA.RU ROM,and the others...
Wrong Language, Not Connected to ActiveSync,etc.
hmm...trying to borrow another hx2000 series, but who? almost everyone in my country using PDAPhone, rarely uses PDAOnly..any plan to sell it Mr.Contra? or maybe you'll send it to me as a birthday present ? hehehe... just kidding...This is the first time i'm using Windows Mobile Based PDA's very love it..but i killed it...
Too Much love will kill you...

oxzoned said:
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
Click to expand...
Click to collapse
See if the info. in the following links are helpful
http://forum.xda-developers.com/showthread.php?t=372799

Thanks hkksl..One more question, is it possible to Flash dead iPAQ using mtty / putty ? or maybe from SD/CF Cards ?if it possible, how? is there any tutorial links ? thanks in advance..
Edit :
Last nite i dream my device running WM6..Unfortunately, i was just a dream

is it possible to use this (HTC Wizard) tutorial to flash using mtty ?
http://forum.xda-developers.com/showthread.php?t=276963

i always run all of my updates from 'white screen bootloader' aka pre-bl. hmm... that's a very interesting screenshot. is it charging the battery still when you plug it into the dock... also make sure that after it says pre-bl and you put it in the cradle that you hit the calendar button so that it goes from usb is connected to usb. also, do you have a power adapter hooked up to your dock or are you trying to do it just over USB?
as far as trying mtty, if you want to try it in a really easy form try chrismrulz' bootloader. here is the download link for it. it prepares your rom and then uses mtty to upload to your device. make sure to turn off activesync on your computer (right click on the greyed-out icon and go to options and deactivate almost all of them). then you take that, plus your original firmware rom and put it on a folder on your hard drive with no spaces in the path (i put mine in C:/bootloader). you then run bootloader.exe and just let it do it's thing. I don't click on any of the pop-ups, other than to show it where the rom is. I hope this works for you

Thank's for the reply contradude, first of all i would like flash mine with SP29795.exe (the old ROM 2003SE) if it doesn't work..then i'll try Chris Bootloader ( even tries many times but nothing happened,maybe i didn't follow the instruction well )
I'll report soon, wheter it works or not...right now, i'm not confident with my english

WOOOOHOOOOOO!!!! I've made it, now my hx2110 running WM6 4PDA Version!!! Here's the step :
1.) Download SP29795.EXE from :
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29795.exe
2.) Flash it using SP2975 RUU, it will flash your bricked iPAQ into WM2003SE 1.00.14
3.) Oops, flash completed..but some error has been occured..it won't enter WM2003SE
4.) Don't panic, reflash your iPAQ using SP29795 RUU, but swap the NBF From SP29865.exe
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29865.exe
5.) Start flashing, after finished..voila! WM2003SE 1.10.09 should works..
6.) Now, flash your iPAQ to 1.00.00L then 1.00.00H after that go to WM6... ( see copenhagen tutorial from http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66 )
7.Finished
I Would like to say thanks to Contradude, hkksl, copenhagen, Yurrix, and to everyone who made this possible.... THANKS!!!

E-ten M600 WM6.1 (kozhura Edition)

Specially thanks QwertY and tester MadDog
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:
All is like as in WM6 ROM for eten M600+, but extrom was cleaned
m600_WM6.1kE_R1 (40.8 Mb):
http://depositfiles.com/files/4121322
http://openfile.ru/33181
http://www.filefactory.com/file/1eb686/
http://ifolder.ru/5741603

That's cool. Got something to play around w/ my M600 (not plus)

Nice work kozhura, now how about a wm6.1 rom for the eten m700
If you can do it then I will treat you for dinner
Thanks any way and keep on the good work

Im planning new releases,but only at weekdays,because i have troubles with inet operators,they told me that they would deside problem in time, that i said before

Good luck with that man....ISP's are hard to argue with.

thanks
you are truly amazing, thanks a bunch. i flashed it and its really good. although the calculator doesn't work for me, if you know why, let me know.

i know this problem, ill fix it in future release

Anyone knows how to flash the .bin file on the M600?
Thnx in advance.

lagm said:
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
Click to expand...
Click to collapse
Lagm, read the Wm6.1 for M600+ thread.
Kozhura,
Just flash your rom for M600, work great and I found USB host is working natively too. But I found my San Disk 6G Micro SDHC (w/ SD adapter) is not working. Are you planning to add SDHC support later?
Maybe the same issue w/ M600+ rom, I found GPRS is not working

lagm said:
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
Click to expand...
Click to collapse
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.

kozhura said:
i know this problem, ill fix it in future release
Click to expand...
Click to collapse
ok, thanks, there are also some other little missing links and what not.

master athlon said:
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
Click to expand...
Click to collapse
Thank you master athlon.
Cheers!

can i flash back to WM5 rom 230 after i flash this?
thanks,
dgun

Yes. I just did that because GPRS is not working.
Extract the temp.dat from WM5 rom (search my old post if you dunno how), rename it as xxx.bin and copy it to the SD. Then do the same thing as how to flash this rom

M700 Wm6.1 Rom
mr.r9 said:
Nice work kozhura, now how about a wm6.1 rom for the eten m700
If you can do it then I will treat you for dinner
Thanks any way and keep on the good work
Click to expand...
Click to collapse
This ROM has 76MB of free storage space.
http://eten-users.eu/index.php?showtopic=13454

master athlon said:
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
Click to expand...
Click to collapse
You can also copy USBDLUpdate_Console.exe(=*) to the SD card, and run that file from within Windows Mobile ( no need to force bootloader mode).
That way you don't need to reboot, Program (*) will set WM to sleep start the bootloader and upgrade the Glofiish
This way you don't need EUUs, or a scary USB connection to upgrade your precious.
* USBDLUpdate_Console.exe is included in every rom update.
** Put Phone always into battery charger (do NOT connect to PC/MAC).
*** Make shure your phone is in "flight mode" (gsm / wifi / bluetooth turned off).

i think i'm gonna wait for the next release, when the gprs working..
Khozura..you are the best.
dgun

Thanks jlavoie. I am downloading the rom now.
I wish the M700 had support like this

Thanks alot

haven't seen the update yet..where is it?
Kozhura...are you still going to update this to R2?
thanks,

HTC P3300 WM6 to 6.5

hey Guys
i have a Problem
on my P3300 is wm6 Professional installed and i will wm 6.5
i have downloaded this file http://forum.xda-developers.com/showthread.php?t=513732
and i started the ROMUpdateUtility but they came a Error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and on the phone
pleace help me my english is very bad

hi 'Murat' (careful about giving away personal information when posting screenshots of your desktop)
search the forum for error 260
it's probably because you're using vista, although the screen that comes up and says to close other programs before flashing probably means INCLUDING Windows Media Player and whatever that MACOS-dock type taskbar addon is
Especially media player because it can try to make a connection with your phone as a 'removable storage' device
once you get that coloured screen up on your phone , it means your device is in bootloader mode
you can try to run the update again once the phone is already in that state and it might fix it.
if not, as i said, search the forum ... you might need to change your device drivers
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
this might also be a good time to point out theat there is also a v44 version of that rom on here, rather than the v43 you're trying to use

d-signet said:
search the forum for error 260
it's probably because you're using vista
once you get that coloured screen up, it means your device is in bootloader mode
you can try to run the update again once the phone is in that state and it might fix it.
if not, as i said, search the forum
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
Click to expand...
Click to collapse
sorry my english is very bad
can i flash this ROM on my Device??
i cant find error 260 in the forum. can you pleace help me for this problem i will wm6.5 on my device an touch flo
PLEACE HELP ME
yes i have vista 32-bit

Hi,
good idea for the phone screen but we can't read the numbers so you can just give them. i think SPL 3.13.0000 so you haven't Unlock your device.
1- Unlock your device http://forum.xda-developers.com/showthread.php?t=311403
2- if it's good, your numbers on bootloader (screen 3 colors) have changed normally in 1.11.xxx
3- you can now flash your device with your wm6.5 rom.
And yes use search for help you if always problem.

IPL 3.13.0001
SPL 3.13.0000
thx
i unlock my phone

hy
i will unlock my device but the dos window is 100% complete and he came the error 260
im a noob

Which program do you use for connect your device to vista?

Active Sync and vista not compatible
i have no programm
i have the connect the device on my pc per USB and my pc has find the phone for windows mobile device

ok try this soft for synchron device to PC
http://www.commentcamarche.net/faq/sujet-5337-activesync-et-windows-vista

i have no programm
what for a program i install for this phone??

look the link 2 post before.
Sorry i have big lag and it's very long for edit

ok thanks wait pleace

i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash

d-signet said:
i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash
Click to expand...
Click to collapse
hy
i will in the bootloader mode
how i make
sry my english

sorry, I don't think i understand your question
to put your phone into bootloader mode, hold the RECORD/NOTES button and press the stylus into the reset hole at the same time.
Then you get the coloured stripes screen like your screenshot (that is bootloader mode)
First you need to USPL your phone. This makes SPL version 1.11.0000
Don't upgrade the rom until you can see :
SPL 1.11.0000
when you reset
search the forum for help or follow the link earlier

hy
i installed windows mobile device center and have connect my phone with my pc its OK
but
i will install the unlock "DOS Window 100%---------his open automatic ROMUpdateUtility and my P3300 have a white screen and is not more connected with the WMDC"
i pushed the Reset Button
pleace help
i search 1 week for this problem
pleace GUYS

hy thanks for you help
i cant find the RECORD/NOTES button
can you pleace help me
sry but my english ist very very bad

Try to run the "start_uspl" from Artemis_USPL but i think you must:
1 instal the program for synchron with vista,
2 connect your device but not in bootloader, you must see the today screen on your device.
3 only when synchron is finished you can run the "start_uspl" for unlock your device.
4 if there is no error and when the process is finished, normally he ask for restart device, and look if the numbers 3.13 is change in 1.11
Edit if there is an error (white screen, etc) try to run the "start_uspl" again and again. It will finish by working, i had to try many times before it really working.

but when the prozess finished "dos window 100%" my phone display is white an the connection to the PC is deactive

hy LeTo08
i have testing you TUTORIAL but this not completly
here the pictures
HELP

Samsung i780 PDA ok PHONE not ok!?

Hello ,
Can anybody help i have i780 and there was WM6.5 23412 and i tried to update it to 23420 or 23071 but with both of these rom i got problem with flashing PHONE with mirage but failing in 50-70 % depending the size of rom..
I have had done it before to and no problems wasnt then ,and right know i have only pda functions and in the version button in settings there is only PDA number PHONE is blank,
using windows 7 and virtual windows xp!
Can anybody tell what may go wrong?
I have tried different things but neither on them working!
Sry my bad english!

Man, just realised what are you doing.
You are trying to flash PDA part to PHONE
All ROM's that are cooked are only PDA part!
PHONE part stills untouch!
You have now to reflash PDA and PHONE from offical samsung firmware.
After that you flash ONLY PDA part from any new version found here.
Good luck!

Just for case:I just say that with wm6.5 all was working probably. after ja try phone side was writing filed , last thing what i was tried was PDA side over flash in it worked! BUT PHONE side of mirage fail writing!

arxxx86 said:
Just for case:I just say that with wm6.5 all was working probably. after ja try phone side was writing filed , last thing what i was tried was PDA side over flash in it worked! BUT PHONE side of mirage fail writing!
Click to expand...
Click to collapse
Ah thats simple. To flash phone part flasher changes usb state to cdma modem driver. So u need to install it first.
CDMA Modem Drivers:
XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970110&coflag=0
Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970108&coflag=0

failed!
Device name:6&22194588&0&1
EBoot version=01.35
Start downloading...
PHONE-Switching USB to PHONE...
PHONE-COM3 detected
PHONE-Attempting to open COM 3...
PHONE-Create COM 3 succeed...
PHONE-Opening COM 3 succeed...
PHONE-Waiting for erasing CODE area...
PHONE-Erasing CODE area complete...
PHONE-Writing failed at 69.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Man you make me smiling! I wrote about this mistake before!
Look where you have to flash new ROM's - it"s PDA part (not PHONE)
So now phone part is wrong, because you have flash it with pda bin.
Make nwo next procedure:
Open in "PDA" : WM6.5.. ..bin
Open in "Phone": phone.bin (find download link below)
Flash! After first boot make hard reset.
Good luck
Phone part http://www.mediafire.com/file/mnzyd2mzdi5/PHONE.rar. Dont forget to upack phone.bin from rar

thank you! It worked ! I understand i before wanted to but pda to phone part!
but firstly when i got that mobile there was wm6.0 then i upgrade it to 6.1 and then with bin fail 6.5 but i remembered that i put both wm6.5 bin to pda and phone part and then it worked... or i might done something differently
anyway big thanks to you

Thank You
I had the same Problem i had already flashed Samsung Official rom at the end But fails to write the Phone with official .bin for phone..its giving error at Exactly 50%..
Let me try Your method..Hope it works for me too..
Thanks in Advance

hi mate
I have tried Your method of only flashing the Phone.bin (as per attached Pic)
I think there is some serious problem with the flashing part or the tool ...
may be the new version of Multi Downloader has any option to revive the Phone ..
Currently My phone has NO Network.
Can You help me...

Try some solutions:
1. download with phone part from (link I provided before).
2. There can be another trouble with CDMA drivers or USB. XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970107&coflag=0 Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970109&coflag=0
Reinstall drivers. Connect USB to rear of PC not front. retry
3. download full upgrade (including upgadetool) XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970112&coflag=0 Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970111&coflag=0
4. If doesnt help- try to flash on another PC with XP or Win7(use XP drivers).

Heineken78,
thanks for your help. I made the same mistake - flashed the phone part - and had a bit of trouble finding out how the solve the problem. Your solution is very easy to implement and very effective.
Thanks a lot!

[Q] Samsung Apps Problem

Hello guys,
This is my problem: When I open Samsung Apps at my phone, it gives to loading screen and after that it crashes, it just goes back to the home screen.
I think this is because I updated Samung Apps at a 3G network, but the connection was lost, so it didn't finish the update...
I just dit a factory reset, but it still crashes...
And when I open Kies, it says there is an update for Samsung Apps. But when I click on `update` it says that the latest version is already installed.
Is there a way to reset samsung apps? To remove and re install it?
Much thanks, Thijmen.

Im having same problem. I recently updated my phone's firmware to Bada 2.0. Straight away i tried to go to Samsung apps, but it shouted it needed to be updates. Well, update it is... My phone anyway jammed during the installation of update. Well, i rebooted it, but afterwards samsung apps doesn't open up on my mobile. It just opens the Samsung apps splash screen and goes back to menu or desktop, where ever i try to open it up.
Things i've tried to resolve this problem:
1. Factory reset, did nothing
2. Hard reset, didn't help
3. Tried to remove folder Samsung Apps from mobile with TK file explorer and stune, didn't work out. Not sure if it was right directory tho. Was something like AppEx\SamsungApps
Is there a way to re-install Samsung apps app?
Any help will be appreciated

You must flash the ShpApp.app of your firmware with multiloader. Write *#1234# to know your firmware version, then download the firmware and use multiloader to flash lite the Shpapp only.

Thanks Aurex for your response. It's very informative.
ok, so im going to do this thing.... I am downloading the firmware, but im not fully sure which one i should grab...
PDA Bada CSC Country/Carrier
S8500XXLD2 2.0 S8500OXBLC1 Sweden
S8500XXLD2 2.0 S8500OXBLC1 Nordic countries
S8500XXLD2 2.0 S8500OXBLC1 Sweden
There's 3 firmwares with exact same sw/csc details. None of those say it's suitable for Finnish version though. Can i still use those for this purpose?
Is there some guide to flash this thing only or do i have to fiqure it out myself?
And does this small flashing lose my personal data?

You can use what you want of this 3 firmware, no problem Open multiloader and don't select full firmware and bootfiles and select only SHPAPP. Take your ShpApp and click on Port Search and Download. No data lose.
But...have you ever flash before?

To be honest, i haven't never even seen a multiloader I've always flashed my firmware the legal ways (kies). But it can't be that hard, can it?
Does it matter what version of multiloader i use?

Here Multiloader 5.67
First of all you must go in download mode, so, press at the same time:
1. Volume Down Button
2. End Call Button
3. Lock Button
This is the download mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect your wave on pc with usb.
Then open Multiloader and select LSI and click on SHPAPP. Select your ShpApp and then click on Port Search and Download:

Ok, now i got firmware and multiloader 5.65. Only thing i need to do on the app is insert ShpApp.app to it's place?
EDIT: you answered me faster than i could post... So im trying to follow your instructions, but i port search ain't working. It just goes grey for couple seconds and comes back, nothing happens. Can't press download button.

Beezip said:
EDIT: you answered me faster than i could post... So im trying to follow your instructions, but i port search ain't working. It just goes grey for couple seconds and comes back, nothing happens. Can't press download button.
Click to expand...
Click to collapse
Ok, so: open Samsung Kies and go to "Tools" (I think ) and "errors in troubleshooting connections" (or something similar). You need drivers.

Well, i managed to handle it with another computer. Percentages started running, will see what happens...
---------- Post added at 03:07 PM ---------- Previous post was at 02:58 PM ----------
Damn dude, it worked. Thanks so much!

Beezip said:
Damn dude, it worked. Thanks so much!
Click to expand...
Click to collapse
I'm happy!