how do i run nh or custom ruu files - Upgrading, Modifying and Unlocking

i just downloaded a 6.1 rom and want to install it..every time i try to run the ruu it says application failed to initialize properly ...any help?

what device?
try take your pda to PreBL mode

Related

Flash update failed during update

I tried updating both the PDA ROM and the RSU.
The PDA ROM updated OK, to 3.2.17 and then I tried to upgrade the RSU to 4.21.
Basically I got to 1% loaded then got a message saying the Flash Update failed. The device re-starts then I get the same error.
Tried deleting the PROGRAMME B from the start menu, removing it then tryong again, no joy.
Any ideas?
Code:
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
HTH
Stefan

Please help ROM Update corrupted

Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
run auto and follow instruction but if you flash your phone under windows vista or win7 Rom update process may be corrupted. I had same problem with win7 and vista , I can flash my rom under windowsxp now .
lenoxcr said:
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
Click to expand...
Click to collapse
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=540492 . Hope that helps
error 270
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
goer's d ignasia said:
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
Click to expand...
Click to collapse
Take your time to read the sticky & use the search.... It's a question that get asks so many times and answered so many too...

[Error 226] My phone is brick ?

Hello,
After a flash of GenY 1.1 by MTTY (and internal storage) the flash stop at 71% with a 226 error.
Now I can't flash HardSPL (flash goes to 100% but the version of my HSPL in bootloader still the same !). I can't flash on official rom (stop at 61% with same error code).
Anyone now if it's possible to do something for that ?
Thanks
PS : sorry for my english !
I can never change my hardspl without using the jumpspl technique as in link below for hardspl 1.24
http://forum.xda-developers.com/showthread.php?t=408621
It always stays the same despite reaching 100%
HTH
Bixx
Try:
http://forum.xda-developers.com/showpost.php?p=1518700&postcount=11
Hi !
I've tried to flash HSPL 1.24 but like my phone doesn't boot, I can't copy and execute JumpSPL.exe and the RomUpdateUtility can't flash the HSPL.
JR_de > i's for the trinity, the 1.20 Olipro it's not for diamond, and I'm no SuperCID.
I've tried with 1.40 Olinex Unsigned with mtty command in your link but still the same error when I flash an official rom (2.03.406....)
thanks for your answers
try to change the usb port from pc and still try yr phone is not brick
I try with another usb port, and another computer, the results it's the same !
tom62 said:
I try with another usb port, and another computer, the results it's the same !
Click to expand...
Click to collapse
ever tried to change the usb cable?
Yes I try to flash with a second usb cable....
I believe there is no solution !
OS?
On what OS are you trying this?
Windows XP / Vista / 7 32bit? 64Bit?
Try this: http://forum.xda-developers.com/showthread.php?t=578231
is there a bootble ROM on it?
if so , download a stock image from HTC and copy to top level of your 4GB
reset and press the enter and back buttons
follow on screen instructions
i recomend that you flash like this, much safer
good luck
hello, happy new year everybody !!
there is no bootble ROM on my diamond.
I have no access to the internal storage, I can't copy a nbh file on it.
I try to flash an hspl with change .nbh after click on the first "next" in the customRuu, but the version of the hspl always doesn't change, and error 260 when I flash an OS rom...
nobody has a solution ?!
Try and flash back to stock SPL, check my sig
after that, try and flash stock OS
if either fail, send to HTC
Good Luck
Badwolve1

help me Your OS isn't customized

Your OS isn't customized
for your hardware.
Please reflash the proper
ROM code or contart the
service crnter
DIAM120 64M
SLP-1.39.0000
MicroP-Diam ATAGE_PVT v0x32
IMEI 357568011556722
SN HT842GN29676
help me
Lets try again...this time different approach.
Okay lets try to save your device again.
Solution 1
-Remove your battery. Yes! Remove your battery.
-Keep it out for 10 minutes
-After 10 minutes have passed. Insert your battery.
-Now switch ON your device and see what happens.
IF YOU STILL get the same message, then repeat Solution 1 again for 15 minutes this time.
IF that did not work come to Solution 2
Solution 2
Step 1.
PUT UR DEVICE IN BOOTLOADER MODE. Press reset button with stylus and keep holding volume down key.
Step 2. Download this, extract and try to install
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Now go to BOOTLOADER MODE again. Your SPL should be 1.40.Olinex
Step 3. Download this, extract and try to install
http://www.4shared.com/file/W25srZQT/DiamonCustomRUU_Radio_1002505.html
Step 4. Download this, extract and try to install
http://rapidshare.com/#!download|706l3|261693573|Diamond_Cloudy_1.3.zip|73779
IF YOUR Device is working again. Let me know. Then we will find a solution to have chinese on your device again.
Step 4. Download this, extract and try to install
http://rapidshare.com/#!download|706..._1.3.zip|73779
can't download it
Step 2. Download this, extract and try to install
http://forum.xda-developers.com/atta...2&d=1213719705
stop 0%
What is your SPL from bootloader mode.
Is it 1.40.Olinex
Btw is your diamond htc branded or dopod branded?
Still 1.39.00
my diamond is htc branded
Lets try HSPL 1.93 then
Download and try to see if you can install via BOOTLOADER mode
http://forum.xda-developers.com/attachment.php?attachmentid=474155&stc=1&d=1293448754
If successful your SPL should be 1.93.Olinex
Lemme know what happens
If HSPL 1.93 has been successfull, you can try this ROM
AZTOR (AlphaZero)
http://xdadev.f1ip.net/index.php?dir=Diamond/Roms/AlphaZero/&file=AZTOR-V6-WWE.rar
or any other rom of your choice.
I NEED S910 Original ROM
So its dopod after all eh..
Here you go. This is for dopod s910
http://shipped-roms.com/download.ph...52.66.25.35_1.15.25.14_Test.exe&send_file=yes
flash and tell us what happens

Prestigio 4500T Duo need to revive

I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Nobody answers? Please can anybody help me?
ddqgarces said:
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Click to expand...
Click to collapse
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
jaskooo said:
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
Click to expand...
Click to collapse
Thanks for your help, I have a boot.img of the stock rom, I put in the same folder of MT6577_Android_scatter_emmc and CheckSum.ini , but when I try to download via SP flash tool I get this error:
Image Bootimg checksum failed! Checksum reference value (0x5583) in the config.ini file.
Please re-fill correct checksum values in checksum.ini.
I don't know what are the checksum values, can you tell me where i can find these values?
I am getting this DRAM error, because I don't have the correct files to flash in SP flash tool.
Please can you give me all those files needed to put a whole new firmware in y phone, I need the preloader file, and etc.
My phone can't detect preloader, as it did, and I can't boot it, it's like dead, only appears a red light when I connect to pc and a MTk USB Port (COM).
Please help me with the files needed to flash my whole phone in sp flash tool
Need full ROM with scatter file
Hi Guys, I am looking for full ROM including scatter file for PAP4500T. I need it to load all needed (Preloader, MBR, EBR1, UBOOT, BOOTIMG, RECOVERY, SEC_RO, LOGO, EBR2, ANDROID, CACHE, USRDATA) in to the SP Flash Tool. It can be from Stock or any working ROM. If You could provide me Working ROM with all these and with scatter file which will load everithink to the SPflashTool I would really appreciate that.
Thank You in advance.

Categories

Resources