Develop Bugs

GPS camera in WM6

Hello everybody,
After having unpgraded to WM6 I no longer have the GPS camera function I have enjoyed in the WM5 Dopod rom...
In life you cannot have everything! Well, maybe in the Artemis (part of life) you can!
Does anyone know a tweak to enable this useful function again?
Thanx

Hello SiperX,
If you want to put in GPS Position in automatic in a picture chance the follow in registry:
Go to HKLM/ Software/Htc/Camera/P9
and set enable to '1'
Than you got to do an soft reset.
it´s the sam as WM5.
Than the funktion apears!
Have a nice day

Right nickname!
rescue01 said:
Hello SiperX,
If you want to put in GPS Position in automatic in a picture chance the follow in registry:
Go to HKLM/ Software/Htc/Camera/P9
and set enable to '1'
Than you got to do an soft reset.
it´s the sam as WM5.
Than the funktion apears!
Have a nice day
Click to expand...
Click to collapse
Not for nothing you have chosen "RESCUE 01" as an alias!!!
With your tip I fixed it right away!
Thanks a lot man...

rescue01 said:
Hello SiperX,
If you want to put in GPS Position in automatic in a picture chance the follow in registry:
Go to HKLM/ Software/Htc/Camera/P9
and set enable to '1'
Than you got to do an soft reset.
it´s the sam as WM5.
Than the funktion apears!
Have a nice day
Click to expand...
Click to collapse
@rescue01
thnx for the tip... It works great now ;-)

Is it possible to use it in HTC (Elf) ?? Does it support External GPS device? Thanks

I don't think GPS Photo will work with external GPS receiver. It's also not available in some other devices with internal GPS like the Trinity.

Worked perfectly thanks
but when i activate it on the camera mode it says
"cannot initialise the gps service"
any help?
thanks

Flash Touch 3.01 or O2 Premium 2.0. Both offer working GPS Photo. Also the official WWE ROM for Asia (Europe has no GPS Photo for some reason) has this extra

rescue01 said:
Hello SiperX,
If you want to put in GPS Position in automatic in a picture chance the follow in registry:
Go to HKLM/ Software/Htc/Camera/P9
and set enable to '1'
Than you got to do an soft reset.
it´s the sam as WM5.
Than the funktion apears!
Have a nice day
Click to expand...
Click to collapse
Its already set like u mention
& even with Kaiser Tweak
It shows GPS Photo - Enabled
but still it just keeps searching & doesnt set in to click a Picture
anyone ?

2 Problems with Bepe

Hi,
i've now installed WM6 Rom from bepe. Its quite nice but i've 2 problems. The Touch Keypad looks the same like the Touch Keyboard.
My second problem is that i don't know the right port configuration for tomtom.
GDP1 and COM9 ? <- not working
Greetz

Tips..
The Touch keyboard and the Touch keypad look the same but when you go to explorer and surf the internet the Touch Keypad changes....
And with TOMTOM have you tried selecting "another NMEA GPS-reciever" then setting your "Baudspeed" to 115200 and then select GPS in com9...
works for me....

Hi,
i've now installed WM6 Rom from bepe. Its quite nice but i've 2 problems. The Touch Keypad looks the same like the Touch Keyboard.
Click to expand...
Click to collapse
What's the problem?
My second problem is that i don't know the right port configuration for tomtom.
GDP1 and COM9 ? <- not working
Greetz
Click to expand...
Click to collapse
GPS Should work by default. GDP1 and COM9 are correct.
I've had this problem with Bepe's very first ROM as well. Maybe you can try a different radio version?

Now i'll try "another NMEA GPS-reciever" before it was "Internal GPS".
The Problem is, i thought it should look different the Keypad and the Keyboard.

Wifi scanner with GPS

Hello guys
I am sorry if i am asking my question in the wrong forum.
But i need a program for my HTC P3300 that can scan for wifi accespoints and save the gps position of this.
Usefull suggestions will be appreciated.

highboy said:
Hello guys
I am sorry if i am asking my question in the wrong forum.
But i need a program for my HTC P3300 that can scan for wifi accespoints and save the gps position of this.
Usefull suggestions will be appreciated.
Click to expand...
Click to collapse
wififofum does that.

highboy said:
Hello guys
I am sorry if i am asking my question in the wrong forum.
But i need a program for my HTC P3300 that can scan for wifi accespoints and save the gps position of this.
Usefull suggestions will be appreciated.
Click to expand...
Click to collapse
heya
i dont think you can fun such a utility instead u can use the combination of
quickgps to get updates about the satellites to get quick gps fixing
wififofum to get save the configuration of access point
any gps programme such as navigotn tomtom destinator
the previous author said that wififofum can do it but i could not see it in my version - can u please elaborate

u can use airomap!!

tejen said:
u can use airomap!!
Click to expand...
Click to collapse
Thanks a lot m8, just what i was looking for.

Navizon and you can earn money from it

tajw said:
Navizon and you can earn money from it
Click to expand...
Click to collapse
didnt work very well on my MDACIII... only got 200 points from a 60 mile drive...
Also, you cant see the GPS position of APs.

jahrami said:
heya
i dont think you can fun such a utility instead u can use the combination of
quickgps to get updates about the satellites to get quick gps fixing
wififofum to get save the configuration of access point
any gps programme such as navigotn tomtom destinator
the previous author said that wififofum can do it but i could not see it in my version - can u please elaborate
Click to expand...
Click to collapse
I think the logs are in xml format. I haven't got it installed at the moment. You can read them with Google Earth and then export to TomTom ov (POI) files or use POIconverter for that. I don't think you can export directly to a folder in which you have a TomTom map, but what is TS looking for exactly?

[31.07.2009] TMC now working without external Hardware!!!

Hi,
Tmc work on Touch HD with a little tool (attached here).
TMC developers thread: http://forum.xda-developers.com/showthread.php?t=497977
beemers TMC thread: http://forum.xda-developers.com/showthread.php?t=512630
Load and install the two attached cab files, then:
start HyperGPS
select a free Com Port for TMC
go to menu > Test and search TMC with the arrows
message RTTMC in receive windows means TMC available (Pic 4)
if TMC found, close test windows with OK
leave HyperGPS in the background and start iGO
go to settings > TMC
search a TMC broadcaster
What is new in Beta 8:
-Full GNS protocol support. Tested under iGO and Navigon
GNS needs TMC+GPS option to be selected althought if it is not, HyperGPS will send fake GPS sentences.
-Less CPU consumption and lower memory footprint
-Optimized test program: Now RSSI is correctly shown under Royaltek mode, unused buttons are hidden under GNS mode and all the behaviour has been polished.
-RDS and TMC indicator in test program.
-Log mode redesigned to make more useful and readable logs.
-Removed fake RDS message under Royaltek mode. Not necessary with correct timmings.
-Soved an issue with block ratio not always sent.
my iGO settings in system.ini:
[tmc]
saved_config_available="0"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
saved_last_tuning_mode="0"
auto_tuning="0"
saved_last_frequency="1047"
YouTube - TMC and iGO
Special thanks to beemerTPPC and all TMC developers.
with friendly greet
starbase64

You guys are incredible, and xda-dev is an amazing forum!!!!!!!
When, even iGO responsibles of the support section strictly answer that the HD isn't able to provide a TMC function with its radio receiver, you still believe that it's possible, give yourselves the means to make it happen, and success!!!!
BRAVO!!!
...'ll test this soon

it doesnt work on my hd....
tested all the com ports but no way.... it says it cannot open com port....
I have installed both the files, any help ???
Mau

TMC found in iGo, but no TMC-stations can be found in Sweden so far...

Does this work in the UK with iGO8? Reason why i ask that TMC is found in iGO8 but no TMC stations found. I have the headset plugged in and it's scanned all FM radio frequencies (testing.... no TMC signal found). The funny thing is, on the main screen where the TMC icon is, i have a yellow envelope. Clicking the car icon, then the car icon in a triangle, it takes me to a section called "Traffic Alerts" where 2 events are listed for roadworks. (1. A3211 westminster bridge - tower bridge & 2. A23 thorton - heath purley). So it must have picked up a signal at some point. Any help please ?

starbase64,
thanks a lot. I just follow in last two weeks all efforts (thanks to flywhc and other team) to obtain TMC function avalaible on htc devices. In my case I have a touch HD. Now I just installed u sw, and config and TMC signal is OK. Now remain only to test on the road...
Thanks again. I hope to give u feedback asap.

It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.

WOW! This is so good. HTC dvices always have hidden options. The only bad thing is missing tmc services in my coutry, macedonia

Griff1 said:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
Click to expand...
Click to collapse
Same problem here, worked once, and then after softreset cannot open com port anymore.

I know,gutted or what.
I'm just pondering a hard reset,would rather not but i really want this working.
EDIT: I might wait a while till my next Dutty rom,will probably be soon,lol.

Griff1 said:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission.
Click to expand...
Click to collapse
same here aswell using dutty`s v3.3XT

Gotta be realistic, while its nice to have, this is "only" OpenTMC, in Germany known to be around 20-40 minutes behind real traffic situation. This is not TMCPro with realtime traffic data through road sensors.
But indeed it is fantastic for the masterminds behind this activation to have achieved this. Respect.
OpenTMC around the world: http://en.wikipedia.org/wiki/Traffic_Message_Channel#TMC_services_in_operation

stokesie said:
same here aswell using dutty`s v3.3XT
Click to expand...
Click to collapse
Same here, using dutty's 3.3. I downloaded the setup files from here http://forum.xda-developers.com/showthread.php?p=3730090#post3730090 (page 35) and reinstalled and all working again.
Also, anyone know what frequency UK TMC is broadcast on?

works on htc diamond?

Originally Posted by Griff1 View Post:
It worked once and then it broke.
It says it cant load the driver so i uninstalled,re installed beemercert.cab and then tried to reinstall the app but now it say it can't as it doesn't have permission"
Same problem here, worked once, and then after softreset cannot open com port anymore.

IO ME MEDESIMO said:
works on htc diamond?
Click to expand...
Click to collapse
Yes, it does.

works nice with my blackstone and tmc is found here in NRW.
but
after close/restart it still works due to the driver is still loaded but as soon as its beeing unloaded for the first time I get the same error that driver cannot be loaded again - check COM port or install certs. even after softreset and reinstalling certs it doesnt work until i replace gfmapi.dll in \windows

usrname said:
it doesnt work until i replace gfmapi.dll in \windows
Click to expand...
Click to collapse
Thats what i'm finding too.

Does it work in netherlands

Have you read the messages in this thread? Hint: Post 12

Nav n Go - iGO 8

Hello there,
Which version of iGO8 works for the Rhodium?
I've tried various releases and still had not been able to make it work!
Thanks in advance
Yuval lavie

Yuuvi said:
Hello there,
Which version of iGO8 works for the Rhodium?
I've tried various releases and still had not been able to make it work!
Thanks in advance
Yuval lavie
Click to expand...
Click to collapse
Look in many of the threads already here. In general, you can say that all the official PDA releases work. These are 8.3.2.64029, 87762 and 97313. (Maybe more). With these versions a very basic sys.txt (as supplied with these versions) will work, as long as you add:
[device]
sdcard_dsk_num=7
(It took me three days to find this out...)

andrehj said:
Look in many of the threads already here. In general, you can say that all the official PDA releases work. These are 8.3.2.64029, 87762 and 97313. (Maybe more). With these versions a very basic sys.txt (as supplied with these versions) will work, as long as you add:
[device]
sdcard_dsk_num=7
(It took me three days to find this out...)
Click to expand...
Click to collapse
I had problems getting mine to work also. All I did was a fresh install, nothing edited in sys.exe, but I replaced data.zip with a newer version and it seems to be working fine!

I am ruining 8.3.2.93122 and it runs just fine.

Just to confirm it runs ok with version 8.3.2.1972 on the TP2 with these settings in sys.txt
[interface]
show_exit=1
[rawdisplay]
screen_x=480
screen_y=800
class="portrait"
[device]
sdcard_dsk_num=7
[folders]
App="Storage card/iGo8"
Click to expand...
Click to collapse

andrehj said:
[device]
sdcard_dsk_num=7
Click to expand...
Click to collapse
In fact, what does it mean ?

I guess it's giving iGO the correct location of the sdcard i.e. disk number 7.
(I'm also guessing) The other 6 disks will be internal storage/ROM/backup ROM/etc.

ok, but it´s strange as App looks for "Storage card"
Code:
[folders]
App="[i]Storage card[/i]/iGo8"
... it´s just to understand ...

Whatever I install, I keep getting "Initialization error: no language files were found"
any help ?

do you have insert(copied) a Lang_YourLanguage.zip
you will find this on
-iGO
-CONTENT
-LANG
greetz

Aight, so I fixed all these problems and the program works great with all maps etc.
but it doesnt know how to determine where I am..
I'm telling it to take me to some place, and it creates a way like I'm in Jerusalem, while im not there xD...

IGO8 dont find my internal GPS???
Hi,
the programm and the maps work fine on my TP2 but he always shows me:
no GPSdriver found!
Igo dont find my internal GPS, any ideas???
thx

look in the settings
Port 4
Baudrate 57600
Change in the registry
HKLM\System\CurrentControlSet\
GPS IntermediateDriver\Drivers\GPSOneDevice\
PollInterval = 100
and delete these (GPSLogFile.txt+
GPSLogFileBack.txt) files you will find in the \Windows\ folder
take a softreset, then run QuickGPS or if you have time
without QuickGPS...
greetz

hm...ty for the tip...
but nothing change!
igo shows me after autoscan:"no gps driver found"
on Google Maps it works fine with the internal GPS

Schnalle said:
Hi,
the programm and the maps work fine on my TP2 but he always shows me:
no GPSdriver found!
Igo dont find my internal GPS, any ideas???
thx
Click to expand...
Click to collapse
Schnalla,
What regional settings are you using?
For me strangly enough I found that when my local are set to anyting other then English iGo doesn't find the GPS receiver.
So try changing local to English UK or the like (might need a restart).
Then go to iGo GPS settings and run the automatic scan for GPS device.
It worked for me.
Once the GPS receiver is found you can change the Regional settings back to whatever you had before.

IGO8 Problem
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney

ranney said:
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
Click to expand...
Click to collapse
I've found some information here: http://forum.xda-developers.com/showthread.php?t=526679&highlight=igo8
But is there an another solution to get it working without resetting the device or disable the TF 3D?
It must have a (Simple?) reason becouse it will work after a reset but not anymore after some time...
Thanks in advance!
Ranney

i am using the same sd card from my tp1 (nothing changed). igo 8.3 is working perfectly.

ranney said:
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
Click to expand...
Click to collapse
hi ranney
with which version tts is working on your tp2?
greez
emanuel

emanuel-paul said:
hi ranney
with which version tts is working on your tp2?
greez
emanuel
Click to expand...
Click to collapse
Hi emanuel,
I've got version 8.3.2.93112. But also problems with TTS now. When I set the voice in IGO to a basic version (non TTS), close igo, reboot, start igo and set it to a TTS ==> it's working. but after shutting it down and restarting ==> TTS is not longer working. (And after a day, IGO cannot be started anymore and the device had to soft reset to let IGO run again...
Ranney