I need aid HTC ARTEMIS does not ignite I remain without battery and when I put it to load no longer ignited, I have done hard reset and when resumption does not enter Windows remains in the screen where it puts HTC and in the part of above it puts the version and no longer it does nothing else.
sorry but i dont know speak english i use a web translator
treste said:
I need aid HTC ARTEMIS does not ignite I remain without battery and when I put it to load no longer ignited, I have done hard reset and when resumption does not enter Windows remains in the screen where it puts HTC and in the part of above it puts the version and no longer it does nothing else.
sorry but i dont know speak english i use a web translator
Click to expand...
Click to collapse
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
Related
I was in the middle of upgrading my version of WM6 and i got unplugged and now it wont resume and the phone is stuck at the loading screen that says "HTC" mobile.htc.com
what the heck do i do? it wont budge.. it wont sync with active sync, it wont resume.. i'm flipping out.
did you try get your phone in the tri color bootloader screen and then running the Hard SPL program again?
god, I'm gonna admit, I have no idea what any of that stuff is. I know the tricolor screen, I dont know what an SPL is.. a friend of mine usually sends me the upgrades for my programs and i just follow his instructions, but as i was loading the new version it got unplugged and when i tried to follow the restore options it wouldnt restore the upgrade.. so I've learned the term is bricking.
Activesync won't reconnect the phone.. it tries, then doesnt recognize the device.. so even if i try to downgrade to 1.04, it wont work because it wont sync with the damn computer.. I hard reset, i soft reset, i got it to the tricolor screen, i tried all the stuff in the hermes upgrade problems thread, but i dont know wtf i'm doing. the file mtty.exe wont work.. it just freezes at whatever screen i happen to get it to, be it the tricolor or the HTC screen.
please, someone help me out.. I apologize in advance for not being as savvy as everyone else, but I need some advice here.
Go the tri colour screen
press both soft buttons (the ones that interact with the screen) and insert the stylus and reset.
from here you can make an hard reset. Whenever my phone hangs (or whatever) I use this way BUT i use the cancel button (X) and the phone simply restarts fine
Did u hard SPL your device?
Costanza said:
press both soft buttons (the ones that interact with the screen) and insert the stylus and reset.
from here you can make an hard reset. Whenever my phone hangs (or whatever) I use this way BUT i use the cancel button (X) and the phone simply restarts fine
Click to expand...
Click to collapse
I hard reset, I soft reset, it freezes either way. The only way the computer recognizes the phone is when I get the tricolor screen but active sync wont connect to FINISH loading the upgrade.
antonlim1999 said:
Did u hard SPL your device?
Click to expand...
Click to collapse
I cant because it wont connect to activesync to install anything else.. i cant dongrade, upgrade, nothing! i cant get to version 1.04 from the 1.06 im running because activesync wont recognize my phone.
I think antonlim1999 mean, did you hard-spl before you even upgrade to wm06 or not ?
sg10 said:
I think antonlim1999 mean, did you hard-spl before you even upgrade to wm06 or not ?
Click to expand...
Click to collapse
I already had wm6, i was just getting a better version that didnt have as many bugs.. I began loading it, it got to 45%, then the cat knocked the cable out and it got messed up.. I dont believe it was hard-spl beforehand.. im gonna go with no.
Could you try to SPL in the tri colour mode (as you have contact between the unit and the PC)?
Link below has all (almost) info
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
A warning to those with an aversion to reading
This is a warning to those who don't really know what they're doing. Upgrading a ROM on a WinMo device is something that should only be done when you know what you're doing.
Hope your device can upgrade well, but please, take the time to actually read the wiki and forum before upgrading again, for your own wallets sake.
hiddenconcepts said:
I was in the middle of upgrading my version of WM6 and i got unplugged and now it wont resume and the phone is stuck at the loading screen that says "HTC" mobile.htc.com
what the heck do i do? it wont budge.. it wont sync with active sync, it wont resume.. i'm flipping out.
Click to expand...
Click to collapse
You are not even in the right forum, you'll get better help elsewhere.
Start reading here: http://forum.xda-developers.com/showthread.php?t=286755
Hard SPL thread: http://forum.xda-developers.com/showthread.php?t=296722
philjohn said:
This is a warning to those who don't really know what they're doing. Upgrading a ROM on a WinMo device is something that should only be done when you know what you're doing.
Hope your device can upgrade well, but please, take the time to actually read the wiki and forum before upgrading again, for your own wallets sake.
Click to expand...
Click to collapse
thanks, but I've upgraded before to other versions without a problem and I know that pulling the plug out is a bad idea.. the cat jumped up and ripped it out causing it to brick.
What all the smart arses on this site should be telling you is that you don't need activesync to run the upgrade - it will work just fine from the tri-colour screen.
First off, when you get your phone into the tri-colour screen, check the SPL version - if it isn't 2.10 olipro, the first thing you need to do is read the vanx guide's (link in my sig) and get hard SPL 2.10 olipro on there ASAP - this will prevent you from bricking your phone.
If it is already 2.10 olipro, then breathe a sigh of relief as everthing is OK - just put it into the tri-colour screen and run the upgrade again - it should start again with out a problem.
Cheers,
Smiffy.
I have posted this in another thread but noone seems to be able to help or have seen this message.
But I hope some of you can give me some kind of help so I can rescue my Touch Diamond.
I really need your help so I cand send my phone to repair on my warranty.
My Diamond is "almost" dead and when it´s connected to the batterycharger, the phone reboots allt the time, but I can access the Bootloader, and it´s the ONLY way I can have contact with my phone.
Power on won´t start my phone and with the batterycharger the text " Touch Diamond" shows upp and then reboots again and again.
But I can enter the Bootloader.
(The last cooked Rom was a beta from udk which worked satisfied. Downloaded and installed on my Diamond in November.)
I have succeded (?) to update the ROM with the official 1.93 Swedish ROM, made by HTC for the Swedish operator 3 via BOOTLOADER beause it seems to install to 100%.
I have no way to check it...had to belive that the 100% indicator was right.
Then I entered the Bootloader (only way for me to get some access to the phone) and tried to install the stock 1.93 spl found in post 20 in this thread:
http://forum.xda-developers.com/showthread.php?t=400411.
Same there: 100% is shown after install, so I thought it should work.
After install, I enter the Bootloader (tricolor) again but the text still says:
Security Unlocked
Diam100 MFG 64M
SPL-1.40 OliNex
MicroP.Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have also tried to install 1.35 spl in that post with no luck!
Do you know why it won´t show the stock spl I tried to install but shows only the hard.spl 1.40 after I tried to change the spl??
Is there another stock SPL I shall install?
I have Sim unlocked my Diamond couples of month ago with the Diamond Unlocker program.
Is my phone a brick now or can I do something so I can use my warranty?
Hope someone can help me!
Thank you very much!
Anyone?
Leave it on charger for an hour and reboot without charger...
Seems to me your battery is knocked down drained I have this too, it just will not start up.
It will start up with charger, but during startup the power is not enough to keep it going, i believe while booting, the chargeprocess is hold for a few seconds. The still empty battery just knocks down phone and -> reboot.
Method of install SPL is diff, then rom/radio.
Riel said:
Leave it on charger for an hour and reboot without charger...
Seems to me your battery is knocked down drained I have this too, it just will not start up.
It will start up with charger, but during startup the power is not enough to keep it going, i believe while booting, the chargeprocess is hold for a few seconds. The still empty battery just knocks down phone and -> reboot.
Click to expand...
Click to collapse
I just tried this and it did´nt help.
When connected to the battery charger, the phone indicates it charge for a couple of seconds, then the start/reboot thing occur again.
But the ring around the D-pad did´nt glow anymore like it does when the phone being charge.
However: I let the phone be connected to the battery charger for 5 hours, then tried to start the phone, but the phone did not react when it had no power source.
But when I have the phone connected to the charger, the phone ony starts with "Touch Diamond" on the screen and then reboots.
During the restarts I can access the bootloader.
I also tried a new and fresh battery from my friends Diamond but same problem occured. The phone wont start.
mondilv said:
Method of install SPL is diff, then rom/radio.
Click to expand...
Click to collapse
I tried to change back to stock SPL - after I had installed stock Rom -by entering the bootloader (the only way I can access my phone) and started the update for SPL. The indicator showed it was updated to 100%.
But when I look at the tricolor screen it still shows I have Olinex 1.40.
Have I made something wrong when I tried to install stock SPL? The installation indicator during the install looked normal.
Can I have problem to install the stock SPL mentioned in post 1, because I have not a WWW- Rom? I had to reinstall the original ROM for the Swedish operator 3.
Really hope someone can help me out so I don´t need to trash my phone into the garbage.
hi,
i've flashed my HTC P3300 and it was done successfully (using USPL) but the language was Spanish, i searched a lot how to change it to english since i dont understand a word of it.
through one of the forums, i was told to set the SysLang = 1032 in registry to get the english language, i done so, now, the phone is stuck in Welcome (WM6.1) screen and nothing is happening, not even responding to power key.
I tried hard reset, it doesn't work, i tried entering to bootloader, it also doesn't work.
Also, i am not able to connect it to PC since i guess its not completed up.
Just got stuck with a brick, can you help please. Really needed!!!!!!
FYI, on booting following is displayed (might help)
IPL 3.13.0001
SPL 1.11.0000
GSM 02.94.90
OS 4.1.0.7
Thanks
i have the same problem...
can anyone help???
please...
i realy need it....
Friends Please Help Me My Diamond Going Black after Run "Diamond Unlocker.exe"
Please Help Me i dont know what to do anymore right now please please help me
Please help me what should i do now... hiks
jayzx said:
Please help me what should i do now... hiks
Click to expand...
Click to collapse
hopeless... people please read carefully before your do hard spl dont like me... hiks.... bye bye my diamond
You really need to provide more information if you are asking for help.
For a start.
Which Type of Diamond GSM or CDMA.
What steps you took to get into that situation, what have you tried to resolve it.
Have you hard reset you device.
Can you access boot loader?
And most important - please have some patiences.
Sorry no detail cause i'm shock to see my diamond no response anymore....
This the detail :
1. Diamond GSM... want flash radio 1.12.xx but cannot... then
2. Run diamond_unlocker.exe (later found that's for CDMA Diamond.. really stupid... hiks)
3. Googling n people said no hope must change main board ....
4. Found the price of main board almost same with the new one ...
Really unluck day....
Goodbye My Diamond... put in recycle... hiks
why don't you send it for guarantee repair? At this stage, all diamonds are still in guarantee period..
And there's big chance they will fix it on guarantee. You have nothing to lose...
jayzx said:
Sorry no detail cause i'm shock to see my diamond no response anymore....
Click to expand...
Click to collapse
So - just a pointless post to let of some steam, then.
sympathy's at your loss
Same happens to me flash with this file and my diamond dead, i bought to HTC service center and they have to replace the main board (for free) now my diamond is good
Thanks people for the suggest.... today i'll bring it to HTC Service Centre hopefully there any 2nd motherboard ... cause the new one so expensive
Read and find data more carefully to do "Security Unlocker" or "Hard SPL" to your Diamond not like me...
Hello,
is he really dead, or is he hanging on the startup screen (Black screen with white "Touch Diamond" on it)
I had a similar problem, and because it didn't startup I could not flash another rom.
Here is what I did to solve it:
Push the power button, the volume down button and the left arrow button all at the same time, then push the reset button with your stylus tip (I know it sounds impossible, but you can do it) Keep the buttons pressed (except the reset, that one you just push once)
then the phone is in serial mode and you should see a rainbow screen
You will be able to sync with your pc now, just put in the usb cable and flash a new rom (for example the standard htc rom)
hope this helps
grtz
Hi i am new in this forum but really old on the bussines, well the problem with my phone is that seems to be bricked, sometimes turn on hangs on operator logo and put black screen sometimes can get on boot mode some not, its an strange problem, already tried to flash with micro SD but no luck, i get the phone is this state to repair.
This is what i get when i put phone on boot mode:
IPL: 1.12.0001
SPL:1.12.0000
The phone is from the operator TIM Italy i will really appreciate if u help me to solve this insue.
Br,
Tito Millo
Standard ROM or Cooked One? Have you Used USPL before flashing?
D'rath
PS: I buyed a TIM Artemis for my girlfriend, I changed the ROM and no problems
Standar ROM yes i have tried to use USPL but no luck cuz phone doesnt turn on at all and i cant sync with active sync
Br,
Tito Milo