Tried to change language in my IPAQ from ITA to ENG, tapped on bootloader.exe and i'm stuck on it. I have tried mtty r2sd, sd2r - the sd-card was not empty, so I've ****ed up my IPAQ. I have tried with original firmware from HP, modified the registry but it closes connection before beginning updating the software.
Help!!!!!!!!!!
hehe... )
same as I did some time ago... )))
The solution is here:
http://www.pocketpcmag.com/forum/topic.asp?TOPIC_ID=7020&whichpage=1
good luck
buzz
I have read that, but I cannot flash it
I have read that post from pocketpcmag, but I cannot flash it, cause it disconects when I'm trying to do it. Anything else?
I managed to repair it
Now I have english on it
Re: I managed to repair it
sw0rdfish said:
Now I have english on it
Click to expand...
Click to collapse
how?
did the registry trick help you?
buzz
Forgive me for my inherent stupidity. My Qtek 9000 device fails to boot up and stays stuck at the splash screen. It shows me the Radio, CE image versions, but it does not boot. I even tried the upgrade procedures suggested to the Qtek ROM. My only guess at this time is I have corrupted my bootloader. Where can i get a bootloader .bin file so that I can use mtty and try putting my bootloader back on. Any help in this matter is highly appreciated. I just don;t want a $1000 Qtek paperweight on my hands.
Very Strange coincidence. My Qtek 9000 has the same problem
Just before reading your post I tried to hard reset my Qtek 9000 to reinstall my preferred software after some experimentation.
Now my device will not get beyond the 'spash screen'.
I have no idea what to do?
The device will power up and illuminate the screen with the Rom Details then after 15 seconds just powers off.
Somebody help please!!!
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
Hi there,
I was running vanilla 3.01 fine!
But this evening my phone was turned off and it did nothing... no light not on the charger and my computer doesn't connect.
I've read a few threads which explained how i could fix this.
So after a hard reset my device only shows the 1st screen with the following information:
IPL 3.04.0001
SPL 1.11.0000
Then nothing.. it sticks to this screen.
Would any of you genuisses help me find a solution?
I would really appreciate! thanx! :-(
found the solution!!!! pffeww
Enter bootloader
Flash original ROM
cid-unlock
update ROM to Vanilla's 3.01
HAPPY!!!!
ps.. THANKS to Aje_fr!!!! (who already posted the solution!)
just in case you don't know how to enter bootloader;
hold down the note and power button and soft reset.
Veel plezier!
now really dead...
I was installing all my software but when I soft reset it was dead....AGAIN!!..
I entered bootloader again and repeated my previous steps.. but now my device goes to sleep instantly.
it doesn't do anything...
Send it to T-mobile I guess... (Glad I was able to flash the WM6 T-mobile [NL] version)
Anyone got an idea whit it could be?
mtomassen said:
I was installing all my software but when I soft reset it was dead....AGAIN!!..
I entered bootloader again and repeated my previous steps.. but now my device goes to sleep instantly.
it doesn't do anything...
Send it to T-mobile I guess... (Glad I was able to flash the WM6 T-mobile [NL] version)
Anyone got an idea whit it could be?
Click to expand...
Click to collapse
It could just be the backlight switching off. Ive read about this in a few threads. Ive experienced it myself with Meschles 3.01 ROM.
nm8 said:
It could just be the backlight switching off. Ive read about this in a few threads. Ive experienced it myself with Meschles 3.01 ROM.
Click to expand...
Click to collapse
Nope, even with te original T-mobile rom it dies after a few minutes...
Thanks for the tip though!
Hello, Please Help
I,m an E-pat living in spain and got a new HTC Touch through my servise provider (Movistar), Of course it came with Spanish Windows Mobile, and I needed it in English, so I decided to flash it with an English-language ROM
Touch_Dual_WWE_2.01_2.20.707.1B_03.07.90 after i had sim and cid unlocked it first
Unfortunately I was not aware until it was too late that there are multiple different Touch models, and I obviously flashed an incompatible ROM . At first everything looked good, then I noticed that the phone rebooted every three minutes, and finally, having been switched off, it no longer will switch on. The orange led comes on for a few seconds, then disappears; a soft or hard reset produces the Movistar logo screen, then it switches off again.
I can put it into the bootloader tricolor screen by holding the camera button for a while; and i get the USB words appering in the bottom left of the screen, but i cannot activate activesycn to try and load a correct Rom. I have tried to load 3 elf Rom,s through the RUU without success.
Is there some way i can flash a WWE Rom or have i bricked my new phone ?
This is the origonal Rom
Rom version 2.20.621.1.esp
Radio 03.07.90
protocol 4.1.13.51
Ext 2.20.621.101
Devise 010050
Htc 304
Thanks Zomac
have you tried looking for the answer here
http://forum.xda-developers.com/forumdisplay.php?f=374
you may have to try flashing the original spanish rom if you can find it
On an athena the phone is not bricked if you can get into the tricolor bootloader,
but to flash a lot of roms the phone must be have another SPL loaded.
if you search the forum there are usually many people who have made the same mistake as you previously.
You can also use the search button to get your answer quicker , but there is a sticky that talks about a possible solution near the top of the quoted page