I have been sync'ing with Windows Mobile Device Center and Vista Business edition sucessfully for a while.
Today I tried to update to WMDC 6.1 and i received some "Unidentified device" messages and now I can't get a partnership between my laptop and my O2 Orbit. I have tried uninstalling WMDC and reinstalling both 6.0 and 6.1 but cannot get my laptop to do anything when I reconnect my Orbit.
Does anyone have any ideas??
Thanks.
I had exactly the same problem - and simply by inserting and removing the USB cable multiple times and rebooting the machie twice it righted itself.....I know it doesn't sound very scientific but it worked!
Yeah, I've tried that multiple times ( and yet again but no luck!!)
Just wondered if anyone else can give a more 'scientific' solution.
Thx.
I had the same
I had the same problem and it did my head in for ages...
Worked fine connecting on original WMDC, but then updgared to 6.1 and it stopped...
tried downgrading, still no joy.
then the solution... on your xda, go to settings, connections, usb to pc, and turn off advanced settings. then try it...
TangerineTractor said:
I had the same problem and it did my head in for ages...
Worked fine connecting on original WMDC, but then updgared to 6.1 and it stopped...
tried downgrading, still no joy.
then the solution... on your xda, go to settings, connections, usb to pc, and turn off advanced settings. then try it...
Click to expand...
Click to collapse
Finally, IT WORKS!
Thank You!
Ok ive tryed it all nothing works ive unchecked the "usb to pc" in the settings.
Ive reinstalled WMDC 3 times and even pluged my phone in to a xp computer with activesync still nothing. Even when i put my phone in to bootloader mode still will work pls help
Any one? pls help
Hello, I just upgraded my phone to winmo 6.1 but now, i cannot connect to activesync 4.5 anymore in my xp laptop..when i plugged my phone to my laptop, it said not recognized usb device..i've tried to follow the instruction from the sticky to unchecked the first option in usb to pc but no luck
anybody can help me please? thanks
Hi everybody,
i updated my diamond af few weeks ago, everything worked but now i can't connect with usb anymore, tried activsync and diskdrive on windows xp 32 bit sp3, windows 7 32bit and vista ultimate x64 but nothing works.. ant ideas and or solutions? tried hard reset already..
Same happened to me. USB cable only works for charging now, it's not recognized for syncing. Tried different pc's so know it's not that.
Must be a problem with the Diamond hardware or the USB cable I think.
jmh7 said:
Same happened to me. USB cable only works for charging now, it's not recognized for syncing. Tried different pc's so know it's not that.
Must be a problem with the Diamond hardware or the USB cable I think.
Click to expand...
Click to collapse
It seems more likely to be a "software problem" rather than a hardware one. Please try to "hard reset" it (you will lose all data, and restore to factory default). Then do syncing again. If it works, it means something you have installed crash with the syncing.
Or try firstly different cable (for ex. from Canon IXUS cameras! )
oliviereijpe said:
Hi everybody,
i updated my diamond af few weeks ago, everything worked but now i can't connect with usb anymore, tried activsync and diskdrive on windows xp 32 bit sp3, windows 7 32bit and vista ultimate x64 but nothing works.. ant ideas and or solutions? tried hard reset already..
Click to expand...
Click to collapse
1. Ok, try the obvious:
- Go into "USB to PC" applet (start/settings/connections/USBtoPC).
- Make sure that the 2 checkboxes are checked ("Enable Advance network functionality", and "Ask about connection type when I connect").
- Disable your antivirus & FIREWALL (My Norton AV/Firewall doesn't allow ActiveSync and messes with USB drive mode!).
- Now connect to yor PC's USB and see if it works.
2. Check the following key in your registry:
- \HKLM\System\StorageManager\FATFS
- Make sure the "CacheSize" value is ZERO "0". EnableCache can be enabled or disabled, didn't make a difference for me.
I had the same problem and fixed it following exactly these 2 steps. Fortunately, I remembered to re-trace my steps backwords
Good luck & Cheers
Dear Sirs;
Maybe this part of forum not be the proper place for my question but I don't know the poeple more expert than XDA masters.
Since last monday, computer cant recognize my Diamond when I connect it by USB cable and "USB device not recognized" appears. I will be really appreciated if you kindly help me.
Best Regards
Dariush Chegini
Try reinstalling Active Sync/Windows Mobile Device Center.
First remove Active Sync/ WMDC, restart PC and than install Active Sync/ WMDC.
Thanks for your kind attention. I reinstalled Activesync...no change, computer can't recognize the Diamond. My Diamond charges with both charger and computer, USB headphone works but PC can't recognize it....
I'm so confused and will be really appreciated if XDA masters help me.
Best Regards
XP or Vista or Windows 7 or which OS?
I've tried by both WIN XP and Vista.
could be a few possibilities for XP atleast...
activesync - file->connection settings->allow usb connections checked
faulty cable, try another one
faulty port on computer, try another one
driver issue - a difficult one...
i had this on my xp, found out there's something wrong with the cable - phone charging fine via computer USB, but XP says it doesn't recognize the device so doesn't connect to activesync....
good luck
Try on your Diamond -
Start>Settings>USB to PC
Unchek "Enable faster data synchronization"
If none of the above solutions work, maybe a hard reset...
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
dchegini said:
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
Click to expand...
Click to collapse
Try this in order...
1. Connect diamond to pc - it should at least charge as your say, but not detect Activsync
2. Goto Settings > Connections > USB to PC
3. Check Allow USB Connections > Uncheck allow fast data sync...
Does it connect?
if not and if you are using Vista
1. goto Windows Mobile device Center
2. check the attached image to see you have the same settings...
Does it connect?
if still not, then it could be driver issues, which I can suggest, once you reply to the above...
Thanx for your attentions. I've tried uncheking the said bottom but no change.
I used to connect the Diamond to the same notebook without any problem for more than 16 months, but the damn notebook stop recognizing my Diamond these days .
Thanks Millions
Dariush
may be usb port on your computer is malfunction. Did u try different usb port?
You need to open device manager in control panel to see how you diamond is listed.
Ever since i started with a new company 3 years ago they have some software that prevents activesync from connecting to any device I have from their computers using USB.
I went Bluetooth method and all is fine. I just use the USB for large, direct file transfer to internal storage.
If you get issues with activesync and usb and can take ages to resolve (if possible).
I guy's.
After a lot of search in this forum and a lot of other forum's, i came to this threat.
I had the same problem, my diamond didn't connect to my pc.
I had tried all the different suggestion, and nothing seemed to work. until i read the post of cloudedhopes, that suggested to change the usb cable. Because it was the only thing that i hadn't tried, i did change the cable, and it worked!
So i'm posting only to thank you guy's for all of the help, given not directly to me, but to all user!