Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
kame1986 said:
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
Click to expand...
Click to collapse
Try searching with a google advanced search - limiting your results to http://forum.xda-developers.com
Try say "BBconnect Trinity" or "Blackberry Trinity".
It's there I promise.
If its there plz point me in the rite direction. wud appreciated muchly !
will also search though.
For KAME1986
Hello,
I have just finish to upload the .cab on rapidshare.
http://rapidshare.com/files/50855639/bbconnect_wm6_pro_4.0.0.90.cab.html
Enjoy.
Private69.
@++++
could you upload not in Rapid pls..
thx
Finally i have a steady WM6 version with works with BBConnect !!
Thx
try this...working on my trin
try the steps here to get bbconnect working.
http://www.sems.org/entry.asp?ENTRY_ID=276
Graytraveler, try .84, 90 did not work for me with a stock Tytn II, but 84 did. Or I used Dutty's latest ROM from Xda-developers.com and .92 worked fine with that.
Hchickers, you can try this:
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, such as Resco (www.resco-net.com) or Total Commander (www.ghisler.com, I use 2.5 beta 3). Then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Then soft reset and install Blackberry Connect. This method worked for some people (they weren't using 750, but still). It might work for you as well.
Click to expand...
Click to collapse
even if this isn't any help for people getting started with BBC on there trins, all new BBC updates get posted there.
p.s. If u dont have bb service from your network before!!, then bbc will never work.
hey dutch people t-mobile comes with this update
http://member.htc.com/ruudownload/t-mobile/TMobileWM6Step1-TMNL.aspx
check this link for the update greets
do you have to use a tmobile branded device ?
or is a mirror available
Dane_sober said:
do you have to use a tmobile branded device ?
or is a mirror available
Click to expand...
Click to collapse
No mirror yet. So it's only for those people with a branded device.
Lemontea said:
hey dutch people t-mobile comes with this update
http://member.htc.com/ruudownload/t-mobile/TMobileWM6Step1-TMNL.aspx
check this link for the update greets
Click to expand...
Click to collapse
He guys this one unbricked my T-Mobile MDA Compact 3 NL (i had to do it with 2 mda's one working with active sync to start de update en get phone info, after that you pressed next next blabla, atm that you phones restart you need to unplug the phone en replug it into the bricked phone start it up on the bootloaderscreen (left hwbutton) and it starts to update!
thanks for this one, you make me verry happy today!!!
Ahh nice, is there somewhere a whitepaper with info about this ROM?
What it contains and what not?
hey ik zal eens kijken one moment please
Eximius said:
Ahh nice, is there somewhere a whitepaper with info about this ROM?
What it contains and what not?
Click to expand...
Click to collapse
i think this one but im not fo sure http://promoties.t-mobile.nl/softwareupdates/ then click on mda products etc..
nice find, gonna test it in a few secs, still curious how thisone will run
I've installed this ROM succesfully on my MDA Compact III
But now I'm looking for the HTC Home plugin, Cube and Touch Flo that works with this official T-mobile WM6 Dutch ROM
I don't want to flash an entire new dutch WM6 ROM, I just want to have a proper HTC Home plugin.
I tried to install an english version of the plugin but that leaves the plugin as empty space.
Where can I find it?
Didn't try the ROM yet, but here are two mirrors:
Rapidshare
Megaupload
dankjewel kerel
MrMagic said:
Didn't try the ROM yet, but here are two mirrors:
Rapidshare
Megaupload
Click to expand...
Click to collapse
I installed the new WM6 from T-Mobile but in the bottom of the screen there are some quicklinks to several programs but I don't want that.
Is there any way in removing this?
In registry remove the following:
Go to the keyname HKEY_LOCAL_MACHINE\init find and Launch92 and edit the value from TryAp.exe to _TryApp.exe
j3roen said:
I installed the new WM6 from T-Mobile but in the bottom of the screen there are some quicklinks to several programs but I don't want that.
Is there any way in removing this?
Click to expand...
Click to collapse
Ugly pink and white comm manager
Eventhough i softreset before the t-mobile customisations the comm manager has ugly pink buttons now. Is there a way to regain the original comm manager>
What apps
Can someone tell me what apps are in this ROM please?
Is live messenger in it?
What radio version, how much storage en memory are available after flashing this ROM.
mauce said:
I've installed this ROM succesfully on my MDA Compact III
But now I'm looking for the HTC Home plugin, Cube and Touch Flo that works with this official T-mobile WM6 Dutch ROM
I don't want to flash an entire new dutch WM6 ROM, I just want to have a proper HTC Home plugin.
I tried to install an english version of the plugin but that leaves the plugin as empty space.
Where can I find it?
Click to expand...
Click to collapse
A simple google search for 'htc home plugin' brought me here. I don't know if it works on the dutch version; maybe you'd have to change the settings. I think B&B roms have a program for that, or else the dutch touch rom.
double posting
jeroeng33 said:
Eventhough i softreset before the t-mobile customisations the comm manager has ugly pink buttons now. Is there a way to regain the original comm manager>
Click to expand...
Click to collapse
Hi, i had the same problem, the ugly pink commManager.
I tried to change the it to the standard htc commManager, but that give a error.
But now it's working.
Use the uspl program,after the reboot install the standard htc commManager.cab and it will work.
anyone having problems with this rom?
i installed the one i downloaded from t-mobile.nl software downloads.
and now all the phone is giving all the sounds through the large speaker instead of the normal one where you have to hold you phone to your ear.
tried flashing back to the touch 3.01, but still all the sounds come from the wrong place, like speakers is always turned on during calling.
any ideas?
To install this on my Orange M650
i have tounlock the phone first ?
then can i use both a t-mobile and an orange SIMcard ?
( not simultaniously )
I installed HTC Home to my wife's P3300 (Artemis) and otherwise it's working quite OK but I still have the following problems:
1) quick dial -option is not working. I cannot enter/choose any phonenumbers to it.
2) weather forecast function is not working
3) quick launch doesn't work, except for comm. manager. If I'm trying to add programs to quick launch, the only program I'm able to add is the file explorer. And even that one doesn't work after tapping its icon...
So what to do? I've tried several different versions: v.2.0.814.722, v.2.1.1005.722 and v.1.89.... something. Every time same damn thing: those ones mentioned above won't work...
So what to do next in order to get HTC Home to work completely?
Thanks in advance!
Hi, i think htc home is region sensible.
i had the same probleme I instaled the french version and it solved the probleme.
nickytheshaft said:
Hi, i think htc home is region sensible.
i had the same probleme I instaled the french version and it solved the probleme.
Click to expand...
Click to collapse
Yeah, that must be the reason why it's not working in Finnish WM6 (country code tweaked to English since it's installed to English language phone).
OK, is there a way to tweak the country code of HTC Home in order to get it work in almost every WM6 version? I'd like to know that...
I have the Softbank Hermes X01HT. I have upgraded to WM 6 from WM5. After upgrade my contact wont appear when I press contact on the right bottow corner ( after I restore from SPB back up).
Could you all please let me know how solve this?
Thanks.
D
dickyw said:
I have the Softbank Hermes X01HT. I have upgraded to WM 6 from WM5. After upgrade my contact wont appear when I press contact on the right bottow corner ( after I restore from SPB back up).
Could you all please let me know how solve this?
Thanks.
D
Click to expand...
Click to collapse
I do not have that device, but you may have to go into your SIM Manager in your programs if you have one and copy them over to the device
unfortunately it wont help but thks anyway.
Any suggestion guys?
dickyw said:
unfortunately it wont help but thks anyway.
Any suggestion guys?
Click to expand...
Click to collapse
did you sychronize your device before the upgrade? if yes, then synchronize it again and you're done... if not, well then maybe you are saving your contacts on one of msn accounts and you still can synchronize and get your conatcts back...
I only have these 2 solutions for now.
As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun
Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip
thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend
does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos
Thx mate
Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude
casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos