Related
Can anyone verify if WM6 on the Trinity brings back the Bluetooth DUN profile?
I'm 95% happy with the Dopod WM5 ROM on my P3600, the only thing missing is that I can't get traffic updates to my tomtom 910.
Hi, I am using mun's 2SE rom and I can now get traffic updates on my tomtom 910.
I did not have to do anything special on the SE version, it just worked.
WM5 etc would not see anything other than the BTHF profile.
all workign now
BMF
Very VERY good news, off to go download WM6 now
I just downloaded and installed mun's 2SE (flawless install). Wow is my phone better
Anyway, it does enable TomTom 910's traffic updating. I had to "delete" my phone from the TomTom 910 and then reconnect to it.
Simple.
Is there any possibility this Bluetooth patch can be worked into the WM6 releases for the Hermes??
I have exactly the same problem (no DUN profile), but on the Hermes.
DOH!
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
badmelonfarmer said:
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
Click to expand...
Click to collapse
I found solution) here it is http://forum.xda-developers.com/showpost.php?p=1281328&postcount=882
My Tom Tom GO 700 reports this error during the configuration.
"This phone does not report Wireless data connection (DUN) cabalities."
I have loaded mentioned CAB's.(SP1 and BT_DUN) Is ther a hope on getting this going?
thanks Peter
After adding new cabs, delete phone from TomTom, delete TomTom relationship from phone. Resync.
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
psimek said:
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
Click to expand...
Click to collapse
try to add this reg entries and files... sorry don't have time to make a cab
Thanks MuM,
Phone is recognized, but cannot connect to cingular.
I will try to play with more settings before I go back.
Peter
Where to Install MODEMLINK?
Where should the contents of MODEMLINK be install? Windows dir?
Thanks
mun_rus said:
try to add this reg entries and files... sorry don't have time to make a cab
Click to expand...
Click to collapse
Please kindly advise where I should put those reg entries & files? TKS & RGDS!
dan.gior said:
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Click to expand...
Click to collapse
to connect over usb you need usb rdiver HTC for pc...
here:
to connect over usb you need usb rdiver HTC for pc...
here:
So I'm a bit confused, does that mean we can use a data connection on the Hermes via Bluetooth for the TomTom 910?
I recommend you this thread, that's the way I got tomtom go data connection and plus services working with my wm 6-updated wizard:
http://forum.xda-developers.com/showthread.php?t=314371&page=3#21
dartrax
ervius said:
to connect over usb you need usb rdiver HTC for pc...
here:
Click to expand...
Click to collapse
Thanks worked painlessly on my O2 Orbit (Artemis/3300).
What a great site - I've learnt loads already and lookforward to overclocking next!
Neil
connected my new smartphone shadows with tom tom go 700
After 5 days of struggle, I finally was able to connect my wireless data (DuN) with my tom tom go 700.
What i did is as follows:
extract the attachment and do the following:
1. Unlocked my phone app for tmobile
2. installed WM6_btdun
soft reset
3. copied all files of SPDUNHACK including registary one to the windows folder(\windows)
4. Installed the installed ATCUI, showed me a serial (COM:1) port
softreset
and connected my tom tom...
But as the experts mentioned earlier, while your tom tom is connected, you are not able to surf the net but able to do all other things. It says voice call active.
Good luck!
Hy Guys, I was looking at the thread in the forum, I need a WM6 ENG Rom for IPaq hx2795 that really works. I can pay by PayPal, let me know who has it or can generate it. I am really tired of WM5, it is very slow and freezes all time. Tks.
Maybe to give a try to kozhura's AKU3_52_hx2000 (WM 5.0 English) for IPAQ hx2000 series. I tried it to my hx2490b and is faster than the original. Look at this thread:
http://forum.xda-developers.com/showthread.php?t=326214&highlight=hx2000
I think works for your device, and someone allready try it.
Russian developers don't sleep....
WM6 for HP iPAQ 2*** series
Very good news!! Thanks a lot
The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.
nunesfl said:
The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.
Click to expand...
Click to collapse
LOL!!!! No comments....
Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.
nunesfl said:
Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.
Click to expand...
Click to collapse
Hi,
How is it going, please let me know once you flashed the ROM,
hi nunesfl,
every thing works fine except A2DP, Did you give a try yet ?
This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
MagLite_RUS said:
Russian developers don't sleep....
WM6 for HP iPAQ 2*** series
Click to expand...
Click to collapse
Another BUG in WM6.0:
When using TCPMP player, you can not hear any audio from wmv video. Strange?? I can play and hear the same video at WM5.0.
abbaml said:
This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
Click to expand...
Click to collapse
I have used this rom on a hx2190, and i have found it impossible to sync my calander, being unable to use any of the windows live programs and there is no remote desktop mobie. Apart from them it seems to work
Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.
nunesfl said:
Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.
Click to expand...
Click to collapse
OK,
I am having the same hx2795 and I found the following
a) Active Sync is working, When I tried at first time it didn't work. After I did a hard reset then I enabled "Advanced networking" from the "USB" settings menu then it worked
b) Sync over Exchange server working fine
c) WiFi is working, I checked with WEP security
d) Bluetooth is working but A2DP is not working When I tried "High Quality Audio Profile" it says authentication failed, I never see it is asking me for the pass key, so I guess that may be the problem
e) TCPMP works fine for FLASH and AVI movies, WMV does not work because WM6 uses a higher version of codecs, so you have to use WMP or you need to replace the WM5 codecs, search through over the forum you will find a solution
f) Finger print authentication works great.
g) Windows Live and messenger is not working, it says there is no connectivity and I don't know what is the deal. But IM+ is working just fine
h) You can install Finster-WM6_RDP.cab as a Termial Service client, it is very good than the inbuilt RDP client in the original HP ROM and it allows you to connect services that use custom ports
i) ROM seems to be stable and I don't have any problem with other functionalities atleast untill now
HX2790B
hi i have a hx 2790b ipaq and is wondering if there is a WM6 Rom update for it reading this thread it seems there is for the 2000 series, but i cant find the link for wm6 for the 2000 series ipaq's any infomation is appreciated
many thanks
Ben
It works for my hx2490b. The link is here:
rapidshare.com/files/53282580/WM06.rar.html
will this work with transflash / transflash hc cards, and currently my hx2790b will not read a 512 transflash card with sd adaptor, and thats not transflash hc, as i have a 4gb transflash in my N95 and that can read it lol
Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?
we need some detailed instructions for wm6 on a HX2790b as i have tried all sorts and all i get is incorrect device sku,
please help
am desprate
nunesfl said:
Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?
Click to expand...
Click to collapse
Hi,
even I don't see the contrast and error reporting menu, so I guess it might be work for some other hx2000 series and not for hx2795, or it may be some registry hack, I don't know
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install
I have WM6 and Ibought it on the US
dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.
COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).
dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?
Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?
dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Does anyone upgrade HP 614 to WM6.1?
Thanks!
any updates?
It's rom upgrade.
Thanks to Yevg001 from www.israpda.com
http://rapidshare.com/files/127265775/614c_WM61_19214.rar
pass:israpda.com
Sorry for my broken english.
This is link to post but on russian http://forum.israpda.com/viewtopic.php?p=60290#p60290 and for download you need regestred on forum.
So i think lin to dowmload it's ok!
UnRAR file to SDcard but not SDHC (not work) turn off device.
Push to record + mute buttons both and keep pushed. Push to power button and dismiss.
After you see SDLoder on display put device on table and wait for resume process.
After upgrade wait for windows logo and start yor's device.
Many thanks, I was searching for this for so long!!!
Just a couple of questions
1.It's on english?
2.It's works?
Do you know how to backup the original ROM before update?
thanks
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
It works really very well.
Big thanks to Yevg001!!!
Keep up the fantastic work!
If there are any news, please let us know immediately!
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Not work the link.
Please put another link.
muntean.calin said:
Not work the link.
Please put another link.
Click to expand...
Click to collapse
Link from rapishare is working, already downloading , I'll install tomorrow and make a report ASAP.
igorslon said:
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Click to expand...
Click to collapse
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Atlus said:
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Click to expand...
Click to collapse
Did you try to activate "receive all incoming beam" under connection settings?
Thanks for report, it doesn't look like a stead version.
bigu1975 said:
Did you try to activate "receive all incoming beam" under connection settings?
Click to expand...
Click to collapse
Many thanks, that was the problem, I think Incoming Beans referred to IR, as per my other device.
It now works great!!!
I recommend the update. :
-More stable
-faster than WM6.0
-SMS threaded
igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
Hi Igor,
I have a 614c since end of March and 3 more around me (of friends) all running on Cellcom SIM. It seems that the ROM does not have Cellcom as a listed service provider.
Since work with HP on a new ROM and have a beta ROM installed on my unit HP asked a few time is there a STD (Sleep Till Death) problem in an Orange SIM, bacause many customers compain about this besides the BT volume and AGC problem. Can you say some thing. Further more, what Hebew are you using on 6 and 6.1.
Thanks
Nir
Hello everyone,
Hi I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
analyzer.x said:
Hello everyone,
I just purchased the HP iPAQ 612c from Australia, This is my first PDA. So I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
Click to expand...
Click to collapse
Origimal ROM http://forum.xda-developers.com/report.php?p=2374906
And this a new ROM upgrade from Yevg001 www.israpda.com
http://rapidshare.com/files/131025566/WM6.1_19965_19965.rar.html
pass:israpda.com
Hi igorslon,
Thanks for reply.
However, hmm I am not sure how that answers any of my questions, I already have the files from these links, I am just not sure how to use them.
Again how do I begin to create a flash.dio for example?
I came across XDAtools
http://wiki.xda-developers.com/index.php?pagename=CompleteTools
but I am not sure how I can use it to back up my rom to a file.
any practical help please would be much appreciated. Thanks
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
ZiCoN said:
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
Click to expand...
Click to collapse
No are the same
Thanks for the quick respons
HI,
guys i am new with my i-mate jasjam(herm 100).. and i had a problem with my sms service. i was not able to send sms with any sim card. so i installed some titanium edition wm 6.5 rom(previously i had wm5). and when i sync it with my pc i found that it was a trial version and it expired now giving me a white screen written
"this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our costumers.
to obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release."
now i am not able to access any thing on my i-mate. even active sync is not able to synchronize with the pc.
i only want install a good windows(rom) in it. so can any body help me with this problem of mines in easy way.like giving me a direct link to official rom and instructions to install it,,,
thanx a lot!!!
found the solution but still need help
i got the solution for expired version from another xda thread. hard reset did the job.
but i still need a official rom.wm 6 or latest.if dont than atleast please give me some link for wm5 official rom. i dont want to play with roms just give me a rom with which i can use my i-mate jasjam peacefully and also i can send sms to my friends... please help me thank you!!
AT&T
Here, Official wm6 AT&T
Here for Official HTC WM6 Rom all links
1 more question
THANX A LOT IRFAN. I GOT THE ROM EN IM DOWNLOADING IT NOW...
just tell me few things more, what is AT&T.
and what does radio ver means??
still having the same problem!!!
guys ive tried installing a new rom (i;e wm6)en it is working perfectly fine.
but my sms problem is still not solved. i can receive sms but cant send it.
any body knows what should i do????
plse help me!!!
umair muddassir said:
guys ive tried installing a new rom (i;e wm6)en it is working perfectly fine.
but my sms problem is still not solved. i can receive sms but cant send it.
any body knows what should i do????
plse help me!!!
Click to expand...
Click to collapse
Use this. It's a cab file so just install it, then run the program. Use your current network.
What happens sometimes is the proper settings are not set up, so you end up with your situation.
need that apllication for wm6
thanxxx for the rply,
i tried that software but it is not displayed any where, while installing it gave an caution that it was designed for previous windows.
so i got the name of it (i;e htc your application name). ill search for it on net for wm6.
please if get it from some where so do post the link. thanx a lot.
extra info
and just for more info i am using gsm prepay network, company name ufone!
waiting!!!!
comon guys waiting impatiently for ur replys....need help here!!!
try playing with the msg settings in schaps advanced config. check to see if the sms access number is correct.
xPreSiDenT said:
try playing with the msg settings in schaps advanced config. check to see if the sms access number is correct.
Click to expand...
Click to collapse
what is schaps advanced config???
en sms access number is correct ive seen it!!!