Related
I need to downgrade my rom for warrany purposes (the OK key is stuck) But when I load up my Original ROM when my unt goes to the bootloader tingy, it disconnects from activesync and just well.. does noting.
Please help, anyone?
Thnaks
Execute SSPL and then run the RUU.
EDIT: Note that Hard-SPL (which I assume you have installed) will not protect you from failure because the original ROM has its own bootloader that it will put on your device, which is a good thing in terms of warranty, but a bad thing in terms of a power outage.
Original rom
Did you manage to do it and revert back/
look at this guide http://www.mrvanx.org/hermes_guide/
Yep, the guide will help you through doing this. It takes a slightly more time consuming approach but you are almost guaranteed not to permenantly brick your device doing it this way, as the last thing to be flashed is the radio, then the SPL.
Ive read the guide when i wanted to upgrade and its very helpful. Did'nt notice there was a segment on downgrading which i believe will be helpful as well. Thanks for your patience and answering, you guys are kind, for pointing me in that direction.
HArd SPL? Uh, no I didn't install that.. should I?
Trancecoder said:
Execute SSPL and then run the RUU.
EDIT: Note that Hard-SPL (which I assume you have installed) will not protect you from failure because the original ROM has its own bootloader that it will put on your device, which is a good thing in terms of warranty, but a bad thing in terms of a power outage.
Click to expand...
Click to collapse
HArd SPL? Uh, no I didn't install that.. should I?
Sorry for asking but what is an SSPL?
It's funny!!! If you don't know (yet) what is SSPL and did not (yet) installed HardSPL, Wow did you install a WM6 cooked ROM?
dcoelho said:
It's funny!!! If you don't know (yet) what is SSPL and did not (yet) installed HardSPL, Wow did you install a WM6 cooked ROM?
Click to expand...
Click to collapse
Yes, I installed a WM VI 2.0. Anyone please tell me what is an SSPL?
@ Deadman
I would suggest you start reading here: http://forum.xda-developers.com/showthread.php?t=293651
Then go to the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and do a lot more reading before you really do something even more seriously seriously nasty to your phone.
You should have installed Olipro's Hard-SPL before any kind of rom upgrades.
There is also a complete guide on the wiki to unbricking your phone.
Got it, thanks.
Thanks
chrisjasper said:
@ Deadman
I would suggest you start reading here: http://forum.xda-developers.com/showthread.php?t=293651
Then go to the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and do a lot more reading before you really do something even more seriously seriously nasty to your phone.
You should have installed Olipro's Hard-SPL before any kind of rom upgrades.
There is also a complete guide on the wiki to unbricking your phone.[/QUOT
Click to expand...
Click to collapse
Thanks
I would like to thank those who helped me. I downgraded it using SSPL then RUU. Thanks
Hi,
I have the following question. I currently have installed HardSPLv7 (so the device shows IPL-1.04 / SPL-2.20Olipro.
How exactly do I downgrade to my old IPL-1.00 / SPL-1.06 in case I have to hand-in my device for warranty reasons? I already searched through the forum and read that it can be done using sspl somehow but I couldn't find exact instructions.
Can anybody (maybe pof) give detailed instructions on how to downgrade to original ipl/spl from a .nbh with the correct ipl/spl files. I already prepared a .nbh with a spl-1.06 and the corresponding IPL extracted from an original vendor rom and put in my rebuilt dumped rom.
I also have the problem that I don't know where to get IPL-1.00, because on the page where to original roms are listed only the SPL version is noted, but not which ipl is in which rom. Can anybody tell me where I can get an IPL-1.00 .nb file?
Thanks for any help on this. I also think that maybe it could be interesting to put this onto the wiki if I anybody can answer this.
Thanks for any help.
check you PM
It's already pretty much in the Wiki, maybe a 'downgrade' link would be prudent.
Upgrading and cooking: -> MrVanx Hermes upgrade guides -> SPL Downgrade Guide
IPL-1.00 / SPL-1.06? Is this working
Hi,
I just read through the mr vanx downgrade guide and found out that there is a downgrade package with IPL-1.00 and IPL-1.04 and a second one with IPL-1.01 and IPL-1.06.
Now, I have the problem that my device was shipped with IPL-1.00 and SPL-1.06? Apparently this is a strange combination as this is not downloadable at the mr vanx downgrade guide, so my question is. Can I simply extract the IPL-1.00 from one .nbh and SPL-1.06 from the other and recombine them using rombaker, or would a downgrade to this combination screw up my device?
Thanks for letting me know.
I'm on the same boat, I need to downgrade my JasJam to send it in.
I haven't researched at all yet, i've been pretty busy. when I get off work i'll look into it and see if I run into the problem your facing and we can atempt to solve it together.
fone_fanatic said:
I'm on the same boat, I need to downgrade my JasJam to send it in.
I haven't researched at all yet, i've been pretty busy. when I get off work i'll look into it and see if I run into the problem your facing and we can atempt to solve it together.
Click to expand...
Click to collapse
Easiest thing to do is to download your original shipped ROM and extract the NBH file (using dutty's good nbh tool) and grab the IPL or SPL that you need and substitute that for the file from MrVanx. Just be careful what you flash - if you mix up the IPL and SPL file - InstaBrick! Trust me - I know
Do as ToddJG says, download the two files which i refer to in the guide.
Extract the IPLs and SPLs from the two files, mix and match.....BUT BE CAREFULL.......DONT FLASH UNLESS YOUR PREPARED TO DO IT.
ipl 1.00 and spl 1.06 will be fine.
make a single nbh from the mix and match combination then flash with customRUU.
What if i'm trying to flash the original shipped rom.. and i do the first step in your guide, then simply flash the shipped rom, or do i still have to extract the ipl and spl? (they're already extracted just wanting to know if its redundant if i recompile it with the rom i extracted them from.)
Ok, just succesfully downgraded to IPL-1.00 and SPL-1.06. Now i'm gonna flash back to an imate shipped WM5 rom. but one problem with that... clubimate.com is only showing the extroms which are around 6mb when downloaded.. where can i get the full imate rom?
also mrvanx what do u mean by this:
As with other downgrade guides this is NOT intended as a guide for claiming the warranty of the device having flashed components which are not authorised by the manufacturer or carrier.
Click to expand...
Click to collapse
?
fone_fanatic said:
Ok, just succesfully downgraded to IPL-1.00 and SPL-1.06. Now i'm gonna flash back to an imate shipped WM5 rom. but one problem with that... clubimate.com is only showing the extroms which are around 6mb when downloaded.. where can i get the full imate rom?
also mrvanx what do u mean by this:
Click to expand...
Click to collapse
It means that if you flashed unauthroized phone parts (like unofficial WM6 roms, radio upgrades and so on you have void your warranty). Of course if you can downgrade to your old rom nobody will notice that you did that.
But you have to be very careful on downgrading if you have also upgraded your radio I thinkk, cause you can brick your device (means having "NOGSM" after downgrading), see this note from mr. vanx downgrade guide for wm5:
NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.
Click to expand...
Click to collapse
Maybe you should follow mr. vanx downgrade guide for wm5 to make sure your on the safe side.
I thought he meant that it is still noticeable if you downgrade the IPL and SPL that it would be detected during warranty repairs but thats not the case...
I emailed I-Mate and they gave me an RMA# and had me purchase the $60.00 Diagnostic package from PocketPcTechs.com(They handle imate warranties in the US). So i did that, they emailed me with a form i should fill out and include it with my device when i ship it...
Did that, they sent me an email when they recieved my device, 15min after that i recieved another email that they were working on my devic, then Early the next day i get an email saying repairs are complete and its being ready to get shipped back to me... 15min an email with a tracking number saying its shipped....
Everything worked so smoothly, warranty was accepted, hopefully everything will be good when i get the device back (which should be today) I want to get rid of this ****ty iphone so bad!
todd_jg said:
Easiest thing to do is to download your original shipped ROM and extract the NBH file (using dutty's good nbh tool) and grab the IPL or SPL that you need and substitute that for the file from MrVanx. Just be careful what you flash - if you mix up the IPL and SPL file - InstaBrick! Trust me - I know
Click to expand...
Click to collapse
MrVanx instruction working just fine, however do not put your Hermes into Bootloader Mode. I've been trying the steps with my hermes in BootLoader Mode for many many times and it does not work. Leave it on OS mode. (Today) screen before you run the CustomRUU. Hope this help
why is every one so paranoid about this....
has anyone EVER heard of a warranty being denied because of the software on it?
GldRush98 said:
why is every one so paranoid about this....
has anyone EVER heard of a warranty being denied because of the software on it?
Click to expand...
Click to collapse
Yup cingular/ att will charge you for out of warranty work if its a different rom
Please help
Guys I am having the same issue, I am exchanging my phone and need to downgrade. I followed MrVanx guide and downgraded to 1.10.olipro and now need to flash the original Cingular 8525 SPL back to the phone. The SPL that was shipped was 1.11. Where can I find the file to flash? I have been trying to find it with no luck. Could someone please help me out with this? Thank you very much!
thedude0420 said:
Guys I am having the same issue, I am exchanging my phone and need to downgrade. I followed MrVanx guide and downgraded to 1.10.olipro and now need to flash the original Cingular 8525 SPL back to the phone. The SPL that was shipped was 1.11. Where can I find the file to flash? I have been trying to find it with no luck. Could someone please help me out with this? Thank you very much!
Click to expand...
Click to collapse
Go to the wiki > hermes > original shipped wm5 roms and then decompile the rom with duttys good nbh tool. You will see an spl.nb file. Make that alone into an nbh file using duttys good nbh tool. Then flash to your hermes using the custom ruu.
Since you have successfully followed mrv's guide, you should probably know what all those things are.
todd_jg said:
Go to the wiki > hermes > original shipped wm5 roms and then decompile the rom with duttys good nbh tool. You will see an spl.nb file. Make that alone into an nbh file using duttys good nbh tool. Then flash to your hermes using the custom ruu.
Since you have successfully followed mrv's guide, you should probably know what all those things are.
Click to expand...
Click to collapse
Man thank you so much for the fast reply! Having downgraded to 1.10.olipro and downloading the original rom exe, when I ran it (accidentally) it flashed the 1.11 SPL back to the phone for me. I didn't even have to use duttys tool. THANKS AGAIN!
thedude0420 said:
Man thank you so much for the fast reply! Having downgraded to 1.10.olipro and downloading the original rom exe, when I ran it (accidentally) it flashed the 1.11 SPL back to the phone for me. I didn't even have to use duttys tool. THANKS AGAIN!
Click to expand...
Click to collapse
No problem. I thought you already had the rom you wanted, but just needed to change the spl. Guess I gave the overly complex solution!
marcelser said:
Hi,
I have the following question. I currently have installed HardSPLv7 (so the device shows IPL-1.04 / SPL-2.20Olipro.
How exactly do I downgrade to my old IPL-1.00 / SPL-1.06 in case I have to hand-in my device for warranty reasons? I already searched through the forum and read that it can be done using sspl somehow but I couldn't find exact instructions.
Can anybody (maybe pof) give detailed instructions on how to downgrade to original ipl/spl from a .nbh with the correct ipl/spl files. I already prepared a .nbh with a spl-1.06 and the corresponding IPL extracted from an original vendor rom and put in my rebuilt dumped rom.
I also have the problem that I don't know where to get IPL-1.00, because on the page where to original roms are listed only the SPL version is noted, but not which ipl is in which rom. Can anybody tell me where I can get an IPL-1.00 .nb file?
Thanks for any help on this. I also think that maybe it could be interesting to put this onto the wiki if I anybody can answer this.
Thanks for any help.
Click to expand...
Click to collapse
Hey, maybe i come to late,
I had the same "problem", I had the Screen Aligment Issue. And I really wonderd myself if o2 have problem with my "Schaps ROM Version HardSPL" BUT there was no problem, they solved my Screen Aligment Issue. Afterwards I asked, what actually is bad for warrenty. Upgrading the Bootloader is no problem. But CID (Costumer ID) unlocking will may be evil. Anyway's for myself (the SA-Issue) was a hardware issue which has nothing todo with software facts like upgrading the bootloader...
dont be worried... i guess there will be no prob...
Hi everybody, first of all I'm sorry if I ask something already discussed..
Is it possible to restore original IPL / SPL without USB port using bluetooth (to copy diamimg file) and rebooting from the phone?
I have a Diamond with Olinex 1.93 SPL installed and my USB port is not working. I can't charge batteries and I can't connect with PCs; only the headphone is working.. I need to re-apply original conditions to return my phone on warranty..
I restored the original Italian ROM 2.03 (from HTC site) putting it into the 4gb memory via bluetooth and installing it from internal memory; then I'm trying to restore the SPL putting the original HTC SPL nbh file into the memory installing it booting from internal memory. But after the process is completed and I reset, I have always the 1.93 by Olinex version on the display.
I tried with a lot of signed and unsigned versions of SPL, the process is always completed but anything change.
Could you help me and tell me what to do? Thank you for your help...
As far as I know it isn't possible, yet. But as I also wanted to change SPL the same way we flash ROM and Radio images from our Internal Storage, I PM'ed cmonex about it a few months ago.
She thinks it's possible to change SPL without USB. In the end I didn't need it anymore and I couldn't test it for her. So we left it at that. But if you contact her, maybe she can help you?
Ok I asked to cmonex.. In the last days I continue flashing images from the 4gb memory but anything changes...
Mandragore said:
As far as I know it isn't possible, yet. But as I also wanted to change SPL the same way we flash ROM and Radio images from our Internal Storage, I PM'ed cmonex about it a few months ago.
She thinks it's possible . But if you contact her, maybe she can help you?
Click to expand...
Click to collapse
cmonex isn't woman i think !?
fabiovacc said:
Ok I asked to cmonex.. In the last days I continue flashing images from the 4gb memory but anything changes...
Click to expand...
Click to collapse
I think, you have to use Jump=SPL if your spl after flashing isn't changed, use button search, and type JUMP SPL
I've been reading and I see there's uspl for devices, for upgrading a rom without the need to upgrade to hard spl,
Is there uspl for htc diamond? Is it more dangerous for use?
Im asking because everything I found is related to hspl only.
I need to keep the option for restoring everything back for warrenty reasons, but I see its not possible to flash back to stock spl from internal storage, so I'm afraid one day maybe my usb slot will stop function and I wont be able to flash it using AS.
It may sound dumb, I know, but I want to make it carefully.
Is there any risks involved in using uspl instead of hspl?
I appreciate the help.
Thanks in advance.
Edit: I did found SSPL, though only for very old versions of radio and rom, Mine is 1.93 and radio 1.00.25.05
eranyanay said:
I've been reading and I see there's uspl for devices, for upgrading a rom without the need to upgrade to hard spl,
Is there uspl for htc diamond? Is it more dangerous for use?
Im asking because everything I found is related to hspl only.
I need to keep the option for restoring everything back for warrenty reasons, but I see its not possible to flash back to stock spl from internal storage, so I'm afraid one day maybe my usb slot will stop function and I wont be able to flash it using AS.
It may sound dumb, I know, but I want to make it carefully.
Is there any risks involved in using uspl instead of hspl?
I appreciate the help.
Thanks in advance.
Edit: I did found SSPL, though only for very old versions of radio and rom, Mine is 1.93 and radio 1.00.25.05
Click to expand...
Click to collapse
Hahahaha, hi eranyanay, your worries have come true for me.. Couple of days ago, my Diamond stooped recognizing the usb port, and all the syncing and transferring have been done through bluetooth..
Now i can not revert to factory SPL, thou i have flashed a stock rom and put some of the original parts (bootloader, splashes and OS) back, just to try and make the warranty work (if they accept it )... we will see in the end
And, btw, i have been flashing and using HTCs for 3 years intensively now...
the_maker said:
Hahahaha, hi eranyanay, your worries have come true for me.. Couple of days ago, my Diamond stooped recognizing the usb port, and all the syncing and transferring have been done through bluetooth..
Now i can not revert to factory SPL, thou i have flashed a stock rom and put some of the original parts (bootloader, splashes and OS) back, just to try and make the warranty work (if they accept it )... we will see in the end
And, btw, i have been flashing and using HTCs for 3 years intensively now...
Click to expand...
Click to collapse
Oh I know!
You're one of the reasons for my question.
Its just that I couldnt find any attention to sspl around here, only to hspl.
i have a new htc from t mobile i bought it from craigslist and i was proced to hard spl by this version Rhodium-HardSPL_V2_00R3_185HSPL.zip then i have a message that mean theflashage is done then i make a update to Rhodium_AF|HTC Sense 2.5|LEO 1.43 when it finish the phone doesnt work its stoped at the white screen and stays there im too upsed help me plssss
modelid RHOD210
Ok, please come down...
Let me guide and help you...
First of all it is good that you have done Hard-SPL !
So, if you ROM went BAD and you can not do anything with your Rhodium...
There is a thing that you can do...
Please, follow those steps:
1. Take the cover of the cell phone, and search for the SOFT-RESET hole at the
RIGHT (other side from the VOLUME up/down).
2. Press the VOLUME DOWN, hold it and than SOFT-RESET.
It will take you to tree colour page for BootLoader screen.
3. Connect the device to the computer and try to Flash the ROM again
(or other ROM...).
Good Luck !!
Any help, just ask for it...
hi
Doesn't work from boot laoder too I think the is no radio flash because I can't see olinex in trial color just 5 or 6 Kobe of numr
i think the Hard SPL V2_00R3_185 file you downloaded is corrupted. i also downloaded today but couldn't extract it.
That s mean my device is brick dead
Try this: Download any GSM ROM from this forum (I like EnergyROM Leo), unzip it, and rename the .nbh to "RHODIMG.nbh" (without the quotes) if it isn't already called that. Copy that onto a MicroSD card (that is formatted to FAT32), and put that in your device. Now, go into the bootloader (power off the device, then press Power and Volume Down) then follow the instructions. Hopefully you just had a bad flash, and reflashing will solve it.
I will try but I think my phone is no radio flashed yet bcuz I can't see olinex in bootloader
correzzola said:
I will try but I think my phone is no radio flashed yet bcuz I can't see olinex in bootloader
Click to expand...
Click to collapse
Oh, if it doesn't say 0.85.OliNex, then you're still on a stock SPL, so my suggestion won't work. Try flashing the TMobile stock ROM for your device, and retry the HardSPL process (I would advise redownloading everything to ensure it's not corrupt).
So how canine flash t mObile stock rom
0.79.0000 stock SPL
i have this number in tricolor that mean my device is Relocker bcuz i m was make it by RhodiumSPLRelocker_079SPL.zip so now the phone dosnt accdpte flashage by Rhodium-HardSPL_V1_20R2_185HSPL.zip
this is a tricolor screen
RHOD210 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (LED) v4
turbo HW/TURBO SW
TP MFG DATA
504,522,816,847
808,192,195,192
201,849 calibrated
and this is my start page froozen its stay here with this nuber down left
B 80
R 3.45.25.14
P 61.27t.25.23u
D Energy ROM
correzzola said:
0.79.0000 stock SPL
i have this number in tricolor that mean my device is Relocker bcuz i m was make it by RhodiumSPLRelocker_079SPL.zip so now the phone dosnt accdpte flashage by Rhodium-HardSPL_V1_20R2_185HSPL.zip
Click to expand...
Click to collapse
have you tried reflash HardSPL_v1_20R_185HSPL yet?
It also might helps you guys...
I have managed a Full Package of Hard-Spl Oilnex that WORKS!
Download the Package here...
After download and UnRAR it, you will find anything you need for Hard-Spl and the Original Tutorial
For Flash and for Stock Restore...
Enjoy!
Calm down
First of all, posting 2 new threads and commenting in the NRG thread is called spamming, stop it. It'll be much easier for you to get the help you need by sticking with one thread (I imagine the Mod is going to do that for you). Second, blasting your email address and phone number publically is bad practice, you open yourself up for a massive email spam list and phone pranks. I suggest you go in and edit your post as soon as possible and delete that information out. Thirdly, I'm guessing English is not your native language, if it isn't I suggest typing the problem out in your own language, use a translation software (I think Google Docs has this feature), and post the translation into the forum. This will help with clarity of what's going on.
Now with all that said, my final suggestion would be to tell us exactly what you have done to the phone IN THE ORDER that you've done it, up until the point that you're at now. Also, being that you bought this phone off a craigslist (another mistake imho, I'd rather just spend the extra $$ for the warranty and piece of mind that it's from the manufacturer/carrier directly), tell us what condition the phone was in to begin with. Did it come with NRGZ ROM preloaded, or the stock ROM? Was it locking up before you decided to reflash? Did you read the Flashing Guide stickied to the top of this forum before flashing your phone? (If not, let this serve as a reminder to all other newbie's looking to flash to READ BEFORE YOUR MOD!)
We're going to try and help you, correzzola, but you need to take a breath and calm down. It's just a phone, granted a lot of money, but you're not suffering onto the point of bloodshed so it's all going to be okay.
From the look of it, you HardSPL'd, flashed a cooked ROM, then removed HardSPL. Huh... that's probably not good. Try flashing this T-Mobile US ROM (I'm assuming you have a T-Mobile US TP2) while in the bootloader, and see if that solves it (or even flashes at all). If that doesn't work, I'm honestly not 100% sure what to do next, since I've never heard of anyone doing this before.
Firstly, STOP SPAMMING THE BOARD!!! - you will only annoy people and make them less likely to help you.
Secondly, Read what Dave (the Tytn Guy) has posted and let us know what happens, any more problems post in this thread and I'll see what I can suggest.
Dave
itry this rom too but doesnt work TMOUS Stock Shipped Rom 1.20.531.4 (51986) WWE
i think this step is responsable of my probleme Stock/Shipped SPL by RhodiumSPLRelocker_079SPL.zip