Hi,
I've written an app which uses a GPRS connection to read from the internet. Now when the XDA is put into the cradle then the current active connection switches from GPRS to the internet connection that is active on my PC via ActiveSync. Now... don't know how many of you guys use All-locations traffic counter but that program goes insane when this happens. Upload and download go to 4096 MB (or something like that). it scared the hell out of me when i first noticed it the next day but it's caused when the XDA switches connection?
Any idea how to drop the GRPS connection when the ActiveSync takes over?
Other problem is that Pocket Internet Explorer doesn't start up a GPRS connection when an url is passed to it as parameter (using shellexecuteex function). so i have no idea how to detect when that application closes so i can shut down the gprs connection.
Any ideas are welcome.
Hi, is it possible to connect the BA, via WIFI (P2P connection), to a PC with a WIFI card and use the PC's internet connection tu surf the web?
I tried: I can make the BA get the signal, but when I try to connect to a website it doesn't work.
Thank you in advance.
Bye.
fabbor75
I don't think its possible to do this directly using a P2P WIFI connection, but if you can get activesync to work over a P2P WIFI connection, it might work. I know is I use activesync over a USB connection & I can surf the net all day, so I'm thinking it might be possible to use the same approach over wifi.
Thing is I don't know if its possible to use activsync over P2P wifi
Solution
The problem is that windows not chain the IP Adrress of PC and Pocket bacause Nat not work under Xp basic system.
It's possible however to install a third party software to route packet from Pc to pocket i think all NAT's program can do that!!!!
Find one and Good Luck.
With WM2003SE i've used WINROUTE
Maybe?
Hi fabbor75!
Maybe your problem isn't the connection to the PC, it's maybe the DNS-resolution. Check your TCP/IP-settings on your BA, the important thing ar the DNS-Server.
The badest thing you must do is that you have to configure all TCP/IP setting manually: IP-Address, Subnetmask, Gateway and DNS-Server.
But you have to configure EXTERNAL DNS-Server on your BA, this one you got from your internet-provider, not the PC to which your BA is connected P2P. And the Gateway is the IP-Adress of your WiFi-card which is built-in in your PC.
Maybe this helps you.
Greetings, Peter
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
I have created a new Windows Mobile application to wake up hosts in a network or over the Internet. Your networkcard and/or PC must support AMD's Wake-On-Lan (WOL), most networkcards and PC's do support this nowadays.
Features
Use Win32 Sense SDK.
Sources files available!
Stores hostname, MAC address and port number using registry.
Wakes up a host in a local area network (LAN) or in a remote area network (WAN)
Support for all screen resolutions
Requirements
A Windows Mobile 6 Smartphone or PocketPC device with access to WAN (wifi/3G/GPRS...)
Computers in your network that support Wake-On-Lan
Change log
V1.3
Uses the latest Manila's SDK V1.3 which improve speed and landscape compatibility
Correct a bug when using WIFI
Add some informations (IP of device & resolved host)
"
Hi,
anything like it exist already.
http://forum.xda-developers.com/showthread.php?t=695524
with friendly greet
starbase64
Thank you, I hadn't seen this program before... However, there are some differences as the use of the win32 SDK and the availability of sources.
I hope someone will find the sources usefull
I really need this.. and have no idea what to do. unfortunately, i can't forward a port for a broadcast address in my LinkSys WRT160N.
anyone knows how to set this up?
Set up LinkSys
Hi,
Try to setup your router without the broadcast, sometimes it works... For example, if your PC's IP is 192.168.0.10 and your extern LinkSys's IP is 80.32.3.4, try to set up your router like this :
UDP forwarding:
in port: 12345 for example (you can use any number below 65535)
out IP: 192.168.0.10
out port: 9 (or 7 depands of your hardware)
Then in my app, the host IP will be 80.32.3.4 and the port 12345...
I hope it will be OK...
which app works best?? because there is 2 of these circling around these forums.. and i'm going to use the best one... which is more user friendly? and has the least amount of router input work?? either that... or will the op be so kind and kinda hold my hand and walk me through it via PM?? i will gladly sport your appication
The other application can save the configuration of multiple computers while mine only records one...
Also, mine is not based on dotNET so is slightly faster...
@nir36:
You could also try to use a smaller subnet/range. My router won't allow to forward a port to 192.168.0.255, but I changed the subnet mask to 255.255.255.224 and so the range is from 192.168.0.1 to 192.168.0.30 with 192.168.0.31 being the broadcast address for that range and which I can forward the needed port to.
You can use a subnet calculator if you need more or different IP addresses (do a search for subnet masks on google)
@ProjektFuze:
Least router input work ?? You have to setup your router/computer the same, the program just takes the public IP address, MAC address and port and sends a packet which is the same for both.
I would say WOL everywhere is more complete but this app here is more straightforward if you need it for only one computer...
Thanks for sharing!
Hi, great App and it suits my need perfectly! Almost...
I cant get it to work over GPRS/3G, only on Wifi!
Is that how it should work or do i have wrong settings somewhere, cant find any settings!
Thanks
/Andreas
Pain123 said:
Hi, great App and it suits my need perfectly! Almost...
I cant get it to work over GPRS/3G, only on Wifi!
Is that how it should work or do i have wrong settings somewhere, cant find any settings!
Thanks
/Andreas
Click to expand...
Click to collapse
It should work with 3G... It's probably a router problem !
When using 3g, the IP you set in my app must be a public IP (not 192.168.X.X) and if you have a router, you should tell him to route the packet to your local IP...
If you don't understand (English is not my native language), tell me more about your problem.
Hi!
It is not a router problem, my HD2 cannot even connect to internet in the program, and by an app in android it works perfectly so it is not in my router or computer... Can it by some issue with my rom?
Artemis 31,5
WM 6.5 23576.5.5.0
Manila 2.5.20183025.0
Radio 2.10.50.26
/Andreas
Strange...
When you are allready connected to internet, is the button enabled ?
I have a friend which have an HD2, I will try with his device and post here tomorow... Maybe another application prevents the connection...
I've tested my app on the HD2, and no problems...
My app should show your IP when connection is found. Try to:
-unconnect from 3G and launch wakeonwan. My app will normally trying to connect using 3G. Is this step OK?
-Connect your phone and launch wakeonwan. My app will normally trying to find your IP. Is this step OK?
No, neither works! It only say "Cant connect to internet"! It´s only on Wifi it connects... :-S
Ok, I will try to change the connection process and update it...
To understand the problem, what is the real message printed ?
Can't establish connection to web...
Can't find web connections...
Can't retrieve available connections...
Can't find your IP address...
An other question: is the app searching for a connection or the message is directly printed?
Thank's
Ok, can you try this version ?
remplace the old .exe with this version in /program files/WakeOnWan/
It´s the first one, Can't establish connection to web.
And i will try out the file you posted...
Pain123 said:
It´s the first one, Can't establish connection to web.
And i will try out the file you posted...
Click to expand...
Click to collapse
OK, I'm waiting for feedback
I have Desire. Try to create VPN connection to my work net over 3g, GPRS or Wi-Fi. Tunnel creation is succesful. It's working perfect for 15-20 seconds then nothing. No any warnings in Phone. VPN Server says it's OK. But net resources and RDP connections are unavailable. I'm using IPsec/PP2P protocol. Server with Win2k.
Also try to connect to another VPN server (router). Same result in such different situations
Same problem here. Using hideipvpn.com service. No internet connection when connected to vpn
up? Somebody help pls
Old WinMo works excellent but my new Android doesn't want