Develop Bugs

does NE1 have the answer to wifi not connecting to the net

im trying to get an internet connection through my wifi connection. i have done search's and lots of people seem to be asking the same question but nobody has the answer.
at the moment i can access my c: using an application called Resco explorer. but i can not connect to the internet. im not sure what setting i should have on the wifi manger and on my pc. im also using AOL as my isp.
PLS PLS help :lol:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????

looks like a no then

I got mine working but setting my wireless network adapter to connect to "Work".
Under Settings>Connections>Tasks>Manage existing connections>Proxy Settings> check the "This network connects to the internet" box
then
Under Settings>Connections>Advanced>Select Networks> "Programs that automatically connect to the internet should connect using:" to "My Work Network" (and the same with one for private network)
Also in your active sync settings, make sure your connection settings allow network (Ethernet) and RAS connections.
From previous research around this, i'm pretty sure you can only use the internet pass through under "WORK" settings only.
*thought i'd better register and contribute as i've gained a fair bit from this forum.

no good anyother ideas. i have searched through hundreds of threads and still no go
help pls

Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings.

i have done this on both my wifi network and my isp network.
still not working

Have you checked if you're getting an IP address from your Wireless Router's DHCP server? Also DNS settings and Gateway address should be there.
You can check this easily by using vxUtil (free )

these are my settings:
tiacxwln1 - tiacxwln compatible wireless
Ip address 192.168.0.2
subnet mask 255.255.255.0
default gateway 192.168.0.1
primary DNS 192.168.0.1
secondary dns
primary wins
seconfdary wins
DHCPs server 192.168.0.1
under serial usb
IP address 192.168.55.101
subnet mask 255.255.255.0
default gateway 192.168.55.100
primary DNS 127.0.0.1

Getting this error when I tried to allow my broadband connection to share with my wifi connection. If I unplug the wifi connection and try and share with another network I don’t get any errors.
Internet connection sharing (ics) cannot be enabled due to IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1 please ensure that no other client on the network is configured to use 192.168.0.1

hmmm ... ever had the same problem. all devices are able to connect to the same router except mine sx66.
then i change the router's channel to '1' .. tada .. now everyone is connected. it might sounds silly, but it worked for me.
try changing your ap wireless channel.

Re: does NE1 have the answer to wifi not connecting to the n
robboy said:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
Click to expand...
Click to collapse
i found the problem with activesync 3.8 and 4.0 somehow, so i reverted back to 3.7, now wifi can sync.
afaik, connecting to internet has nothing to do with activesync. its a direct connection to wifi router. use work location and check the proxy settings if u hv any? (at home i use connect to internet without proxy, at work i use connect to internet with proxy).
Also, for Activsync with wifi, make sure that the WINS server address is that of yr PC u want to sync with.

Connectivity VPN problems with WM6

I have been testing most of the WM6 version but impossible to stablish a connection using VPN. I create it but Activesync doesn't connect it. Do you have some problems?

I'm not sure exactly what you are asking but if you are trying to establish a VPN connection to a server through an activesync connection then it isn't a WM6 issue, WM5 won't allow a VPN connection through activesync either.
WM6's VPN does work, you'll need to connect through a wifi or 3G/GPRS connection to use a VPN as activesync won't allow VPN passthrough.

Taz69 said:
I'm not sure exactly what you are asking but if you are trying to establish a VPN connection to a server through an activesync connection then it isn't a WM6 issue, WM5 won't allow a VPN connection through activesync either.
WM6's VPN does work, you'll need to connect through a wifi or 3G/GPRS connection to use a VPN as activesync won't allow VPN passthrough.
Click to expand...
Click to collapse
I didn't explain correctly, sorry. Previously I define at My ISP the gprs connection of my operator, and in My Work Network only the vpn details. Just when activate activesync, the system connect first to the isp and later the vpn.
did you check on wm6 with a vpn connection? what steps to define please?

To use your VPN you'll have to disconnect from activesync and use either your GPRS connection or a wifi connection to connect to your VPN server.
The exceptions only work for specific WM application, for 3rd party applications and (inc the Remote Desktop Mobile app) you'll have to connect manually by navigatinging to your work's settings VPN tab and selecting Connect.

Taz69 said:
To use your VPN you'll have to disconnect from activesync and use either your GPRS connection or a wifi connection to connect to your VPN server.
The exceptions only work for specific WM application, for 3rd party applications and (inc the Remote Desktop Mobile app) you'll have to connect manually by navigatinging to your work's settings VPN tab and selecting Connect.
Click to expand...
Click to collapse
I mentioned Activesync because my corporate mail, based on exchange, uses VPN to autent.

Sorry wasn't quite sure how you were connecting, think I have the icture now.
IT sounds as though your VPN is working okay if You get a connection to GPRS followed by VPN connection.
In that case does your exchange server require SSL for the activesync connection?
If it does then you'll need to use the same name within your activesync configuration as the name entered on the SSL certificate.
Could you please give some more details such as any errors that are generated by activesync and also confirm that you do get a VPN connection during the connection process.

Adhoc Wifi internet sharing, HELP

I've been looking endlessly to find out how to share my internet connection with my mobile device over an adhoc wifi connection. I know most will say get router as they are very cheap but there must be a way to do this without a router.
I have enabled ICS on my internet connection in vista but the IP's that are assigned to both the pc and mobile connection when the devices are connected are temporary in the range of 169.x.x.x
The bright side of things is that I can share files seamlessly between the pc and the mobile device, which means all is good except for the internet. There must be a way to bind the device's ip to enable it to share the internet of the PC.
I have searched and searched and I have found nothing. Your comments and suggestions would be greatly appreciated, in other words HEEELLLPPP

You need to bridge the Wi-Fi and internet connection. You do this in Control Panel, Network & Sharing Center then 'Manage Network Connections' on the left hand side.
A new page will open showing your internet connection and your wireless connection. Hold down shift and left click on each of them. Next right click on one of the icons and select 'Bridge Connections'

Thanks MaskedMarauder, sadly though my broadband internet connection is through a dialup and hence I cannot bridge the dialup and the wireless connection. If that only can be done somehow, the problem would most definitely be solved.
Thanks for your help.

the way ya doin it with ICS will work. you need to goto properties/advanced...Internet connection sharing and hit the settings button..then tick the DHCP boxes, that will broadcast the IP so ya winmobile will get a DHCP IP address. thats for XP but it should be pretty similiar. I was having heaps of probs getting ics to work adhoc...
you may need to re setup ICS thou, because it wont work unless it uses the IP given when ya first set it up, eg. you cant have manually setup IP addresses in the wifi card.

Thanks Speedn, it looks like you've been through what I'm going through now. Unfortunately again on vista there's no way to adjust the DHCP for ics. I remember having similiar problems on xp but I've resorted to setting the ip's manually and all worked fine, downside was that I had to manually undo everything to connect to a regular access point. On vista that doesn't work though.
Vista is certainly doing something weird here with assigning the ip's.
Thanks anyway for your input.

VPN and Remote Desktop

Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!

here's remote desktop. How do you use it? I don't know how to set it up.

thanks!!!!
now for VPN....
cheers!

The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse

Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks

fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....

Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot

if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik

for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.

L2TP VPN Doesn't work on native MIUI 11.0.3

Hello everyone,
as noted in the title of this thread, I cannot connect to L2TP/IPSec VPN Server from my phone (Redmi Note 8 Pro, running MIUI 11.0.3 stock).
I've done extensive troubleshooting and appears that phone never even contacts the server. When i configure everything and toggle the VPN, it will try to connect but never does, and then times out.
I'm watching the logs on the server, nothing appears.
I'm watching tcpdump on the server, no packet is even received from phone.
I've connected to WiFi network from i which i know i can connect to VPN (for example from PC or my MikroTik router) and it cannot even connect from that network.
I've enabled packet sniffer on root MikroTik router to sniff the packets, filtering MAC address of my phone, and guess what... When i click on VPN, it doesn't even try to connect to VPN serever. VPN server IP address doesn't even appear on sniff.
I'm wondering why is this happening, is anyone else having issues with L2TP/IPSec VPN? How do i inform Xiaomi of this issue since I've placed couple of feedbacks back in the day, never received an answer and those issues still persists so i don't even thing they are reading the feedback that is sent to them from phone app.
Hoping to get to the bottom of this!
Any help would be greatly appreciated !

Any chance you can try the OpenVPN app? I used to have an issue with my old phone where sometimes it would say connected but it wouldn't be. With the rn8pro, OpenVPN works every time.
Edit: try posting on the Mi forums for a better chance of a response from someone at Xiaomi
https://c.mi.com/global/forum-2234-1.html
Might not just be Xiaomi....https://github.com/SoftEtherVPN/SoftEtherVPN/issues/571

I would hate having two VPN servers installed at the same time. There are times when i want to connect my root mikrotik router to VPN server i question to forward all web traffic via VPN, unfortunately, OpenVPN support is very limited on MikroTik , there are new cipher suites missing and with new OpenVPN servers in place it's impossible to connect tik to OpenVPN.
I know however that OpenVPN app works great with android, but it's weird that native L2TP doesn't seem to be working at all.
I could fall back to PPTP maybe. Both Android and MikroTik works flawlessly with PPTP. But... It's PPTP..
Thanks, i will try posting to Xiaomi forums as well.