Hi everyone, i had this error when i was flashing a ROM on my universal, when i started the flash it just stucked at 7%. and now i cant flash anything to it, theres something can i do?
Details:
Bootloader works but doesnt flash, when the flash progress reaches the 7% it stucks and in the pc appears "ERROR 112: CE ROM UPDATE ERROR"
and theres no system on the universal.
the curious thing here, is that i was able to update radio, but no CE or Extended.
Can anyone help me with this?
its maybe the EEPROM ? theres a way to fix it? and how to ?
Wich are the commands to enter to the eeprom and reflash it with PuTTY?
it may work..
Help Pleasee!!!
i would suspect that you would have more readers with knowlage about these things in the forum for your device
ok. yes i have 1 thread on the universal site, thanx , but if anyone has a solution or maybe ideas or methods to unbrick it. PM .. n__n thanx
HEY!! thanx for all those who helped me, now the problem was solved, with a code with mtty
Thanx
hi i have the same problem, can you tell me how to overcome it? what code did you use? thanks
Related
I tried to flash WM 6.1
and then Give me Error and now i have a black screen
any one can help me please!!!!
this would help
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
best of luck..
i tried all of that but not working
What error is it ?
i treid to upgrade to windows 6.1 , while i'm updating gives me error and i tried to restart my mobile but nothing at all even i can not access the bootloader
Is your computer recognizin' your PDA. What happens when you connect it to the USB port ? Also, try after removin' SIM and the SD.
P.S: And you still need to tell me, what error msgs do ya get ?
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
I presume that you are tryin' to install the ROM designed for Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
try this, or search xda-developers usin' google, you may find the solution.
Error code 101 is actually connection error.
hey, are you usin' Windows Vista
no XP SP2 , but as i told you i think i installed rom not for universal
also my screen is dead nothing at all only black no serial or usb on the screen
aahmed12 said:
no XP SP2 , but as i told you i think i installed rom not for universal
Click to expand...
Click to collapse
Oh man,
you have screwed up your phone big time. Post a thread in General Discussion> Upgrading, Modifying and Unlocking. Someone there might b able to help you out on this.
All the best.
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Isaygarcia said:
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Click to expand...
Click to collapse
hey bro, error 112 actually denotes ROM update error.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
follow Method 2 , if it doesn't work, then follow Method 1, mtty may prove useful in this situation.
Good Luck..
thanks !
i havent tried the method 2.. but method 1 doesnt seem to work..
many thanx..
ok that methods doesnt work.. im stucked not in bootloader... i can exit bootloader but the system doesnt start... when i press the reset button it just keeps white screen (w/o backlit) and nothing happens.. if i connect the phone in that state just unrecognizes it and if i press the light and power buttons (without resset) it starts the bootloader.. its not reading the rom
every time that i try to flash a rom on it just fails, and it gets the error 112, on every 7%... how can i fix it?
Oops! I omitted the quote
aahmed12 said:
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
Click to expand...
Click to collapse
I have the same problem. I mistakenly flashed the wm6.1 rom meant for BA. I dont think there is any remedy for this problem because the unit is not coming on and so cannot enter bootloader. The only sign of life is the red led which means the unit is not seeing the power supply ie it does not recognise that a battery is instaaled. No one has ever come up with a solution. The unit is bricked fullstop. I am already bidding on another unit on ebay.
i did chat with imate support and they advice me to go to any service center and they will fix it.
i tried many kind of solutions but it does not work so my last choise is to send it to imate service center.
aahh something happened when i tried to flash a rom on my universa, i connected it to the pc, and started the proccess as allways, but.. it stucked at 7% and then error!!! and now i cant flash anything!! what can i do???
Isaygarcia said:
aahh something happened when i tried to flash a rom on my universa, i connected it to the pc, and started the proccess as allways, but.. it stucked at 7% and then error!!! and now i cant flash anything!! what can i do???
Click to expand...
Click to collapse
AND theres an error, 112 Update error can anyone help me??
help please!!
Quihubole paisano! Sorry, even if I speak spanish, this is an english forum so...
If you haven't had any answer yet is because that question might well have been answered several times, you have to be patient and search the forum and the wiki, even if I have never had that problem (fortunately) it is somehow "common", there are several methods, involving sometimes the need of getting the PDA in bootloader mode, attaching it to the PC and using a serial communications program (such as hyper_terminal), also if I remember well, the great MAMAICH have it's own method, so, look out, dig, read, lose your sleeping hours and good luck!
After that, if you're still having problems you will certainly propose a better question that someone might answer...
Animo
Hey thanx!! i think its bricked, now i need to unbrick it.. it can help because it can be posted on WIKI! and may be usable as well for all..
Ok slow down we need a bit more info
What rom did you have before
What exactly did you do
And witch rom did you try !!
ok step by step.
I was happy a sunday morning, and i was reading this forum lala.. Happy..
then...
i saw a rom ... that rom was WM6.1 http://forum.xda-developers.com/showthread.php?t=365335
i flashed it.. it worked fine but i had so low memory.. then i continued reading that thread, and found that someone changed the pagepool and gained memory, and i downloaded the modified version.
well, when i tried to flash it.. the phone just got unrecognized by the pc (when it tried to enter the bootloader with the RUU, as allways) and became nonresponsive... then i did a reset.. and nothing.. then i did a hard reset... and nothing... and then... i entered to Bootloader manually, and it worked... and i started the flash... but... when it reached the 7%.. it stoped and typed "ERROR 112: CE ROM UPDATE ERROR" and it happens with every single rom i try to flash...
i got some conclusions, maybe the SPL or something has corrupted the rom settings, but i dont know how to fix it.. can you help me?
HEY!! many thanx.. the problem was solved with mtty method, but with another code...
many thanx..
i will put the method here in a while (breathing DEEP)
Hey mate, as i told you in that thread, those 2 methods in wiki, they work
Congrats, mate.
Isaygarcia said:
ok step by step.
I was happy a sunday morning, and i was reading this forum lala.. Happy..
then...
Click to expand...
Click to collapse
, i liked the way, you explained it.
Ok. The way i solved the Problem was the MAMAICH method, wich is:
1. Enter Bootloader.
2. Disable Async (task manager, end task)
3. Connect Universal via USB (in bootloader mode)
4. Run mtty (found in wiki)
5. In mtty, write USB on the left corner (it says COM1)
6. Press OK button on the right upper corner.
7. A window should appear, press enter, after that, you can see a "USB>" thing.
8. Write "task 28 55aa" (without quotes).
9. A process appear on screen (nothing in the Universal)
10. Well done, now you can flash any ROM again.
Thanx for all those who helped me. n____n
@rohitsharman: haha yeah..
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
aali-01 said:
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
Click to expand...
Click to collapse
You must flash the rom using MTTY
http://forum.xda-developers.com/showthread.php?t=540290
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
aali-01 said:
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
Click to expand...
Click to collapse
There is not a perfect radio.You must flash some radios from
http://forum.xda-developers.com/showthread.php?t=470306
and check which is the best.
As for 1.20 olinex i think you must upgrade to 1.93
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
aali-01 said:
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
Click to expand...
Click to collapse
i have 1.17 official diamond radio.But in every rom you flash there is a radio that chef recommend.
http://forum.xda-developers.com/showthread.php?t=580490&highlight=RADIO
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
aali-01 said:
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=4fQE0P3diKg
This a tutorial from awran5.
Search and the first link "the definite mtty thread"
brother i have tried everything but still not able to get USB in the combobox
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
aali-01 said:
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
Click to expand...
Click to collapse
Happy that all gone well.
Thanks to xda
You have to download the official rom from the htc web site... then flash it and after that flash first the recomended radio and then the rom that you chose...
I dont know if you already know but.... rename any rom that you want to flash with this name...DIAMIMG...and then copy it to the internal storage....after that restart....and press backwards and volume down keys together and install the new ROM....by pressing the power key...
think this will help
try this will definitely work cause i have same problem too!!
read carefully and try it if u have this problem u have to use mitty everytime u flash(i think cause for me is every time i flash new ROM)
xxxx://forum.xda-developers.com/showthread.php?t=540290
replace xxxx with http
Thanks to all man. my problem is solved.
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.
heloo everyone! i have a problem with my phone ... while i was installing kavanas rom, my brother came and disconected my phone now ...
when i reboot it on my screen appears 3 colors red green and blue .. with usb in the left,
i run the RomUpdateUtility - has conected but at 3% the phone disconects ( utility say error 270 update error the image file is corrupted please check update utility)
if i try to run the instalation from the begin my pc does not recognize it
i could do something ? or i should start kicking my brothers ass ???
p.s. and tried the cold reset ..
thenx for future help
ok i found this tutorial ... verry good what can i say http://forum.xda-developers.com/showthread.php?t=540492&page=2 first to things not worked .. i need a goldcard... anyone have thoes files because i do not have a and dont know anyone with another windows moble! soory for my bad English
mememe1 said:
ok i found this tutorial ... verry good what can i say http://forum.xda-developers.com/showthread.php?t=540492&page=2 first to things not worked .. i need a goldcard... anyone have thoes files because i do not have a and dont know anyone with another windows moble! soory for my bad English
Click to expand...
Click to collapse
you can get QMAT at http://psas.revskills.de/?q=node/6
any tutorial for this??? and Revskills version : 2.04.1 is qmat??? from that link
This has been asked many times. Please post in correct threads that are already open.
On that note, thread closed.