Develop Bugs

ERROR 112 Help.

Hi everyone, i had this error when i was flashing a ROM on my universal, when i started the flash it just stucked at 7%. and now i cant flash anything to it, theres something can i do?
Details:
Bootloader works but doesnt flash, when the flash progress reaches the 7% it stucks and in the pc appears "ERROR 112: CE ROM UPDATE ERROR"
and theres no system on the universal.
the curious thing here, is that i was able to update radio, but no CE or Extended.
Can anyone help me with this?

its maybe the EEPROM ? theres a way to fix it? and how to ?

Wich are the commands to enter to the eeprom and reflash it with PuTTY?
it may work..

Help Pleasee!!!

i would suspect that you would have more readers with knowlage about these things in the forum for your device

ok. yes i have 1 thread on the universal site, thanx , but if anyone has a solution or maybe ideas or methods to unbrick it. PM .. n__n thanx

HEY!! thanx for all those who helped me, now the problem was solved, with a code with mtty
Thanx

hi i have the same problem, can you tell me how to overcome it? what code did you use? thanks

bricked diamond?

hi to all.
Please help me to repair this Diamond... It does not power on, or enter boot mode
It came from a friend who tried to unlock it without sucess and phone was working fine before...
Is there a way to force bootmode? by hardware or something?
Thanks to all.

Can't get into bootloader mode

Hi, I am Lucas from ARgentina again.
Sorry guys but I can not get into bootloader mode with mi Imate Jaq3, I tried a lot of thing I have been reading but no luck
do you have any special button or something like that?
I tried pressing camera button, holding send and end buttons, but nothing.
any idea?
pls help me! I have already downloaded the new rom and I am not being able to tried it because I can not get into the fuc... bootloader mode
thanks!

Need help with XDA Orbit

Hi Guys,
I'm a noobie and need help with the orbit.
I tried updating to the orbit_WM6 which I downloaded from rapidshare. It said if the rom update freezes then you stop it by resetting the xda. I did this but now the xda doesn't seem to be going passed the screen where it gives you the information "IPL 3.04.0001 etc". When connected to the laptop it's not picked up by the computer!!
What shall I do? I haven't bricked it have I?
Thanks for the help in advance

Not flashed properly dude...reflash it again...Btw, are u able to invoke your phone to boot loader mode...

earthwind3 said:
Not flashed properly dude...reflash it again...Btw, are u able to invoke your phone to boot loader mode...
Click to expand...
Click to collapse
When I connect it to the computer it doesn't recognise it so how can I reflash it?
I can get to the bootloader.
The information I get on the carrier screen (02 Welcome) is as follows:
IPL 3.04.0001
SPL 3.04.0000
GSM 03.06.90
OS 3.4.0.0
Please can someone give me some step by step instructions?

If I try using start_uspl I get an error 'No device connected' and it says 'Can't spawn "cmd.exe": No such file....'. It fails at line 69 and then completly stops at 81.
Any advice?

earthwind3 said:
Not flashed properly dude...reflash it again...Btw, are u able to invoke your phone to boot loader mode...
Click to expand...
Click to collapse
I've managed to get to the bootloader where it say's 'RUU' in the top right corner. What can I do next guys?

samsung s5230 stuck on phone lock

hi guys,
i got a samsung s 5230 (toco lite), and it is stuck on phone lock when i turn it on.
is there a way,where i connect it to usb to get the code with a program.
or if i hold down ( down volume,camera,power button) the phone turns on,it wont go to the down load screen/ unless i am doing it wrong?? so i dont know if i can re flash this phone.
thank-you if you can help me!!

-minty- said:
hi guys,
i got a samsung s 5230 (toco lite), and it is stuck on phone lock when i turn it on.
is there a way,where i connect it to usb to get the code with a program.
or if i hold down ( down volume,camera,power button) the phone turns on,it wont go to the down load screen/ unless i am doing it wrong?? so i dont know if i can re flash this phone.
thank-you if you can help me!!
Click to expand...
Click to collapse
you forget pattern/pin or what ? the easy way is to flash again by Odin
keep things as simple as possible I suppose you do not have important data on phone if so just flash again !

Would you have a link to the latest flash files please.

-minty- said:
Would you have a link to the latest flash files please.
Click to expand...
Click to collapse
read on this thread
or just search here (enter 5230 as search string)
you need to subscribe to get access to download link
also you have flashing tool and tutorial on this site search for it !
http://www.sammobile.com/firmware/?page=1&t=2

cheers guys, i found a flash.
now when i started the flash the battery fell out.
have i buggered up the phone????
can i repair it somehow?
please can you help me..
thanks.

-minty- said:
cheers guys, i found a flash.
now when i started the flash the battery fell out.
have i buggered up the phone????
can i repair it somehow?
please can you help me..
thanks.
Click to expand...
Click to collapse
-flash again by Odin check if you can enter recovery/download mode by keys
-when your phone is starting you should see a samsung/android logo this is botloader image..if you can't see it phone is bricked it means bootloader is affected and you need service tools to repair bootloader
never flash it without checking battery status at least 50% and use a laptop on battery to avoid power surge problems

Samsung s5230 is run properiatly os so you cannot use odin, but you can use mulitloader program to flash stock firmware to your phone.