having accidentally deleted ALL of my extended rom (Unlocked it, tried to install Tomtom on its own, device hung for ages and then soft reset - wiped the whole Extended Rom) I now have a completely vanilla device. can anyone post a list of what was on the extended rom so i can see if i´m going to miss anything. i had tomtom mobile on my old xda mini s but it doesn~t have the option to use an internal gps device so don~t know if i can use it on artemis so i~ll look at that later...
thanks
howdy,
what exactly do you need???:
english tmouk is on the wiki. (complete update routine)
german extrom ? http://www.ppc-welt.info/community/showthread.php?t=100190
02 german?
Dear,
I have the same problem.
Can someone post the French Extended rom from HTC.
Thanks in advance
It was the HTC version
Hi,
It was the HTC P3300 version of the ext rom i was after. just a list of whats on there, or a copy of the cabs if anyone has them. I've reinstalled Tomtom (a genuine licensed one) which works so i just need to work out what else i lost from the ext rom.
Cheers
p.s.
...what is tmouk? is it t-mobile UK?
It is T-Mobile UK
Hi!
I've installed mUn's Rom, but from yesterday I've a problem. I have signal, but I can't make/receive calls and message because signal is false.
I've tried to go back to original rom, but it's impossible because after update process process during the automatic installation of original HTC plug-in, my trinity reset himself when installation is yet incomplete and after soft reset the comm manager has some carachters of mUn plug-in, and my signal is one more time false!
Now I have a little bit of original rom and a little bit of mUn's rom...How can I return completely to original rom?
Sorry for my english, but I'm italian
.
Thanx.
you must download ROM from hTC site: http://www.europe.htc.com/support/index.html?device=htcp3600unload,or from pocketdevice site: http://www.pocketdevice.it/
then it dawns like as you have made when you have installed WM6
I do it! But remains some carachters of mUn release! (for ex. commmanager)...
flashing Hard-SPL first should help
Yesterday I started to get problems with my HTC Touch Diamond. I flashed my device with udK Syrius HD R0 (BETA 5) and everything was going smooth, restored my contacts, my messages and tweaked WM6 a bit.
But after a soft reset to apply all changes the device welcomed me with the ordinary "You're using your device for the first time" message and I had to setup my device again. After another soft reset my device hung at the boot screen with ROM information and the "Touch Diamond" text.
All I could do now was a hard reset. But the problem didn't go away... the device kept freezing and resetting, and I had to do 2 or 3 more hard resets before I decided (actually I already had, but had to wait for the download to finish ) to flash to another ROM.
So I downloaded Vic Hybrid 2 Diamond ROM UC. Flashed and everything seem to went fine. But just as before, after a soft reset the device hung. Hard reset...
Why's this!? Is my HTC Touch Diamond broken or is there anything I'm missing? Perhaps this occur because of the ROM's is based on the firmware 1.97??
EDIT #1: sorry, wasn't meant to create this topic under "ROM Development"... Any mod, feel free to move it.
EDIT #2: Seems one more guy had this a relating problem after ROM flash (udK's ROM for that matter too): http://forum.xda-developers.com/showthread.php?t=455335
EDIT #3: "The device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source. Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings."... didn't have time to press any "SEND" button either... it continued to... guess? The setup! Entering date + time + calibrating the stylus...
*sigh*... not it happend again. Just restored all my SMS and tried to thread them again (screw that either way!), soft resetted my device... and the damn WM6 setup guide for clock, calibration showed up, and now "Installing..."
*sigh - again*
hi dude i had the same problem
i have a DIAM300 and had the olinex 1.40 hard spl with mossis rom 2.5 (ger)
i flashed mossis 2.6 which is based on 1.97 and i had those problems too, after a few softresets it makes a hardreset...then i tried olinex 1.93 thought it could be the bootloader but the problems were still there...
i tried some other roms, udk Syrius too which is fast as hell, but unfortunately the same problem here and sometimes it even didn't boot...
i made about 50 softresets, 20 hardresets, flashed bout 10 times....then i had enough, flashed the original O2 rom, flashed the original bootloader, flashed the original rom again, and now everything is allright, it's runnin, no hardresets, i tried about 20 softresets, installed software blabla....
but now i'm wondering if the problem will be there again when i start to flash
and its really annoying when u flash a rom, customize everything, everyting seems to be allright and then it makes a hardreset instead of a softreset....
gizz68erz said:
then i had enough, flashed the original O2 rom, flashed the original bootloader, flashed the original rom again, and now everything is allright, it's runnin, no hardresets, i tried about 20 softresets, installed software blabla....
Click to expand...
Click to collapse
Damn, I don't want to flash to the orginal ROM! Just flashed to a ROM I've tried earlier, based on 1.93, Panosha ShineOn, so let's see if there's any more trouble...
gizz68erz said:
but now i'm wondering if the problem will be there again when i start to flash
and its really annoying when u flash a rom, customize everything, everyting seems to be allright and then it makes a hardreset instead of a softreset....
Click to expand...
Click to collapse
Yeah, I feel the pain. Getting sickin' tired of this **** now!!!
Try this one
Hi
Whenever i have this kind of bizar issues [ also with previous devices i had before my Diamond] i did the following:
1. Flash back to original official ROM including Radio [ no need to compelrte the initial setup , just flash and go back to bootloader screen right after]
2. Flash again to the targeted cooked ROM
3. Probelm disapeared
My assumption is that for some cooked ROMs the coverage of files been flashed and replaced is not 100% and therefor we face inconsistancy issues.
Try it
my view of this
my view of this:
new roms have other architecture such as new manila new drivers etc etc (1.97)
when you "tweak" them such as manila mods wich are made for older versions this kind of problems can happen. the problem is we have to many modded roms right now. we have 1.37 roms 1.93 roms 1.94 roms (ported from raphael) 1.97 roms and so on. all of this roms you cant compare with each other.
a example: HTC Diamond Manila has no LANDSCAPE files. every rom wich has landscape support had included RAPHAEL Manila parts. no one can deny this. cause its the only device right now that offered the landscape support on manila. but looking to diamond application and software section here and the date this files were made are back in the past. this is just a example where this problem result of.
just my 2 cent
alphazero said:
my view of this:
new roms have other architecture such as new manila new drivers etc etc (1.97)
when you "tweak" them such as manila mods wich are made for older versions this kind of problems can happen. the problem is we have to many modded roms right now. we have 1.37 roms 1.93 roms 1.94 roms (ported from raphael) 1.97 roms and so on. all of this roms you cant compare with each other.
a example: HTC Diamond Manila has no LANDSCAPE files. every rom wich has landscape support had included RAPHAEL Manila parts. no one can deny this. cause its the only device right now that offered the landscape support on manila. but looking to diamond application and software section here and the date this files were made are back in the past. this is just a example where this problem result of.
just my 2 cent
Click to expand...
Click to collapse
Yeah, I bet there's some issues with the new 1.97 and all the new drivers. The chefs need to get stuff straight before I'm trying any new 1.97 based ROM out again.
My issue seem to have been fixed after flashing to Shine On 2.4 Full (1.93 based!). My device now soft resets OK, and I keep all settings... well, atleast for the moment. I'll continue to soft reset every now and then to see if the problem comes back to me.
Yeah, got EXACTLY the same problem with ROMs based on Touch HD or Quartz OS built Hard SPL 1.93 And I don't use any manilla mods, prefer its original view with original tabs. All I have is some portion of software to install:
- Inesoft Cash org;
- Inesoft Address book;
- Agenda Fusion 8;
- Alreader;
- Auto keeper;
- HiCalc;
- Navitel Navigation system.
and the only "tweak-like" soft I use is Answerkeysdisabler. But having serious intentions to reach the truth I didn't install it.
When I've tried to flash syrius beta 02 AND beta 05) I got a STABLE hard reset after 3-5 reeboots. And it doesn't correspond with the quantity of soft installed, it's just resets and thats all.
When using Aztor v7 i had 99% hangup when installing my software just after HR, and it always hangs on different program installation, then, after reeboot manilla cannot start.
These are very interesting ROMs, especially I like AZTOR's pholosofy, but... couldn't manage to give it a try
Tried SwiftBL's, Dutty's, Bepe's ROMS - all smooth and fine. And the STABLEST FOR ME was the old bElite 0,99d. NO issues at all! Now i'm usind Dutty's 3,4 in general it's stable and ok, but with some minor issues. Would be really nice to have issue-free ROM based on new versions of software.
Hi there
This is my first post.
So... to the story:
I've been searching on Google for the past few days for a clean WM6 ROM for my Loox n520 and couldn't find any. I've only found a modded rom with the original Windows Live and other apps removed.
Why am I asking for a clean rom?
Because I want to sell my PDA with a clean OS installed. Then the user will install any apps.
Thank you to those who help!
bump bump bump
Presumably you have a N520 with WM5 (the original supplied operating system)? If so, why don't you just do a hard reset which takes the device back to a "clean" machine or factory state with no user data or applications installed? Then a new user can choose whether to upgrade to WM6 etc....
The same comment applies if you have upgraded already to a new WM6 ROM. Just do a hard reset! (The original FSC manual should tell you how to do it, and it IS different to a soft reset.)
Hello,
i have a new HTC Touch pro 2
how can i delete the Tmobile theme,software & add's
the phone is simlock free
but the adds are irritating me ,
how can i get the orginal htc theme & softwares
I don't know if this will work on the TP2, but on previous phones if you didn't want the carrier's crap installed, do a Hard Reset & right after it shows the WM splash screen do a Soft Reset so that the configuration doesn't start up.
You may want to try that.
is HARD-SPL safe ??
because i installed HARD-SPL on my HTC TOuch pro 1 , and it was tottaly bricked, i couldnt start
& what kind of HARD SPL do i need ?
ah its done now, thankyouu
i installed hard-spl and than flashed with official patch
atjee said:
Hello,
i have a new HTC Touch pro 2
how can i delete the Tmobile theme,software & add's
the phone is simlock free
but the adds are irritating me ,
how can i get the orginal htc theme & softwares
Click to expand...
Click to collapse
what ads? I have the tmo tp2 and there are zero ads.
he means Tmobile's add-ons, such as the program to check your usage & payment history & stuff.