Related
heading says it all really - i'm cid locked btw.
cheers
si
Yes, thanks to This thread.
Worth noting again, that first time around under Vista did not work, I had to dig out an XP based PC to re-flash the original T-Mobile UK WM5 ROM. I then ran the procedure a second time under XP and it worked. The OS may or may not have been the factor, first time round might have been something else. XP was required to restore the original ROM.
The update to WM6 was well worth it in my mind even if purely for the instantly noticeable speed increase of the software.
thanks gajet - i'm gettign more and more tempted. one more thing - where could i get hold of the original t-mob uk rom - just for safety.
cheers
si
if its anything like finding a WM5 tmobile NL rom i'll wish you good luck. couldn't find one after bricking my own MDA CIII trying to upgrade it to WM6.
if you brick it your only choice is to wait until the official WM6 release from tmobile UK or send it back to them for repair
hi fout
well looking at gajet's post it seems there is a uk rom out there in the wild - just wondering where i might find it....
si
I actually found you the link in the main WM6 WWE topic, it links directly to the file on rapidshare.
here you go: http://rapidshare.com/files/17854890/art_tmouk_11311001_024990_wwe_ship.exe
and good luck upgrading your device, can't wait until mine gets back
thx fout - i thought i'd seen it somewhere - you found it - cheers!
si
ok guys - i did it! worked first time - heart in mouth for 15 mins but well worth it. got all my apps working no problem and remembered to write down the t-mobile gprs settings for once!
one other benefit for uk t-mob. on web&walk standard you can't use your phone as a modem - but with this setup you can fabulous!
cheers
si
Installed it today on my MDA3c T-Mobile
But where can I configure the SMS messaging center # (+447958879879) ???
solved
from another thread (Hermes WM6) :
start>phone>menu(softkey)>options>services(tab). Select "Voicemail and Text Messages" then tap "get settings".
Hiya, that rom you posted, what rom is that? Is it an official t-mob one or is it converted from somone else? Thanks
Oh, and how does it work on the UK MDA with its missing wifi?
dannyoneill said:
Hiya, that rom you posted, what rom is that? Is it an official t-mob one or is it converted from somone else? Thanks
Oh, and how does it work on the UK MDA with its missing wifi?
Click to expand...
Click to collapse
hi danny
it works fine with the lack of wifi - just doesn't have a button in comms manager as before. the rom we're talking about in this thread is the official t-mob uk wm5 (five) rom - which is good to have in case the update goes wrong.
i'm using bepe's rom on my mda c iii and it's tons better than the original. just make sure you read the threads first for instructions.
good luck.
si
thanks, which wm6 rom do you recommend?
If anybody interested in my few hours expirience with MDA C III UK + WM6 here it is:
Device: MDA Compact III UK original ROM,
Unlocked before wth IMEI Check
First I used the USPL as advised by Pof here http://forum.xda-developers.com/showthread.php?t=311479
It didn't work first time. I had errors 260 and 270. I repeated the process and it went OK after second time. Then I flashed with the B&W V2 rom. It seemed to end OK.
Notes: Before the play I used latest SPB Backup and made full backup in FlightMode. First thing I did after waking the device in WM6 was restore from it. The process went OK. After restart I got tens of notifications about installing untrusted or something DLLs and EXEcs. After that it hanged and didn't even wanted to wake up anymore.
So - hard reset -> partial restore -> PIM data only and it worked.
Excel and Word are buggy in terms of file handling. You can forget about them for now or use only as readers.
Comm Manager was working only up to the first reset. Then all buttons are hiden under the last one in upper-left corner. You can actualy see them rendering one after another.
GPS checked using iGo 2006 - working fine.
Conclusion:
I'm going to check how it synchronises with Missing Sync on my Mac. The latest version sould work with WM6. If it works I think I'm gonna stay with it longer. Word & Excel is not used by me often enough to stop me trying this Rom. Comm Manager - though, can try to live without it.
I have just flashed with the black and blue rom and all is well apart from the comm manager, yup, all one big mess in the top left. think its something to do with wifi, it was fine on the first boot, it showed the wifi icon but now its reset its gone all funky.
Heya,
just tried to install a new ROM to my T-Mobile MDA IV with ROM 1.37.111.3 and Radio 1.00.25.03. I followed the Upgrade Instructions on http://modmydiamond.info. On Step 2 when actually updating my rom, which is supposed to take 10 minutes, a dialog appeared on my mda compact iv stating that an unsecure program tries to start and i have to choose yes or no. I choosed yes. It then only took like 1 minute and the progress bar on my pc stated 100%. I then performed the Soft Reset. Now after some time my Device stated its reinitialising itself... in the end my device didnt change and its back to the Original ROM.
I think it has something to do with my rom being unsigned? But i am really not sure since i am totally new to all of this. I tried reading everything up but the information is really wide spread.
If anyone could help my by posting accurate instructions on what i am supposed to do now to get a new rom working. Would be really great, my device is pretty slow atm.
thanks
I did the same yesterday, and i still got the original T-Mobile Rom.
Is it possible to change the rom????
I thing you have no-unsignet HardSPL.
Hello,
sorry. Do yu habe the orginal Rom vor the MDA compct IV? Ich have change it and i will back to the orginal.
Please Help.
Mecki
I believe you have just installed HARD SPL .., and not actually flashed a rom yet .. could be wrong though
I installed Hard SPL olinex. In GErman : unsiegniert.
I have after this install der V6 Rom from this sites
SORRY ABOUT My ENGLISH
Hi there,
after using my o2 Xda Diamond for over a month now on the original ROM, today I finally installed my first custom ROM. After reading through many of the cooked ROM threads, I decided to use the "SwiftBL-WWE-Diamond-v7-0-Lite-12MbPP", which i got here
http://forum.xda-developers.com/showthread.php?t=408109.
After downloading the ROM, I also got the HardSPL "Unsigned-Hard-SPL-Diamond-OliNex" from this thread:
http://forum.xda-developers.com/showthread.php?p=2312249#post2312249
which allows you to install the custom ROM.
After connecting my Diamond through Active Sync and the Mobility Center from my Windows Vista, I started the "ROMUpdateUtility.exe" found in the unpacked SPL folder, and pressed the "ok" button on the Diamond Screen to start the installation. After that the Xda Screen turned black, while the progress bar on the Windows update setup, not on the Phone showed 0%, directly after that it finished saying the connection was broken. I just started the "ROMUpdateUtility.exe" again and everything went the way it should.
After the restart I went to the unpacked "SwiftBL-WWE-Diamond-v7-0-Lite-12MbPP" folder to start the "ROM.exe" there, which starts the actual ROM installation.
After like 5min or something the Phone reboots, progs getting installed ect. and I was ready to use it.
Furthermore I installed a few custom applications and in two of them you might be interested in. Or lets say you should be, because they rock =)
1. A simple battery display tool "ArielBattery2" which can be found here:
"http://forum.xda-developers.com/showthread.php?t=364278"
and after changing the background color to black and the battery bar to white,
you get a perfect match with the TouchFlo3D theme used in the SwiftBL ROM.
2. A great config tool for TouchFlo3D "Diamond TF3D Config 0.6.7" which can be found here:
"http://forum.xda-developers.com/showthread.php?t=405749".
So far I am very pleased with my phone. Its fast, stable and everything goes the way it should. Im really glad I switched to the SwiftBL ROM, for me it´s a huge upgrade in every way to the default ROM provided by o2.
I also wanted to thank you guys for the hard work and the time you spend creating custom Software for our phones, I really appreciate it.
carcass
Hi There.
I think this should be in his thread.
/HallengreeN
Just switch over to SwiftBL rom from panosha's.
i had been a fan of swift rom since v2.0 ... can only say that he had the fastest and most stable ones around.
And why are this posts not is SwiftBL ROM thread?
yer init....
GLad to see you managed to get away from you O2 mould though
Hi All !!
First - Thanks alot for this forum! it's the BEST!
I'm currently using PDACornerPro.V27 on my TyTN. but the same error happend with Schaps, Corner v20 and another TouchFLO rom.
Whenever I install Paragon LENG hebrew support on my device it just disables any way of accessing the Phone Dialer and the Contacts. Removing it doesn't work either, once installed - it f#$ks it up for good.
I've tried searching the registry with no luck whatsoever...
Can any of you Hermes Gurus help me out here?
Thanks!
hebrew on tytn wm6
NEW HEBREW BY ME:
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
don't use the LENG hebrew,in addition to the problems u describe, its doesnt support the hardware keyboard of tytn.
personally this is what i do:
1.install Hebcert.cab from orange extended rom(attached below)
2.install 180407_HebrewTyTN.cab but DONT restart when prompted.
3.goto Progs. Lang setting(hagdarot safa 3 letters icon alef bet gimel) change the upper bar from the top option to buttom(it suppose to say interface lang. and the upper is hebrew the other is english but you cant c before reset)
4.now press (x) to reset
//////note: u dont have contacts hebrew browsing in the normal contact manager,
so use pocketCM with the setting.ini file i attached(just put in the pcm folder in progam files
//////also u dont have smart dialling for hebrew, so use this one jimmy98 made for us its works great with htc touch dialer also attached below(u can use different skin with hebrew letters).
ENJOY
Nimitz.
http://www.pocketcm.com/downloadfile.php?f=PocketCM-0.27.zip
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
Thank you so much!
haven't tried it yet since it requires me to flash a new rom, I'll get to it this weekend.
anyhow, thanks alot, it's nice to have a supporting community.
bekef dude
u know u can hard-reset right? that way u dont have to flash anew rom
but if u feel like changing anyways i recommend this ones:
http://forum.xda-developers.com/showthread.php?t=428597
http://forum.xda-developers.com/showthread.php?t=439973
i use the last one cause its lighter but if u dont feel like working much go with the first it has everything plus youtube and google maps etc.
Yeah, I know I can Hard Reset.. but I've been meaning to change to a new rom for sometime now, and Hard Reset will make me install everything all over again so I used the opportunity to flash.
I have a problem with the hebrew, Maybe you came across it too - after installing the hebrew, When I press the power button the device goes to standby and when I press the power again it doesn't get out of it until I soft reset it...
It renders the device quite useless..
P.S I've flashed the device with the rom u've recommended. it's reallllly fast.
Tytn Doesnt wake up
its a known issue hate it when that happens
you can read more here:
http://forum.xda-developers.com/showthread.php?t=273836
it happened to me a few times i still havent figuered out why,
but thebest solution is to change the rom,
try falshing another rom i'm working with the lighter one ive posted and it works smooth havent tried the other so i guess thats the one you flashed.
good luck
No luck... so far I've tried with 4 different ROMs and didn't succeed in any attempt, I've tried both of the ROMs you've recommended, PdaCorner v.27 RBSN 3G and CRC dev 14.1 beta... as I said, The hebrew installs fine but once the device goes to standby/power saving it just dies...
I've tried doing what the post you've ref'd me to offered - disabling the advance network features on the pc-usb connection and removing some addons like the Voice-Commander... no luck either... been at it all night
is it possible that HebCert.cab or 180407_HebrewTyTN.cab you've attached are not of the right version?
The Hebrew is WAAAAAAY better than Paragon's LENG (as long as the device stays on) that doesn't even let me use Opera past ver8.6, and I'd really hate to give it up.
Please advise..
the version of the hebrew is from my phone but is identical to the hebrew cabs from other orange tytn phones.
+iv'e dumped my ext.rom like a year ago then my phone broke (physicly) just last week and
the new tytn orange gave me had the same exact cabs for hebrew
(with almost the same rom newer version but wm5 uglyass green lame-o)
so that's not it for sure..
++it happened to me as well with several roms with the same hebrew cabs
for no apparent reason but now it works just fine.
+++u can always go back (assuming u backedup)to the original orange rom
that came with your tytn and dump the hebrew cabs from your ext.rom though it will be a waste of time.
one thing i did that help with the PDAcorner's older version with this problem was to update the HARD-SPL version to 2.3
..so check your spl version by reseting to the bootloader
(reset while holding the power button and the top left ok button)
if its lower than 1.40 theres a big chance an update would do the job..
http://www.mrvanx.org/thg/
update to 2.1 or to the latest then reflash i suggest to http://forum.xda-developers.com/showthread.php?t=439973
cause we know it works for sure.
+don't install nothing not even the hebrew..check if the device wakes then install ONLY the hebcert(btw:u install this first always) and main file but change the interface language before reset so it wont boot with hebrew menus even once..post back if the problem presists.. good luck
I Refuse to give up!!
Well, I did everything you offered, bit by bit -
1. Updated to HardSPL 2.1
2. Flashed to HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V5_WWE_12.11.2008
3. Did an ON and OFF tests, few times - after power off, soft reset eg.. (ps I found out that Soft Reset from the os doesn't work either after the hebrew installation - so I checked that too) - all worked fine.
4. I've installed the HebCert.cab and then the main file.
5. changed the interface language to english.
6. Reset and voila... same bug all over again
I thought maybe it had something to do with installing the hebrew while the tytn is connected to activesync so i did all that without it being so.
got any more ideas?
# _
listen this time youll get it stright,..
i think its all cause you got the WRONG rom..
i saw you wrote "HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V5_WWE_12.11.2 008" rom while i was talking about:
27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang
http://rapidshare.com/files/157947939/HERMES_WWE_3.62.502.20_B20921_Manila2D.rar as the lighter rom installed
anyways i felt kinda guilty cause i recommended it (though i told you i havent tested it but i guess you didnt understand to which one i was refferin)
so i flashed the rom you were talking about just to check
and suprise suprise my tytn didnt wake same as yours..
reflashed back to 27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang(http://forum.xda-developers.com/showthread.php?t=439973)
and TA-DA works like a charm..
so i would suggest to repeat the same stages as from your last message only this time with the right one
good luck buddy im sure this time itll work
btw the password for the file ishamQuang
If I haven't said it so far - thank you ever so much for your time and effort.
Well, I did write the name of that rom but I've tried both roms on the same process...
I did, however, manage to get some progress on another angle - I've updated my radio version (was the only thing we didn't cover) and now it works with the Manila2D rom. alas, nothing else seems to be working...
I've started to install all my favorite progies (Adobe Reader LE, PocketRAR, SPB Insight, JBED, Opera Mobile, Opera Mini, etc...) and everytime the darn phone hangs on one of the installation and just DIES... only hard reset can revive it...
I'm gonna start from scratch - tomorrow I'm gonna take a naked rom and start building on top of it... I must be doing something wrong. only good indication is that the phone can get in and out of standby WITH the your hebrew version - so I know the hebrew is ok.
I'll go thru with it tomorrow and keep you posted.
again, I really appreciate your efforts to help. thanks.
your very welcome.. to be honest its just cause were both israellis and also because i went through this crap myself but no one here could really help me i had to solve it myself..
i DID forget to tell you the first thing i did to the phone was to SUPERCID unlock it:
http://pof.eslack.org/hermes-unlocker/http://pof.eslack.org/hermes-unlocker/
try it if you havent already, mayb the protection is whats causin all the freezes. plus its unlocks the sim bull****.
GL again
BTW:
you dont need to install opera for manilla2d:
http://forum.xda-developers.com/showpost.php?p=2860699&postcount=4764
or use the file ive attached.
plus its better lookin htc version.
and use this as the PDF reader 100x faster than adobe:
http://forum.xda-developers.com/showthread.php?t=425268
http://www.4shared.com/file/69693567/504106d/Update_20.html?dirPwdVerified=2117bcd2http://www.4shared.com/file/69693567/504106d/Update_20.html?dirPwdVerified=2117bcd2
Great (Partial) Success!!
Ok! here's what I did and some conclusions I've come to:
1. flashed CRC r14.1 Big Storage ROM.
2. Installed ALLLLLLLLLLLL of the app's I needed prior to the hebrew installation.
3. Cleared all Caches, Temps, and MRU lists etc using SKtools.
4. Clean Start the device (SR).
5. Installed the hebrew, changed interface language and Soft reset.
6. Enjoyed my new revived device!!
now the only thing that DOES go wrong is the Java emulation, I've tried all available versions of Esmertec Jave (20080222 3.1M, 20080328.31 and 20080428.2.1) Tried installing to the device and to the SD and didn't succeed. I also tried to use the Device Update feature of CRC to get the latest java version from thier repository... didn't succeed either.
The thing is, before the hebrew was installed all versions worked fine, and after that NONE did...
I also think that this piece of software is what causing the device to die!!
After I remove the java emulator the device just hangs on the boot screen.
I've flashed my device numerous times with a whole bounch of ROMs, The conclusion I came to is that the hebrew worked on MOST of the ROMS didn't have JBED pre-installaed!
I would have checked it but I'm tired from flashing and installing stuff on my device for now, maybe next month... I gave up on using OperaMini since I don't have a working java emulator currently.
Which, if any, are u using?
Thanks for all the pieces of software you've recommended, I tried the PDF reader you suggested and I like Acrobat LE 2.5 Diamond edition better.,,
Anyhow - It's working now. so as my project instructor said - if it works - don't touch it!
Thanks alot for now! I WILL try to isolate the problem and keep you posted!
I Owe you man..
http://forum.xda-developers.com/showpost.php?p=1487409&postcount=67http://forum.xda-developers.com/showpost.php?p=1487409&postcount=67
http://www-jpc.physics.ox.ac.uk/ge
tjpc.html
i use it only when i get bored and start messin with stuff..
glad to hear u finnaly naild it
feel free to ask or recommend stuff to me espcially hebrew ot israel stuff
c u on the flipside
btw: i just found out something cool when you hold the green talk button from 2 sec it turns on/ff the speakerphone
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
badnimits said:
NEW HEBREW BY ME:
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
don't use the LENG hebrew,in addition to the problems u describe, its doesnt support the hardware keyboard of tytn.
personally this is what i do:
1.install Hebcert.cab from orange extended rom(attached below)
2.install 180407_HebrewTyTN.cab but DONT restart when prompted.
3.goto Progs. Lang setting(hagdarot safa 3 letters icon alef bet gimel) change the upper bar from the top option to buttom(it suppose to say interface lang. and the upper is hebrew the other is english but you cant c before reset)
4.now press (x) to reset
//////note: u dont have contacts hebrew browsing in the normal contact manager,
so use pocketCM with the setting.ini file i attached(just put in the pcm folder in progam files
//////also u dont have smart dialling for hebrew, so use this one jimmy98 made for us its works great with htc touch dialer also attached below(u can use different skin with hebrew letters).
ENJOY
Nimitz.
http://www.pocketcm.com/downloadfile.php?f=PocketCM-0.27.zip
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
Click to expand...
Click to collapse
Shalom,
Do you know if it works on an HTC Dual Touch with Windows Mobile 6.1 US ?
The HTC Dialer above is 2G version?
Are there any 3G version for WM 6.1?
Thanks
Yesterday I started to get problems with my HTC Touch Diamond. I flashed my device with udK Syrius HD R0 (BETA 5) and everything was going smooth, restored my contacts, my messages and tweaked WM6 a bit.
But after a soft reset to apply all changes the device welcomed me with the ordinary "You're using your device for the first time" message and I had to setup my device again. After another soft reset my device hung at the boot screen with ROM information and the "Touch Diamond" text.
All I could do now was a hard reset. But the problem didn't go away... the device kept freezing and resetting, and I had to do 2 or 3 more hard resets before I decided (actually I already had, but had to wait for the download to finish ) to flash to another ROM.
So I downloaded Vic Hybrid 2 Diamond ROM UC. Flashed and everything seem to went fine. But just as before, after a soft reset the device hung. Hard reset...
Why's this!? Is my HTC Touch Diamond broken or is there anything I'm missing? Perhaps this occur because of the ROM's is based on the firmware 1.97??
EDIT #1: sorry, wasn't meant to create this topic under "ROM Development"... Any mod, feel free to move it.
EDIT #2: Seems one more guy had this a relating problem after ROM flash (udK's ROM for that matter too): http://forum.xda-developers.com/showthread.php?t=455335
EDIT #3: "The device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source. Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings."... didn't have time to press any "SEND" button either... it continued to... guess? The setup! Entering date + time + calibrating the stylus...
*sigh*... not it happend again. Just restored all my SMS and tried to thread them again (screw that either way!), soft resetted my device... and the damn WM6 setup guide for clock, calibration showed up, and now "Installing..."
*sigh - again*
hi dude i had the same problem
i have a DIAM300 and had the olinex 1.40 hard spl with mossis rom 2.5 (ger)
i flashed mossis 2.6 which is based on 1.97 and i had those problems too, after a few softresets it makes a hardreset...then i tried olinex 1.93 thought it could be the bootloader but the problems were still there...
i tried some other roms, udk Syrius too which is fast as hell, but unfortunately the same problem here and sometimes it even didn't boot...
i made about 50 softresets, 20 hardresets, flashed bout 10 times....then i had enough, flashed the original O2 rom, flashed the original bootloader, flashed the original rom again, and now everything is allright, it's runnin, no hardresets, i tried about 20 softresets, installed software blabla....
but now i'm wondering if the problem will be there again when i start to flash
and its really annoying when u flash a rom, customize everything, everyting seems to be allright and then it makes a hardreset instead of a softreset....
gizz68erz said:
then i had enough, flashed the original O2 rom, flashed the original bootloader, flashed the original rom again, and now everything is allright, it's runnin, no hardresets, i tried about 20 softresets, installed software blabla....
Click to expand...
Click to collapse
Damn, I don't want to flash to the orginal ROM! Just flashed to a ROM I've tried earlier, based on 1.93, Panosha ShineOn, so let's see if there's any more trouble...
gizz68erz said:
but now i'm wondering if the problem will be there again when i start to flash
and its really annoying when u flash a rom, customize everything, everyting seems to be allright and then it makes a hardreset instead of a softreset....
Click to expand...
Click to collapse
Yeah, I feel the pain. Getting sickin' tired of this **** now!!!
Try this one
Hi
Whenever i have this kind of bizar issues [ also with previous devices i had before my Diamond] i did the following:
1. Flash back to original official ROM including Radio [ no need to compelrte the initial setup , just flash and go back to bootloader screen right after]
2. Flash again to the targeted cooked ROM
3. Probelm disapeared
My assumption is that for some cooked ROMs the coverage of files been flashed and replaced is not 100% and therefor we face inconsistancy issues.
Try it
my view of this
my view of this:
new roms have other architecture such as new manila new drivers etc etc (1.97)
when you "tweak" them such as manila mods wich are made for older versions this kind of problems can happen. the problem is we have to many modded roms right now. we have 1.37 roms 1.93 roms 1.94 roms (ported from raphael) 1.97 roms and so on. all of this roms you cant compare with each other.
a example: HTC Diamond Manila has no LANDSCAPE files. every rom wich has landscape support had included RAPHAEL Manila parts. no one can deny this. cause its the only device right now that offered the landscape support on manila. but looking to diamond application and software section here and the date this files were made are back in the past. this is just a example where this problem result of.
just my 2 cent
alphazero said:
my view of this:
new roms have other architecture such as new manila new drivers etc etc (1.97)
when you "tweak" them such as manila mods wich are made for older versions this kind of problems can happen. the problem is we have to many modded roms right now. we have 1.37 roms 1.93 roms 1.94 roms (ported from raphael) 1.97 roms and so on. all of this roms you cant compare with each other.
a example: HTC Diamond Manila has no LANDSCAPE files. every rom wich has landscape support had included RAPHAEL Manila parts. no one can deny this. cause its the only device right now that offered the landscape support on manila. but looking to diamond application and software section here and the date this files were made are back in the past. this is just a example where this problem result of.
just my 2 cent
Click to expand...
Click to collapse
Yeah, I bet there's some issues with the new 1.97 and all the new drivers. The chefs need to get stuff straight before I'm trying any new 1.97 based ROM out again.
My issue seem to have been fixed after flashing to Shine On 2.4 Full (1.93 based!). My device now soft resets OK, and I keep all settings... well, atleast for the moment. I'll continue to soft reset every now and then to see if the problem comes back to me.
Yeah, got EXACTLY the same problem with ROMs based on Touch HD or Quartz OS built Hard SPL 1.93 And I don't use any manilla mods, prefer its original view with original tabs. All I have is some portion of software to install:
- Inesoft Cash org;
- Inesoft Address book;
- Agenda Fusion 8;
- Alreader;
- Auto keeper;
- HiCalc;
- Navitel Navigation system.
and the only "tweak-like" soft I use is Answerkeysdisabler. But having serious intentions to reach the truth I didn't install it.
When I've tried to flash syrius beta 02 AND beta 05) I got a STABLE hard reset after 3-5 reeboots. And it doesn't correspond with the quantity of soft installed, it's just resets and thats all.
When using Aztor v7 i had 99% hangup when installing my software just after HR, and it always hangs on different program installation, then, after reeboot manilla cannot start.
These are very interesting ROMs, especially I like AZTOR's pholosofy, but... couldn't manage to give it a try
Tried SwiftBL's, Dutty's, Bepe's ROMS - all smooth and fine. And the STABLEST FOR ME was the old bElite 0,99d. NO issues at all! Now i'm usind Dutty's 3,4 in general it's stable and ok, but with some minor issues. Would be really nice to have issue-free ROM based on new versions of software.