Related
Hi guys!
First of all my very atmost gratitude to all people bringing the right knowledge to this forum! It has given me a lot of ways to tweak and upgrade my MDA Pro (Universal). Thanks again. I upgraded my MDA pro in 30 minutes to the latest iMATE WWE + radio 1.04.02!!
Main benefits for me: built-in SKYPE (that works), Built-in Pocket MSN and NOT built-in, but working now: MS voice command (v1.5)
Since it took me a while collecting all relevant info for upgrading and tweaking my MDA pro, i wanted to share my experiences with you and let you know how i finally managed everything. Also because some posts contain outdated info about the upgrade process. So here we go:
UPDATE MDA PRO (NL) -> iMate Jasjar WWE + radio 1.04.02
----------------------------------------------------------------------
First of all get the right files from:
ftp://xdaupload:[email protected]/Universal
Get the files:
* JASJAR_WWE_11353_137_10301.exe
(from /Universal/Shipped%20ROM/JASJAR_WWE_11353_137_10301/)
and the file:
* UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
(from /Universal/)
- Unpack both files into a separate directory (use WINrar for both)
- Unplug universal (MDA pro) from USB
- In activesync, under connection settings, disable USB en COM connections
- Put MDA pro in bootloader by pressing LIGHT button + Power + RESET
(you can see USB vaguely on your screen, since you don't have backlight on)
- Connect MDA pro on USB; Windows will recognize new USB device
- Launch the file from the WWE update: MaUpgradeUt_noID.exe
- Preform the upgrade (this process takes about 15 to 20 minutes)
(I didnt get any country error here as some described earlier, it went smoothly)
- After it finishes, do not disconnect the MDA pro and DO NOT reset it. Immediately preform the next upgrade:
- Run MaUpgradeUt_noID.exe from the radio 1.04.02 directory
- This will take about 10-15 minutes
- After it finishes, disconnect from USB and give cold reset: POWER + reset
- You'll see the new iMATE splash screen, and then the Windows Mobile screen (first boot will take some time)
- Then the device will ask to first-setup and you're IN!
I did NOT have to install anything from the extended ROM, as others posted. The only thing i needed to do after upgrade was:
* Make new 'GPRS, 3G' connection for T-mobile, using the settings: APN: internet, user/pwd: tmobile
Then I deleted my old partnership on the ActiveSync, and activated USB and COM connections again, and synchronised my device! Et voila!!!
Then I installed my previous apps (see tip list on end of posting) and made the essential registry tweaks to my device, which can be found on:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Alrighty, hope this will bring the same smile to your face as it did on mine
Take care,
Guido
---------------------------------------
Some other tips I'd like to share:
* install Microsoft Portrait v2.3 for audio/video conferencing!! On GPRS is works better then skype for me! Audio is perfect, video connection (even at lowest settings) scrambles the audio a bit!
* Magic Button is top app!
* VNCviewer does a sweet job on the VGA screen (terminal services works fine too, but doesn't go fullscreen)
* of course Tomtom 5.1 + checkpoint 5.02 and/or POIedit
* Resco File explorer + Registry editor (must have!)
* Upgrading to Skype 1.2 beta did not work for me, stick to the default one!
Guido, execellent post!!!
---------------------------------------
Some other tips I'd like to share:
* of course Tomtom 5.1 + checkpoint 5.02 and/or POIedit
* Upgrading to Skype 1.2 beta did not work for me, stick to the default one!
Click to expand...
Click to collapse
Having a diferent build (please see below), I'm very much interested to see your tips on the above, TomTom (normal installation doesn' go...!?!) and skype (pre-installed in my JASJAR, but I haven't been able to have it working at all...!?!)
Thanks in advance.
_________________
BetoX
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER MANUAL UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE (installed manually using Total Commander)
zeg.... ik kan de bestanden niet vinden op die ftp servers.
tempelier245 said:
zeg.... ik kan de bestanden niet vinden op die ftp servers.
Click to expand...
Click to collapse
Somebody has deleted all files in the upload section, now the most of the files are reposted again(thanx), i guess, their still are missing some shipped roms.
only rom their is for now; JASJAR_WWE_11353_137_10402.rar(if it is a full rom)
So think for now that you have to browse the ftp upload part.
ftp://xdaupload:[email protected]/Universal
simlock
hi
is the simlock from t-mobile removed after you did the update?
because you also updated the radio version........
ok please help, i cant use my MDA Pro cause i have Vodafone!
Thanks in advance
ROM uploaded / reply to questions
Hi guys,
I just read that someone cleared out some files in the upload dir!
So, as we speak the uploading of the JASJAR rom update is in progress. Should be in shipped rom any moment now.
For further replying on your msgs;
- Haven't checked if the unit is simlock free now, but I think i won't be.. I'll keep you posted.
- I read somewhere that Skype needs a minimum of 18MB program memory to run correctly. Right now I managed to get 21MB free, and everything works smoothly.
- TomTom had to be installed with the 4 cabs files, since the original setup didn't work for me (crashed in installer)
And once more; I really love how MS portrait is working for audio/video conferencing. Especially since of 15-11-2005 I'm using UMTS (!) on T-Mobile NL
Looking forward to your experiences.
Take care,
Guido
thanks guido.... how are you using umts on t-mobile ???
Is it possible to put back the original mda pro rom if something goes wrong... like a registry edit.... I don't really know how everything works and I don't want to destroy my new toy !!!
Reply / Exec ROM update / UMTS / Appz / Reg tweaks
Once you upgrade you go beyond the ** Point of no-return **
But sometimes you gotta take some risks in life to advance
Actually again I took the risk yesterday of trying out the XDA Exec ROM upgrade. And I must say; this one works pretty fine for me too. And right now I gained 22,35MB free RAM memeory, so I managed to get Skype 1.2 beta running!
Furthermore I'm test using the UMTS network of T-Mobile NL. I already clocked speeds up to 320 Kbps in the downstream; pretty neat Skype and Portrait work excellent on these new speeds.
And I've tested if the upgrade unlocked the device; but.... as I've expected: no....
For now I would suggest going for the O2 Exec upgrade, also since it has the 1.04.02 radio builtin. Things I like more about this upgrade:
- More FREE program memory (allowing skype 1.2 to run for example)
- Nicer SPLASH screen
- Seems to operate a bit faster
Once you installed the Exec ROM you can choose 'Install Type' under programs; this is where you select the Corporate Mode, and then give in the code 0506. (This wasn't really described clearly for me in the other posts). Then reset. Furthermore I deleted all other O2 stuff on the device (don't forget the shortcuts under Windows\StartUp). Actually I only left sddaemon in the startup group, giving me max of working RAM.
Thus, now running:
R 1.04.02
D 1.13.48
G 42.37.P8
installed appz:
- Skype 1.2 beta
- TomTom 5.1
- MS Portrait v2.3
- MS Voice Command v1.5
- Resco File Explorer
- Resco Registry Editor
- Magic Button
- Pocket Informant 2005
- Some small utils: 'Running Programs'/'Reset'/'CloseAll'/'TrayLaunch'
- Total Commander (only for vieweing Ext Rom)
and registry tweaks: (see my first post)
- GPS
- Fonts
- Bluetooth OBEX
- data connection always on
- soft buttons changed
- MS voice command for Bluetooth headset
- Glyph cache size
- Terminal Services cache size
- Homepage hardware button change
All works deliciously
cheers,
Guido
Reply / Exec ROM update
Hi,
I just took the risk to advance, however when upgrading to the XDA Exec ROM I got the message that (after doing the hardware inspectation):
ERROR 120: Country ID Error
The ROM image that you are trying to use is not designed to work on your device.....
I have an MDA Pro.
Anyone have useful ideas?
Thanks in advance.
Greetz,
Ramoray
Re: Reply / Exec ROM update
ramoray said:
Hi,
I just took the risk to advance, however when upgrading to the XDA Exec ROM I got the message that (after doing the hardware inspectation):
ERROR 120: Country ID Error
Click to expand...
Click to collapse
I read this before in other posts. It seems that when you launch the updater the 2nd time, it doesn't produce the country error anymore
Hope this will be the same in your case!
And another important thing mentioned before; I used MaUpgradeUt_noID.exe (from the Jasjar file or Radio 1.04.02 file) to preform the upgrade. Just copy this file in the Exec directory and launch it; it will display another xda, but this is normal and will work fine for the universal
Good luck!
Cheers,
Guido
umts and simlock
Hi Guido,
thanks again for your cool posting every time! You keep us informed.
First off all pretty that the Simlock isn't removed after the update! I want to update too but first i want to remove my simlock. After that i will do an update and use my device just like i used mine Qtek 9090 before!
1 More question is about Tom Tom 5.1 when i try to install it i get an error is there an guide out there to install Tom Tom 5.1 on WM 5 ?
Ok thanks for now and keep us informed!
Surinamer!
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
upgrade MDA Pro rom
Hi Guido,
Thanks for your useful info. The MaUpgradeUt_noID.exe did the job, my T-Mobile settings are gone now.
However I didn't had the time to do the XDA upgrade yet, but will do tonight.
Anyway thanks.
Greetz,
Ramoray
Re: upgrade MDA Pro rom
ramoray said:
Thanks for your useful info. The MaUpgradeUt_noID.exe did the job, my T-Mobile settings are gone now.
However I didn't had the time to do the XDA upgrade yet, but will do tonight.
Click to expand...
Click to collapse
Congratulations! Welcome to the other side
I'm curious what you'll think about the Exec in comparison to the Jasjar.
Keep us posted.
Cheers,
Guido
Update 21/11: Video calling is supported now; call T-Mobile NL helpdesk to activate it (see my further posting for other tips)
tempelier245 said:
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
Click to expand...
Click to collapse
Will you go for the Exec or the Jasjar upgrade?
Concerning UMTS; I'm test using it on T-Mobile NL. Officially it will be launched in 2006. I'll keep you informed about the progress.
Video Calling isn't yet supported on the MDA, but the data connection is! Topping at 340 Kbps, which is pretty fast for a mobile device
Cheers,
Guido
gnuijten said:
tempelier245 said:
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
Click to expand...
Click to collapse
Will you go for the Exec or the Jasjar upgrade?
Concerning UMTS; I'm test/beta using it for T-Mobile NL. Officially it will be launched in 2006. I'll keep you informed about the progress.
Video Calling isn't yet supported on the MDA, but the data connection is! Topping at 340 Kbps, which is pretty fast for a mobile device
Cheers,
Guido
Click to expand...
Click to collapse
Hi There,
From today i noticed that I have an UMTS connection on my MDA PRO. I have flashed my MDA pro with anouther rom. UMTS is working fine. Making a videocall is not successfull. Do you have any tips to make it work or is it not supported by T-mobile
Qtek 9000 error and upgrade to imate latest firmware?
Hi,
Have been reading through all of your responses. Very impressive.
Today i received my Qtek 9000.
It seems to be a wonderful phone and with the subscriptions vodafone has in sweden i get free calls and free downloads. Looked great.
Now to my problem.
I´ve put in all settings that vodafone provides for other ppc´s and it´s working on them.
It connects, dissapears, connects again.
And i get:
Cannot Connect:
Dialed: services.vodafone.net
Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer´s documentation and try again.
I´ve downloaded these 2 files:
JASJAR_WWE_11353_137_10301.exe
UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
Will an upgrade remove my problem?
But my question is, i bought it at expansys, why buy qtek if i could have bought an iMate instead? I mean will i now rebrand it to be an imate?
Are there no software updates from qtek?
Since this one is brand new, should i return it and get an iMate instead?
I will also need to get the regfix for swedish keyboard, would be entirely greatful if it could be arranged.
Very first message from a brand new forum member!
Best regards,
Daniel Eriksson
Guido,
Is it possible for me to get acces to the umts from t-mobile.. Furthermore I'm thinking that I will install the exec rom on my mda pro. I'll receive my device tomorrow so I'll see. Do you think its a good purchase ??
Thanks
guido.... btw ik snap echt geen f*ck van dat editen van je registry.... kan je me misschien in het nederlands uitleggen wat het inhoud/betekent ?
Out today to download from here:
http://www.business.orange.co.uk/se...c=PaDPage&cid=1044130840493&mid=1044129390154
Discuss in the relevant forum here:
http://forum.xda-developers.com/viewtopic.php?p=249806
hi
whats up with the radio rom version on this update???
1.03??? thats so 2005!!!
Hi, i have an Orange M5000,
my ROM is:
ROM: 1.13.49 WWE
ROM Date: 09/20/05
Radio version: 1.03.00
Protocol version: 42.36.P8
ExtROM version: 1.13.130 WWE
do you think its worth me installing this upgrade, is the only thing it changes is the ability to use push E-mail?, whats the best radio version to have?
thanks for your help
Hi I did the update a few hours ago and I'm loving it, the only thing I don't realy like is the fact that the battery icon has moved2task bar, but its all working,plus there is no silent pause everytime I pick up a call
I have found one problem, it could just be me but im not sure what else i can do, but i cant install SPB PocketPlus 3, im lost with out this software, i think its the most usful program i have
spv-m5000
radio version i have on spv-m5000 is 1.09
if any one wants it ill send them
its to process :
1 fromn 1.03 to 1.06
then 1.06 to 1.09
about 70 mb.
rgds
Re: spv-m5000
motin said:
1 fromn 1.03 to 1.06
then 1.06 to 1.09
Click to expand...
Click to collapse
Why would you need both?! you can go straight from 1.03 to 1.09!
and it's on the ftp...
radio upgrade
gd luck if u can do it
on my spv-m5000
i could not do it and hed to do 1 by one.
Hi, lastnight i upgraded my radio from .03 to .09 and it worked perfectly, as normal i had to make sure the phone was in bootloader mode to make t work, i got the files from this sites FTP server, XDA-Developers site is all you need!
Thank you to everybody that gives there views and advice freely!
P.S i got Pocket plus to install after i did another hard reset, phewwww
Don't want to sound stupid but ...
.. is upgrading your ROM an easy thing to do for a non teckie ?
Do you need to hard reset etc etc. ?
Is there a guide out there ?
Don't wanna take the plunge and mess things up. I've got loads of software and tweaks on my SPVM5000 - will Sprite Back up re-install with a new ROM. I'm also on 1.13.49 same as jab1a.
Hello All,
If i replace my xda exec rom to orange rom, it will be locked?
Another question, where can i get the radio rom 1.09 to flash the orange rom?
Thank you,
racerx
Hi Rick GM,
the ROM upgrade is pritty easy and the Radio update is aswell, everything you need to know or might not need to know about the update is in the WiKi and forum. its real easy.
As for backups, im not sure how this works but for good measure before i did the upgrade i did a FULL backup, then i did a non-rom backup (i.e i just backed-up the things i had installed on the m5000) then i did a PIM and message backup (note: i only ever have problems with a restore when i decide to restore the messages databases so unless you realy need to i would only backup the PIM(contacts) database). I think if you tryed to do a full backup and then do the upgrade and then restore the full backup you might run into a few errors or incompatability. it only takes about 30mins to do the update and about another 20mins to re-install all your software and then the rest of your life to get all the setting you want just right! lol
I am sure you will do fine, after all this is the best site in the world for PPC so im sure someone here would be able to help you if it all goes pear shaped
Moved thread from news section
Thanks for that jab 1a
I haven't taken the plunge yet but it's coming !
I think your 20 minutes to re-instal software is a bit optimistic even if all goes well. I reckon it will take me an hour plus to sort out all the cr*p that I've got on my device. (I keep a copy of everything but some's on my home PC and some at work).
I'll update you when I finally pluck up courage / find the time.
BTW - I'm only going to do it because you can. Isn't that what these devices are all about ?
Rick GM said:
BTW - I'm only going to do it because you can. Isn't that what these devices are all about ?
Click to expand...
Click to collapse
Ahh thats the spirit!
yep looking at it now i think it would take more than 20mins
let us know how you get on when you do it
jab1a wote
let us know how you get on when you do it
Click to expand...
Click to collapse
Well I upgraded with the ROM from the Orange site (1.30.90) - no problem. That's good news.
Sprite Backup V5.1 is newly released this week and boasts cross ROM/Device backup capability after capturing your old ROM in .sbu file immediately after hard reset and prior to ROM upgrade.
It hasn't worked - it won't recognise my .sbu file (Invalid Upgrade File) or words to that effect so it looks like a slog to put everything back on (unless Sprite can restore (no pun intended) my faith in them and come up with an answer. Might have a go at the Radio Rom next.
I have the new ROM from Qtek into my Universal. Is it worth the upgrade to this new Orange ROM?
best regards,
Deiota
Rick GM said:
jab1a wote
let us know how you get on when you do it
Click to expand...
Click to collapse
Well I upgraded with the ROM from the Orange site (1.30.90) - no problem. That's good news.
Sprite Backup V5.1 is newly released this week and boasts cross ROM/Device backup capability after capturing your old ROM in .sbu file immediately after hard reset and prior to ROM upgrade.
It hasn't worked - it won't recognise my .sbu file (Invalid Upgrade File) or words to that effect so it looks like a slog to put everything back on (unless Sprite can restore (no pun intended) my faith in them and come up with an answer. Might have a go at the Radio Rom next.
Click to expand...
Click to collapse
Sprite really screwed up here.
When they released 5.1, they re-introduced their killer rom upgrade proof restore feature. It even works for the new self-extracting restores. How cool is that?
Now, today, I had to have my SPV M5000 replaced (same model) because of a screen problem, and knew the replacement would be AKU2, so I purchased Sprite 5.1 to back up with. I looked around all the different pages I could find showing how to use Device Upgrade Mode. All had links to the same GetUpgradeData.exe. So, even though I had that nagging developers' intuition that this must be wrong, I assumed it was the right version. I only had twelve hours to puchase, get the file down, and do all the backup stuff.
Then I exchanged devices with the courier. (Orange care is great (mostly!)). However, when I tried to restore, what a surprise: "Invalid Upgrade File". Checked back on Sprite Site - ONE page out of the five or six links to GetUpgradeData2005.exe. Howl !!!! :x
Can someone please post an UpgradeData.sbu, from a clean vanilla Pre-AKU2 M5000, dumped with the new GetUpgradeData2005.exe, otherwise someone at Sprite is just gonna have to die. Lots.
Many, Many thank yous in advance!
Update: Sprite have kindly offerred to provide an sbu for 1.13.53 WWE.
Unfortunately, as best as I can remember, mine Rom was 1.13.49 WWE.
Can anyone please tell me of an identifying characterstic by which I dould have distinguished the two versions (bearing in mind - I don't have the device any more), or even better an upgrade file (sbu) for 1.13.49 WWE?
Mutant
I too used the GetUpgradeData.exe as advised by Sprite. After registering my problem they advised me to use the GetUpgradeData2005.exe and sent me a copy. Unfortunately I'd already upgraded the ROM so didn't have the .sbu pre upgrade. I've since got a clean 1.13.49 from a colleagues Orange SPV M5000 but the backup still didn't work. Sprite recognised the .sbu but just messed up the device (after partially restoring) requiring several hard resets. If you want the .sbu, I think I've got it stored somewhere. Let me know.
I've read through the WWE thread and still haven't managed to find people's experiences with this ROM and their UK Orbit's.
Can people please post any issues, and more importantly if I'll brick my Orbit (as from the shop so unsure whether CID locked / unlocked) if I follow the steps in the original thread?
Thanks.
I had no luck. I'm waiting for WM6 ROM from O2 UK to get the phone working again as I can still access the bootloader.
Same for me. Followed all the steps, but still my phone bricked. Mine was CID locked, but because there were several succesful upgrades on CID locked devices I also tried it. I'm also still able to enter bootlloader, so just have to wait for retail WM6 ( have no RUU signed update to restore my device )
I moved from a Orbit with a HTC P3300 Rom (CID Unlocked) to a WM6 Bebe Rom at the first attempt.
It's so much quicker than the WM5 Rom. It's a lot more stable.
If you want me to post the steps and a Apps I've tested I'll do so tomorrow.
I couldn't get Bepe's to load with the boot loader, but the next part with the windows.nb file worked..........
Sort of, I think the bluetooth is not working properly as I can't create a port to allow me to sync with my pc. Apart from that it is working fine. (Touch wood)
doesn't seem worth the risk...
sounds to me like it isn't worth trying at the moment then! shame cause i want to get wm6 running but would rather not have a bricked device ... and the odds look high!
come on o2... where's our official rom?
I've just upgraded my O2 Orbit and it worked fine. CID unlocked it with IMEI-Check and then followed Bepe's instructions.
mmmm... fair enough but i just don't wanna shell out $20 to get a cracked rom...
If I am not mistaken is it not £20 as opposed to dollars I would pay a tenner but like you I will wait for £20
Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?
itschase said:
Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?
Click to expand...
Click to collapse
probably, they will require you to give this to prove you have a HTC branded device. TBH they shoudl provide a ROMforAll no matter what provider you have you should be able to upgrade to a clean manufacture rom.
for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.
phsnake said:
for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.
Click to expand...
Click to collapse
Do you think the same would apply if you Hex edited ARTE10000 to ARTE2000? Sily question, I know, but is that the only level of security that actually looks for model ID?
in o2 ger image its already ARTE***** so u dont need to change anything (it means it shoul work for arte100,110,1000,200 models maybe 300 as well - htc love) But this is looking only for ModelID, in ROmUpdate Util it checks somehow for ModelVendor/Operator - addr:x0003BA6C - password BsaD5SeoA
I also "BRICKED" my Orbit. I am also the impatient type. Why wait for O2 to release a ROM image? I have spoken with O2 directly. My friend even works for their technical division. As far as I have been able to find out, from friends and his friends at O2, there is NO O2-UK WM6 in the pipeline at the moment. Not enough users apparently. When I found out this I put my Orbit into O2 shop for repair. It was flashed under warranty as a software fault. I have since CID-unlocked it and flashed to WM6.
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.
Shand359 said:
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.
Click to expand...
Click to collapse
My experience: O2 Orbit bought in CZ. My way was: CID unlock -> try-and-brick (...) -> German original O2 WM6 ROM (with bootloader) -> Arte WM6 from bepe.
I am very happy now (extremly stable!) and at this moment I do not plan even upgrade to a new ROM.
Btw solved the issue with localization (keyboard only - Resco works perfectly) and external keyboard support for my beloved iGo Sierra bluetooth keyboard: AE Keyboard mapping SW solved my needs
MY experiences
Being a corporate O2 customer, when I bricked my Orbit they sent me a new one and said I could do what I wanted with the old one.. it's still a brick, having tried every suggestion on this forum!!!
MY new one, however, is running Bepe's WM6, having run the USPL first.
I tried Black&Blue, but found it drained the battery too quickly, and I reall ydon't need all the extras it comes with. I've got Bepe's WM6 running brillianlty - all I add is a cracked version of TomTom 6.02, which runs perfectly, BatteryStatus purely for a power display, no overclocking needed, and TodayAgenda for improved calendar on Today.
I use push mail to connect to my office exchange server, and have all my personal mail ending up at fastmail.net, where I connect to using IMAP - deleting from the phone deletes properly on the IMAP server now, unlike on WM5, so you really can have a synchronised mailbox usin IMAP and a free account at Fastmail.net...
I also have JetwareMobile installed to enable me to use my Siemens HKW600 Car kit (£40 on ebay, superb!), and I have some Sony DR-BT30Q bluetooth headphones which work perfectly...
I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!
jamin100 said:
I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!
Click to expand...
Click to collapse
Yes, but that doesn't work if you've already bricked your Orbit
Does anyone happen to have a WM5 ROM to restore to if the WM6 goes horribly tits up - I'm not overly looking forward to the idea of not having the pride of the mobile fleet working... the humiliation!
Hi all
I've taken a good long read throughout this Upgrade to WM6 subforum, I like the idea of it a lot and want to go ahead and do it, but having never re-flashed a PDA Phone before (I've done my PSP lots of times tho but thats easy in relation) I think its very difficult to find anywhere to even begin from!
Can anybody just give me a total-overall-topdown-summary-breakdown of the steps I need to perform on a fresh T-Mobile MDA Vario II. Doesn't have to be in detail, just all the basic steps required.
The forums, whilst being great for regulars seems to just confuse me the more I read them because of all the new issues raised and the individual cases on different vendor models of the Hermes.
My phone isnt a new Vario II, but I've done nothing to it except install apps, and it is showing REALLY old bootloader (I think 1.04) and radio versions (cant remember) in the system information. I'm presuming it'll require a radio upgrade at the least.
I would really appreciate a summary of everything and I think all newbies would benefit a lot.
Specific areas of confusion and concern -
-I would like to be able to grab the existing memory contents as an image off the phone just in case I choose to return to WM5 in future, and have a way of easily restoring it with no fuss. Exactly like ghosting a PC will return the whole OS, and all files and apps. Any recommendations how?
-I cant choose which custom third party WM6 ROM to use or just use HTCs official one if I should.
-I dont know if I'll still be able to use TomTom Navigator and some games plus I'm running TCPMP with the YouTube FlashVideoBundle. Will this still work?
-Should I upgrade the radio and bootloader before thinking about moving to WM6? Is there any other areas I should be flashing/rejigging before upgrading? Eg whats this about the ExtRom and gaining more space (obviously good)?
-The vendor lock on the firmware concerns me. Is there one on the UK T-Mobile MDA Vario II? Also about what I read somewhere about how disabling the lock with one of your tools might brick the phone (or am I getting confused somewhere along the line).
-As the community moves on with further developments, the divide between n00bism (me) and l33t (you) increases - case in point - kitchens??? I'm not saying though that it shouldn't happen!
Many thanks for everybodys work.
Stu
I'm basing my comments on Vp3G's ROM,
Begin by reading over
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=65&Itemid=26
(1) MUST DO: Download and install SPL (Bootloader) version 2.10.Olipro (HardSPL v7)
(2) Optional: Download and install an updated Radio. I'm using 1.54.07.00
http://forum.xda-developers.com/showthread.php?t=334697
Pick out a ROM and download it. I'm currently running vp3G's
ROM version: VP3G's v3.62
http://forum.xda-developers.com/showthread.php?t=334946
Install the ROM.
Study your phone, read, study your phone, read. Very soon, all of this will become second nature to you.
Heliosphan said:
Specific areas of confusion and concern -
(1) I would like to be able to grab the existing memory contents as an image off the phone just in case I choose to return to WM5 in future, and have a way of easily restoring it with no fuss. Exactly like ghosting a PC will return the whole OS, and all files and apps. Any recommendations how?
(2) I cant choose which custom third party WM6 ROM to use or just use HTCs official one if I should.
(3) I dont know if I'll still be able to use TomTom Navigator and some games plus I'm running TCPMP with the YouTube FlashVideoBundle. Will this still work?
(4) Should I upgrade the radio and bootloader before thinking about moving to WM6? Is there any other areas I should be flashing/rejigging before upgrading? Eg whats this about the ExtRom and gaining more space (obviously good)?
(5) The vendor lock on the firmware concerns me. Is there one on the UK T-Mobile MDA Vario II? Also about what I read somewhere about how disabling the lock with one of your tools might brick the phone (or am I getting confused somewhere along the line).
(6) As the community moves on with further developments, the divide between n00bism (me) and l33t (you) increases - case in point - kitchens??? I'm not saying though that it shouldn't happen!
(7) Many thanks for everybodys work.
Click to expand...
Click to collapse
(1) No idea, but why would you want to return to WM5. Once you have WM6, you'll never go back. I'm sure there is probably a WM5 somewhere.
(2) I use http://forum.xda-developers.com/showthread.php?t=334946
(3) Hit and miss. But probably.
(4) Upgrade the boot loader. Radio is optional, but I recommend it to.
(5) News to me
(6) Welcome to the world of custom, "free", ROMS. You like it or you don't. Download, support and enjoy, or move on
(7) You're Welcome
gwtx2 said:
I'm basing my comments on Vp3G's ROM,
Begin by reading over
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=65&Itemid=26
(1) MUST DO: Download and install SPL (Bootloader) version 2.10.Olipro (HardSPL v7)
(2) Optional: Download and install an updated Radio. I'm using 1.54.07.00
http://forum.xda-developers.com/showthread.php?t=334697
Pick out a ROM and download it. I'm currently running vp3G's
ROM version: VP3G's v3.62
http://forum.xda-developers.com/showthread.php?t=334946
Install the ROM.
Study your phone, read, study your phone, read. Very soon, all of this will become second nature to you.
Click to expand...
Click to collapse
That's basically what I just did last night after getting my 8525. I did the unlock before the above tho.
pretty easy and quick.
now I need a keyboard skin that is grey... schap's version (I think it was his) does not work for me dunno why.
Wow!
Thanks guys that was lightning quick!
I'll take a proper ganders at your responses tomorrow.
Thanks
Stu
ikkoku said:
That's basically what I just did last night after getting my 8525. I did the unlock before the above tho.
pretty easy and quick.
now I need a keyboard skin that is grey... schap's version (I think it was his) does not work for me dunno why.
Click to expand...
Click to collapse
go to programs\advanced config (or system tools, cant remember)
Find advancedconfiguration options, go to keyboard, then select Cingular out of the list
I had to do the same thing on schaps with my 8525
heheheh...this is post # 69 for me!
intrglctcrevfnk said:
go to programs\advanced config (or system tools, cant remember)
Find advancedconfiguration options, go to keyboard, then select Cingular out of the list
I had to do the same thing on schaps with my 8525
heheheh...this is post # 69 for me!
Click to expand...
Click to collapse
are you talking about system tools\ htc custom?
it's already on Cingular
Also, anyone know how to get rid/change the second startup screen (Blue and Green with Windows Mobile)
Whoa, subject hijack...
...oh well, not to worry.
Anyway, in response to gwtx2, I might want to go back because some little thing I need might not work, and I might require some T-Mobile support, I'm sure they'll not touch a phone thats been reflashed with unofficial fw.
Also T-Mobile might release an official WM6 Hermes upgrade too.
Besides, have you never heard of this 'take backups = a good thing' thing?
Besides, it must be relatively easy, how else would all these custom hermes firmwares be built from?
How do these guys do it?
Thx
Stu
sorry .. didn't mean to hijack
Upgrade process.
gwtx2 et al.
Many thanks for pointing me towards MrVanx's Hermes Guide site.
Are you sure its fine to be using the VP3G firmware for my phone given it was derived from and is in general use with a US model AT&T 8525 (A hermes 100)?
My phone is a UK model T-Mobile MDA Vario II (A hermes 300)? Thats three differences I see (Country, operator firmware, hardware revision)!
Although MrVanx guide says the Vario II is suitable on the first page, I'm thinking its worth going for a different ROM derived from the Vario II for luck.
If I choose to go with another that was derived from the HTC official one, I'm presuming the general instructions are the same then?
eg.
#1 take down settings and xfer files.
#2 reflash HardSPL bootloader
#3 reflash radio version
#4 reflash ROM.
#5 restore settings & apps.
Am I right?
Many thanks again.
Done some stuff!
Hi all again.
Right, I've been perhaps too brave for my own good, but it turned out well!
I've installed HardSPL 2.10.Olipro on my phone, plus I've gone the whole hog and picked a very up to date radio version 1.54.00.10, I think it was originally ripped from a french firmware, I figured a Euro fw would be best suited for my UK model Hermes.
I was right I think - I now see a good fast T-Mobile home webpage, and sites load pretty good once it finds it. I also tried YouTube on TCPMP player, that seems quicker but I couldn't be totally sure.
One point I should note - When running the RUUWrapper app, AutoDetect flashed up a YES NO question on the PDA screen to accept running the program. Problem is I didn't catch it in time, so instead it threw up an autodetect error. Now after closing RUUWrapper and re-running it, it never throws up the YES NO question any more in any radio flasher (even after rebooting the PDA and the PC)! Instead I had to choose the HardSPL tickbox and the SPL 2.02/2.10 fourth option down, to continue. Slightly concerning but it worked.
Now all I need to do is up to a WM6 firmware when I choose one, it's gone well so far so my luck is bound to change!
QUESTION PLEASE-
Does anybody know the T-Mobile UK 3G Cellular Line access point password? I know the username but would need to fill in the pwd. The username is t-mobile but the pwd is ****** and wont copy paste of course! Its in the bit where you see the access point address - general.t-mobile.uk.
Many thanks to all for helping me this far.
Stu
Heliosphan said:
gwtx2 et al.
Many thanks for pointing me towards MrVanx's Hermes Guide site.
Are you sure its fine to be using the VP3G firmware for my phone given it was derived from and is in general use with a US model AT&T 8525 (A hermes 100)?
My phone is a UK model T-Mobile MDA Vario II (A hermes 300)? Thats three differences I see (Country, operator firmware, hardware revision)!
Although MrVanx guide says the Vario II is suitable on the first page, I'm thinking its worth going for a different ROM derived from the Vario II for luck.
If I choose to go with another that was derived from the HTC official one, I'm presuming the general instructions are the same then?
eg.
#1 take down settings and xfer files.
#2 reflash HardSPL bootloader
#3 reflash radio version
#4 reflash ROM.
#5 restore settings & apps.
Am I right?
Many thanks again.
Click to expand...
Click to collapse
The general answer to the first part is it doesn't really matter which provider gave you your Hermes as long as it is one. (Actually, there are some differences between Hermes models but honestly don't worry about that for now.)
Don't worry about going for a ROM that's derived from T-Mob. Basically, all the different network providers get given the latest working versions of Windows Mobile from time to time for them to either check and have a play with or to customise and release as an upgrade or in the newest issues of their phones (or as a download for current users).
My Hermes is Orange UK (i.e. SPV M3100) but I've ended up at various times having WM6 versions derived rom AT&T, T-MOb, HTC et al. The only thing that matters is that it's Windows Mobile for the Hermes.
As to going back to WM5, I think it's worth having the original ROM about. If you search around the Hermes Wiki (I'd do it but it's late and I honestly can't be bothered, soz!) you'll find a list of original ROMs available for download. Note your current version and go download it so it's there ready for you to pit back on should you ever want to. (Warranty-claim time can be a good time for that.)
I'd suggest the following as a routine, myself:
1. Note down any details you might need later such as ROM version etc. Anything that comes up briefly after soft-reset or in Device Info and About in settings and any network setting for acessing GPRS or 3G etc.
2. Download the OliPro bootloader and install. The reason for this is to protect yourself as much as possible against problems.*
3. Have a gander at all the current cooked ROMs. I'd advise initially going for a lightish version as you can always add to it with cab files for your preferred extra bits.
4. Don't go for the Kitchens yet. It's best to mess with installing ROMs before trying to make one. The people eho run the kitchen threads, and the people who wrote the tools they use, have all worked very hard on making it possible for people who don't know much to make their own version of WM6 easily. It's easy but do it later.
5. Radio is absolutely optional and in most cases not very unnecessary. Like everyone else, I always want the latest of everything just in case there's a tiny, incremental improvement but if you have no problems with reception or internet access then worry about that last, if ever. Not every radio version is 'better' than the previous. The most recent version always has the highest version number obviously, but new versions are often brought out to deal with issues in a particular geographical area (usually country-specific AND network-specific, though it may or may not be better for other users elsewhere). The latest version of radio may be better for you but it might be worse and it might stop your internet of wifi working or something. Leave it for now if you have no issues with any kind of radio-related functions.
6. Installing your apps and settings is obviously something you'll do when the phone itself is done.
*There is another BRILLIANT touch to make sure you're extra super-safe and it's particularly easy: follow this link: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing . Basically, if you keep a copy of the a ROM image (renamed to HERIMG.nbh) on your microSD card (check the wiki item for specifics) then you can flash your phone at the touch of a button (well, two butons) from there in an emergency. even if your house loses ekectrical power during the flashing process whilst it's connectedto your PC and your Hermes won't even THINK of booting with half an OS flashed to it, you can very nearly always restore the ROM by flashing from the card.
It's all dead simple one you get into it, it's just a tad worrying before you start to take a scalpel to a new toy you just paid good money for.
You'll be fine mate.
Aha! Your success story must've appeared whilst I was busy typing!
Nice one. Ah well!
WOOOHOOO! I'm on WM6!!!
Many thanks chunkymunky for all your comments, its nice to know some fellow brits are on here too. Which phone do you have?
Its also nice to know that any hermes ROM will work on my phone, and I'm definitely going to have a go at this SD card reflash at some point now I'm gaining confidence in reflashing. Having said that, I have an old HTC Blue Angel (Orange SPV something) and that used to occasionally crash and do a full hard reset, erasing everything. My hermes has never done that so SD reflashing could be moot.
As it goes I'd like to share my experiences - late last night I flashed my Vario II with Fun_Keys 1.5.2 thats based on the 3.62 WM6 ROM. It reflashed fine, and I am utterly over the moon!!!! My phone has been reborn into something far better, faster in lots of areas. T-Mobile UK be damned for not releasing an official WM6 upgrade (yet) because WM6 is noticeably faster, looks really great with the shiny black theme. etc etc etc.
And because of all the work the ROM authors have done, I now get full on HSDPA access on my phone, I get the H icon on the top bar and everything! I know the H Icon being present now doesnt mean that I didn't get HSDPA before on my original WM5 firmware, but I'm pretty sure it is muchos faster.
Besides, a while back, a guy on T-Mobile UK tech support said I'd only get HSDPA when using my phone as a modem for a laptop, not via PocketIE on the phone itself. That made me feel I'd been a bit ripped off.
Oh and TCPMP with FlashVideoBundle works fine too and the phone downs YT Videos really quickly. I don't even have a serious problem with the ATI Imageon stuffs.
I'd like to mention that after a good while using radio versio 1.54.00.10 that it works fantastically on a UK T-Mobile MDA Vario II. HSDPA access included. Not unexpected since it was on 1.05.05.00!!!
Also TomTom works fine with two different bluetooth GPS receivers I have. WM6 has granted me access to the 'External GPS' option in the control panel I was missing originally (bloody operator firmware!) - as a result Google Maps can now use my GPS too!!!
As a techie by profession, I'm also loving all the extra tools Fun_Keys put on, like the advanced configuration tool, the task manager, regedit etc.
Countless other advantages I've gained has basically brought my phone a new lease of life, now I definitely dont plan to upgrade to a newer phone any time soon.
Who would have thought such a simple thing would bring such happiness!
The only disappointment was with having to up to ActiveSync 4.5 which killed my partnerships! No biggie, and nothing to do with WM6.
a big Thank You to the XDA Developers forum in general for your tireless efforts.
Stu
every time i tried to update the rom or radio i've got the
260 error...why is that?...i have a htc mda basic t-mobile...and its sim locked to austria....can somebody tell me how to unlock it?
Hi all....
1st.. dont flash any full stock ROM cause it includes SPL and radio those (most important radio) are the first thing to brick a device...
2nd.. many times i flash back to wm6 just to test the performance, is ok but you must to stripp the stock rom and guess what?... is hard... so i suggest if you all want to go back to wm6 use the stripped att stock rom
Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.
Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...
Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.
Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now
Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.
spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...
---edit---
please delete this post
have fun with your spv
I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!
I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..
Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.
Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt
http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.