Bepe's WWE WM6 on Orbit - P3300, MDA Compact III ROM Development

I've read through the WWE thread and still haven't managed to find people's experiences with this ROM and their UK Orbit's.
Can people please post any issues, and more importantly if I'll brick my Orbit (as from the shop so unsure whether CID locked / unlocked) if I follow the steps in the original thread?
Thanks.

I had no luck. I'm waiting for WM6 ROM from O2 UK to get the phone working again as I can still access the bootloader.

Same for me. Followed all the steps, but still my phone bricked. Mine was CID locked, but because there were several succesful upgrades on CID locked devices I also tried it. I'm also still able to enter bootlloader, so just have to wait for retail WM6 ( have no RUU signed update to restore my device )

I moved from a Orbit with a HTC P3300 Rom (CID Unlocked) to a WM6 Bebe Rom at the first attempt.
It's so much quicker than the WM5 Rom. It's a lot more stable.
If you want me to post the steps and a Apps I've tested I'll do so tomorrow.

I couldn't get Bepe's to load with the boot loader, but the next part with the windows.nb file worked..........
Sort of, I think the bluetooth is not working properly as I can't create a port to allow me to sync with my pc. Apart from that it is working fine. (Touch wood)

doesn't seem worth the risk...
sounds to me like it isn't worth trying at the moment then! shame cause i want to get wm6 running but would rather not have a bricked device ... and the odds look high!
come on o2... where's our official rom?

I've just upgraded my O2 Orbit and it worked fine. CID unlocked it with IMEI-Check and then followed Bepe's instructions.

mmmm... fair enough but i just don't wanna shell out $20 to get a cracked rom...

If I am not mistaken is it not £20 as opposed to dollars I would pay a tenner but like you I will wait for £20

Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?

itschase said:
Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?
Click to expand...
Click to collapse
probably, they will require you to give this to prove you have a HTC branded device. TBH they shoudl provide a ROMforAll no matter what provider you have you should be able to upgrade to a clean manufacture rom.

for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.

phsnake said:
for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.
Click to expand...
Click to collapse
Do you think the same would apply if you Hex edited ARTE10000 to ARTE2000? Sily question, I know, but is that the only level of security that actually looks for model ID?

in o2 ger image its already ARTE***** so u dont need to change anything (it means it shoul work for arte100,110,1000,200 models maybe 300 as well - htc love) But this is looking only for ModelID, in ROmUpdate Util it checks somehow for ModelVendor/Operator - addr:x0003BA6C - password BsaD5SeoA

I also "BRICKED" my Orbit. I am also the impatient type. Why wait for O2 to release a ROM image? I have spoken with O2 directly. My friend even works for their technical division. As far as I have been able to find out, from friends and his friends at O2, there is NO O2-UK WM6 in the pipeline at the moment. Not enough users apparently. When I found out this I put my Orbit into O2 shop for repair. It was flashed under warranty as a software fault. I have since CID-unlocked it and flashed to WM6.
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.

Shand359 said:
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.
Click to expand...
Click to collapse
My experience: O2 Orbit bought in CZ. My way was: CID unlock -> try-and-brick (...) -> German original O2 WM6 ROM (with bootloader) -> Arte WM6 from bepe.
I am very happy now (extremly stable!) and at this moment I do not plan even upgrade to a new ROM.
Btw solved the issue with localization (keyboard only - Resco works perfectly) and external keyboard support for my beloved iGo Sierra bluetooth keyboard: AE Keyboard mapping SW solved my needs

MY experiences
Being a corporate O2 customer, when I bricked my Orbit they sent me a new one and said I could do what I wanted with the old one.. it's still a brick, having tried every suggestion on this forum!!!
MY new one, however, is running Bepe's WM6, having run the USPL first.
I tried Black&Blue, but found it drained the battery too quickly, and I reall ydon't need all the extras it comes with. I've got Bepe's WM6 running brillianlty - all I add is a cracked version of TomTom 6.02, which runs perfectly, BatteryStatus purely for a power display, no overclocking needed, and TodayAgenda for improved calendar on Today.
I use push mail to connect to my office exchange server, and have all my personal mail ending up at fastmail.net, where I connect to using IMAP - deleting from the phone deletes properly on the IMAP server now, unlike on WM5, so you really can have a synchronised mailbox usin IMAP and a free account at Fastmail.net...
I also have JetwareMobile installed to enable me to use my Siemens HKW600 Car kit (£40 on ebay, superb!), and I have some Sony DR-BT30Q bluetooth headphones which work perfectly...

I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!

jamin100 said:
I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!
Click to expand...
Click to collapse
Yes, but that doesn't work if you've already bricked your Orbit

Does anyone happen to have a WM5 ROM to restore to if the WM6 goes horribly tits up - I'm not overly looking forward to the idea of not having the pride of the mobile fleet working... the humiliation!

Related

M1000 ROM

I'm trying to upgrade my o2 XDA II to an M1000 ROM because I want to se eif it's any better than the O2 one,
Does anyone know where I can get it from? I've searched the forum for hours and have only managed to find a few zip files with the contents of the extended ROM in them.
The differences between operators is what is supplied in the Extended ROM. For example, version 1.72 of the OS is the same on all devices as is version 1.17 of Radio - Unless, of course they are in a different language.
The Extended ROM allows operators to add their own customizations, additional applications and, in some cases, their own fixes.
Hello again,
Hello there, I was under the impression that in the O2 ROM, changes have been made to some of the operating system dll files that control handsfree.
I have a problem getting mp3 audio out of the device when it is in car kit mode and from research on the site, i-Mate and Orange phone owners don't have this problem.
One suggestion was that the handsfree dll had been changed and so I was trying to get a copy of the Orange (UK) Rom as packaged by Orange. (I assume that they do an upgrade file in a similar way to O2.)
I have a copy of the custom 1.72 Orange ROM that ninjadonkey created. It's been pre configured to Orange UK, and its unofficial as Orange are useless at providing decent upgrades! It will be exactly the same as the new O2 upgrade without all the cool extra software (Fonix etc...) that you get from o2 so you're probably best off with what you've got mate!
Ok,
I notice that you have Tom Tom on your device, does that mean you have an in-car kit with it?
If so, can you hear Tom Tom messages through the Kit or does the device insist on playing through device speaker only?
Also, can anyone advise me on how to customise the Windows install in ROM so that the folders are set up as I like them (As with the XDA-Developers SER).
Cheers again.
No, unfortunately TomTom only comes through the device speaker.
grrrrrr! Bloody fiddlers developing in problems!
findus said:
I have a copy of the custom 1.72 Orange ROM that ninjadonkey created. It's been pre configured to Orange UK, and its unofficial as Orange are useless at providing decent upgrades! It will be exactly the same as the new O2 upgrade without all the cool extra software (Fonix etc...) that you get from o2 so you're probably best off with what you've got mate!
Click to expand...
Click to collapse
Can a copy of the custom 1.72 Orange ROM be downloaded from anywhere?
Perhaps it will help with some of the problems I am having with my M1000.
Thanks.
Here you go...
Enjoy at your own risk - works great for me though. This is an unofficial ROM customised for Orange UK by ninjadonkey. You will have issues with country code errors if you choose to upgrade again unless you follow the instructions in dcs's post on country code errors.
Fin

1.40 ROM for XDAIIs

Does anybody have a copy that I can have which involves not messing with and that I can flash to my XDAIIs with no country error and no o2 stuff on it so it looks like the i-mate :?:
erm...................no
1.read the wiki
2.read the wiki
3.read the wiki
if above dosnt work try contacting your doctor about your brain......
lol, yeah, please read the wiki, you cannot go wrong, just follow the simple instructions, dont worry, you WILL be fine, if you get a country error then dont worry about that either, just keep trying, 8)
we have faith in you man!!!
8)
Dude do what this say's.
I've just done it: UK XDA IIs, on Orange network, running i-mate 1.40 ROM.
Slightly going OT...
I am quite keen to do the upgrade from my standard O2 XDA2s 1.31.00 WWE ROM, but I am a little unsure on what 1.40 ROM to download from WIKI. I think I need:
i-mate 1.40.176
I know my device is a Blue Angel, Rom as above, extended ROM as 1.31.139 WWE
Can anyone confirm the correct download please?
Also, has anyone had any problems installing on XDA's the same as mine?
I have read the install tutorial, but would like to get an idea of if I am going to run into problems.
Oh, one more thing... What advantage does ROM 1.40 have over my existing ROM apart from bug fixes (oh please! daily lockups!!!)?
Many, many thanks.
O2 XDAIIs Upgrade
I used the i-mate 1.40.176 upgrade for my O2 XDAIIs. All in all its pretty stable, with only the Bluetooth stability (memory issues and BT Manager & Settings "disappearing") as the main issue. Much better than the O2 1.31 ROM (will they ever get that 1.40 update out...!?) You will need to use the "MAUpgrade" rather than "BAUpgrade" utility, as the 1.40.176 ROM was built for the i-mate rather than the xda2s.
One problem I did have with this ROM at the start, was that GPRS would not stay connected. This seems to be a sporadic problem among those that upgrade, but if you experience it after upgrading to this ROM, you can correct the problem by replacing the "CallerID" cab in the extended ROM with the older version (1.17) This version of the file is available on wiki also. This will involved unhiding and unlocking the Extended ROM and replacing the file. Look at the wiki instructions under Blue Angel for "Cooking Your First Extended ROM" That said, you may not experience this problem, so upgrade the ROM first and see how it goes.
All in all a much better ROM. I am trying the new O2 Asia WWE ROM with a modified extended ROM and this is also pretty good. Slighty better Wi Fi switch on and off in my opinion. This one is on wiki also, but you will probably need to "cook" the extended ROM here a bit more than the 1.40.176 version.
Hope this helps
Chris
Anybody tried the imate 1.40 rom on O2 XDA IIs purchased from Singapore?
I am facing problems to using any 'Today Plug-ins' like IP Dashboard, O2 Plus beta, Lexisgoo English dictionary etc. The problem is after say 30 minutes or after more, my keyboard input will only be selectable, cannot select CE-Star chinese keyboard or Intellipad.
What do I have on my O2 XDA IIs?
1. CE-Star
2. Intellipad and Intellidialler
3. Lexisgoo English dictionary
4. SKTools
5. Sprite backup standard
6. Cal89A calculator
7. MDict 1.21
and many more.
Please help anyone.
Thanks.
my exerience with this device and all the ROMS has been that the fewer Today plugins you have the better. SPB Pocket Plus V2.5 caused a lot of lock ups. Not sure about new version 3.0 Seems multiple Today plug ins cause conflicts. Hard to pinpoint all the interactions and what affects what... Not much help I am afraid :-[ I would just try to keep them to a minimum.
Regards
chris
You said it man!
I'm down to zero 'Today Plug-ins' now and it seems to keep my IIs from needing to 'soft reset'.
Any others from Singapore who had used the Imate 1.40 rom?
Two major problems that I am facing with 1.40 ROM include:
1. wifi can't be connected after disconnecting GPRS.
2. bluetooth problem (memory error) or storage card disappear after disconnecting BT.
Anybody experience these?
Cheers,
zard said:
You said it man!
I'm down to zero 'Today Plug-ins' now and it seems to keep my IIs from needing to 'soft reset'.
Any others from Singapore who had used the Imate 1.40 rom?
Click to expand...
Click to collapse
Me !!
I had used the Imate rom before but, there has been many casses of terrible lag. When i updated to 1.40 and radio to 1.13 wooo... just very very fast...
Installing the latest Pocketplus with my 1.40 ROM makes my device hard-reset itself.
I need a way of getting IE to be able to save pictures. Anyone know of an alternative way to do this?
I have no problem with pocketplus 3.0.
Which version you are using?
1.40 ROM has serius today screen problems with me too (That's why I still use 1.31).
I have no problem with pocketplus 3.0.
Which version you are using?
Click to expand...
Click to collapse
My ROM configuration is in my sig.
The SPB pocketplus version is: v3.0.0.3652
I really want the mods it offers. (particularly 'save picture as' in IE).

anyone tried this with uk t-mob mda compact iii

heading says it all really - i'm cid locked btw.
cheers
si
Yes, thanks to This thread.
Worth noting again, that first time around under Vista did not work, I had to dig out an XP based PC to re-flash the original T-Mobile UK WM5 ROM. I then ran the procedure a second time under XP and it worked. The OS may or may not have been the factor, first time round might have been something else. XP was required to restore the original ROM.
The update to WM6 was well worth it in my mind even if purely for the instantly noticeable speed increase of the software.
thanks gajet - i'm gettign more and more tempted. one more thing - where could i get hold of the original t-mob uk rom - just for safety.
cheers
si
if its anything like finding a WM5 tmobile NL rom i'll wish you good luck. couldn't find one after bricking my own MDA CIII trying to upgrade it to WM6.
if you brick it your only choice is to wait until the official WM6 release from tmobile UK or send it back to them for repair
hi fout
well looking at gajet's post it seems there is a uk rom out there in the wild - just wondering where i might find it....
si
I actually found you the link in the main WM6 WWE topic, it links directly to the file on rapidshare.
here you go: http://rapidshare.com/files/17854890/art_tmouk_11311001_024990_wwe_ship.exe
and good luck upgrading your device, can't wait until mine gets back
thx fout - i thought i'd seen it somewhere - you found it - cheers!
si
ok guys - i did it! worked first time - heart in mouth for 15 mins but well worth it. got all my apps working no problem and remembered to write down the t-mobile gprs settings for once!
one other benefit for uk t-mob. on web&walk standard you can't use your phone as a modem - but with this setup you can fabulous!
cheers
si
Installed it today on my MDA3c T-Mobile
But where can I configure the SMS messaging center # (+447958879879) ???
solved
from another thread (Hermes WM6) :
start>phone>menu(softkey)>options>services(tab). Select "Voicemail and Text Messages" then tap "get settings".
Hiya, that rom you posted, what rom is that? Is it an official t-mob one or is it converted from somone else? Thanks
Oh, and how does it work on the UK MDA with its missing wifi?
dannyoneill said:
Hiya, that rom you posted, what rom is that? Is it an official t-mob one or is it converted from somone else? Thanks
Oh, and how does it work on the UK MDA with its missing wifi?
Click to expand...
Click to collapse
hi danny
it works fine with the lack of wifi - just doesn't have a button in comms manager as before. the rom we're talking about in this thread is the official t-mob uk wm5 (five) rom - which is good to have in case the update goes wrong.
i'm using bepe's rom on my mda c iii and it's tons better than the original. just make sure you read the threads first for instructions.
good luck.
si
thanks, which wm6 rom do you recommend?
If anybody interested in my few hours expirience with MDA C III UK + WM6 here it is:
Device: MDA Compact III UK original ROM,
Unlocked before wth IMEI Check
First I used the USPL as advised by Pof here http://forum.xda-developers.com/showthread.php?t=311479
It didn't work first time. I had errors 260 and 270. I repeated the process and it went OK after second time. Then I flashed with the B&W V2 rom. It seemed to end OK.
Notes: Before the play I used latest SPB Backup and made full backup in FlightMode. First thing I did after waking the device in WM6 was restore from it. The process went OK. After restart I got tens of notifications about installing untrusted or something DLLs and EXEcs. After that it hanged and didn't even wanted to wake up anymore.
So - hard reset -> partial restore -> PIM data only and it worked.
Excel and Word are buggy in terms of file handling. You can forget about them for now or use only as readers.
Comm Manager was working only up to the first reset. Then all buttons are hiden under the last one in upper-left corner. You can actualy see them rendering one after another.
GPS checked using iGo 2006 - working fine.
Conclusion:
I'm going to check how it synchronises with Missing Sync on my Mac. The latest version sould work with WM6. If it works I think I'm gonna stay with it longer. Word & Excel is not used by me often enough to stop me trying this Rom. Comm Manager - though, can try to live without it.
I have just flashed with the black and blue rom and all is well apart from the comm manager, yup, all one big mess in the top left. think its something to do with wifi, it was fine on the first boot, it showed the wifi icon but now its reset its gone all funky.

O2 Orbit Original WM5 Rom 1.25.206.2 found - SD card image

Hello Everyone, Have spent 6 Days hunting for "O2 Orbit Original WM5 Rom ARTE200 1.25.206.2" with little success
I am now putting a bounty on the head of this ROM in the form of a £40 Paypal transaction. I will make instant Payment after the ROM has been verified as the genuine ROM and then make the ROM available to all though Rapidshare, and with some luck help to un-brick a lot of O2 Orbits before O2 UK WM6 is released.
Contact me on [email protected]
Problem caused by - Updating ROM without running USPL on a CID Locked O2 Orbit, The device is USB Bootloader contactable but requires the identical original ROM to restore "Error 244 Device ID"
Many thanks to everyone for their continued help and support.
Rom
1.25.206.2
Radio
02.67.90
Protocol
4.1.13.28
MOD EDIT - SEE POST 12 OF THIS THREAD
the only way you will find this rom, is either on o2 xda website after a WM6 update and hopefully they will do this as a downgrade option after upgrade to wm6.
or
the only other way is to know someone who works for o2 uk, there repair centre will have the only copy, and the only way to maybe even get a copy, is if you are good friends with someone in that department.
currently, there is no rom, for o2 anyway, yet.
goodluck finding it though, you just never know.
oliversettle said:
Hello Everyone, Have spent 6 Days hunting for "O2 Orbit Original WM5 Rom ARTE200 1.25.206.2" with little success
I am now putting a bounty on the head of this ROM in the form of a £40 Paypal transaction. I will make instant Payment after the ROM has been verified as the genuine ROM and then make the ROM available to all though Rapidshare, and with some luck help to un-brick a lot of O2 Orbits before O2 UK WM6 is released.
Contact me on [email protected]
Problem caused by - Updating ROM without running USPL on a CID Locked O2 Orbit, The device is USB Bootloader contactable but requires the identical original ROM to restore "Error 244 Device ID"
Many thanks to everyone for their continued help and support.
Rom
1.25.206.2
Radio
02.67.90
Protocol
4.1.13.28
Click to expand...
Click to collapse
Hi, I have got O2 orbit with this rom and if somebody tells me how to get it from xda into the pc I am happy to do it and share.
majo_scigo said:
Hi, I have got O2 orbit with this rom and if somebody tells me how to get it from xda into the pc I am happy to do it and share.
Click to expand...
Click to collapse
There is already a dump availalbe, but no known way to bypass the bootloader security to load it.
How are the guys at IMEI-Check unbricking them? Either they have a WM5 O2 rom (which means it has leaked) or are they hot-swaping/reflashing roms, or using some vulnerability in the bootloader?
Just out of interest, does anyone have an XDA that has been unbricked by IMEI-Check and did it show any signs of being disassembled?
O2 Orbit Original WM5 Rom ARTE200 1.25.206.2 "IMEI-CHECK" Information
O2 Orbit Original WM5 Rom ARTE200 1.25.206.2
IMEI-CHECK Information
"" The only thing we can offir (for EUROPEAN customers) is to send the device so we can fix it.
We don't have a "magic" ROM which can fix your device. It is hard work to open it and to reflash the rom directly to the flash chip...
IMEI-CHECK Team ""
good guy!
thank you very much!
I would be very very grateful if this ROM appeared!
well, well...
not sure if i'm 100% if this is ground breaking stuff, but i just received my xda from o2 repair centre and when i went to put my sd card in phone there was one in it already from o2 which has WM5 image on it?!
step0011 said:
not sure if i'm 100% if this is ground breaking stuff, but i just received my xda from o2 repair centre and when i went to put my sd card in phone there was one in it already from o2 which has WM5 image on it?!
Click to expand...
Click to collapse
This is indeed quite interesting, it is obviously a SD flash used for restoring the Orbit. If you could make an image of the SD card I'm sure there are many people here who would be eternally grateful.
well, this will be done as soon as i get home tonight, if someone is willing to host the file i will make it available,
step0011 said:
well, this will be done as soon as i get home tonight, if someone is willing to host the file i will make it available,
Click to expand...
Click to collapse
I send you on PM.
Mac
http://rapidshare.com/files/41574866/Arteimg.nbh
rite, uploading to mac now, managed to upload to rapidshare, (address in title)
It's works!!!
http://makus.folijka.pl/OrbitO2UK.rar
set as sticky if you can )
Thanks !
Mak
Thanks Step0011 for the rom image and makus for confirming that is works - i have made the thread a sticky - will download the image and confirm it works myself.
Step0011 should get the £40 bounty from oliversettle!
I Just UNBRICKED my orbit with this
Hi. A BIG BIG THANX !!!!! I just unbricked my orbit with this. I tried to flash it with WM6 and failed to run the USPL and bricked it. Now using this original WM5 put it back where it was before I bricked it. I had usee Artemis USPL and replaced the RUU_USPL_signed.nbh with this and worked like a charm from boot loader. (record button and softreset) Now I can flash anything I want and bring it back if I brick it again. Thanx a lot. YeeeeeHa
Hey guys,
I'm new to this forum but I must say that I am very impressed abt the works done. I do have a very expensive brick!! Ya! Ya.. my orbit is a BRICK. well I didn't do it, A friend of mine did.. tried to flash WM6 mini O2 into the orbit and VIOLA!. A BRICK!! Well! I knew this wud happen but hey, it wasn't me who did it.Hence I'm in this forum day in day out. tried every possible thing. flashing with SD or MTTY, every thing U guys had offer but got the same device ID error. so far no hope, but am currently downloading the image thru rapidshare http://makus.folijka.pl/OrbitO2UK.rar. Have to get a rapidshare account though. Hope this works.... will post soon.... keep ur fingers crossed.
A Big Hug to step0011. for a hope.
And the rest for the XDA developers.. all i can offer is my wallet.cause I'm not a software developer, but am into hardware repairing. And I will post the results if any for u guys who keeps this forum alive and kicking.
cheers pof and to all.
Another happy WM5 Orbit user again. It has beena chore using an OLD spve200 for the last few weeks. Taught me a valuable lesson though.
Thanks for the up.
Bravo! And well done to the O2 service bod who forgot to take the MicroSD card out!
Now how do I use it? Put it on a SD card and switch on?
i just replaced the german rom file with the uk orbit one (renamed to match original) and then ran the update from windows (phone in bootloader via usb).
A little suprised it actually worked in vista!
Yippeeeeeeeeee!!!!
Fisrt of all whoever he is he owes step0011 40 bucks..
Lots and lots of thanks to step0011 for providing the ROM image and also to the guy who forgot to remove the SD card. He had made a lot of people happy.
Hi guys.
I did it. My orbit is alive and kicking. there is nothing to it, just download the ROM and run RUU. and VIOLA! good as knew.below are the details
bootloader (this is all I can see now but before when it was bricked it showed the GSM no. too )
IPL 1.25.0001
SPL 1.25.0000
Device information
ROM version: 1.25.206.2 WWE
ROM Date : 10/4/06
Radio version : 02.67.90
Protocol version : 4.1.13.28
ExtROM version : 1.25.206.10
Works like a charm. to think that I wud have to wait for official ROM release.
Now I can do anything I want. I can brick it as much as I can. and flash the WM6 ROM. Now I am thinking of tinckering with the ROM cooking steps u guys are telling abt. I'm going to customise my own ROM. . First of all to superCID the orbit. wish me luck.
much thanks to all who keeps this forum alive.
BRB.

Downgrade Artemis back to WM5

Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue
You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.
I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM
Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue
You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.
Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue
... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.
I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!
well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus
Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM
you 're right after upsl you can downgrade or upgrade... many tnx for info...
HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++
For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580

Categories

Resources