i paired the headset with my device for both wireless stereo and hands free. however, every time i power the headset off and on, my P3600 device asks me to pair the headset again.
my understanding is once they are paired, whenever i enable BT for both devices, they should automatically pair and NOT having to do it every time.
this is what i have under the BT taps...
Devices - i see my headset as one of devices
Mode - both turn on BT & made this device visible are checked
COM Ports - New outgoing port
Security - authentication required NOT checked
FTP - enable file sharing is checked
am i missing some settings???
After you pair the device try shuting down the pda. No reboot shut down, that should do the trick
Related
Hi, I'm a first time poster and I'm on the verge of pulling my hair out.
I have an SPV M600 and have just bought a Pioneer DEH P75BT car stereo because of its bluetooth capabilities.
It has two bluetooth modes: Telephone and BT Audio. After a lot of playing around I have managed to get both modes working together....ish!!!
I've installed the A2DP hack from this site enabling the streaming audio which actually sounds fantastic through the car speakers.
The problem is that to get the BT Audio to work I have to delete and repair the phone with the stereo every time I get in the car. This involves the following actions:
Open Comm Manager
Tap settings
Tap bluetooth settings
Tap devices
Tap and hold the Pioneer BT unit
Tap delete
Tap yes to confirm deletion
Tap new partnership
Wait for scanning to complete
Tap the Pioneer BT unit
Tap next
Enter passkey (four taps)
Tap next
Tap finish
As you can imagine, this process is a real pain in the backside every time I get in the car so my question is this.
Can the above actions be automated in just one command? If so how? (bearing in mind I do not really know how to write scripts)
If someone could even point me in the direction of learning to write a script for this I would be grateful. I have downloaded and installed MortScript but I don't really know what I'm doing with it.
Why when you tap and hold the device doesn't the "set as wireless stereo" command work the same as when the stereo and phone are newly paired? Surely it's the same command.
Any help would be gratefully received.
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
JRH said:
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
Click to expand...
Click to collapse
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Hello I had the same problem: erase, new, etc.
but i have discovered one thing: you must only change de name in the bt description of your hands free
neomagik said:
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Click to expand...
Click to collapse
I was just about to point this fella in your direction ...
You'd have to do an indefinite loop while checking a registry value to see if your stereo was found. There is a key, i'm sure, for a list of found devices but I don't know where that is. As for detecting your car stereo as the one to pair with; depends on what keys are saved, sounds like it may just be possible.
I'll have a look into this as I'd like to get this stereo also if it can connect & stream automatically
If returning it is still an option, I'd get the Sony Bluetooth Audio headunit. Works great for listening to audio from your phone. It pairs it automatically. I also use Jawbone headset for talking on the phone. It kicks off the stereo and goes to the headset when a call comes in.
The built in mic is in the headunit and in my loud car, its subpar in quality. Whicj is why I use the excellent Jawbone.
I personally own a Peekton 950 car stereo and it works great with my wm5 (a2dp enabled) and my new WM6. the only thing that it does not do is autodiscover and connect the A2DP while it does it for the headset profile.
one other thing I would enjoy is to have the idtag displayed while getting the A2dp but I guess this is not part of the spec.
As I wrote in this topic, I guess the A2DP profile has two way of linking.
1°) The "headset" way : a bluetooth A2DP headset initiates communication to the music player/WM device.
2°) The "passive" way : The speaker just waits for a known bluetooth audio player to connect/link to it.
What surprises me is the fact you need to unpair-repair your device everytime : have you tried what I explain in the previous topic : just go to bluetooth devices , long tap on your spearker's name and choose "use as bluetooth speaker" (may not be exact name of the option since I've a French phone ).
On my phone, this simple (but annoying enough) action connects my phone to my bluetooth speaker (not an in-car one).
Hope this helps
PS : If you find any way to script/automatize the connection or any app more convenient than opeining the bluetooth setting, I'd be very pleased to be informed
This probably wont help the OP's problem, but for the rest, this freeware is brilliant, and can be automated using command line switches to work via mapped keys.
http://www.teksoftco.com/index.php?section=freeware
Surur
Many thanks for this piece of software Susur. I tried it, but I didn't manage to use it to initiate connection to my bluetooth a2dp speaker.
It's a very usefull software when your device is connected to an A2DP speaker/headphone.
There is a DIY option bluetooth headset acting as audio receiver.
http://www.grynx.com/projects/bluetooth-stereo-in-the-car/5/
A2DP Blueooth Car Stereo won't reconnect to mobile
I have the Pioneer DEH-P9800BT Bluetooth Head Unit in my car, which supports stereo BT music streaming from any A2DP device.
I also have the HTC TyTN II Mobile which supports the same.
I have paired the two devices, and on the initial pairing successfully played music from the HTC through the Pioneer. When that worked, the BT Audio icon appears in the title bar of the mobile (headphones with a musical note in the middle).
However, after switching off the car and later returning, I have 2 issues:
1) It is impossible to reconnect the BT stereo music playback, unless I delete the Pioneer device from the list of BT devices within the mobile phone, then pair them again. Nothing else seems to work. Simply, I just want all music to be routed through the Pioneer whenever it is in range of the mobile.
2) I have set the mobile phone as "Phone 1" in the Pioneer, and have enabled "Auto Connect", yet it does not auto connect. Every time I get in the car I have to manually scroll to Telephone>Function>Connect Phone>Phone 1. You can imagine what a laborious pain that is compared to my previous 5 year old Nokia Bluetooth Car Kit which just auto-connects whenever my mobile is in range.
Are you able to solve either problem?
Im having the same problems with my sony DR-BT10CX and Moto HT820 whenever i turned either devices off. But whenever i turned them back on, i usually uncheck and recheck the headset whenever i want to use A2DP. It's a pain but i never had to re-pair my device with my tilt.
Try unchecking/checking the bluetooth device instead of re-pairing them (although in your case, its a PITA).
Have you tried updating the firmware on the Pioneer (if its possible anyways).
I have an ATT Tilt w/ the my customized HTC rom. But my JVC BT1 never has any problem to reconnect to my phone.
1) I found a program called A2DPToggle which provides an on/off button on the home page to solve this
2) I found I have to leave the phone in 'visible' Bluetooth mode for auto-connect to work. Less secure, but solves the problem
While this may not help, while messing with my Audio linking between my pda and pc , The PC BT adaptor would freeze if I tried to stream an AAC file or a non mp3 file. It would play it for 10-15 seconds then freeze. I imagine not all mp3
s are created equal for BT purposes either.
I have a Jabra BT620s bluetooth wireless stereo headset which I use as an headset and my music headset on the touch hd. I paired them succesfully and playing music with mediaplayer works perfectly.
The problem is when I turn on my Jabra headset. It pairs with my phone fine, but it isnt set as wireless stereo on start. So I have to set it in the bluetooth configuration screen everytime I turn the headset on, cause else the music plays over the speaker of the phone.
Is there anyway to let windows mobile always be forced to set the headset as wireless stereo?
Same problem with Funkwerk EGO Talk
I've have got the same problem with Funkwerk EGO Talk Bluetooth carkit with A2DP. Pairs at the start with Headset Profile, so calling works(except the hangup button btw, ?which redails?? most of the time). But it doesn't start the wireless stereo profile.
I have to "Set as wireless Stereo" everytime i reconnect with the carkit
Anyone has a solution or workaround to start "Set as Wireless Stereo" automaticly or at least in 1 button?
Guys, using the search function would have turned up the following solutions found previously on these forums:
a) use Mortscript to macro the key presses
b) firmware update the headset (i.e. Jabra)
c) try turning on music and bluetooth before the headset - worked for some people
I have the same problem as you, any other suggestions?
I've the same problem with Moto music/blutooth headset
Hmmm
I don't have this problem with my Sony-E HBH BT set. Each time I turn it on the pairing is automatic and get stereo immediately.
I also can have the pocket player or TF3D media player running or not and it will change "on the fly" to BT when I turn on the headset.
No problem here with Motorola S805's.
I turn the phone BT on, turn the headphones on, press play on the headphones and get music.
I have the same problem with my motorola S705
Auto pairing with calls is ok but not with stereo A2DP. I must turn headset on manually in the bluetooth otpions which is quite long and annoying.
Pairing was working good with my TyTN. So there might be a problem somewhere
I've had some problems with my Samsung SBH170 not connecting at all.
I removed them from the BT settings and repaired, now they are found with out problems, allthough not very quickly.
In 'Advanced Configuration Tool 3.3' I came across 'Bluetooth Audio Gateway Service' which was disabeled, I enabled it and rebooted, but it doesn't seem to make any difference on my machine. According to this thread it may be required to enable audio over bluetooth: http://forum.xda-developers.com/showthread.php?t=424424
Regards JD
As I faced this I am sharing the info with you all. I hope you benefited.
After pairing up 3 to 4 devices, sometimes you need to connect to a new one for which it doesn't pair directly in the same way the mobiles
1. Your mobile device supports the A2DP Bluetooth profile and has a music player feature.
2. Ensure that your mobile device Bluetooth is switched on and press and hold power button for sometime until blue indicator light starts to flash quickly or blinks.
3. Within about 3 minutes, activate the Bluetooth feature on your device, and set it to search for Bluetooth devices. naming like BH-505 or any user named by user.
4. Select the headset from the list of found devices.
5. If necessary, enter the code 0000 to pair and connect the headset to your device.
when that device get connected it's ready for use.
Hi, every one! I bought brand new JBL Bluetooth Headset, model name is JBL Reflect mini BT2, and when i turn bluetooth and headset on, there is nothing in the pairing menu. I had older BT-Headphones and everything worked fine. However, the JBL headphones connect to my Galaxy Tab A perfect. On my Mi5S runs LineageOS 16.0, latest update.
Greetings
You might have already tried this since you managed to pair the headphones to another phone, but maybe they don't want to pair to a new device unless the following is done:
To connect to a different Bluetooth device, first switch the headphones off.
Now press and hold the center button on the headphone remote control for about 3-5 seconds.
You should see the light blinking red/blue to indicate pairing mode, and the voice prompt should state “looking for device”.
You should see "Reflect Mini 2" appear on the source's BT list. Choose that option, and wait for the voice prompt to state “connected”
unicastbg said:
You might have already tried this since you managed to pair the headphones to another phone, but maybe they don't want to pair to a new device unless the following is done:
To connect to a different Bluetooth device, first switch the headphones off.
Now press and hold the center button on the headphone remote control for about 3-5 seconds.
You should see the light blinking red/blue to indicate pairing mode, and the voice prompt should state “looking for device”.
You should see "Reflect Mini 2" appear on the source's BT list. Choose that option, and wait for the voice prompt to state “connected”
Click to expand...
Click to collapse
I do this everytime and also did a hard reset on the headset and still not found.
I'm on LOS 16 too and don't have problems connecting to a headset or BT speaker. Here's one crazy idea Go to Developer settings (might need to enable them first - go to About phone, and click on build number at the very bottom until you get a note that you're a developer). Now go to System, Advanced, Developer options and under Networking hit Show Bluetooth devices without names. This will give you a list of BT MAC addresses. I'm curious if you see the JBL listed now. You can get its MAC address from the other phone.