Hi, I'm a first time poster and I'm on the verge of pulling my hair out.
I have an SPV M600 and have just bought a Pioneer DEH P75BT car stereo because of its bluetooth capabilities.
It has two bluetooth modes: Telephone and BT Audio. After a lot of playing around I have managed to get both modes working together....ish!!!
I've installed the A2DP hack from this site enabling the streaming audio which actually sounds fantastic through the car speakers.
The problem is that to get the BT Audio to work I have to delete and repair the phone with the stereo every time I get in the car. This involves the following actions:
Open Comm Manager
Tap settings
Tap bluetooth settings
Tap devices
Tap and hold the Pioneer BT unit
Tap delete
Tap yes to confirm deletion
Tap new partnership
Wait for scanning to complete
Tap the Pioneer BT unit
Tap next
Enter passkey (four taps)
Tap next
Tap finish
As you can imagine, this process is a real pain in the backside every time I get in the car so my question is this.
Can the above actions be automated in just one command? If so how? (bearing in mind I do not really know how to write scripts)
If someone could even point me in the direction of learning to write a script for this I would be grateful. I have downloaded and installed MortScript but I don't really know what I'm doing with it.
Why when you tap and hold the device doesn't the "set as wireless stereo" command work the same as when the stereo and phone are newly paired? Surely it's the same command.
Any help would be gratefully received.
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
JRH said:
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
Click to expand...
Click to collapse
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Hello I had the same problem: erase, new, etc.
but i have discovered one thing: you must only change de name in the bt description of your hands free
neomagik said:
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Click to expand...
Click to collapse
I was just about to point this fella in your direction ...
You'd have to do an indefinite loop while checking a registry value to see if your stereo was found. There is a key, i'm sure, for a list of found devices but I don't know where that is. As for detecting your car stereo as the one to pair with; depends on what keys are saved, sounds like it may just be possible.
I'll have a look into this as I'd like to get this stereo also if it can connect & stream automatically
If returning it is still an option, I'd get the Sony Bluetooth Audio headunit. Works great for listening to audio from your phone. It pairs it automatically. I also use Jawbone headset for talking on the phone. It kicks off the stereo and goes to the headset when a call comes in.
The built in mic is in the headunit and in my loud car, its subpar in quality. Whicj is why I use the excellent Jawbone.
I personally own a Peekton 950 car stereo and it works great with my wm5 (a2dp enabled) and my new WM6. the only thing that it does not do is autodiscover and connect the A2DP while it does it for the headset profile.
one other thing I would enjoy is to have the idtag displayed while getting the A2dp but I guess this is not part of the spec.
As I wrote in this topic, I guess the A2DP profile has two way of linking.
1°) The "headset" way : a bluetooth A2DP headset initiates communication to the music player/WM device.
2°) The "passive" way : The speaker just waits for a known bluetooth audio player to connect/link to it.
What surprises me is the fact you need to unpair-repair your device everytime : have you tried what I explain in the previous topic : just go to bluetooth devices , long tap on your spearker's name and choose "use as bluetooth speaker" (may not be exact name of the option since I've a French phone ).
On my phone, this simple (but annoying enough) action connects my phone to my bluetooth speaker (not an in-car one).
Hope this helps
PS : If you find any way to script/automatize the connection or any app more convenient than opeining the bluetooth setting, I'd be very pleased to be informed
This probably wont help the OP's problem, but for the rest, this freeware is brilliant, and can be automated using command line switches to work via mapped keys.
http://www.teksoftco.com/index.php?section=freeware
Surur
Many thanks for this piece of software Susur. I tried it, but I didn't manage to use it to initiate connection to my bluetooth a2dp speaker.
It's a very usefull software when your device is connected to an A2DP speaker/headphone.
There is a DIY option bluetooth headset acting as audio receiver.
http://www.grynx.com/projects/bluetooth-stereo-in-the-car/5/
Related
I've recently acquired one of these headsets and have managed 2 pair it with my O2 XDA II mini. However, i am unable to stream music to the headset but am able to answer calls and make them too. Does anyone know how i could stream music from my phone to my headset?
if you check in the forum for your pda, i believe you will find you have to upgrade your bluetooth software?
then you will find new menu's in the bluetooth settings including audio/audio streaming.
have the headphones, and am very pleased
already have da software
Hey, i already have the software but the thing is nothing appears in the box labelled "default headset" even after i have paired the device with my XDA. And whenever i try 2 stream music, it initially says connecting but eventually the connection fails and the music does not stream to my headset. Does anyone know how i can get the headset to appear in the default headset drop down box?
when you paired the h/set & phone, what choices did you get?
When I turn my headphones on, my handsfree part pairs but my stereo part won't pair automatically, usually. I just connect it manually, but sometimes it won't just connect so I have to disconnect the handsfree part before I connect the stereo part then reconnect the handsfree part. Occassionally, I have to repeat more than once.
Pair it to the device you want stereo from, start the default "Headset" system for normal talking, press the left multifunction to terminate the connection to the "headset" profile, then press the right multifunction button to trigger the "stereo headset" profile to start.
Or, try to force it after pairing and then press the rightmultifunction to accept the connection and have the device bind that call to that function, enabling and disabling the stereo data.
I had to do the first part with my new HP iPAQ hx2495 to get the stereo headset profile going when i installed the headset as both stereo and regular.
I finally got my HT820 working
I have a T-mobile US MDA.
I first upgraded to ROM 2.24 which supports A2DP, which is what the headset uses for sound other than the phone. (When you flash your ROM it intalls all new boot up software so it changes your hard-reset process, and you lose your support.) Then I paired. You should see the services the headset offers, handsfree and stereo. There's also a menu available when you hold-slelect the name of the BT device in the device list that's handy.
I did discover that it is a headset problem if the sound skips out irratically averaging about 20 seconds. There was a bad batch sent out to/from Hong Kong. Motorola is replacing mine, but I had to pay to ship it to them.
Hope this helps!
I don't want to hijack your thread but I don't know where else to turn. I have requested help elswhere on this forum for my problem but I can't seem to get any help.
I have a ht820 and a cingular 8125. I've been able to pair the headset with my phone but, when I try to play a mp3, the voice speed dial comes up, the mp3 plays for about 3 seconds, then the mp3 audio reverts back to the phone.
Do I have to flash to a different rom, do I have to tweak registry settings? I don't really have a clue what I should do. Please help.
Porter
Edit: I've solved my problem. See this thread for my fix.
http://forum.xda-developers.com/viewtopic.php?t=58192&highlight=
Thanks
Actually what it sounds like is the phone is only connecting to the headset for that time under the premise of a voice dial with the headset profile. I think you're lucky enough that you can get it to play for those 3 seconds. I have a Sony Ericcson w810i and I can't even get any audio from it to the headset at all without using the w810i's 3.5mm adapter to the patch cable on the headphones which just looks weird. But you might want to do a search for your model phone like this, "Cingular 8125 Motorola HT820" and see what kinda results you get.
Heya,
for a long time i have been looking for some decent bluetooth stereo headset.
now it has come down to two models. well, actually one only
my choice: motorola s9
and the second possibility: Motorola T820
from reading the comments on amazon on those devices i realize that my phone needs to be A2DP compatible to get the best sound out of the headset.
i use s2p as music player and i know it is A2DP compatible... but is real question is: is my phone (HTC P3300 WM6) compatible with this tecnology
also: if you can suggest any other good headsets, please do so.
key features i seek:
- able to use on my phone and pc
- a2dp
- good sound and microphone quality
a2dp not working
Hi,
I have HTC artemis. I recently purchased wireless bluetooth stereo headsets (Jabra bt325)
I cannot connect it to use as wireless stereo. Its working fine as handsfree. After pairing, I cannot see wireless stereo option. Its Greyed. I know that artemis is A2DP compatible.
But i am sure that headset is fine because I tested it with n95 and it worked fine.
Please give me a solution.
Try this:
Start - settings - connections - bluetooth - and add new device
If your headset is already added, use your stylus and press on the bluetooth headset name until the following menu comes up:
Edit
Delete
Set as Hands-free
Set as Wireless Stereo
Choose no. 4
yes it is.
I'm using Dopod M700 which is the P3300 w/o the GPS module.
It works with dell BH200 BT stereo headset and also the o2 BT stereo earphones.
It works on joint stereo in WM5 and since its now running WM6.1 its real stereo.
Dell BH200
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
sameerbs said:
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
Click to expand...
Click to collapse
might be a specific problem of your headset model.
i use a motorola s9 and it's quite nice. fits nice, does not disturb after hours, controls work fine, calling works fine...
BUT (and there's always a but) it has some major drawbacks i found out. while it's still nice to listen music without wires, i encounter this problems. which MIGHT be due the phone, not the headset... but i have no way to test that.
so, basicly, P3300 + motorola S9 through A2DP:
- insides works like a charm. phone in my belt, headset on. music cuality nice with some small music interrupts every now and then (maybe once per 5 minutes). phone calls nice and i can hear and they can listen me well.
but my oh my when i get on the street...
- constant music interrupts every 15 seconds. i have hang the phone around my neck so it's where my chest is to not get interrupts so often (still get one every 2-3 minutes)
- as the mic is where the ear is, if i have a call, it's impossible to hear me due the background noise. this also applies to the underground/metro. it's not that bad in a bus
and well. without A2DP enabled my music player uses so little resources the phone still works fine...
if A2DP is enabled, the phone gets REAL slow and the battery drain is MASSIVE.
when this motorola S9 break... i'll get another model to test. and when that breaks i'll probably get back to some nice wired ones (unless the CPU issues and the battery drain on the phone gets solved) ... but maybe i actually change the phone before that happens. who knows.
I have searched around XDA and haven't found a solution to this yet.
I have a wireless transmitter to play music in my car. When I turn bluetooth on it automatically turns on 'Hands-Free' but doesn't turn on 'Stereo Audio'.
Previously on my Kaiser (with a different car kit) turning on the transmitter set it up automatically.
I have tried AutoA2DP (from http://forum.xda-developers.com/showthread.php?t=530932) but I'm not sure it worked - it certainly hasn't achieved the effect I want (although it does seem to open Media Player when I connect now).
Anyone found a solution on the TP2?
Cheers,
I did have take a quick look at my TP2, because I had no problem with the connection. My car radio (Sony Xplod) gives 2 icons... 1 from the hands-free and the other of my Audio. I've looked in my settings for you, and found one option what must be checked. It's something like: Make a seperate connection for handfree and audio! (I'm guissing to that sentence becuase I have a dutch ROM!)
Hope it helped you!
greetz
EDIT:
Just did take a closer look into my car, and now it also didn't take the extra connection with my sterio audio. This is the solution:
Go to Com Manager
Press Setting
Press Bluetooth
Take the second tab
And tap than Sterio Audio
Now He's saying he's trying to make a connection e voila! Now it's playing music true your car audio!
(This is the way with TF3D2!'
rolfie23 said:
I did have take a quick look at my TP2, because I had no problem with the connection. My car radio (Sony Xplod) gives 2 icons... 1 from the hands-free and the other of my Audio. I've looked in my settings for you, and found one option what must be checked. It's something like: Make a seperate connection for handfree and audio! (I'm guissing to that sentence becuase I have a dutch ROM!)
Hope it helped you!
greetz
EDIT:
Just did take a closer look into my car, and now it also didn't take the extra connection with my sterio audio. This is the solution:
Go to Com Manager
Press Setting
Press Bluetooth
Take the second tab
And tap than Sterio Audio
Now He's saying he's trying to make a connection e voila! Now it's playing music true your car audio!
(This is the way with TF3D2!'
Click to expand...
Click to collapse
Yes - I've been doing this every time I get in my car - I just wish there was a way of doing it automatically (and then preventing the message 'You can't control audio via this headset' or similar).
Cheers,
Jim.
Hi,
Same problem in my car. Same car radio working with two (Sony Ericsson) phones I used before. They always connected immediately (both 'Hands-Free' + 'Stereo Audio). Strange that the TP2 is not comfortable with this simple task. Indeed, I think the option "Connect separately to Bluetooth hands-free and stereo audio services" should be unchecked but despite this option, the TP2 is still waiting for the appropriate tap. Going to BT settings and tapping 'Stereo Audio' each and every time is frustrating and uncomfortable.
Added subscription to this topic.
I'm a bit frustrated too with the AD2P auto connect problem.
I have a Sony MEX-BT3700U Car radio.
When I sit in my car, the handsfree function connects automatically with no hassle.
But not the Stereo Audio (A2DP) function. I connect it via the Bluetooth settings. After that it works great.
The problem is I'm always focused to activate AD2P manually first before I drive and forget that I have yet to start the car. So I have to start over. Going to settings > Bluetooth Settings etc. etc. ANNOYING!
So. I tried A2DP Toggle in combination with A2DP Auto Connect. Doesn't work.
Went searching for hours... But nothing. Think it has todo with the different BT Stack compared to other HTC's.
Still hoping for a solution.
@Ramsfan_Jim: which wireless transmitter are you using? I'm thinking of buying one to use w/my TP2. My factory head unit (VW Monsoon) doesn't support bluetooth.
t-readyroc said:
@Ramsfan_Jim: which wireless transmitter are you using? I'm thinking of buying one to use w/my TP2. My factory head unit (VW Monsoon) doesn't support bluetooth.
Click to expand...
Click to collapse
I originally used a Venturi Mini - which had the advantage that it automatically set up handsfree & audio transmission as soon as I turned it on, but unfortunately it broke (repeatedly) with regular use.
I now use this one http://cgi.ebay.co.uk/Car-MP3-FM-Transmitter-Bluetooth-Handfree-w-2-Remotes_W0QQitemZ250445424484QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item3a4fb5e764&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A6%7C72%3A1683%7C293%3A7%7C294%3A25 which is much sturdier - and seems to have a stronger signal. However, I have to change the bluetooth settings on the TP2 to enable Stereo Audio each time I connect.
Warning - this is a much bigger device, so dependent on where your cigarette lighter is in the car, it may get in the way. I had to buy an extension lead to move it so I could use the gearstick!
Newsflash.
Found out how to auto connect to my bluetooth car radio with my TP2.
I have a radio channel bar (or whatever it's called in english) from one to six. There's a "pause/play" description small above the number five. I accidentally pressed it and it suddenly connected my phone through AD2P.
So just press play and it gets connected. So no software needed for me.
I don't use a BT car radio but I do have a stereo BT and a regular BT headset. The stereo BT has both Handsfree and A2DP profiles. But since I use the A2DP only, in my Kaiser under BT Services I unchecked the Handsfree profile and now my stereo BT autoconnects every time.
ChriX84: thanx, very interesting information, will try it tonight in my car !
Another interesting info (might be useful in terms of a .cab file preparation...): a "BT Mono" (i.e. not Stereo Audio (A2DP)) with a very low volume signal is obtained (in my car radio at least) when pressing the "Play" button on the media player (Core or WMP) while still having Stereo Audio option switched off under the BT settings.
lacsusz said:
ChriX84: thanx, very interesting information, will try it tonight in my car !
Another interesting info (might be useful in terms of a .cab file preparation...): a "BT Mono" (i.e. not Stereo Audio (A2DP)) with a very low volume signal is obtained (in my car radio at least) when pressing the "Play" button on the media player (Core or WMP) while still having Stereo Audio option switched off under the BT settings.
Click to expand...
Click to collapse
I am searching a solution too.
When A2DP isnt active but Headset is connected then you will always listen mono music in your headset...Its normal
Dani
ChriX84 said:
Newsflash.
I have a radio channel bar (or whatever it's called in english) from one to six. There's a "pause/play" description small above the number five. I accidentally pressed it and it suddenly connected my phone through AD2P.
Click to expand...
Click to collapse
This worked for me too. Was bugging me to the extent where I wasn't bothering streaming audio any more!
Nice tip
I always burned new mp3 cd's or connected my mp3player/phone through a aux-cable.
Bluetooth Stereo Music is a huge step forward for me. The ease of using one device for everything. Calling, playing music without any cables. Thank god for that invention.
brynweb said:
This worked for me too. Was bugging me to the extent where I wasn't bothering streaming audio any more!
Nice tip
Click to expand...
Click to collapse
What exactly is a radio channel bar? Do you mean like a media widget or radio widget?
Personally this a2dp bug is a deal breaker for me. I primarily use my device for audio streaming.
capncark said:
What exactly is a radio channel bar? Do you mean like a media widget or radio widget?
Personally this a2dp bug is a deal breaker for me. I primarily use my device for audio streaming.
Click to expand...
Click to collapse
Yeah where can you find this?
Regards,
Zar
The bar with all the channel buttons. 1,2,3,4,5 etc.
Above or under those buttons there are little symbols with play/pause etc.
Hi!,
I have a HTC Touch Pro 2 that I usually pair, via bluetooth, with my car. When this connection is made, a message shows up on the HTC’s screen informing that the connection does not assure some sound functions. Nevertheless, all the phone functions work great.
The problem is the gps. I bought a few days ago the gps software NDrive v10, and after a few tests I realised that when the HTC is paired with the car, there is no sound from the NDrive. I open NDrive and I can’t hear a single instruction!
The solution is turning off the bluetooth so I can hear the instructions from the NDrive, but this way I have no handsfree system for the phone…
Is there any way of solving this problem, having the HTC paired with the car, and at the same time, hearing the instructions from the NDrive?
Thanks!
MM
Are you pairing both Hands-free and Stereo BT profiles when you connect to the car? Maybe that program requires the Stereo profile to route sound through your system. Otherwise, only phone functions will be routed. My phone automatically pairs the Hands-free profile when I get in the car, but if I want to stream music from the phone to my car stereo I have to manually start the Stereo BT profile.
when you mentioned the car's BT profile I went and check the car menus, and I found one (that I missed previously) that gives the option of listening to the sounds from the HTC. Whether it is music or gps!
But I still have a small question. When the menu that I mentioned above is select I can only listen to sounds from the HTC. This means that when I'm listening to the gps I can't hear radio or cd player from the car...
Nevertheless, thanks for the help!
MM
On the HTC you can pair the phone and the stereo. If you disable the stereo on the HTC, that may get you what you are after.
marcom said:
when you mentioned the car's BT profile I went and check the car menus, and I found one (that I missed previously) that gives the option of listening to the sounds from the HTC. Whether it is music or gps!
But I still have a small question. When the menu that I mentioned above is select I can only listen to sounds from the HTC. This means that when I'm listening to the gps I can't hear radio or cd player from the car...
Nevertheless, thanks for the help!
MM
Click to expand...
Click to collapse
That's because the radio can only have one input active at a time, and when the phone is connec ted via BT in stereo mode, that's all it can handle. It doesn't matter if you're streaming music or GPS directions from the phone.
Hi
I have a Parrot MKi9200 that I connect my DHD to and it works perfectly for BT calls. The issue I have is that the profile also includes A2DP, so all my notifications play through the Parrot kit too. If I use the Satnav on my DHD, all the voice commands play back through the Parrot kit (and the phone speaker).
If I am playing music through my ipod or had the radio on, then this interupts the play.
Ideally, I want to keep the Hands Free profile (for phone calls) but switch off the A2DP part which I think is Headset. On my previous phone (Samsung Omnia) I had this option.
Is there a way to achieve this on my DHD as I'm fed up of having my music interupted with 'Turn left at the next junction'.......
I had the same with my BT handsfree headset. I haven't done it yet but I guess, if yiu go to Settings-Wireless-BT devices, select your handsfree device and choose options, just uncheck media and it will be fine.
I'll give that a go next time I connect - Can't remember it though from before unless I was in the wrong menu!
Strange, I want the exact opposite!
I would like my DHD to play the audio through my parrot all the time, ie: Satnav and streamed audio, my old N97 used to do that but the DHD only does calls...
Strange that we have similar bluetooth devices and same handset but have everything the wrong way round!
gavin watson said:
Strange, I want the exact opposite!
I would like my DHD to play the audio through my parrot all the time, ie: Satnav and streamed audio, my old N97 used to do that but the DHD only does calls...
Strange that we have similar bluetooth devices and same handset but have everything the wrong way round!
Click to expand...
Click to collapse
Your Parrot has to support this service in order to do it. If you don't see it in the profile I mentioned, it doesn't support it.
andreasy said:
I had the same with my BT handsfree headset. I haven't done it yet but I guess, if yiu go to Settings-Wireless-BT devices, select your handsfree device and choose options, just uncheck media and it will be fine.
Click to expand...
Click to collapse
My problem is that I have GPS commands playing through the cars speakers when on a 'phone call, meaning that I have to mute the GPS most of the time.
I have a parrot CK3100, and there is no option in "Settings-Wireless-BT devices, select your handsfree device" to modify the settings for that particular device.
This is the only niggle I have with the DHD which is the best in a long line of HTC devices I've had.
Hi,
My Parrot must support it as it used to work on my previous Nokia N97...
eadon said:
My problem is that I have GPS commands playing through the cars speakers when on a 'phone call, meaning that I have to mute the GPS most of the time.
I have a parrot CK3100, and there is no option in "Settings-Wireless-BT devices, select your handsfree device" to modify the settings for that particular device.
This is the only niggle I have with the DHD which is the best in a long line of HTC devices I've had.
Click to expand...
Click to collapse
Mine is CK3100 and I only have phone profile as well. It seems that DHD will give you the option for media only on headsets.However, I believe that there must be a hack for this.
eadon said:
My problem is that I have GPS commands playing through the cars speakers when on a 'phone call, meaning that I have to mute the GPS most of the time.
I have a parrot CK3100, and there is no option in "Settings-Wireless-BT devices, select your handsfree device" to modify the settings for that particular device.
This is the only niggle I have with the DHD which is the best in a long line of HTC devices I've had.
Click to expand...
Click to collapse
"Bump" this is really bugging me, is there a hack to stop GPS commands interrupting 'phone conversations?
andreasy said:
I had the same with my BT handsfree headset. I haven't done it yet but I guess, if yiu go to Settings-Wireless-BT devices, select your handsfree device and choose options, just uncheck media and it will be fine.
Click to expand...
Click to collapse
I tried this out and yahoo - it works fine - no more interuptions from emails, txts and satnav instructions
Gavin, goto the Parrot site and update the firmware of the 9200 to the latest release.