Hi
I have a O2 XDA orbit with HTC touch. this morning i turned it on and it couldnt/cant get past the first screen, its the HTC smart mobility screen with the system info, which is
IPL 3.04.0001
SPL 1.11.0000
GSM 02.98.90
OS 4.1.0.7
I tried a soft reset and a hard reset but neither worked. I can get to the bootloader screen but also cant connect via active sync to the PC. does anyone know a solution for this? the phone is SIM unlocked, could i just re install the ROM? if so where can i find it to download? if not is there another ROM that will work?
thanks and happy christmas
Related
Hi there,
I was running vanilla 3.01 fine!
But this evening my phone was turned off and it did nothing... no light not on the charger and my computer doesn't connect.
I've read a few threads which explained how i could fix this.
So after a hard reset my device only shows the 1st screen with the following information:
IPL 3.04.0001
SPL 1.11.0000
Then nothing.. it sticks to this screen.
Would any of you genuisses help me find a solution?
I would really appreciate! thanx! :-(
found the solution!!!! pffeww
Enter bootloader
Flash original ROM
cid-unlock
update ROM to Vanilla's 3.01
HAPPY!!!!
ps.. THANKS to Aje_fr!!!! (who already posted the solution!)
just in case you don't know how to enter bootloader;
hold down the note and power button and soft reset.
Veel plezier!
now really dead...
I was installing all my software but when I soft reset it was dead....AGAIN!!..
I entered bootloader again and repeated my previous steps.. but now my device goes to sleep instantly.
it doesn't do anything...
Send it to T-mobile I guess... (Glad I was able to flash the WM6 T-mobile [NL] version)
Anyone got an idea whit it could be?
mtomassen said:
I was installing all my software but when I soft reset it was dead....AGAIN!!..
I entered bootloader again and repeated my previous steps.. but now my device goes to sleep instantly.
it doesn't do anything...
Send it to T-mobile I guess... (Glad I was able to flash the WM6 T-mobile [NL] version)
Anyone got an idea whit it could be?
Click to expand...
Click to collapse
It could just be the backlight switching off. Ive read about this in a few threads. Ive experienced it myself with Meschles 3.01 ROM.
nm8 said:
It could just be the backlight switching off. Ive read about this in a few threads. Ive experienced it myself with Meschles 3.01 ROM.
Click to expand...
Click to collapse
Nope, even with te original T-mobile rom it dies after a few minutes...
Thanks for the tip though!
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
hi,
i've flashed my HTC P3300 and it was done successfully (using USPL) but the language was Spanish, i searched a lot how to change it to english since i dont understand a word of it.
through one of the forums, i was told to set the SysLang = 1032 in registry to get the english language, i done so, now, the phone is stuck in Welcome (WM6.1) screen and nothing is happening, not even responding to power key.
I tried hard reset, it doesn't work, i tried entering to bootloader, it also doesn't work.
Also, i am not able to connect it to PC since i guess its not completed up.
Just got stuck with a brick, can you help please. Really needed!!!!!!
FYI, on booting following is displayed (might help)
IPL 3.13.0001
SPL 1.11.0000
GSM 02.94.90
OS 4.1.0.7
Thanks
i have the same problem...
can anyone help???
please...
i realy need it....
Hi i am new in this forum but really old on the bussines, well the problem with my phone is that seems to be bricked, sometimes turn on hangs on operator logo and put black screen sometimes can get on boot mode some not, its an strange problem, already tried to flash with micro SD but no luck, i get the phone is this state to repair.
This is what i get when i put phone on boot mode:
IPL: 1.12.0001
SPL:1.12.0000
The phone is from the operator TIM Italy i will really appreciate if u help me to solve this insue.
Br,
Tito Millo
Standard ROM or Cooked One? Have you Used USPL before flashing?
D'rath
PS: I buyed a TIM Artemis for my girlfriend, I changed the ROM and no problems
Standar ROM yes i have tried to use USPL but no luck cuz phone doesnt turn on at all and i cant sync with active sync
Br,
Tito Milo
I am trying to flash my PDA with a new ROM, While working with HardSPL everything gonna alright, But during updating Radio or ROM i got a message Error with [ Error 262] unable to communicate, please help me
Error screen short attached
Try to flash when the phone is in bootloader mode
To enable bootloader mode hold volume down when the phone is off
or soft reset then hold volume down,you will see a tri-colour screen,that's normal
then connect to the pc and flash,this should solve
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
xburnsidex said:
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
Click to expand...
Click to collapse
you got HSPL installed, right?
How can watch it, if i got HSPL?
Okay... must install with mtty...
k
****
i´ve got a Brick... damn
how can i start the Ruu in the "tri-color" mode?
I think the RUU need the Active Sync..
Help...........
Problem resolved!
I've not any idea what happened but now i am able to flash my phone with any ROM. If i am not going wrong i think my phone was security restricted to install third party ROM, just HSPL with again and my problem resolved. Thank for support.
hold volume down and softreset! then with usb cable connected run the ruu file