Related
I've installed MARY 3.7.1 and some other cabs. After a soft reset it was normal that BT pairing, passwords and the GPRS settings were gone or didn't work.
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
I thought the solution was in MARY 3.7.1, but after uninstalling BT_DUN.cab I've found out that the settings were lost again.
The CAB is here: http://forum.xda-developers.com/attachment.php?attachmentid=39883&d=1180164571
Can someone check this with a ROM with the new XIP like MARY, PDAVIET, schaps, etc.?
Stingray66 said:
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
Click to expand...
Click to collapse
Hmm, at first glance you actually seem to be right which is good news for many among us
I had never installed that CAB before, and I learned to live with lost passwords etc. (never got around to trying the workaround), but that's all about to change with this easy fixSome more tests have revealed that in my case the "first glance" must have been sheer luck
I mainly checked whether wifi passwords were required again, and tried uninstalling/re-installing/rebooting/resetting/... but all I can conclude is that only sometimes the settings are preserved and still most of the times the settings are lost - this regardless of the aforementioned CAB.
Well, I haven’t lost hope yet, though. Maybe someone will figure it out, but the sooner the better
MANY THANKS,
It's seems works fine...
Many thanks again...
Stingray66 said:
I've installed MARY 3.7.1 and some other cabs. After a soft reset it was normal that BT pairing, passwords and the GPRS settings were gone or didn't work.
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
I thought the solution was in MARY 3.7.1, but after uninstalling BT_DUN.cab I've found out that the settings were lost again.
The CAB is here: http://forum.xda-developers.com/attachment.php?attachmentid=39883&d=1180164571
Can someone check this with a ROM with the new XIP like MARY, PDAVIET, schaps, etc.?
Click to expand...
Click to collapse
This would be VERY cool if it works! I hope that's all there is to it.
Thanks again Stingray66! PS: Do you drive a Corvette?
StefanoRuleZZ said:
MANY THANKS,
It's seems works fine...
Many thanks again...
Click to expand...
Click to collapse
Work here again too on the ROM FInixNOver 3.1
SuperSport said:
Thanks again Stingray66! PS: Do you drive a Corvette?
Click to expand...
Click to collapse
I did a couple of times, but I'm not in the position right now to buy one. Priority is my wife, kids and moving to another house right now, but a Corvette from 1966 is a great car ..... beautiful!
I already fixed this problem in my latest ROM (version 1.2).
I created a modified XIP and changed some buetooth drivers to verify A2DP still works.
I will create a personal ROM to verify if this solutions works too!
Would be great if this is another solution to fix the problem.
Ok, I found something!
I opened the rom the ausdim WM6.1 and Mary rom 3.7 and took the files of the *. hv ausdim and copy for the 3.7 rom Mary!
The two rom´s are the same version and don't have any trouble copy, and I noticed that once the 3.7 rom Mary no longer loses the passwords or the codes of wifi!
I think the problem is in the register!
HKEY_CLASSES_ROOT
HKEY_CURRENT_USER
HKEY_LOCAL_MACHINE
But where???
Translated by Google, sorry!
sergitec said:
Ok, I found something!
I opened the rom the ausdim WM6.1 and Mary rom 3.7 and took the files of the *. hv ausdim and copy for the 3.7 rom Mary!
The two rom´s are the same version and don't have any trouble copy, and I noticed that once the 3.7 rom Mary no longer loses the passwords or the codes of wifi!
I think the problem is in the register!
HKEY_CLASSES_ROOT
HKEY_CURRENT_USER
HKEY_LOCAL_MACHINE
But where???
Translated by Google, sorry!
Click to expand...
Click to collapse
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.
adewidt said:
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.
Click to expand...
Click to collapse
well actually the old xip didnt lose the settings, yet it cause unstable de system, problem include cant find the contacts, lose response when launch the programs from SD card after wake up. I've been suffering for a long time about it which doesnt happens with the new xip and i dont know why, with the same cooking only expect the new and old xip
themaskfly said:
well actually the old xip didnt lose the settings, yet it cause unstable de system, problem include cant find the contacts, lose response when launch the programs from SD card after wake up. I've been suffering for a long time about it which doesnt happens with the new xip and i dont know why, with the same cooking only expect the new and old xip
Click to expand...
Click to collapse
I did not experience any of the problems you describe.
adewidt said:
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.
Click to expand...
Click to collapse
So if it is the XIP that matters we cant have a fix right ? Roms using the new XIP are doomed to have crappy A2DP
firiel said:
So if it is the XIP that matters we cant have a fix right ? Roms using the new XIP are doomed to have crappy A2DP
Click to expand...
Click to collapse
As I already said, I managed to fix A2DP using the old bootkernel (nk.exe part of XIP).
This works for wm6.1 and wm6.0.
There is no reason good reason to use the new kernel in stead of the old kernel.
As i say 4 months before here:
http://forum.xda-developers.com/showthread.php?t=342269
the old xip section (nk.exe) is working better with trinity 400mhz.
All my rom in this 4 months is builded with old nk.exe and i tell to cookers to use them to.
I dont see any reason to use the new (dopod) nk.exe with that very iportant bug.
No problems and nothing, nk.exe is the kernel from the device no nead to update that in the future.
The only problem it was in a2dp sound but after the fix from adewidt (Thanks again) the sound it is perfect!
Thank's
adewidt said:
I already fixed this problem in my latest ROM (version 1.2).
I created a modified XIP and changed some buetooth drivers to verify A2DP still works.
I will create a personal ROM to verify if this solutions works too!
Would be great if this is another solution to fix the problem.
Click to expand...
Click to collapse
Well after some resets, it does loose it's settings.
@adewidt
I'll try your 1.2 too, but I think the DEVICE ID of TomTom will change again (like it did whenm we switched from WM5 (official) to WM6 (DOPOD))
Stingray66 said:
Well after some resets, it does loose it's settings.
@adewidt
I'll try your 1.2 too, but I think the DEVICE ID of TomTom will change again (like it did whenm we switched from WM5 (official) to WM6 (DOPOD))
Click to expand...
Click to collapse
Yes it change your device ID.
Hey. I have installed one of the new roms (19209) and of this time, my hermes always hangs (etc. when i receive a call or so, or in the morning after wake up from standby...)
Before i had Shadow 2.0 without problems (also WM6). Now (after 19209) i installed Shadow 2.1 and my hermes always hangs???
What could i do??
Please help me.
thx
pOpY
I found that I was having the same issues, phone hard reseting itself and all sorts, I did the following to resolve:
Flash to Official wwe Windows mobile 6.0 AT&T rom
update my hard spl to the latest,
replace radio rom
update to WM 6.1 image of choice,
this is supposed to be an issue witht he big storage roms screwing with the phones storage, flashing to an original rom appears to resolve.
Cheers
Steve
wow, thanks for the fast reply.
But before i flashed the Shadow 2.1 i have flashed an non big Storage Rom.
i havent tried to reflash radio yet, but i will do that and then flash an original ROm first.
Which ROM do you prefer?
Thanks
pOpY
popy2006 said:
wow, thanks for the fast reply.
But before i flashed the Shadow 2.1 i have flashed an non big Storage Rom.
i havent tried to reflash radio yet, but i will do that and then flash an original ROm first.
Which ROM do you prefer?
Thanks
pOpY
Click to expand...
Click to collapse
Hihi....
personally I suggest you to flash an official rom first ,
then go to flash the PDAviet rom ( my OS version) ,
its lightning fast and yet stable. ^_^
enjoy! ^_^
Another try....
Hey.
So i have done the following:
1. Flash HARD-SPL v9 (i had v7)
2. Check for Bad Blocks via mtty (nothing found
3. Flash Official HTC Rom (non big storage)
4. Flash Radio 1.54.30.10
5. Flash MY OS PDAviet rom (Green & Clean Version)
6. Installed my prefered Software:
PhoneAlarm
Resco Explorer
Birthdays Today Plugin
Large Startmenu
FTouchSL v2.5
PCM Keyboard 0.14
PocketCM-0.20b
S2U2 0.99p
SPB Mobile SHell 2.0
After some soft reset (while application installation) it starts up normally to the today screen and then hangs :-(
Does any of my installed software hang up???? Did anybody of you know if any of the above listed software is bad
(I could remeber that i always have installed this software without any problems (in Shadows 2.0 TE rom)).
cu
pOpY
did you make a manual hardreset after flashing the rom?
popy2006 said:
Hey.
So i have done the following:
1. Flash HARD-SPL v9 (i had v7)
2. Check for Bad Blocks via mtty (nothing found
3. Flash Official HTC Rom (non big storage)
4. Flash Radio 1.54.30.10
5. Flash MY OS PDAviet rom (Green & Clean Version)
6. Installed my prefered Software:
PhoneAlarm
Resco Explorer
Birthdays Today Plugin
Large Startmenu
FTouchSL v2.5
PCM Keyboard 0.14
PocketCM-0.20b
S2U2 0.99p
SPB Mobile SHell 2.0
After some soft reset (while application installation) it starts up normally to the today screen and then hangs :-(
Does any of my installed software hang up???? Did anybody of you know if any of the above listed software is bad
(I could remeber that i always have installed this software without any problems (in Shadows 2.0 TE rom)).
cu
pOpY
Click to expand...
Click to collapse
Hmmm. The advice given was to flash the official AT&T ROM before doing anything else ... yet I do not see that step in the list of things you've done.
Instead I see you've flashed a different one. And you still remain unsatisfied with the outcome.
If your problems persist, I would highly suggest USING the advice you've been given before seeking additonal advice. If nothing else ... just out of respect for those who gave you that advice, to begin with.
Godspeed and good luck. I am personally happy with what WM6 is giving me, without needing to push the boundaries to where they are obviously currently at a breaking point with 6.1.
But If you absolutely find you have a NEED for WM6.1, where it's been stated to be somewhat flaky right now on the Hermes, I suggest you deal with that flakiness. After you've TAKEN THE ADVICE GIVEN, if it still doesn't work to your expectations, roll back and move on.
Just my own $0.02.
-pvs
Hey isn't the "official HTC Rom" an official ROM?? Ill think it is an official non Big Storage.
Until yet no freezes.....
If it freezes i will flash an AT&T Rom first
Oll report back
cu
pOpY
rosebud said:
I found that I was having the same issues, phone hard reseting itself and all sorts, I did the following to resolve:
Flash to Official wwe Windows mobile 6.0 AT&T rom
update my hard spl to the latest,
replace radio rom
update to WM 6.1 image of choice,
this is supposed to be an issue witht he big storage roms screwing with the phones storage, flashing to an original rom appears to resolve.
Cheers
Steve
Click to expand...
Click to collapse
Ok, now it freezes again two times
Now i would try it your way.
Where can i get the AT&T Rom you have flashed?
thx
pOpY
popy2006 said:
Ok, now it freezes again two times
Now i would try it your way.
Where can i get the AT&T Rom you have flashed?
thx
pOpY
Click to expand...
Click to collapse
pOpy,
Try here: HTC's AT&T 8525 Support Page. It looks like the same ROM is still available.
Good luck in your endeavor,
-pvs
@pvs: Thanks for the link.
I hat couple of freezes in the last days. Now i have found some time to reflash the rom you given me the link. After that i would flash the 1.54.30.10 radio and the G&C rom from PDAViet.net.
Ill report back..
Thx for your help
pOpY
I have installed HardSPL-9. is this normal that my hermes hangs at 100% after flashing a rom????
The rom runs after flashing.
thx
popy
I have flashed the B&C PDAVIET Rom. I dont know if this is a bug of the rom, but no my Hermes takes about 10 secs to wake up from standby!!! Now ill miss almost every call
Please help....
thx
pOpY
pOpY,
As I had alluded to earlier, from following threads in this forum, it appears to me that the current WM6.1 ROM available is not yet ready for prime time. I have decided to remain happy with the 6.0 versions ... especially after reviewing the reports on exactly what has changed in 6.1 (not much).
Maybe it's time to honestly ask yourself if the currently available upgrade to 6.1 is really worth all this trouble.
Again, just my own POV here.
-pvs
I have the same problem with more than 6 different wm6.1 roms... it's a serious bug in wm6.1, all roms!
It seems that the wakeup bug is gone now. Just soft-Reseted my phone. Now it wakes up normally.
The wake bug i just have in the PDAVIET B&C Rom one time, now its gone (hope a long time )
In the other 19209 roms from PDAVIET i havent some of this wakeup bugs (just the other issues mentioned before).
I will report back...
cu
pOpY
Now it runs over 2 days, without a freeze
Will now install my software!
thx guys
pOpY
Now it runs for 1 week without any problems
Flashing the AT&T Rom first solved my problem!!
THX
popy2006;2137265 said:
Now it runs for 1 week without any problems
Flashing the AT&T Rom first solved my problem!!
THX
Click to expand...
Click to collapse
Great news pOpY,
Can you give a brief synopsis of what's improved in WM6.1 ... from your POV?
I'd love to hear what I'm missing out on by holding off.
-pvs
Hello All,
I ram the Hermes Shadow 2.1 ROM for almost 6 months and nothing was stabler than that, i finally upgraded (to AlmostNak3d Manilla v11)to get the keyboard fix during call on all the new ROMs and none of the ROMs have been any good to my device. The device after a day or so, just freezes and I'm unable to restart it, it just gets stuck at the boot screen, and sometimes appears as if it were Hard-Reset.
I've tried almost all of the new ROMs here and all of them have crashed on me. I'm going back to Shadow 2.1TE from Cloudyfa, and I'm hoping this gets fixed.
Is there a patch that I can use to get the keyboard during call fix on the Shadow 2.1TE wm6.1 rom? or is there a way to make my device stable on the new ROMs again? I dont know anything about cooking ROMs, so any help will be appreciated.
Thanks!
EddHead said:
Hello All,
I ram the Hermes Shadow 2.1 ROM for almost 6 months and nothing was stabler than that, i finally upgraded (to AlmostNak3d Manilla v11)to get the keyboard fix during call on all the new ROMs and none of the ROMs have been any good to my device. The device after a day or so, just freezes and I'm unable to restart it, it just gets stuck at the boot screen, and sometimes appears as if it were Hard-Reset.
I've tried almost all of the new ROMs here and all of them have crashed on me. I'm going back to Shadow 2.1TE from Cloudyfa, and I'm hoping this gets fixed.
Is there a patch that I can use to get the keyboard during call fix on the Shadow 2.1TE wm6.1 rom? or is there a way to make my device stable on the new ROMs again? I dont know anything about cooking ROMs, so any help will be appreciated.
Thanks!
Click to expand...
Click to collapse
flash a oem rom and then again the custom rom you want
this should solve your problem
Thanks, Could you give me a link to any of the 6.1 OEM ROMs? also is there a hotfix for the Keyboard bug during calls?
EddHead said:
Thanks, Could you give me a link to any of the 6.1 OEM ROMs? also is there a hotfix for the Keyboard bug during calls?
Click to expand...
Click to collapse
look at this post from Dr Puttingham
Thanks, the Shadow Roms working fine now. I did install HardSPL long ago, so shouldnt be a problem. Whats the best Radio ROM for Hermes in India? any guidance to the keyboard during call fix will be of great help. SHould I ry the original OEM ROM for WM5 which came with my HERMES?
EddHead said:
Thanks, the Shadow Roms working fine now. I did install HardSPL long ago, so shouldnt be a problem. Whats the best Radio ROM for Hermes in India? any guidance to the keyboard during call fix will be of great help. SHould I ry the original OEM ROM for WM5 which came with my HERMES?
Click to expand...
Click to collapse
The reason for flashing the shipped rom is to clear up any issues that the big storage roms can create, like hard resets. They are writing into areas of the flash memory that can get "confused" going from one big storage rom to another. So the stock rom will "freshen" it up.
As for the keyboard issue, I'm not sure.
Thanks, The shadow ROM seems to be working fine for me, the keyboard fix was done by Dillsnik & Fun_Key, and is incorporated into the later ROMs which are all Hard Resetting my device. I wanted to know if there is anyway to Hotfix this into the older ROM that i'm running. also the battery fix the same way.
Hi guys...
I like this forum, you can find so much stuff here, which leads me to my question for you, I have a QTEK 9000 (ripped a new and unused one from the internet) which I would like to upgrade to Windows Mobile 6.
I know where to find the ROM's and I read everything about how to upgrade, but, I am not so technical in the ROM know about, and before I mess up my beautiful QTEK.
I need some help with information about a good Windows Mobile 6 ROM i can use to upgrade, there are a lot of them, but I am unable to see which one is good and which is not.
I want to use a clean as possible ROM for that, non I-MATE or HTC stuff on it (if you get my drift), maybe I as to much, like i said before, I found the ROM's but can any one of you guys give me hand which one i can use, which is stable and works fine.
I don't use the QTEK as a phone, only as a mini-netbook with wifi :-D
Thanks to anyone responding to my thread here.
Regards, alexander-wolf
alexander-wolf, by stable I assume you mean that you don't want to see your phone freeze when doing important tasks/answering calls...etc? If this is the case, then I can only suggest to use the last WM5 rom from Swat4 found here : http://forum.xda-developers.com/showthread.php?t=409966
Or if you want WM6 rom, try Tomal's v8.2 and v7.7 - I've found them to be the most stable but at times, I had problems with phone freezing when new sms/mms/phone calls coming in.
I've switched back to Swat4's WM5 which has never let me down.
Thnx
@ Final5k
Thank you for your advice, I will give it a go (i allready made a copy of my original WM5 ROM just in case)...
Regards,
hi guys....i dont know anything about htc artemis...i mean...if needs some kiind of unlock...or etc....i want to flash a new custom or original rom... wm 6.5 or 7... or android if its possible...but i want greek language....can anyone help me.. pls..?
I need details pls...because as i said i dont know anything...the only experience i have is with the samsung galaxy s 2 that i own... thanks
If I remember correctly, you should at first unlock your Artemis with USPL. Stick to the instructions and nothing bad should happen.
Then choose a ROM from here and install it (there should be instructions how to do this in ROM's thread or in readme.txt).
You can't flash Android or Windows Phone 7 on this device - it's just too weak. Of course, there were some guys who tried to port Android, it booted, yeah, but only few things worked (calling and touchscreen :E, no wifi, gps, audio) and it was very slow.
There are some WinMo 6.5 roms, but I wouldn't recommend them - on my P3300 they were usable, fully working, but kinda slow, so I flashed back to 6.1.
Check some ROMs and choose the one that you think will work the best.
Oh. Remember: before flashing remove SIM and SD card, and after that, do a hard reset.
If you still have any questions or you're unsure about something, ASK. We will not kill you and you will not brick your Artem.
thanks my friend.....ur the best....i ll try it when i ll be in home.... of course i want full fuctions of the phone...gps..wifi and etc....so...i ll try 6.1...or 6.5...or 7.. XD but what about greek language...is there a hope to find something ?
Have a look on the forums, there are multilanguage ROMs here. I'm pretty sure you will find at least one with greek language.
Also you won't find Windows 7 roms, Artemis is too weak for this.
i was thinking about a little overclocking...so that it can run the os
thx man i ll check it.... another question...when i finish the unlocking...with uspl...i must flash the rom immediatle...i mean this process erasing the rom...or i can open it again with my old rom....and then flash a new rom..?
No worries, you don't have to flash new ROM right away. USPL just unlocks your phone, it doesn't delete your old ROM.
But you should make a backup of everything, like contacts etc. because flashing new ROM erases everything.
About greek ROMs - I haven't found any, but I found this: http://forum.xda-developers.com/showthread.php?t=336252
oooooooooooooooooooo my friend your the best....thats better....cause i can use it in every rom.... XDDD !!!
Well... I wouldn't be so sure about that. It's old and it may be not compatible with WM6/6.5. It's worth trying though.