Related
I upgraded to the new Orange ROM on my SPV M5000 (although with the radio 1.09) and even though I've now gone back (icons and taskbar were all messed up in VGA) to the Qtek (42.42.P8 1.13.64WWE this time with radio 1.09) the clock keeps reseting to midnight 1st august 2005 after every reset (eg a backup)
Very annoying. I've tried going back to radio 1.06 which I had before all this started. Anyone any idea what I can do about this? Where to start?
In fact it's not just the clock. Sound is dead too. I don't get anything from either the speakers or the headphone socket.
I've now tried complete original sets of roms ie the orginal Qtek and although the update progresses normally the clock consistently resets to 1st August, and I don't get any sound
Time to contact orange?
So the following isn't working:
On board sound (through speakers or wired headset)
Clock (ie everytime a reset occurs it goes back to Aug 2005)
Cameras
But the following are all working fine.
GPRS
3G
WiFi
Bluetooth (I even get sound through my bluetooth headset!)
I've flashed a few different roms and radio sets but what is/isn't working remains the same. Is there something about this spread of working/not working which can help narrow down the problem?
Someone please post something!
sorry mate, cant help, i dont have that problem.
personally, i would have done without the vga and stayed with the newer update.
just thought i would let you know people are reading, but if doesnt look like many if any are having this problem.
oh well, its now popped back up the list for you...
Sorry I should have been clearer. All this started when I put the new orange rom on my SPV M5000.
The clock has been bust since then, and even going back to the qtek rom I used to use hasn't fixed the problems.
Think I'll have a look at running linux on it (may help with diagnostics) if not I'll stick to the new orange rom and contact orange for support.
Broken Clock - Fixed
Just incase anyone is curious (ever has the same problem) this was "fixed" when I accidentally dropped my device again! Yes the answer is that this had nothing to do with Rom updates. There must just be a loose connection somewhere and a bit of a jolt has sorted it out!
Phew...but a big worrying that something is loose somewhere.
I have a Hermes that was running a March release of Black v2.x? Today, the microphone stopped working using the phone (or any app). I called Cingular, and they are sending me a new 8525.
In preparing my microphone-less 8525 for return to Cingular, I flashed the latest Cingular ROM (WM5). Viola, the microphone worked again. I then installed the Black 3.0.1, and the microphone doesn't work.
Does anyone have any suggestions to troubleshoot this? I haven't had any problems in the 2+ months that I've been running Black and haven't installed any new apps. Cingy is sending a new one, so I could just wait. I'm just interested in why this is happening as it doesn't appear to be a hardware issue with the microphone.
I'd almost rather not talk to anyone than return to WM5
TIA,
Blue
i only ran black 3.01 for about a week, but never experienced that. since then, i've jumped ship and gone over to custel's 2.5. it's way better imho. try it and see if it has microphone issues.
Thanks. I will do so right now. I'm perplexed as to why this is happening too.
I installed the CUSTEL 2.5 release, and the microphone does work, but it is very weak and unusable. I'll wait for my new phone to arrive unless you have any other ideas.
flash back to whatever is on htc's website and wait for the new phone. that's a weird issue.
Make sure you also flash to the original SPL, assuming you upgraded to Hard SPL.
The only difference that I could think about is that Cingular devices are a bit different, not having a frontvideo cam. It is odd but pherhaps this is the one?
Strange, I guess that there are more Cingular users here who flash Black withouta problem.
Had the same problem with my UK Vario II running black 2.5, tried a few radios and finally went back to WM5 and my old bootloader to send back for another phone.
Always assumed it was a hardware fault.
The video cam is the reason the microphone doesn't work?
I find that statement quite odd, since there is no correlation between the camera and the microphone.
I am +1 for it being a hardware issue and he's taking the correct action by obtaining a new device.
RonenB said:
The only difference that I could think about is that Cingular devices are a bit different, not having a frontvideo cam. It is odd but pherhaps this is the one?
Strange, I guess that there are more Cingular users here who flash Black withouta problem.
Click to expand...
Click to collapse
Got a new phone yesterday from htc. I had the same problem.
This is an old thread, but this happened for me with vp3g's 3.60 rom and schaps 3.60a rom too....not sure what the deal is as i like both roms a lot, but my microphone would stop working after being on a call for a little bit.
Anyone know how to fix this?
I also have a microphone problem, sometimes it seems to work and sometimes it doesn't, however a bluetooth headset works perfectly, also my wired headset's microphone doesnt work either
Hi all,
As many of you have heard (or experienced), many Hermes units seem to exhibit less than stable behavior with the production WM5 ROM, or even some of the cool ones here.
Browsing the other forum, we are all to familiar with:
1 - Camera taking black pictures
2 - SD Card not recognized
3 - System hangs
4 - Unit gets very hot and drains battery
5 - Using the alarms is out of the question due to reliability
etc.
After two months of testing, I have two choices:
A - Go back to my Wizard 8125.
B - Move on up to WM6, and see if these issues will be resolved.
My question for those of you have taken the WM6 leap is:
"If you have experienced annoying system hangs, battery drains, and so forth, with WM5, have these issues been resolved when you upgraded to WM6?"
I want so badly to stick with the Hermes, and I'd love to learn all about the various WM6's ROMs... But not if this unit will be as unstable as before.
Any quick thoughts would be appreciated.
I'm ready to hit this forum and the wiki, and learn all there is to know about WM6... but NOT if this unit is still going act up.
I eagerly await your quick replies!
To be honest, I think WM6 is more stable overall compared to WM5 on my 8525.
I also have an 8125, and I have WM6 on that as well. The differences in functionality and the nice new interface are well worth it. The key (in my opinion) is to pick a ROM without all the extra 'garbage' added in, and be careful about the 3rd party apps you add. The core OS is very solid.
Generally speaking WM6 is faster with less hangs.
My only gripe with it is that after you have about 300 sms messages, typing gets slow .... like really delayed ... to solve this i turned the Autospeller thingy off, and it seems to be working flawlessly now!
Compatability is great, it actually just WORKS! .... *cough* most of the time *cough* ... no seriously it rarely hangs, and only the really old applications don't seem to run.
Alarms, christ don't get me started ... i personally just add a calender entry, with the alarm function turned on, it always works and reminds me 15 mins earlier than the desired time
My unit only gets hot while in my pocket a lot or while charging ... i have radio rom 1.41 and the battery life is good, but not as good, i advise 1.40 (for my device it worked best)
SD card not being recognised? never had that problem with WM6
Camera taking black pictures? ... well moving it out into the light generally helps, but out of 300 pictures so far none have been black!
i've also noticed that boot times are slightly quicker
and using IE is MUCH faster and smoother
WM6 is more visually pleasing and is smoother with less hangs. I'm using Sleuth's VARIANT of LVSW ... and its good, i'm an anti-black guy, Black just doesnt do it for me, too unreliable (IMHO!) but well done to JJ for it all, i'm not knocking him, just my personal experience
dropped calls or missed calls are a thing of the past with WM6, i suffered SO MANY during WM5 ... also the lack of OEM images is good, byebye orange customisations horay!! (backup your extended rom 1st, it might be useful later on)
i completely agree with the above statement.
WM6 is great. Haven't had any problems with it. but choose your ROM carefully. I use LVSW, and tried Black Dymond. Both were great, i personally had better luck with LVSW. Radio 1.41 seems to be working well for me, I haven't tried 1.40, so i can't speak to the battery life. make the WM6 jump. you won't be sorry.
WM6 works for me
I had some of the problems you described with WM5 that came with my JASJAM. I have since upgraded to WM6 using the Elf version of LSVW. It works very well for me so far. The only thing to watch out for is that after installing the WM6, it somehow changed the device id and my WebCamera Plus app would not activate anymore. I have to call the Ateksoft to issue me another activation code.
bchau said:
I had some of the problems you described with WM5 that came with my JASJAM. I have since upgraded to WM6 using the Elf version of LSVW. It works very well for me so far. The only thing to watch out for is that after installing the WM6, it somehow changed the device id and my WebCamera Plus app would not activate anymore. I have to call the Ateksoft to issue me another activation code.
Click to expand...
Click to collapse
There's always going to be these small problems with an upgrade, but i think it's still agreed that WM5 < WM6
Hey hey!
These first five posts are VERY encouraging!
I am starting to get excited about it now...!
I'll wait to see who else can offer their opinions.
Thanks guys for the great news!
Michael_514 said:
Hey hey!
These first five posts are VERY encouraging!
I am starting to get excited about it now...!
I'll wait to see who else can offer their opinions.
Thanks guys for the great news!
Click to expand...
Click to collapse
No one elses opinion matters.
My only regret with WM6 is not taking the plunge sooner. See my signature for my configuration.
I am using black dymond 3.5 for past two weeks now and so far it's just rock solid and fast. No hang ups. Quick response to buttons / commands. No drop calls. Smooth operations. Nice visual interface. No complaints what so ever.
My prior cingular rom was stable but too slow and clumsy.
Anybody who is confident in performing upgrade should do it especially as now the risk of bricking the device is very low with Hard SPL 2.10 Olipro.
My 2 cents
Michael_514 said:
Hi all,
A - Go back to my Wizard 8125.
Well, I must say that my experience has been awsome with many of the roms on my 8525 especially JJ's stuff, yes I am a devoted black follower . My experience with the wizard or 8125 was horrible, never modified it at all so i don't know how it does otherwise but I thought it was a piece of ****e.
In conclusion my advice is go wm6 and you will have a new addiction. It is faster, more memory and of course the many other perks like when you get to show your friends that your already runnin wm6 and their stuck with 5
Just follow the steps hard spl, radio then rom and you should be just fine.
I almost forgot, the only times I have experience problems/ instabilities was when I installed things to storage card rather than main memory.
Click to expand...
Click to collapse
I have SoftBank X01HT... I've just upgraded my ppc to Black diamond 3.5 and it works perfect... But I still had the same problem with capturing image in the dark place and it comes up with black picture.. the flash doesn't help at all.. it seems like it's not functional... I hope someone could help me with this... Any Advice? Please feel free to tell me.. I'm waiting.. thanks in advance....
Okay, guys!
I am sold!
I will do my readings; check out the various ROMs, and away I go!
And of course, Hard SPL is a must!
And I agree with the post a few posts back... I am all for a less bloated ROM.
I use my PPC for very specific tasks (Adobe Reader, Outlook, GPS, phone,voice command)... and the less junk/crap/freeware/shareware/malware/utils/bloatware/games I have installed, the better.
I will do some investigating, and I shall take the plunge!!!
Thanks!!!
Michael_514 said:
Hi all,
As many of you have heard (or experienced), many Hermes units seem to exhibit less than stable behavior with the production WM5 ROM, or even some of the cool ones here.
Browsing the other forum, we are all to familiar with:
1 - Camera taking black pictures
2 - SD Card not recognized
3 - System hangs
4 - Unit gets very hot and drains battery
5 - Using the alarms is out of the question due to reliability
etc.
After two months of testing, I have two choices:
A - Go back to my Wizard 8125.
B - Move on up to WM6, and see if these issues will be resolved.
My question for those of you have taken the WM6 leap is:
"If you have experienced annoying system hangs, battery drains, and so forth, with WM5, have these issues been resolved when you upgraded to WM6?"
I want so badly to stick with the Hermes, and I'd love to learn all about the various WM6's ROMs... But not if this unit will be as unstable as before.
Any quick thoughts would be appreciated.
I'm ready to hit this forum and the wiki, and learn all there is to know about WM6... but NOT if this unit is still going act up.
I eagerly await your quick replies!
Click to expand...
Click to collapse
Hi, I have similar problems. I am trying to find out what's going on and the symptoms are like you say: battery drains too fast. Let's say it the battery gets hot, there's something wrong. If you measure the current usage with ACBPowerMeter you will see a high load, like 300-400ma, even with all stuff off, radio off, wifi off, incoming beams off, bt off etc, nada. Now, if you pull out the battery, leave the device the some hours, then start again, power it up, activate GSM and everything, you should be luck and see a current of maybe as low as 30-60ma, even with full brightness on the display. And one time it was okay the whole day, but then all of a sudden, maybe after I hooked up with Activesync or got an SMS, it's gone bananas again.. sigh.. There's gotta be something strange that's completely wrong. I've tried many radios no difference, I've tried bandswitch to limit to GSM only as I live in a area with maybe not super quality 3G signal, did not sort out the problem yet. I had WM6 from LVSW 19-05-2007 with all kinds of radios, then moved on to Pro Black, same problem, but will no try black dymond as someone else mentioned problem was gone with that ROM.
Please all, anyone else with these problems? Any good ideas what this can be? If the device is off for a long time, and I mean off as in battery pulld out, what difference does that make to having the battery off a short while, let's say some minutes? Is there some memory-stuff here? My device is just a week old, never wanted to use a native language WM5 that was in it, hoping this problem will be fixed..
thanks
Update:
I happened to purchase a faulty device!!! There was indeed a HW error on my brand new device so I got it swapped with another one that works. Not all problems are SW-bugs..
I use WM6 on both my 8525's without significant probs; battery drain seems less with radio v.1.38 than 1.40 or greater although use Band Switch to keep phone on GSM when not cruising the net; initial boot up is faster; I've not had overheating probs, no micro SD card issues . Wish I'd gone to WM6 much sooner, but I think having the Cingular 8525 makes a big difference as well.
My battery gets hot and discharges too quick even with radio off. I've tried all radios, am at 1.34 now, will try the 1.43 later tonight if I am able to fully charge battery quick enough... The thing is, if I remove battery for some hours and start over, it's okay, 40ma, radio on etc. Then, at some random point in time, the phone can just lay on the table untouched, it starts consuming battery as crazy, 300-400ma, measured by ACB Power Meter. It's dricing me nuts... I've tried to kill processes, to watch what's going on... I don't have a clue yet, except from there's something "running wild"..
Update:
I happened to purchase a faulty device!!! There was indeed a HW error on my brand new device so I got it swapped with another one that works. Not all problems are SW-bugs..
Hi all!
Okay, I am taking the plunge!
I think I'll stick with Radio 1.40, which I have instealled. Hard SPL is also installed...
...so, the only decision is to figure out which ROM!
I have rounded the choice down to two, based on what I've read.
I'm either gonna go with LSVW or Elf's version of LSVW.
Both are downloaded and sitting on my hard drive, ready to roll.
I just hope I can still use PocketMirror; iGuidance; and spb Pocket Plus.
We shall see!!!!
Any final suggestions are welcome!!!
Thanks!
What have you got to lose?
Just follow MrVanx's guide and enjoy it.
Unwired,
You actually bring up an EXCELLENT question!
"What have I got to lose?"
The simple answer: Time!
As much as I enjoy my hobby that involves tweaking PC's, PocketPCs, laptops, gadgets, and so forth...
...I am an attorney and I do run a business.
This means my time is very important and quite valuable to me.
For every hour I spend tweaking; resintalling apps; customizing e-mail settings; testing the phone; resyncing my business contacts with PocketMirror; researching the proper registry hacks....
...that is an hour I lose making MONEY!
So... As much as I would lllllllove to play with and test single new ROM and its variant, and as much I enjoy spending my day enjoying playing with the latest and greatest operating systems...
It kills me when I can't service clients, and when I can't run my business, because I am busy YET AGAIN(!) resintalling my PocketPC.
That's why I love getting opinions before I move ahead...!
So there ya go... I have no time to lose!
GilesTheAlmighty said:
Generally speaking WM6 is faster with less hangs.
My only gripe with it is that after you have about 300 sms messages, typing gets slow .... like really delayed ... to solve this i turned the Autospeller thingy off, and it seems to be working flawlessly now!
Click to expand...
Click to collapse
Now i have arround 700 sms in the Inbox and about 500 in sent items, and typing works good for me, with autospell on... i keep copy of all SMS i send/receive since i get my first pda, my loved Wizard...
GilesTheAlmighty said:
Alarms, christ don't get me started ... i personally just add a calender entry, with the alarm function turned on, it always works and reminds me 15 mins earlier than the desired time
SD card not being recognised? never had that problem with WM6
Camera taking black pictures? ... well moving it out into the light generally helps, but out of 300 pictures so far none have been black!
i've also noticed that boot times are slightly quicker
and using IE is MUCH faster and smoother
WM6 is more visually pleasing and is smoother with less hangs. I'm using Sleuth's VARIANT of LVSW ... and its good, i'm an anti-black guy, Black just doesnt do it for me, too unreliable (IMHO!) but well done to JJ for it all, i'm not knocking him, just my personal experience
dropped calls or missed calls are a thing of the past with WM6, i suffered SO MANY during WM5 ... also the lack of OEM images is good, byebye orange customisations horay!! (backup your extended rom 1st, it might be useful later on)
Click to expand...
Click to collapse
Really the difference is not only the ROM you use, but what you do with the ROM...this causes ppl talking about one ROM so quick and other ROM so slow, if you take a search, someone (don't remember) make a speed test after HR every ROM, and the results shows the ROMs aren't so different.
Of course if you havn't time for this, this isn't your forum
Regards.
Hi all.
I have recently flashed my Herm to have the fantastic Black MAJIK rom. All went very well and I was pleased with the rom. I did have issues with the wireless not working and also with the blank screen detailed below.
When HTC released the update for WM6 for the TyTn, I decided to flash to that rom and give it a try. Again, works well, although I had to flash back to Radio 1.38 to get the Bluetooth to work properly with my Jabra headset. (I am on Orange in the UK - have not tried 1.43, as could not find it!)
The big problem is this :- randomly (could be 6 hours, could be ten minutes), the phone does not wake up from sleep. The lights are still flashing (I have not tried calling the phone - I will do that next time), but it will not wake up. No ActiveSync at all.
Soft reset is the only viable option.
Does anyone know a fix for this? (Yes, I have roamed through a number of forums and tried the link for 'DisableSyncSchedule', but that did not work.)
I have tried to re-flash the rom a few times, even soft-reset before the HTC stuff installs, stopped GPRS traffic and made sure that the IMAP does not connect. Whatever I do, the problem persists.
I have installed the following: HTC TyTn rom:
- SPB Diary
- SOTI Controller
- mfrazz CommManager
- WMG 3G Video Black Keypad
- GreenBatteryFix
- HTC X-Button
- Pimp my Black
I am loathed to revert to WM5, but if that is the only way foreward, then I might need to.
Any help would be superb!
One other thing
Sorry, meant to say that I am currently running with just the base HTC rom and nothing else installed. Let's see how that goes.
First, The radio should not have anything to do with bluetooth. This is the radio rom for cellular calls, not the BT radio.
BSoD question: Do you have a media card? Have you installed apps on the media card? There have been issues with the media card falling asleep. I had issues in the past installing applicaitons on the card. As make sure that you configure mail NOT to store messages on the media card.
Next....Uninstall all applicaiton that you have installed. Do you still have the problem? IF this fixes the problem, reinstall apps 1 at a time untill you figure out which is causing the problem.
I do have a memory card installed, but no apps are installed from it and the mail attachments are not stored on the card but in the memory. I have recently reset the mobile and have noting installed (not even ext rom) and have only set up mail, sync'd and configured for Orange.
Interesting about the radio having no affect, as it made the Jabra work - no other changes made. (I have re-flashed since then, but still using 1.38 radio rom.)
So I get this all the time, I don't have an SD card - so its not an SD card issue.
I've got 2 Tmobile MDA Vario II's and ever since upgrading from the stock Tmobile rom the phone will hang with a black screen but the message light will blink. If I put the phone in flight mode it never does it.
Its happened on the following roms:
XDA Mobile / Faria's rom
All the Black roms
LVSW
It didn't do it with Tmobile WM5 Rom. Tried various radio updates and it doesn't seem to make any difference. I know Jasjammin mentioned he had seen it but nothing further from him on this.
ITS DRIVING ME NUTS
Some other people must be seeing this also? Please help. When it happens no mails/sms or voice calls so its like the phone is switched off. I too am now looking at downgrading back to WM5
I'm wondering if it might be in the boot loader / rom flasher issue? But I sure I've not done anything others haven't done.
Regards,
Neil.
Bump - nobody else seeing this? Find it hard to believe?!
prophetuser said:
....The big problem is this :- randomly (could be 6 hours, could be ten minutes), the phone does not wake up from sleep. The lights are still flashing (I have not tried calling the phone - I will do that next time), but it will not wake up....
Hi prophetuser
I did notice this issue in the new HTC WM6 ROM (not the dopod one) which you have mentioned. But I flashed my ROM to Black Majik and its cool....I didnt notice this problem.
My device is imate JASJAM. I think the black majik ROM is better, but I noticed one more post in this thread mention all black ROM had the problem as I have not come across it yet.
Maybe the new Black Satin which jasjamming is cooking will not have it and probably you may have to try it, until a new HTC ROM update is leaked I suggest you to use black majik.
Click to expand...
Click to collapse
read my post
100% solution
SOD CAUSE
IN my whole 6 months having my hermes i had never had SOD until i flashed the official dopod rom with matt kitchen. when I traced the source that SOD had came from it was a bad extended rom flash i done. This cause the device to go sleep after the screen time out, and also if i put the phone in idle mode i had to soft reset everytime.
i flashed an original operator t-mobile rom with the extended rom and all my problems went away.
My device has never been quicker no more SOD and battery life is superb with the new radio 1.47 after one whole day with normal use with 3g internet I am still on 70% battery life.
Now I have the perfect device and i think hermes WM6 crave and addiction will be thinned out as there is not much you can do now with the hermes as to wait for PROTON or fully integrated touchflo working ROM.
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
duttythroy said:
....i had never had SOD until i flashed the official dopod rom with matt kitchen. ....
What is SOD? please mentione as I am new to the terminologies
Click to expand...
Click to collapse
SOD= Sleep Of Death
Definition of SOD
1. A piece of dirt and grass, usually found stuck to the bottom of shoes after running (Or walking) On a muddy field.
2. Short for "Sodomy", meaning anal sex, which comes from the Sodomites of Sodom. This term, usually used in a derogatory manner, can be used to say **** off, as in "Sod off" or it can be used as an adjective "That sodding bastard"
3. An idiot, a fool. Someone you dislike.
4. S(Screen/Sleep) O(of) D(death) - Blank screen nothing happens..
Examples
Man, all this sod was stuck on the bottom of my shoe, and even worse, it dried out and now it's hard as a rock!
Look at that sodding bastard over there, scoping out girls he doesn't even have a chance with when they're drunk!
F'ing sod spilt my drink, and i wasn't having any of that!
Arghh FFS !! Me blinkin phones crashed again, I soo hate you SOD's.
loool ripdool . nice definitions
duttythroy said:
IN my whole 6 months having my hermes i had never had SOD until i flashed the official dopod rom with matt kitchen. when I traced the source that SOD had came from it was a bad extended rom flash i done. This cause the device to go sleep after the screen time out, and also if i put the phone in idle mode i had to soft reset everytime.
i flashed an original operator t-mobile rom with the extended rom and all my problems went away.
My device has never been quicker no more SOD and battery life is superb with the new radio 1.47 after one whole day with normal use with 3g internet I am still on 70% battery life.
Now I have the perfect device and i think hermes WM6 crave and addiction will be thinned out as there is not much you can do now with the hermes as to wait for PROTON or fully integrated touchflo working ROM.
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
Click to expand...
Click to collapse
hi mate, is it possible for you or someone else to give more specific instructions to do this? I am running Sleuths rom which i am v happy with apart from SOD every now and again in the mornings when the phone has not been used for hours whilst i have been sleeping!
thanking you in advance.
yans.
I have had a scout around and no one seems to have this problem so thought I would run it by you all..
I was using Schapps WM6 ROM (6.0) until a few weeks ago when I decided to upgrade to a Kaiser. I decided to reflash the Hermes ROM to T-Mobile UK's official WM6 ROM so that I could flog it. Now the camera comes up with no picture but Green lines. The picture reacts when the camera moves so it can't be the hardware - could it be a driver issue?
A hard reset does not work. Before I attempt a different ROM, I wondered if anyone else has this issue or had come across it.
See the JPG.
Cheers
p.s stuck the thread here in the WM6 forum because I think its s/w and therefore ROM related.
believe me, its hardware related...
probably try cleaning the camera contacts (if thats possible)...
It's for sure no software issue...
you should look after a take apart direction and follow it to clean the contacts...
Regards
Thanks, after a change of camera software and ROM it still shows. T-Mobile give two year warranties over here so hopefully they will repair to free of charge. Although if I can get into the handset without them finding out it will be much easier if I can fix it myself - HTC are not that good at admitting to faults with their products.
dpswatson said:
I have had a scout around and no one seems to have this problem so thought I would run it by you all..
I was using Schapps WM6 ROM (6.0) until a few weeks ago when I decided to upgrade to a Kaiser. I decided to reflash the Hermes ROM to T-Mobile UK's official WM6 ROM so that I could flog it. Now the camera comes up with no picture but Green lines. The picture reacts when the camera moves so it can't be the hardware - could it be a driver issue?
A hard reset does not work. Before I attempt a different ROM, I wondered if anyone else has this issue or had come across it.
See the JPG.
Cheers
p.s stuck the thread here in the WM6 forum because I think its s/w and therefore ROM related.
Click to expand...
Click to collapse
i have the same problem on spv m3100 and i am desperate!i don't know how but after sometimes and a lot of try suddenly the camera make good photo but after i put a new rom the prblem come again!did you think is from contact?i should open my spv?hmmm... risky operation
i can imagine it's form the contacts... but a hardware failure in general (camera related hw) is the most likely for this kind of symptoms... if i would be you i wouldn't open it, if i had warranty left ;-)
regards
after a lot of trying i decide to open my spv m3100 and take a look in it!so ...i open it i look at it clean it(although it wasn't necessary) and i reasembly the device!lucky me the camera wortk like a charm!i was very glad and i thought all my problem disapeared but..... after i doing first soft reset .......my camera show like in the bro attachaments!**** off!i was very unhappy and tried once again to fiox it!i decide to put radio version 1.51.00.10 (of course nothing happend) and after that i decide to use the old russian trick(kick the ****ing device with a hammer)!herhehheheeh!you'll never belive me but it works!heheheh!old russian trick always work!from now on i decide not to make any soft reset until one of you discover what happend in fact!
please do not apply russian method on your device(esspecialy with a hammer) take it easy but hit the buster!heheheh!
i think i found the mistery!at least to me it works!
be attentive:
on the back of the phone on camera is a little bumb!i move it up and down several times and oups the camera works!i made soft reset and again camera dosen't work and i repeat those up and down manouver and camera begin works!i made this operations several times and everytime after that manouver camera works!i belive that is a mechanical problem on camera!i take a look at camera and also at photo and i see a little arch maybe is decalibrated and possible that is the cause!it dosen't release something don;t no for sure!see the attachement!if your device is in warranties go to service to solve the problem if not ....well try what i said!