i tried to open my Blue Angel's rear cover, did not do anything and put it back. then my pda lost everything like hard reset every time when i change the battery. anybody can tell me how to resolve it.
thanks.
andy
hmm... let me guess you're using WM2003?
that's because your backup battery is failing.
try to upgrade to WM6 to solve that issue.
or you could buy and install a new backup battery.
hope it helps.
SilverSamurai said:
hmm... let me guess you're using WM2003?
that's because your backup battery is failing.
try to upgrade to WM6 to solve that issue.
or you could buy and install a new backup battery.
hope it helps.
Click to expand...
Click to collapse
thanks.
yes, i am using wm2003.but the backup battery shows 100%.
yup. we all have our batteries at 100%,
if it is on, it charges itself from the battery we put.
but our unit is old and for sure the backup battery is unpredictable.
there are only two ways you could resolve this problem.
1.) Buy and replace the backup battery
or
2.) Upgrade to WM5 or WM6... (you wont be dissapointed)
Thanks again.
I already upgraded my Rx66 to wm6 (using Helmi's ROM)last night. but the bluetooth cannot pair with me bluetooth earphone. anybody have solutions for this kind of problem? i checked the forum long time, but did not find anything.
thanks.
andy
Related
My backup battery got disconnected (i guess) after a slight fall... I'm a bit afraid of opening my pda, could someone tell me if accessing the backup battery is hard on the BA?
thanks...
EDIT: Sorry, thought it was another model. :-( Don't know with the BA
Hum, that's strange... it showed up again...
I'm using this rom:
BA_TMNL_14200_119_11300_Ship.exe
I found on my other PPCs the backup battery meter would disappear then just show up again.
Hello,
I've been a BlueAngel (SX66-Cingular Variant) user since a long time. It'd been working great. I re-flashed the original rom several times with the new BA updates/ roms from XDA's Ftp site and they all worked like charm.
ISSUE:
--------
Lately (since a month), I am experiencing some issues with it. It seems to be always searching for Network/ Service, all the time. An ongoing call will get disconnected. And very frequently i'll see a NO SERVICE notification. The NETWORK INDICATOR in the task bar will go to a High Strength and then Searching status. It is usually taking more than 30 mins to search the operator for me to make/ recieve any call. People trying to reach me inform me that my phone is Not Reacheable.
I've reflashed it to different BA ROM combinations but it didn't help.
I dont want to assume that it is a Hardware failure as i didnt do anything which can cause a damage to the instrument.
>>>>>>>>>>>>
What all can i try? What is the BEST SUITED ROM for this Device?
<<<<<<<<<<<<<
>>>>> ONE MORE QUERY :-
My Blueangel Back Cover Shows that this device is PH20B, but the ROM indicates that it is a PH20B1 Device. (This device is actually without a camera) Why do i see a difference here?
>>> USERS in INDIA or NCR Region: Is there any authorised/ recommended place i can get this device serviced?
Any help or suggestion is very much appreciated. Thank you all in advance.
- Harry
Sx66 is now Dead
Desperate to fix this problem, i pulled the battery to power drain the BlueAngel. I even went a step ahead and shorted all the power connectors (which connect to battery) of the device with help of a metal needle. I placed the battery back and now the set is dead!!
I just can't believe this. How can i get this device powered on now??
Thank you all for help in advance!
-Harry
cryptocoder said:
Desperate to fix this problem, i pulled the battery to power drain the BlueAngel. I even went a step ahead and shorted all the power connectors (which connect to battery) of the device with help of a metal needle. I placed the battery back and now the set is dead!!
I just can't believe this. How can i get this device powered on now??
Thank you all for help in advance!
-Harry
Click to expand...
Click to collapse
you screwed the battery buy a new one
xplode said:
you screwed the battery buy a new one
Click to expand...
Click to collapse
Really? How? I only Shorted the power connectors on the device (with the battery out!) and not the battery!!!
Really? How? I only Shorted the power connectors on the device (with the battery out!) and not the battery!!!
Click to expand...
Click to collapse
How shorted? Why did u do that? To fix Radio problems? U probably did a shortcut and you fried something in Phone...
soul_train said:
How shorted? Why did u do that? To fix Radio problems? U probably did a shortcut and you fried something in Phone...
Click to expand...
Click to collapse
This problem is resolved. I power drained the device and it is working again.
Can anyone please help me on the issue with radio?? Any help/ suggestion is greatly appreciated!
Thanks!
Harry
glad to hear that, try radio upgrade only, try radio version 1.13.1 from the ftp
Any other suggestion please......
Thanks Xplod! I have installed Radio 1.13.10 with 1.42 (T-Mob/NL), but this issue still persists. This device has become more slower and lazy in the past few months.
I am still mad at the phone function of this device. Once half of the battery is consumed, It wont even allow me to make/ recieve any call.
Someone on this forum please help. Is there any New ROM update from Siemens (>1.33 Rom) please?
Also friends, how is the stability of WM 2k5 on this device? Would you recommend installing it just to see if it fixes this issue?
One Last Question: What is the BEST ROM combination for this device? Also any customized Ext ROM with all the patches/ fixes included. Links to the location are greatly appreciated.
Thank you all again for your time and help!
-Harry
Hello
For last few weeks I experience very odd problem witch my clock and date in my Xda Orbit. Each time I change the battery (I use two batteries interchangeably) the clock and date reset to the factory defaults 12:00, 24 October 2006. However all other settings remain unchanged, I mean alarm, appointments etc.
I tried to perform hard reset but with no success.
I'm just wondering if there is any other battery which keeps clock and date alive.
Please if anyone have an idea or suggestion how to sort it out I would really appreciate.
Tahnks
RAfal
I just noticed that there is a post regarding the same problem. Sorry
Hi,
I don't have a solution for you. But I can recommend this tool:
SP Time Sync
http://www.spdialer.com/download/sptimesync23ce5_arm.zip
Have fun
Are you ever charging the battery whilst it is in the device? Or only separately in a battery only charger?
There is an internal battery, you can see it in the pictures in the Artemis Inside pdf file.
I have a feeling that battery is for the GPS unit's NVRAM to store almanac data and is not accessable to the rest of the device.
I think you will find this true in all artemis devices, could someone else try?
I have a feeling that the timekeeping is all in software and so when power is lost so is the time/date...
The device has flash-ram, why would you need a battery to keep the Almanac data?
I just took my battery off for 20 minutes and the clock was fine.
Sorry if I was wrong... I just assumed it would be nvram for the gps unit...
No need to say sorry chap, it is not a contest to say who is right or wrong or anything! I could be wrong, I really can not be sure.
Perhaps the OP should try charging his phone today to see!
Well I've also took the battery out and left it about 15 mins and it is 7 mins out of date...
If I leave it for an hour i think it will revert back to the factory date...
Orbit battery problem
One of my friend had the same clock resetting problem with his Orbit , he changed the internal battery to new one, it is working fine now.
Please try after changing the internal battery, it may solve the problem to you as well.
Does anyone know what type it is? A non-rechargeable button cell type thing?
mine does this aswell. it's annoying but it's easy to change back. if the battery is a non rechargable cell and if it can be changed for a chargeable one will the phone charge it?
Hi there all,
Seems that this post got some responses!
I posted up a few weeks ago about this issue (no responses though!) and then a few days later another poster did the same!
Now this post was put up and it seems as though it's 'common' but not widespread. Sounds asa though it is the internal battery thats causing the issue. I didn't know there was actually one inside but hey..!
Just off to a meeting now - will check back later and on subsequent days to this thread if theres any more things to try or fix etc...
cheers!
Dennis! West London UK!
Okay I'm having a problem with my TP2.
I've had it about 6 months now and had no problems until now. Earlier my battery died and now when I turn it on (after it being plugged it) It says Touch Pro 2 then just reboots. Does anyone have any idea whats wrong with it? I've tried taking out the battery leaving it a while and putting it back and i've tried taking out the memory card. Still nothing? Any ideas please?!
Thanks, Chris
ChrissehB said:
Okay I'm having a problem with my TP2.
I've had it about 6 months now and had no problems until now. Earlier my battery died and now when I turn it on (after it being plugged it) It says Touch Pro 2 then just reboots. Does anyone have any idea whats wrong with it? I've tried taking out the battery leaving it a while and putting it back and i've tried taking out the memory card. Still nothing? Any ideas please?!
Thanks, Chris
Click to expand...
Click to collapse
Have you tried to Hard Reset?
How do I do that? Sorry it's my first HTC phone and I have no idea?
ChrissehB said:
How do I do that? Sorry it's my first HTC phone and I have no idea?
Click to expand...
Click to collapse
While Powered off Hold Down the send, end and power button for about three seconds....Push volume up and it will restore to factory. You will lose all info.
I just tried that, it flashed on the screen with 3 colours and then it rebooted. :S Is my battery fried or something?
Thanks for the help
ChrissehB said:
I just tried that, it flashed on the screen with 3 colours and then it rebooted. :S Is my battery fried or something?
Thanks for the help
Click to expand...
Click to collapse
Make sure its charged and try again. after you hold down the keys it will propt you to push volume up to reboot. If it just keeps dying for no reason your battery could be shot, but could be a issue with the phone itself.
Okay thanks
I just tested something... When I've been testing this it has been plugged in. When I unplug it, it wont turn on at all, this is giving me the idea of a dead battery? Should I buy a new one? And whats the best battery to buy because I've looked and theres all these differen mAh ones?
Thanks
Have to found a solution/cause to your problem. My tp2 is constantly rebooting since morning. It wont event do a hard reset.
I had this issue (continuously rebooting) this weekend. I couldn't even get it to hard reset. Had to pull the battery out just so it wouldn't drain. I finally called Verizon for assistance. We did finally get it to hard reset (as described in previous post). They advised that if it happens again to call back and they'll replace it. Still don't know what caused it, and I'm ganna cry if I have to hard reset again! I suggest you call your carrier. If you're battery is already fried, they should replace it (after only 6 months).
I've had my TP2 (Rhod500 running Windows 6.5) for about four months. I've had intermittent issues with it restarting randomly, freezing, etc., but this was my first major issue. I really dislike this phone!
Hi guys! I badly need your help. My diamond does not go 100% full when being charged, it stays 60 to 75% only! It only gives me accurate status after i soft reset it. The battery life seemed to be normal. I've been searching for the answer and i cant find it...Tested a lot of ROMS, radios, Hard SPL, and installed a bunch of CABS but all of them did not work. Please help me guys! I dont know how to solve this. Right now im using energy ROM black hd 8.32. I wish someone would help me. Thanks.
in my experience, it is a problem of the ROM, so just switch to another. you may try my combination: radio v1.00.25.05, rom
HTML:
http://forum.xda-developers.com/showthread.php?t=631268
hi
Thanks for your idea. I appreciate it. However, i have already tried a bunch of ROMS, yet nothing has worked. Also i tried to change/upgrade my radio and Hard SPL but same problem is showing. I hope there is solution on this. But i'll try finding another rom though... Thank you!
Pre flash...
OK try this as a test. plug the phone into the charger and wait until the leds pulse turns to all on. This means the battery has fully charged. Make sure your phones bluetooth, wifi and screen are OFF whilst charging. Once the pulse changes to all LEDs on press the power button and check your battery. If it's still not fully charged. Get ready to re-flash from your Storage. Run the phones battery down 1st Turn the phone off and let it charge then when all leds are on go through the MTTY flashing process and flash from your storage as it's quicker and will not drain the battery so much when flashing. After flashing you will have about 96% so will need to charge untill full. If this doesn't work You either have all the functions on like Backlight on full, all radio functions on; or you have a problem with the battery.
thanks djfuego. I really appreciate your help. I will try that as soon as i get the chance...I have to go over the mitty procedure since i haven't done it before. I wish I won't crash my phone. Thanks a lot for the advice! I'll give you the results soon.
Hi djfuego! I already did your advice. Did the mitty perfectly but nothing happened. Same problem occured. I even purchased a new battery. I might have choses the wrong ROM. i dont know...Im using the Jeev Sense Rom...I'll try other ROMS though.
Dunno.
This is the rom I'm currently using.
http://forum.xda-developers.com/showthread.php?t=649841
Always use roms designed for your phone.
thanks
What radio and Hard SPL are you using? Im using the unsigned hard spl 1.4 something. Which hard spl and radio can you recommend? Please help. Thank you! DO you think it might be the problem?thanks