Picked up a softbank X01HT today, my first WM device. It was lots of fun upgrading the Rom to Schaps 4.01 and getting bbconnect 4.0.0.91 working. Everything is great and this appears to be the device of my dreams!
One thing I've noticed though is that if I'm plugged into the USB to charge and activesync enables, the bbconnect service is blocked... likewise if I use the internet.
Any advice if these two scenarios can be overcome?
Thanks for a great community and awesome info!
You can't bypass it while utilizing activesync. As for the internet you have to use the browser that installs when you first initialize blackberry connect otherwise all other browsers will use your internet settings rather than the blackberry connect ipn. You may be able to configure it so that other applications use the bb ipn but since I no longer have my hermes I don't recall if you can. Maybe someone that has bbconnect with their hermes can chime in.
most, if not all carriers seem to not like multiple APNs running although WM6 can handle it.
What is happening is you are not using ActiveSync to surf, rather your mobile network, which shuts down the BN APN for your standard internet
The only time I am able to use both BBConnect and IE is when I am connected to WiFi. Somehow, WM6 establishes connection to WiFi access point and yet BBConnect is still connected to the BB APN.
Strangely I suddenly cannot access the internet at all, is there a way to force the browser to use my Rogers GPRS connection to access the web instead of the BB apn? It is staying on now even when I try and access the internet. Thanks!
Actually I figured it out. If I use the default browser in WM6 it goes nowhere but if I use the Internet Browser in the blackberry program folders I'm fine on the BB apn.
Related
Hi there!
Has anyone an idea, how to make the Wifi and the Blackberry GPRS
Connection work at the same time?
It drives me nuts, as i am turning on WIFI, the Blackberry GPRS gets
disconnected. BUT, in 99% of the cases it reconnects the GPRS within
5 seconds. So there is not enough time to connect to any WIFI AP.
As i want to sync via WIFI its very annoying.
I know i can turn of the Radio, so that GPRS is disabled, but then
i cannot receive any phone calls, thats NOT what i want.
Any ideas, anyone???
cheers
Darwin69
PS: i forgot: Using Blueangel MDA III from Austrian T-Mobile, with newest Austrian German ROM from T-Mobile (like the one on the xda ftp).
PPS: Thanx for the extrom unlocking tool, really good stuff.
I must admit, I've never had that problem, but I make sure that I close ALL applications before turning on the WiFi. It can take 10-20 seconds for the WiFi interface to estbalish a connection and get an IP address. During that time, the device will try and connect via GPRS when you launch email, internet explorer etc
Hi!
The great problem is not an application. the problem is the
blackberry service, which you cannot deactivate without loosing
all data and settings :evil:
thanks to t-mobile
cheers
darwin69
Ouch that could get expensive if you didn't realise - I'm glad I don't have blackberry services, just plain old POP3 & SMTP email
hi!
no it actually doesnt, because t-moblle has an extra gprs setting for the blackberry client. when you are connected with the blackberry gprs, there are no costs. on the other hand, you can only use the blackberry service with this gprs connection, no internet, nothing.
its really annoying. No one else any ideas about that ??? pleeeease :roll:
cheers
darwin69
Blackberry and GPRS
Hi,
just use a taskmanager like "supertasks" which supports starting and stopping of services. Go to the services tab and stop the blackberry service. Then you can use WiFi as you like and afterwards you just turn on the service again. Nice handling so.
Wolfgang
Up until the official AT&T release of WM6 I have been able to use Slingplayer Mobile on my 8525 (both WiFi and over the AT&T network). I recently updated to VP3g's latest. I am able to work fine over local WiFi, but not over the AT&T network. My thoughts are the it's part of the AT&T crack down on MediaMax users (which I am). I don't use it that much over the network, but was wondering if anyone else has this issue since upgrading to the 'official' release.
I have read on other forums that other users are having the same issue. Basically, when working over the network, I get to the 'Starting' and notice that the indicator goes from H to 3G after a few seconds...and then the message pops up.
Everything else seems to work fine, tho I don't have as much program space (20 MB vs 27 MB) as I did on VP3g's 3.0 version.
mac_fan said:
Up until the official AT&T release of WM6 I have been able to use Slingplayer Mobile on my 8525 (both WiFi and over the AT&T network). I recently updated to VP3g's latest. I am able to work fine over local WiFi, but not over the AT&T network. My thoughts are the it's part of the AT&T crack down on MediaMax users (which I am). I don't use it that much over the network, but was wondering if anyone else has this issue since upgrading to the 'official' release.
I have read on other forums that other users are having the same issue. Basically, when working over the network, I get to the 'Starting' and notice that the indicator goes from H to 3G after a few seconds...and then the message pops up.
Everything else seems to work fine, tho I don't have as much program space (20 MB vs 27 MB) as I did on VP3g's 3.0 version.
Click to expand...
Click to collapse
I use slingplayer with vp3g's newest rom. works no problem.
I have MediaMax too. wap.cingular works fine.
Run the disable proxy cab and try it then...
And make sure that your My ISP is set to wap.cingular with [email protected] pw. (for the mediamax workaround without using the MediaNet connection(which I believe has a built in proxy)).
But try the disable proxy...
Thank you for the response. I did try the disable proxy with no change in the result (it installs successfully, but Sling does not work).
I was not implying that it was anything to do with VP3G's version of the new OS...I'm sure it's something that I forgot to do.
I was thinking it might have to do with a recent upgrade from DSL Ultra to Xtreme (where you have a dedicated IP address)...so today I performed the Slingplayer internet access setup again. Tried to access via the AT&T network with the same results...
Locating
Connecting
Starting...
Starting...
Then after about 5 to 10 seconds it goes from H to 3G and and back to H and I get the SlingPlayer popup that says 'Cannot continue streaming due to weak connection. Please try again later.'
I have 3 bars, so I don't think it's the signal...I wonder if something needs to be setup on the DSL modem now that it has a dedicated IP address...
Thank you again for any suggestions.
mac_fan said:
Thank you for the response. I did try the disable proxy with no change in the result (it installs successfully, but Sling does not work).
I was not implying that it was anything to do with VP3G's version of the new OS...I'm sure it's something that I forgot to do.
I was thinking it might have to do with a recent upgrade from DSL Ultra to Xtreme (where you have a dedicated IP address)...so today I performed the Slingplayer internet access setup again. Tried to access via the AT&T network with the same results...
Locating
Connecting
Starting...
Starting...
Then after about 5 to 10 seconds it goes from H to 3G and and back to H and I get the SlingPlayer popup that says 'Cannot continue streaming due to weak connection. Please try again later.'
I have 3 bars, so I don't think it's the signal...I wonder if something needs to be setup on the DSL modem now that it has a dedicated IP address...
Thank you again for any suggestions.
Click to expand...
Click to collapse
Having a static IP should not change your upload speed on DSL. It does however mean that you don't have to enter the million digit finder id for the slingbox anymore, just put in your static ip with the proper port.
Have you always been in the same place when this happened? Always at home perhaps? or work? I'm thinking that it might be a tower issue....hmmm
You of course can use PIE and get on the internet no prob right?
Two bars of signal should be fine, I've gotten it to work on one bar of EDGE before (awful quality, and choppy) so it should work great with that strength..,,,
OK. Try this. From your house try to get on (from the 8525) and see if
1) Network lights on slinglink flash(if you have one)
2) Red lights on the slingbox come on/flash (red network should flash I believe; red led on the "u" should come on if connected
Sounds like you are connecting to the box, but losing connection after the handshake.
Go to www.dslreports.com and do an uplink speed test from your home network. Gotta rule out everything....
Hope this helps.
I had the same problem, but upgraded my slingbox to the next build and it is working again. I'm using a PC, and when I loaded slingbox on my pc it said a new version is available.
I've found someone with the same problem!!
My XDA orbit with WM6 slings fine within my home wifi network but doesn't work anywhere else over gprs or wifi.
Interestingly, it works fine outside my home if I share a wifi connection with my laptop but if the phone connects itself, I get the locating, then streaming then weak connection.
I guess it's an issue with the wifi connection on the phone but quite why it works on my home network but not anywhere else in the world is a mystery!
I have the latest software for slingbox.
All help gratefully received
Jon
Which Slingbox Mobile version are you using? Version 1.2 does not work on WM6 (unless you run the patch floating around here) and version 1.5 does.
Very strange
Very strange. Mine works fine with the ATT WM6 Rom. I have cable so I DNS. Every once in a while i get the issue you are talking about but I just soft reset and then the I connect no problem. In case you want to narrow it down...I use the following:
Slingbox Classic
Time Warner Cable
8525 with WM6 and slingplayer version 1.5
I have verified that the issue occurs whether I'm near home or 60 miles away, in either case going through the AT&T network. I do see the light come on my slingbox pro when the PDA says Starting. I've checked and I have the lastest versions for windows, mac, and mobile. I'm wondering if there is some issue with my router as I do remember having to reboot that a few weeks ago (you can see that I don't use the mobile version that much, but of course now I miss it).
I'll check on the router and let you all know. I did have 4 bars today when testing from home...and as I said it works fine via my home WiFi.
Thank you all for the support, it has been great!
Works fine for me w/ Vp3g 3.62
I have a standard vp3g rom w/ 1.54 radio. My Slingbox pro works fine w/ a 3G connection, but no so good w/ Edge (no surprise there.) I'm even running a wireless ethernet bridge to it - not hardwired. I can't explain why you are having any issues, but do confirm you have the latest ROMs on all your networking equipment, including the slingbox and your Router. Good luck.
Still no joy...wondering if I should re-install the OS...I installed Sling Player Mobile again, removed, then re-installed because I noticed that it wasn't listed under the program list via add/remove programs...I suspected that there was something with the last install...
I re-installed ActiveSync 4.5 on my PC because it was acting funny (would disconnect from my PDA with no message sometimes) that seems to be fine now...
I checked my router...it has a passthru setting for my Slingbox IP address and std port.
My DSL modem has IP Passthru to my router...
My only thought is to re-install the OS which has been a pain because I have Garmin Mobile 10 and have been reloading the maps each time so that they are available...I'll copy the garmin folder from My Device to my desktop, maybe that will remove this necessity...
Any more ideas let me know...
Thank you,
Tim
I ran the mobile speed test on DSL reports, at 400k it said 633/512/437 kbs, earlier in the day it said the file was too small. At 1 MB I got 574/454/499 kbs, earlier in the day it was 791 kbs.
I'm in south Florida, I'm using:
ROM version: vp3G 3.62.3
ROM date: 10/11/07
Radio version: 1.50.00.00
Protocol version: 32.83.7020.20H
SlingPlayer Mobile 1.5.0.98
SlingPlayer is loaded on 2GB storage card. It was working with vp3G 3.60...and 1.50.00.00.
I reloaded the OS and with just sling player loaded on internal...still no joy.
I reset the DSL modem to factory settings and enabled IP Passthru for my router, no joy.
I even set my slingbox in the DMZ, no joy.
I'm wondering if it's something to do with my radio..1.50?
I have another option...besides DSL I have cable and may try connecting the sling box through that...
Any other ideas?
I've verified setup for internet viewing via my PC...
Just an idea... Try orb.com.
I stream my video via a connection to cable on my PC via Orb.
Mike
Interesting findings this weekend. As mentioned previously, I have internet access via cable modem and DSL Xtreme. I moved the slingbox, pc, and router over to my cable modem. Setup everything so that the PC could see the Sling locally and it works fine. When I try to configure for remote viewing, it does not work! I manually configured the router and still no Joy.
I then put the router and slingbox on the DSL LAN and reset the router to defaults (no port forwarding, etc.) Configure everything to work locally, then setup remote network viewing...sling setup thinks all is fine. I check the router...nothing has changed, no port forwarding entries, etc. So I manually configure.
I hook my pc up to the cable modem directly, get internet access and attempt to connect to the sling. It connects almost immediately and then sits on Optimizing for about a minute without any bars or activity going on within the viewer.
I'm wondering if this is a problem with my router...I can run speed tests with multi megabyte files without any issues...
My router is a d-link wbr1310..which used to work...but I guess it's possible that my problem has been discovered...any thoughts?
BTW, I down graded my radio to 1.48 prior to doing all of this and that didn't make any difference which led me to do all of the following for problem isolation.
Thanks for any thoughts...
Tim
Saw some earlier posts on this but haven't seen where anyone has figured out how to get the old WM5 wireless modem on WM6. Has that been done? For my applicaiton the new internet sharing simply won't work - or I haven't figured out how to get it to work anyway. I can connect to internet sharing just fine. I can get on the web and all works. However I have a tunnel application for my job that I need to use through the cell phone connection. When I start this applicaiton, the PC gives me the blue screen of death. It is repeatable. Doesn't happen with the WM5 wireless modem connection or any other connection to the internet I have ever tried - just this new internet sharing thing on WM6. I actually use the USB link so it isn't a bluetooth issue. Just something in the internet sharing that blows my PC up. Any thoughts would be appreciated - or a method to install the wirless modem on WM6. I'm using the standard ATT upgrade ROM - stock model.
Thanks.
I have noticed a few people posting about Internet Connection Sharing (ICS) problems with the fantastic new 6.1 ROMS. This is what I discovered:
I was mystified that Internet Sharing was showing as "Connected" on the smartphone but my PC would not get an IP address (some other people report this as getting 0.0.0.0 but that just means that it's not getting an address). Then I realized that my laptop already had an active Internet connection (through WiFi) when I was trying this. So, I disabled my WiFi connection, shut the phone off and then turned it on, and Internet Sharing worked!
I think this is why: I don't remember if this was true in the 6.0 ROMs, but in 6.1, when the phone is connected with the USB cable (and ActiveSync 4.5 is installed) the phone will automatically grab and use the PC's Internet connection. So in this mode if you do any browsing on the phone you are actually using the PC's Internet connection and not the GPRS. So when you try Internet Sharing it creates a "double sharing" problem that keeps you from getting an address on the GPRS network. I think this is a cool feature!
If there is no PC Internet connection then turning on Internet Sharing on the phone works. Now I'm wondering what would happen if I am WiFi connected on the phone. Will Internet Sharing in 6.1 give out the WiFi connection instead of the GPRS connection? Probably not - but it sure would be cool!
Anyway - this is my first post, and here is the signature that I plan to use here:
----- ----- -----
Kavana and Ricky are AWESOME!!! I love the 6.1 ROMs on my S620 (formerly TMobile Dash) and I can't thank you two enough for providing them.
Sharing phone's WiFi - not quite
So I tried sharing the phone's WiFi connection to the PC.
I know - why bother? Because it's cool!!! (Actually the phone gets really hot when WiFi is turned on.)
Unfortunately, it seems that Internet Sharing (on the phone) will only try to share the GPRS connection. It doesn't list WiFi in the Connect to... box. But it tries! In fact it gave my PC an address on the WiFi network, but it established the actual connection to the GPRS network. I tried turning the phone functions off but this just causes Internet Sharing to fail completely.
Oh, and a note: Internet Sharing will NOT work properly if you have the phone's WiFi turned on. This is because Internet Sharing will connect to the GPRS network but will give you an address on the WiFi network, which means that none of your traffic will route correctly. At least I think that is what's going on.
----- my xda forum signature: -----
Kavana and Ricky are AWESOME!!! I love the 6.1 ROMs on my S620 (formerly TMobile Dash) and I can't thank you two enough for providing them.
internet sharing implies pc/ppc sharing only right?
phil_white99,
That is very similar to what I am experiencing. I tried this past evening to disable the onboard network connections of my home pc before I attached my Dash. I then attempted internet sharing, and still only got 0.0.0.0s for an IP.
Have you been successful on sharing your Internet connection on multiple computers?
Don
BlueTooth was the problem.
I finally figured out that I could work around the problem by disabling bluetooth in the comm manager when I need to use Internet connection sharing. http://forum.xda-developers.com/archive/index.php/t-385825.html was what clued me in to the answer.
Accessing & Using the internet via USB
I have an unlocked HTC S620 & TyTN (Hermes).
When I connect the TyTN to the USB I am able to browse the internet as the phone uses the PC as a gateway automatically.Even if I do not setup a profile for activesync and the software recognises the device as "Guest". I am ceretain that this is the case and not accessing the service via the carrier or WiFi as I have enabled flight mode and been able to use the internet on the TyTN, browsing, using IM+ Mobile Mesenger etc.
I do not find the same functionality with the HTC S620 (T-Mobile Dash). Does anyone know how to get this functionality going?
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
indiekiduk said:
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
Click to expand...
Click to collapse
When you say partnership I asume you mean bluetooth.
I Turned on Flight mode and diabled bluetooth on the TyTN, connected it to the PC. Activesync came on and I cancelled setting up a profile so it was registered as guest. I got internet access via the usb cable connected to the PC. The same is not working for the S620.
I guess the distinction between the two is the TyTN is a Pocket PC and the S620 is a smartphone. There are various Ethernet Miniport Cards available for configuration on the TyTN. You find these under Settings>>NetworkCard>>Network Adapters. The one I find that shows up as connected is IEEE 802.11b/g Compatible Wifi Adapter, this I find strange as the device is in flight mode. The S620 does not have all the features and configurable network adapters under settings. Simply put a smartphone will not have all the networking capability of the Pocket PC
Let me know your thoughts please, or if you have another solution.
Here is how I got mine working.
1) Connect phone to pc.
2) Make sure ActiveSync shows connected.
3) Under ActiveSync Window select File->Connection Settings...
4) Change the "This computer is connected to:" setting from "Automatic" to "The Internet".
5) Under you phone go to IE -> Menu -> Tools -> Options -> Connections and make sure "Automatically detect settings" is enabled.
That's it. You should now be able to browse the internet through your pc connection.
Forgot to mention I am using ActiveSync ver 4.5.
Dash Internet Sharing Files on S720
On my HTC S720, there was no Internet Sharing option, even though it is WM6 unit. So after reading lots of threads on here and hofo, found out Blackjack had similar issue, as well as some WM5 devices running AKU 3 or higher.
So I copied intshrui.exe, intshare.dll and intshrui.lnk from Dash WM6 Rom dump, created relevant registry entries as:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\intshruiapp]
[HKEY_CLASSES_ROOT\intshruiapp\DefaultIcon]
@="tapres.dll,-14294"
[HKEY_CLASSES_ROOT\intshruiapp\SelectIcon]
@="tapres.dll,-14295"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING]
"0"="MSINTERNET_SHARING"
"1"="IntShrUI.exe"
"2"=dword:00000001
"3"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING\Session]
@=hex:00,db,4d,43,70,b9,c7,01
Then run intshrui.exe and while I can connect via Bluetooth PAN, I couldn't get any IP. I also tried a static IP and that didn't work as well. I investigated a little more, and found another key:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
"DisabledOnBoot"=dword:00000001
"EnableAddressTranslation"=dword:00000001
"EnableDhcpAllocator"=dword:00000001
"EnableDnsProxy"=dword:00000001
"EnablePacketFiltering"=dword:00000001
"PrivateInterface"=""
"PublicInterface"=""
"SetLastDhcpAddrToIEH"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing\Driver]
"Dll"="ipnat.dll"
"Flags"=dword:00000002
"Index"=dword:00000000
"Prefix"="NAT"
Then I copied ipnat.dll to s720. Here is the interesting part. If HKEY_LOCAL_MACHINE\Comm\ConnectionSharing exists, intshrui.exe will not connect, it will briefly grey out and come back to disconnected mode. As soon as I delete the key, it will setup USB or BT PAN and wait for connection (left soft key turns to Disconnect). I don't even have to reset the unit while making change to this key. Also, I left the HKEY_LOCAL_MACHINE\Comm\ConnectionSharing as empty, and noticed as soon as I run intshrui.exe, it will populate
"PrivateInterface"=""
"PublicInterface"=""
keys under ConnectionSharing key. I also tried to change various reg keys, such as HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms\IpEnableRouter to 1, and
[HKEY_LOCAL_MACHINE\System\State\Connectivity]
"InternetSharing"=dword:00000001
None helped as well.
Am I missing a file or reg key to make this work? I looked on my Dash for various keys/files but didn't see anything useful.
has anyone figure out how to get internet sharing on wm6?
Have a look at;
http://forum.xda-developers.com/showthread.php?p=1517183&posted=1#post1517183
I posted up the files and a .reg file taken from my WM6 Dopod 838, but I don't know if everything required is there. If anyone knows what else is required I'm happy to copy it from my device and post it here.
Would you mind posting ipnat.dll - it is missing from Blackjack II WM6..
Internet Sharing kavana's 080308
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
skf said:
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
Click to expand...
Click to collapse
I have fix this problem,and update XIP and SYS to 19202,i'll upload the new version later,just wait...
Thank you. I wait for new version .
btw With your rom I able to install and USE tomtom ,
with T-mobile Windows Mobile 6, I get incompatible with tomtom navigator arror.
http://forum.xda-developers.com/showthread.php?t=364685&highlight=tomtom
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing ----do not work for me ;(
6.1 Internet Sharing Problem *R.I.P.*
Has anyone figured out why Internet sharing NO LONGER works with any 6.1 roms that i flashed to? From Kavanas ROM s to Ricky's Remakes.
Is there a fix to this?
Can any of you "smarter" Gents or Ladies, look into this.
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators. might also have to do with the network connections on the pc. like i said in another post, i noticed a new network connection appears when you sync the phone, unlike in wm6.0. another thing is i would have problems with activesync everytime i flashed to a new rom without doing a uninstall & reinstall of activesync.
Se7eN43 said:
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators.
Click to expand...
Click to collapse
Shouldn't be operator issue. Worked great prior to updating to 6.1. (T-Mobile USA)
What rom are you using?
damn u were quick to respond. i edited my first post. im usin the new v15 rom. and tmobile is my operator.
ediit: i just messed with my settings and went back to how i had them before and now its not letting me do the internet share. hmm... this is not cool
Iv used V14, V8 and V5 and none of them allow my internet sharing to work. V5 worked at first but then stopped.
I really like 6.1 but I NEED that internet sharing
WHAT settings are talking of? that work for you?
INTERNET VIA USB PROBLEM SOLVED!!!!
ok i think the problem may be with activesync. like i said, in my second post edited, i had messed with the advance settings of connections menu, and reverted back and it stopped net sharin via usb. i noticed activesync gave me an error sayin somethin about not being able to fully connect but i was still able to browse my phone, also giving me a constant animation of the activesync icon, saying "connecting" never stopping when a full connection is establish. when i fixed this and the icon stopped turning and said "connected" i tried and it worked.
on a fresh install of the past couple of roms, this is what i did... (from an earlier post of mine)
this is what i did. use the "connection setup" in the accessories folder. choose country & operator. dont think it matters but i also selected "Enable Auto Configuration" under the menu.
in explorer, under "menu/tools/options/connections" Auto.Detect Settings is selected. under "Select Network" choose The Internet.
now go into ur phones "Connection" settings, select "GPRS". in my case, select, "T-Mobile WModem Link", under "Connects to", select The Internet. for other operators, guess look for somethin similar. now u should be able to share via usb.
one thing u might have to do is, delete whatever gprs settings u have now and power off and back on. then do the above.
sorry if this is so messy looking
Can you post the entry "seetings" for "T-Mobile WModem Link"
I manually entered my connections.
So i dont have the modem link