Related
Hi all, I have been trying out various WM6 crossbow ROMs recently but I need the Wireless Modem program .cab file if anybody can kindly upload it.
Wireless Modem is present in PDAVIET's ROMs but I have problem with it using AvantGo 6.2. Midget's WM6 ROM works alright with AvantGo but since it is a vanila build it doesn't have Wireless Modem.
I was told the new Internet Sharing does similar thing to Wireless Modem but I am more familiar with Wireless Modem. Can anyone out there help please? Thanks!
Have you even tried Internet Sharing?
It's really not hard to work out.
AlanJC said:
Have you even tried Internet Sharing?
It's really not hard to work out.
Click to expand...
Click to collapse
YES man i totaly agree with you....i was searching for this for long time with a lot of fails with the wirless modem...until i got the internet shsring i WM6...working graet
AlanJC said:
Have you even tried Internet Sharing?
It's really not hard to work out.
Click to expand...
Click to collapse
Thanks for the suggestion. Do you know any link on this forum explaining more about Intnernet Sharing? You know with Wireless Modem you put in *99# with a correct APN to initialize a internet connection. How do you do that with Intnernet Sharing?
When I was trying it the "Network Coonection" dropdown list is empty so I suppose I need to make a connection first. Is it the same number *99# to dial do you know?
It's been about a month since I tried it, I seem to recall it didn't matter what I entered on my laptop as it uses the specific connection you have set-up on your device.
Thanks guys!! I have just worked out how to use Internet Sharing through the "help" on the Universal.
For those who may also want to know how it is actually similiar to wireless modem. First create a internet connection and choose GPRS/3G type. Then it gets to the APN which is the same you can use with wireless modem, in my case it is orangeinternet. Job done!!
This connection will now show up on the list of the Internet Sharing connection. If you use USB and the Universal is connected, you will need to disconnect USB cable first, click connect on the Universal and plug the USB cable back. Same as when you have finished the Internet Sharing, otherwise the PC/Laptop won't recognize the Universal.
Who would have thought reading the help file would help
kevin.jiang said:
Hi all, I have been trying out various WM6 crossbow ROMs recently but I need the Wireless Modem program .cab file if anybody can kindly upload it.
Wireless Modem is present in PDAVIET's ROMs but I have problem with it using AvantGo 6.2. Midget's WM6 ROM works alright with AvantGo but since it is a vanila build it doesn't have Wireless Modem.
I was told the new Internet Sharing does similar thing to Wireless Modem but I am more familiar with Wireless Modem. Can anyone out there help please? Thanks!
Click to expand...
Click to collapse
Check this out!
http://forum.xda-developers.com/showthread.php?p=1252626#post1252626
I have a cingular 8525 (WM5, and updated from cingular) which can connect on my wireless at work, but when I want to connect to my personal wireless at home it cannot connect, but it does for unlocked wireless around my appartment.
There's nothing wrong with my wireless system, because my laptop can connect all the time.
It keeps telling me that the password is wrong, but it's right because it works for my laptop.
A highly trained friend in computers tried to fix the problem and he doesn't understand why it doesn't connect, even if i leave my wireless unlocked.
My wireless is from comcast and it's a fast cable-DSL.
I'm thinking to download WM6 and see if it gets fixed...
Any suggestion will be appreciated.
Thanks!
I've experienced that too. Here's how I fix my problem.
1.set in PPC as hidden network.
2. Turn on WIFI, delete existing connections, then add new connection and assigned new key ( I use WEP) and that's it.
BTW. Did you set MAC filtering on your Router. If you do , you need to add the PPC MAC address to the router....
Good luck
I agree with pl55, however maybe you should post this in the main Hermes forum as this forum is for questions related to WM6...
Just a gentle suggestion
Mate,
There a few of us who have had strange things take place with wifi on the HTC handsets. Me being one of them. My wifi at home is 100% stable when it comes to pc's yet when it comes to my handheld it is completely unpredictable - until...........
I have just upgraded my ROM (again) to Black Shadow and all of the issues have gone away. I haven't even had to do anything extra. So what does this tell me????? It tells me that there are certain things in certain builds that cause anomolys problems.
I would give a different ROM a shot. I can vouch for the Black series but I am sure the others are equally good.
Before you do all of that, you might want to see if your handheld is actually seeing your SSID (if its not withheld) by using something other than the wifi software on the handset. Try something like wififofum (great little app).
Good luck.
Hi,
I just upgraded my Hermes ATT 8525 from WM5 to the following WM6 version which I downloaded off of rapidshare site:
4. WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
Everything is working great, the upgrade was smooth and I was able to get all my data back and all that except for the WIFI connection.
I am able to connect to my Home Wireless Secured Network (SSID), and it shows that it is connected and has almost all the green bars showing excellent signal quality, but when I try to use Messenger or Internet explorer, it doesnt work. I am not sure why? Is it trying to connect using GPRS or cingulars Internet connection? If so, how do I fix it so that It connects using my home wireless connection. I do not subscribe to ATT/Cingulars Internet data plan etc,...
Any help will be greatly appreciated.... thanks
You should read the thread for this rom and ask your question there:
http://forum.xda-developers.com/showthread.php?t=317339
Thank you much! I posted my question under that post.....
Up until the official AT&T release of WM6 I have been able to use Slingplayer Mobile on my 8525 (both WiFi and over the AT&T network). I recently updated to VP3g's latest. I am able to work fine over local WiFi, but not over the AT&T network. My thoughts are the it's part of the AT&T crack down on MediaMax users (which I am). I don't use it that much over the network, but was wondering if anyone else has this issue since upgrading to the 'official' release.
I have read on other forums that other users are having the same issue. Basically, when working over the network, I get to the 'Starting' and notice that the indicator goes from H to 3G after a few seconds...and then the message pops up.
Everything else seems to work fine, tho I don't have as much program space (20 MB vs 27 MB) as I did on VP3g's 3.0 version.
mac_fan said:
Up until the official AT&T release of WM6 I have been able to use Slingplayer Mobile on my 8525 (both WiFi and over the AT&T network). I recently updated to VP3g's latest. I am able to work fine over local WiFi, but not over the AT&T network. My thoughts are the it's part of the AT&T crack down on MediaMax users (which I am). I don't use it that much over the network, but was wondering if anyone else has this issue since upgrading to the 'official' release.
I have read on other forums that other users are having the same issue. Basically, when working over the network, I get to the 'Starting' and notice that the indicator goes from H to 3G after a few seconds...and then the message pops up.
Everything else seems to work fine, tho I don't have as much program space (20 MB vs 27 MB) as I did on VP3g's 3.0 version.
Click to expand...
Click to collapse
I use slingplayer with vp3g's newest rom. works no problem.
I have MediaMax too. wap.cingular works fine.
Run the disable proxy cab and try it then...
And make sure that your My ISP is set to wap.cingular with [email protected] pw. (for the mediamax workaround without using the MediaNet connection(which I believe has a built in proxy)).
But try the disable proxy...
Thank you for the response. I did try the disable proxy with no change in the result (it installs successfully, but Sling does not work).
I was not implying that it was anything to do with VP3G's version of the new OS...I'm sure it's something that I forgot to do.
I was thinking it might have to do with a recent upgrade from DSL Ultra to Xtreme (where you have a dedicated IP address)...so today I performed the Slingplayer internet access setup again. Tried to access via the AT&T network with the same results...
Locating
Connecting
Starting...
Starting...
Then after about 5 to 10 seconds it goes from H to 3G and and back to H and I get the SlingPlayer popup that says 'Cannot continue streaming due to weak connection. Please try again later.'
I have 3 bars, so I don't think it's the signal...I wonder if something needs to be setup on the DSL modem now that it has a dedicated IP address...
Thank you again for any suggestions.
mac_fan said:
Thank you for the response. I did try the disable proxy with no change in the result (it installs successfully, but Sling does not work).
I was not implying that it was anything to do with VP3G's version of the new OS...I'm sure it's something that I forgot to do.
I was thinking it might have to do with a recent upgrade from DSL Ultra to Xtreme (where you have a dedicated IP address)...so today I performed the Slingplayer internet access setup again. Tried to access via the AT&T network with the same results...
Locating
Connecting
Starting...
Starting...
Then after about 5 to 10 seconds it goes from H to 3G and and back to H and I get the SlingPlayer popup that says 'Cannot continue streaming due to weak connection. Please try again later.'
I have 3 bars, so I don't think it's the signal...I wonder if something needs to be setup on the DSL modem now that it has a dedicated IP address...
Thank you again for any suggestions.
Click to expand...
Click to collapse
Having a static IP should not change your upload speed on DSL. It does however mean that you don't have to enter the million digit finder id for the slingbox anymore, just put in your static ip with the proper port.
Have you always been in the same place when this happened? Always at home perhaps? or work? I'm thinking that it might be a tower issue....hmmm
You of course can use PIE and get on the internet no prob right?
Two bars of signal should be fine, I've gotten it to work on one bar of EDGE before (awful quality, and choppy) so it should work great with that strength..,,,
OK. Try this. From your house try to get on (from the 8525) and see if
1) Network lights on slinglink flash(if you have one)
2) Red lights on the slingbox come on/flash (red network should flash I believe; red led on the "u" should come on if connected
Sounds like you are connecting to the box, but losing connection after the handshake.
Go to www.dslreports.com and do an uplink speed test from your home network. Gotta rule out everything....
Hope this helps.
I had the same problem, but upgraded my slingbox to the next build and it is working again. I'm using a PC, and when I loaded slingbox on my pc it said a new version is available.
I've found someone with the same problem!!
My XDA orbit with WM6 slings fine within my home wifi network but doesn't work anywhere else over gprs or wifi.
Interestingly, it works fine outside my home if I share a wifi connection with my laptop but if the phone connects itself, I get the locating, then streaming then weak connection.
I guess it's an issue with the wifi connection on the phone but quite why it works on my home network but not anywhere else in the world is a mystery!
I have the latest software for slingbox.
All help gratefully received
Jon
Which Slingbox Mobile version are you using? Version 1.2 does not work on WM6 (unless you run the patch floating around here) and version 1.5 does.
Very strange
Very strange. Mine works fine with the ATT WM6 Rom. I have cable so I DNS. Every once in a while i get the issue you are talking about but I just soft reset and then the I connect no problem. In case you want to narrow it down...I use the following:
Slingbox Classic
Time Warner Cable
8525 with WM6 and slingplayer version 1.5
I have verified that the issue occurs whether I'm near home or 60 miles away, in either case going through the AT&T network. I do see the light come on my slingbox pro when the PDA says Starting. I've checked and I have the lastest versions for windows, mac, and mobile. I'm wondering if there is some issue with my router as I do remember having to reboot that a few weeks ago (you can see that I don't use the mobile version that much, but of course now I miss it).
I'll check on the router and let you all know. I did have 4 bars today when testing from home...and as I said it works fine via my home WiFi.
Thank you all for the support, it has been great!
Works fine for me w/ Vp3g 3.62
I have a standard vp3g rom w/ 1.54 radio. My Slingbox pro works fine w/ a 3G connection, but no so good w/ Edge (no surprise there.) I'm even running a wireless ethernet bridge to it - not hardwired. I can't explain why you are having any issues, but do confirm you have the latest ROMs on all your networking equipment, including the slingbox and your Router. Good luck.
Still no joy...wondering if I should re-install the OS...I installed Sling Player Mobile again, removed, then re-installed because I noticed that it wasn't listed under the program list via add/remove programs...I suspected that there was something with the last install...
I re-installed ActiveSync 4.5 on my PC because it was acting funny (would disconnect from my PDA with no message sometimes) that seems to be fine now...
I checked my router...it has a passthru setting for my Slingbox IP address and std port.
My DSL modem has IP Passthru to my router...
My only thought is to re-install the OS which has been a pain because I have Garmin Mobile 10 and have been reloading the maps each time so that they are available...I'll copy the garmin folder from My Device to my desktop, maybe that will remove this necessity...
Any more ideas let me know...
Thank you,
Tim
I ran the mobile speed test on DSL reports, at 400k it said 633/512/437 kbs, earlier in the day it said the file was too small. At 1 MB I got 574/454/499 kbs, earlier in the day it was 791 kbs.
I'm in south Florida, I'm using:
ROM version: vp3G 3.62.3
ROM date: 10/11/07
Radio version: 1.50.00.00
Protocol version: 32.83.7020.20H
SlingPlayer Mobile 1.5.0.98
SlingPlayer is loaded on 2GB storage card. It was working with vp3G 3.60...and 1.50.00.00.
I reloaded the OS and with just sling player loaded on internal...still no joy.
I reset the DSL modem to factory settings and enabled IP Passthru for my router, no joy.
I even set my slingbox in the DMZ, no joy.
I'm wondering if it's something to do with my radio..1.50?
I have another option...besides DSL I have cable and may try connecting the sling box through that...
Any other ideas?
I've verified setup for internet viewing via my PC...
Just an idea... Try orb.com.
I stream my video via a connection to cable on my PC via Orb.
Mike
Interesting findings this weekend. As mentioned previously, I have internet access via cable modem and DSL Xtreme. I moved the slingbox, pc, and router over to my cable modem. Setup everything so that the PC could see the Sling locally and it works fine. When I try to configure for remote viewing, it does not work! I manually configured the router and still no Joy.
I then put the router and slingbox on the DSL LAN and reset the router to defaults (no port forwarding, etc.) Configure everything to work locally, then setup remote network viewing...sling setup thinks all is fine. I check the router...nothing has changed, no port forwarding entries, etc. So I manually configure.
I hook my pc up to the cable modem directly, get internet access and attempt to connect to the sling. It connects almost immediately and then sits on Optimizing for about a minute without any bars or activity going on within the viewer.
I'm wondering if this is a problem with my router...I can run speed tests with multi megabyte files without any issues...
My router is a d-link wbr1310..which used to work...but I guess it's possible that my problem has been discovered...any thoughts?
BTW, I down graded my radio to 1.48 prior to doing all of this and that didn't make any difference which led me to do all of the following for problem isolation.
Thanks for any thoughts...
Tim
When your PDA is connected to a wireless WiFi (not cellular) network, it is possible to "share" this connection with your PC. Thus you can browse the web on your PC by using the PDA's WiFi.
The connection sharing is done by two programs: WMTunnel and SerialTunnel. WMTunnel runs on the PDA and connects to the internet. SerialTunnel runs on a PC and acts as a "gateway" by accepting connections from your web browser and forwarding them to WMTunnel. Both are connected to each other via serial line (real COM port or Bluetooth SPP).
More detailed explanation: HERE
Really dont want to piss on your fire but have you seen chainfire's WMWifiRouter? http://forum.xda-developers.com/showthread.php?t=357152
As far as i know, wmwifirouter acts like a wifi access point and shares the cellular data connection.
My software shares the wifi connection.
Internet
WiFi Router is the best program to do what you want to do Go For It!
the dude means using your device as a dongle for maybe a laptop that has no wi fi
Gotta read the posts before responding. WifiRouter will not do what he's talking about.
I can't get it to work with WM5 SP and also does this work with USB to Smartphone instead of bluetooth?
Yes, it will work fine using USB. You can ignore the steps using Bluesoleil since that is for BT SPPIO.
Im trying to run WMTunnel but I get a error. This is on WM5 Smartphones.
And what's the port number for the USB?
snkchaos said:
Im trying to run WMTunnel but I get a error. This is on WM5 Smartphones.
And what's the port number for the USB?
Click to expand...
Click to collapse
Hi. Smartphone version will be available later.
It won't work over USB. (Serial port or BT SPP is required)
Run a search on this site for "INTERNETSHARING"
internet sharing...
http://forum.xda-developers.com/showpost.php?p=1949360&postcount=644
Awesome, it does exactly what it says on the 'tin'. I've just bought myself an iPod Touch and using this software, I can use my 3G connection on my HTC Trinity to download from iTunes or surf the net on the iPod, if I happen to be in a non-wifi hotspot. Its like have a 3G iPhone, before they are released and without the tie in to O2.
This thread is chalk full of stupid. It's as if nobody is actually reading the title of the thread or the first post. wtf?
Does anyone know if this is possible, sometimes my router decides to break all the wired connections, and just doesnt work for no apparent reason whatsoever, but the WiFi works fine.
It would be nice to still be able to use the 'net when this happens.
Cheers, Mike.
znos said:
Hi. Smartphone version will be available later.
It won't work over USB. (Serial port or BT SPP is required)
Click to expand...
Click to collapse
How is that smartphone usb version coming along?
New program?
sorry for resurrecting an old post...
Anyone write any new programs like the one Znos wrote about? Or does anyone have access to the old files?
I tried downloading from the my.opera link that Znos gave, but continuously get an "access forbidden" message.
Thanks!
what exactly are you trying to download that you get the error msg?
i downloaded the wmtunnel and serialtunnel_setup just fine
does anyone know if that be used as a wifi adapter for the xbox 360? it would be a good use for an old apache i have laying around
What link?
Those are exactly the files that I'm trying to download and am receiving an "access forbidden" message.
What download link did you use?
the only ones i saw... near the bottom of the page...
http://znos.hu/serialtunnel/serialtunnel_setup.zip