Related
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.
No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil
I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)
efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!
I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!
I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel
I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....
Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.
I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?
WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK
Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel
As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel
Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel
No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?
Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??
Hi,
maybe something im missing here but i was at a friends house the other day and he has a wireless access point set up (open with no encrption set up yet ...just for testing purposes). so basically he is broadcasting his SSID. I turned my wifi on my m2000 and it picked up his access point and showed me that my phone had connected, with the WIFI signal enabled...however i could not browse or use the net which tells me that i was not picking up an IP address...wats going on here? any clues?
thanks for any help
K
kadabra said:
Hi,
maybe something im missing here but i was at a friends house the other day and he has a wireless access point set up (open with no encrption set up yet ...just for testing purposes). so basically he is broadcasting his SSID. I turned my wifi on my m2000 and it picked up his access point and showed me that my phone had connected, with the WIFI signal enabled...however i could not browse or use the net which tells me that i was not picking up an IP address...wats going on here? any clues?
thanks for any help
K
Click to expand...
Click to collapse
if the AP's DHCP sevice is off,you can't get the IP automatically
The DHCP is dodgy on my belkin router, so I have each PC and my BA set up to use a specific IP address, rather than rely on the iffy DHCP.
You may find you need to input a DNS if you do it this way.. just copy one off a working PC
Forgive me if I am talking utter c#$* but if you have established a connection have you not been allocated an IP via DCHP? Just taking a step back from router problems, when setting up the wireless connection did you set up for work or internet profile?
simjo, what you say is prefectly logical, but I have seen cases (as the thread poster was suggesting) where a connection has been created, but no IP addy issued. At these times, no internet access etc is possible. i.e. connection is said to be active, but it is useless.
My solution for this problem was as I posted above, dont bother with DHCP. Set IP addresses manually.
I have a similar problem on a new M2000 (so I'm probably overlooking something)
I can connect my PC and laptop to my router (D-Link 614) on WiFi without any problem
The M2000 can "see" the WiFi but there is no connection
When I try to view pages via GPRS there is no response
When I try MSN Messenger, same again there is no response
I've tried several soft and hard reboots, but no difference
I also find switching the "phone" on is very difficult as I am warned to "The phone is off. Do you want to turn Wireless on"
I then turn Flight Mode on, but am then warned that Orange GPRS cannot connect
I have managed to make some test phone calls, but the menus seem to be taking me round in circles...
Any advice welcome
My Best Roms - WIRELESS PROBLEMS FIXED!!
XDA IIs UK from O2 - WIRELESS PROBLEMS FIXED!!
1. Best ROM so far without doubt for me is the BA_TMNL_14200_119_11300_Ship from T-MOBILE
AND its the fastest ROM ive ever used!
2. Best ROM (slightly slower)
XDA 1.42 115 T-Mobile Firmware (uses Radio 1.13)
3. I-Mates 1.40 WWE with Radio 1.13
still had an issue with audio dropping from incoming calls
If you've seen any of my previous posts you'll see the hell i've been in trying to get anything to work with these ROMS, now it ALL works. and I dont say that lightly!
i tried the last 2 factory ROMS from O2 UK 140.237 & 140.242 which is there latest and I had WIFI nightmares with both of those..
I must have spent 30 hours swapping ROMs and this is the best Ive found so far now. Seamless Wireless Hookup everytime! I have Rude FM 88.2 Streaming Live through my Linksys Router at 64k 44khz using Pocket Music 3.2 , Surfing the Net, even the GPRS is stil enabled with the WIFI signal, a special lead pipes the audio to my Amplifier it's been on all day playing variouse stations, Windows Media Player streaming well, even download Skype over the XDA and installed it.
Ok I have searched in this forum for my problem but no clear cut solution found so far.
I am really hoping that someone could help here.
My windows live messenger will only connect through GPRS/3G.
It will not connect through wifi/wlan no matter what.
I have tried all the different methods of changing connections to "My work network" as well as pressing the cancel bubble when it initiates the connection and nothing really works.
Does anybody know of any solution to this.
If not where can i get the old msn messenger from?
Thanks in advance
I dont think it's strictly true it only connects through 3g/gprs.
When my phone is connected to my PC via ActiveSync on the USB cable I can connect to Windows Live as well...
I do remember someone else reporting problems with WiFi though. Try looking back through older messages in this forum
Phew, at last someone is interested in looking at this.
I have tried signing in when I am connected to my PC and it worked. The connection bubble to GPRS came up and I cancelled right away so it used the PC to connect.
However WIFI is still impossible on my softbank. If anyone else finds an answer please share it with us.
You know, I have the same problem. Live messenger won't connect over wifi. However, my problem doing it is with my Wizard, not Hermes.
One thing I've noticed is that it seems to change depending on what ROM I flash to it. Meaning, I'll install one person's cooked version of WM6, and I can connect WLM without an issue over wifi. But I may try someone else's and that verion won't. So, my thought is that it may be a problem with either a specific build of Windows Live, or a specific build of WM6. Unfortunately I haven't been able to narrow it down to a particular one yet.
BT - WIFI interfirence
Try this on your Excalibur:
Establish connection with BT headset
Dial voice number
Activate WIFI at the same time
Did you hear any crackling and noise in your BT headset?
i'll try this a bit later when i get the chance, but isn't it common to have some interference if data is transmitting for both since they're both operating on 2.4ghz? also, what headset are you using? bt 1.2 should be better than 1.1
JwY said:
i'll try this a bit later when i get the chance, but isn't it common to have some interference if data is transmitting for both since they're both operating on 2.4ghz? also, what headset are you using? bt 1.2 should be better than 1.1
Click to expand...
Click to collapse
Well, I don't have this problem with TyTn.
I've tried Nokia BH 900 and Jabra JX10 - both 2.0
I'm glad i saw this thread. I'm having the same issue. I cannot stream music to my motorola ht820 bluetooth stereo headset if i use wifi. It just keeps stopping and freaks out on me. I was having issues streaming videos to my dash via wifi and using the headset also. I could not stream 100kbps videos over wifi! I thought the phone just wasn't powerful enough. (although it's not.. I could stream 300kbps videos on my old hp 3615 via wifi fine.)
I just was able to stream a video at 300kbps fine without bluetooth turned on using wifi and it worked fine. Grr!!
BT and wifi both use the same frequency.
I think you shoud try an other channel for the wifi. It may solve your problem.
Wifi how do you set IPs/DNS info?
did i over look something i can't figure out how to set IP, DNS and Subnet for my phone. I've gone to every connection screen did i over look something?
Internet via WiFi - Wireless Access Points Only
I am not subscribing to the data service on my cellular net. I only want to be able to access the net and email when I am in range of my WAP at home/work or at my favorite hot spots. I've got the WiFi settings so that I am connecting to my WAP and can see the SSID when it connects.. I've tried adjusting the settings in the IE options and am at the point where once in a while (1 out of 8 or so ) I can open access one page of a web site.. but can not navigate any further. If I type a different URL in it says locating and loading then times out.... what did I miss???
T-Mobile Dash / Re-ROM-ed to Excaliber.
All other functions seem to be OK.
Thanks, XmP
I've seen this as well. Playing around earlier today, I installed Opera Mini. Opera works fine over wifi or edge. I believe that the issue involves one or more IE bugs involving either the size (fragmentation?) of cache and/or scripts.
Also, Opera Mini isn't a solution (yet) either. It works great once installed and launched from the installer - but has to be uninstaller and reinstalled to work after you exit.
I can't wait for a linux port
I run into this problem all the time at my college and at my home. I turn on my wifi and the phone defaults to the network instead of wifi. I am on cingular with the 8125, I was using I/S PL 1.08 i just updated to cingular rom 2.24.10.1 WWE. I have tried IE, Opera, Mozilla (Minimo) and another i forget the name of. In all I preferred Opera but I feel Mozilla will be the best once the bugs are gone.
Oh yah and when I try and connect to the wifi network at my school they require a redirect to login through bluesocket. That is just too difficult for my little wizard and I rarely get through that system.
External antenna jack on Excaliber/Dash... is it just for GSM? or also WiFi?
Anyone had experience with the external antenna jack on the back of the Dash (under the mirror button)? Just wondering if using this connector would improve performance on WiFi? or is it designed only for GSM reception?
I found a cable which fits the connector perfectly. Thanks for your responses.
Issue solved!
I rebooted my wireless router and everything works great...
Bump!
I'm guessing the absence of answers means that the settings cannot be changed (or may need a reg hack to do so) - I can't find them anywhere either...
so it works for an external wifi as well?
yes, it is possible to change these settings (or at least the IP adress). I have read about it, but can't remeber where. It's possible to chnge it somewhere in the registry, can't be changed directly through settings. If I find it, where I read about it, I will post it here ...
As I remember the external is designed for car holder external antenna, not for WiFi. You may find at most of the GSM mobile back also have this.
This was posted over at howardforums too. What, you didn't search the internet endlessly to find an answer?
Above poster is correct, it's for GSM only. Like I said over at HoFo, unless you're lost in the backwoods, I don't think it's going to help much. Plus, it looks a tad silly!
Thanks for all your responses. Yeah, I posted the question in a couple of forums (the level of expertise varies widely, as you know!).
Reason I asked... we want to be able to access realtime weather conditions while at a remote nature facility on a barrier island here on the West Coast of Florida -- you know, like hurricanes There is a weak WiFi signal from an access point about 1/4 mile away. I simply wanted to establish a stronger link by using an external antenna.
So although it might have looked silly, it was to be a quick fix for instant weather updates (like radar), when needed.
Wifi connection sloooow. For you also?
Hi, with my stock htc s620, establishing a connection to a wifi network that is already saved (home & work), takes around 1 to 2 mins.
What often happens also is that it goes to sleep before even connecting (with me waiting in IE or mail to clic on a favorite or do a send & receive action).
I can't understand this since a nokia n80 will take seconds and it's almost instantaneous on my macbook.
Are there any tricks or software that can accelerate this (unless I'm the only one to have this problem)?
Seems to be a problem of your hardware or a configuration problem. I have energy save mode enabled and usually it takes two or three seconds to connect, sometimes up to ten seconds, if it has extremly low WiFi-Signal.
interesting, I'm going to investigate on the software part first... You really think it could be a hardware issue?
What's sure is that once the connection is established, it's fast and doesn't drop.
BTW, do you mean seconds after the handset is waken up from sleep?
Hum, after looking in my Remove section on my handset, nothing appears, is there some kind of registry cleaner for smartphone?
So I've been using the Tom coding package that installs the mobile Wi-Fi router with no problems until last night... now it keeps trying to connect to ISP.Cingular and then stops... it basically doesn't work now. I've tried to uninstall and reinstalled it dozens of times with no luck.
And yet... the 3G connection works because I can browse through Opera. So...?
OhI might add that I can turn on the Wi-Fi and connect to my in-house router just fine and do what on the internet through the phone. SO... it is definitely something specific with wireless internet sharing.
???
Someone please he me I use internet sharing DAILY
You need to make sure that it is connecting to the correct address. At the bottom of the App, it should have a few different choices of connections to use. Try another one and see if it works. You may have to set up a new connections for this to work properly. Keep in mind that tethering/mobile hotspot is not covered by AT&T's wireless data plan. It is a separate monthly charge. You should be careful when using it too much at a time, so they don't block or throttle your connection.
The device I am trying to connect with to my Tilt 2 is a Samsung Galaxy Tab, and apparently it doesn't like ad-hoc, whatever that is exactly. I was told on the Galaxy Tab section of this forum that this is the case, and that I need some kind of "mobile ap", although again I do not understand what that exactly means. ???
Ah, see that's much better information. So, no, you probably won't be able to connect without another app doing so. Ad-hoc is, simply put, a connection to another device other than a router which is allowing you access to its Internet connection. If the device you're trying to connect with doesn't allow ad-hoc connections, then the Wifi Router app won't do you any good, as that is the type of connection it uses. Most mobile devices do not natively support this, however. The problem, therefore, is with the Galaxy Tab you have, not with the TP2. Find an app or mod that allows for ad-hoc connections and you'll be all set.
Well is there an apparently for the WM phone side of things that will do non ad-hoc??
No. Ad-hoc is a connection between two devices. Unless you use a router, that's how it's going to be no matter if you are using WM, a laptop, iOS, Android, et cetera. The connection type is determined by the device sending the signal. If it comes from a device, then it is ad-hoc. It is not a problem with the software. That is how wifi was designed to work in the first place. The problem, again, is with the Tab, not the WM application.
Well apparently there is a solution for the Tab that allows it to see ad-hoc networks, so I will try that and let you guys know how it went.
Can no longer connect to Ad-Hoc with Tilt 2
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.