Develop Bugs

XDA IIs Wifi and lockups

Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks

I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.

No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil

I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)

efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!

I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!

I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel

I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....

Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.

I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?

WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK

Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel

As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel

Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens

Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.

Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.

XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave

Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel

No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?

Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??

WIFI HELP NEEDED

hi
i have a belkin g wireless 802.x.G router at home and have a wifi setup since long..
i was always able to connect to the wireless network with Bluangel aswell as my laptops.. (i have no encyrption.. or secutrity settings)
i upgraded the radio rom to 1.12 and after that have not been able to connect to the network.. it says belkinG network found and connected but the internet explorer or msn or agile messenger cant seem to find the net settings..
internet is on share in main computer nad my lap tops still conect and use it..
i thought may be it was because of rom 1.12 but flashed older 1.31 imate with ext rom and radio rom but still cant get the internet to work..
when i use PIE it says network card not found..check settings..
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks

zohaer21 said:
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
Click to expand...
Click to collapse
can you see if your pda2k's wlan adapter has an IP address? if not, then only radio is connected but that doesn't mean you have a working network connection.
I use vxUtil which is a collection of network tools, this enables me to ping, check settings, ip addresses and a whole lot of other stuff since the onboard utils just don't cut it for network use..

argh
I have the same problem although I havent upgraded any radio settings! My Wifi has worked fine since ive had my m2000, being able to stream video and music or surf the web. but recently i cant surf the web although I can still stream music.
Ive downloaded the program you reccomended, but not to sure what to do with it. Any help would be ideal
Thanks

hi
thanks guys.. i dont know what happened but everything is eorking now ..including the net.. just turned wifi on.. it asked me again whether this is for work or internet (evn htough i had it connected to internet last time aswell)
thanks

::: About Wifi :::

BT - WIFI interfirence
Try this on your Excalibur:
Establish connection with BT headset
Dial voice number
Activate WIFI at the same time
Did you hear any crackling and noise in your BT headset?

i'll try this a bit later when i get the chance, but isn't it common to have some interference if data is transmitting for both since they're both operating on 2.4ghz? also, what headset are you using? bt 1.2 should be better than 1.1

JwY said:
i'll try this a bit later when i get the chance, but isn't it common to have some interference if data is transmitting for both since they're both operating on 2.4ghz? also, what headset are you using? bt 1.2 should be better than 1.1
Click to expand...
Click to collapse
Well, I don't have this problem with TyTn.
I've tried Nokia BH 900 and Jabra JX10 - both 2.0

I'm glad i saw this thread. I'm having the same issue. I cannot stream music to my motorola ht820 bluetooth stereo headset if i use wifi. It just keeps stopping and freaks out on me. I was having issues streaming videos to my dash via wifi and using the headset also. I could not stream 100kbps videos over wifi! I thought the phone just wasn't powerful enough. (although it's not.. I could stream 300kbps videos on my old hp 3615 via wifi fine.)
I just was able to stream a video at 300kbps fine without bluetooth turned on using wifi and it worked fine. Grr!!

BT and wifi both use the same frequency.
I think you shoud try an other channel for the wifi. It may solve your problem.

Wifi how do you set IPs/DNS info?
did i over look something i can't figure out how to set IP, DNS and Subnet for my phone. I've gone to every connection screen did i over look something?

Internet via WiFi - Wireless Access Points Only
I am not subscribing to the data service on my cellular net. I only want to be able to access the net and email when I am in range of my WAP at home/work or at my favorite hot spots. I've got the WiFi settings so that I am connecting to my WAP and can see the SSID when it connects.. I've tried adjusting the settings in the IE options and am at the point where once in a while (1 out of 8 or so ) I can open access one page of a web site.. but can not navigate any further. If I type a different URL in it says locating and loading then times out.... what did I miss???
T-Mobile Dash / Re-ROM-ed to Excaliber.
All other functions seem to be OK.
Thanks, XmP

I've seen this as well. Playing around earlier today, I installed Opera Mini. Opera works fine over wifi or edge. I believe that the issue involves one or more IE bugs involving either the size (fragmentation?) of cache and/or scripts.
Also, Opera Mini isn't a solution (yet) either. It works great once installed and launched from the installer - but has to be uninstaller and reinstalled to work after you exit.
I can't wait for a linux port

I run into this problem all the time at my college and at my home. I turn on my wifi and the phone defaults to the network instead of wifi. I am on cingular with the 8125, I was using I/S PL 1.08 i just updated to cingular rom 2.24.10.1 WWE. I have tried IE, Opera, Mozilla (Minimo) and another i forget the name of. In all I preferred Opera but I feel Mozilla will be the best once the bugs are gone.
Oh yah and when I try and connect to the wifi network at my school they require a redirect to login through bluesocket. That is just too difficult for my little wizard and I rarely get through that system.

External antenna jack on Excaliber/Dash... is it just for GSM? or also WiFi?
Anyone had experience with the external antenna jack on the back of the Dash (under the mirror button)? Just wondering if using this connector would improve performance on WiFi? or is it designed only for GSM reception?
I found a cable which fits the connector perfectly. Thanks for your responses.

Issue solved!
I rebooted my wireless router and everything works great...

Bump!
I'm guessing the absence of answers means that the settings cannot be changed (or may need a reg hack to do so) - I can't find them anywhere either...

so it works for an external wifi as well?

yes, it is possible to change these settings (or at least the IP adress). I have read about it, but can't remeber where. It's possible to chnge it somewhere in the registry, can't be changed directly through settings. If I find it, where I read about it, I will post it here ...

As I remember the external is designed for car holder external antenna, not for WiFi. You may find at most of the GSM mobile back also have this.

This was posted over at howardforums too. What, you didn't search the internet endlessly to find an answer?
Above poster is correct, it's for GSM only. Like I said over at HoFo, unless you're lost in the backwoods, I don't think it's going to help much. Plus, it looks a tad silly!

Thanks for all your responses. Yeah, I posted the question in a couple of forums (the level of expertise varies widely, as you know!).
Reason I asked... we want to be able to access realtime weather conditions while at a remote nature facility on a barrier island here on the West Coast of Florida -- you know, like hurricanes There is a weak WiFi signal from an access point about 1/4 mile away. I simply wanted to establish a stronger link by using an external antenna.
So although it might have looked silly, it was to be a quick fix for instant weather updates (like radar), when needed.

Wifi connection sloooow. For you also?
Hi, with my stock htc s620, establishing a connection to a wifi network that is already saved (home & work), takes around 1 to 2 mins.
What often happens also is that it goes to sleep before even connecting (with me waiting in IE or mail to clic on a favorite or do a send & receive action).
I can't understand this since a nokia n80 will take seconds and it's almost instantaneous on my macbook.
Are there any tricks or software that can accelerate this (unless I'm the only one to have this problem)?

Seems to be a problem of your hardware or a configuration problem. I have energy save mode enabled and usually it takes two or three seconds to connect, sometimes up to ten seconds, if it has extremly low WiFi-Signal.

interesting, I'm going to investigate on the software part first... You really think it could be a hardware issue?
What's sure is that once the connection is established, it's fast and doesn't drop.
BTW, do you mean seconds after the handset is waken up from sleep?
Hum, after looking in my Remove section on my handset, nothing appears, is there some kind of registry cleaner for smartphone?

Artemis WiFi and Belkin N1 Router

@ all,
it might sound a bit surprising, but I dont get my new artemis ( i now own one with wifi !, my hero didnt!),
working with the wireless of my belkin n1 router!
everytime i enter the mac adress into the router, wlan stops alltogether! ( do i need to enter the mac adress?)
entering the normal wpa-psk passwords into wm6.1 vanilla or b&b5, the connection constantly changes between available, but not connecting, and unavailable... even when sitting right next to the router!
any ideas?
help highly appreciated!
greetz
thormdac
news:
got it working for now-- changed wlan channel in rpouter to channel11, which is preset in wm6.1!
is that how its done?
Update:
most of the times the router just kills the wlan function all in all once i try to connect with the artemis!
Need to reboot router to get it running again!
Where am i going wrong?
p.s. no, i aint a novice

I've got the same roblem mate. Not got a clue what to do ?

Had the same issue with a Belkin N router yesterday. Solution I dumped it went down to Maplins and got a Netgear. Plugin and I was away.
Had flashed the rom serveral times (Win 5, 6, 6.1 some of the cooked roms) nothing worked was thinking it was a hardware failure.
Dont' appear to matter how you set the belkin nothing works.
Thou oddly my Exec connects with it just fine.

Azriaphale said:
Solution I dumped it ...
Click to expand...
Click to collapse
Gee, that would for sure make me one unhappy pal!
Anybody around here has another idea!
Possibly some tips on "Must does" ! for connecting via wifi with artemis! Whats with the mac address-thing?!!!
Greetz

To be honest, I've looked at dozens of sites searching for a solution to this issue. Everything from flashing the ROM (Device and router), enter MAC on the router, set a IP address, changing channels, security settings and nothing appear to work with the Belkin N family.
My experience with Belkin has not been good (Tech support has always been first class).
The first router (Cheap 54g) would run for 2 hours then lockup, requiring a reset of both the router and cable modem). Replaced by Belkin after several days talking to tech support.
The second router (Same 54g unit, different Version number) Ran fine until you moved data about, anything downloading above 150k locked the router. Wired connections could do 300k then lock up. Replaced by Belkin.
The third unit (Upgraded to a 2 stick version for free) DOA. Replaced by Belkin
The forth unit (Same 2 stick version) worked data transfers good but would not allow wifi connections other than WEP 64. Firmware update would then WEP 128. Replaced by Belkin.
The Fifth unit (Same 2 stick version, different version) Wifi worked with all settings. However with wifi on all wired connections ran like a 56k modem. Replaced by Belkin.
The sixth unit (Upgraded to the N) Worked fine. Wired connections fine, wifi was a bit hit or miss, two Toshiba laptops connected fine, the Dell laptop never connected. Belkins own N usb dongle also never connected.
My Orbit never connected to any of the Belkins, the Exec did with some and others not.
This issue is not limited to Belkin, if you look about, other makers routers also appear to have this issue.
The cheap Netgear (£35) works just fine for me. Took 5 minutes to setup. Everything in the house connects. I`m happy after 7 months of Belkin issues.

uiuiui,
what a story!
just so we dont get us wrong here: had my n1 now for about 6months, and its running just fine with all my notebooks! - just since trying to connect with my artemis i am running into probs!
A theory of this mornings trials:
any way of changing the preconfigured broadcast channel 11 within the artemis? --- seems to me the channelchanging is causing the hangups!
will try setting the router to channel 11 and see what happens!
greetz

Ive set channel to 6 in the N router, the Art/Orbit will find it and go though the motions of connecting and make it unavailable (our problem with N routers). The Network setting will show its on ch6 (if you can there before it becomes unavailable). Then goes to ch11.
I think the Art/Orbit just runs in sequence though the channels, if it gets a lock it uses that channel. If not it moves on, I think we just see ch11 because its the last ch available in the scan.
Have just played with the Netgear channels and the Art/Orbit connects with every channel, the Network setting page shows the correct channel that the routers broadcasting.
So it don't appear that the channel is hard coded to the Art/Orbit.

Ok stumbled across this thread a little too late. Our Linksys wrt54g was not able to handle the kind of data we were transferring and moved to a Belkin_N1 router, I have an HTC Wizard but same symptoms, if I try to connect to Belkin I can not connect to anything WIFI before a soft-reset, I get prompted for key fine once and during connection something messes up the wifi radio, I am not sure if its a software or hardware issue but got the same issue with an SMC router, while my D-Link at home is working fine. I wasted so much time flashing ROMs and what not. Thanks for everyone who has put info here, somebody can read here and save the pain of hitting the wall with frustration.

Which wireless N-router connects artemis? Belkin N1 doesnt !

@all,
just havin sold my iphone i am missing synching my mails with my pda over wireless, since my belkin n1 wireless router simply doesnt allow my artemis to connect
so, mind you telling me how you connect successfully?!
- which hardware / wlan access do you use?
greetz

Any wireless router will help you connect with artemis. I have used Dlink, netgear and also linksys routers to connect.
TO connect sucessfully, you need to activate wireless on the router. Then enable wireless in your arte using the comm manager. Once the wireless is activitated, try searching for networks.
Regards,
Kailash

thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz

have you checked that both the router and artemis are using the same authentication type? WPA/WEP etc
it might be worth checking that your router isnt set to N-Only for connection speed too....cant remember what speeds the artemis supports but B or G are most likely and maybe your router would reject the connection if it's the wrong type...IIRC the 'N' spec is still in-progress so not widely supported yet

Try a D Link DIR-655
thormdac said:
thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz
Click to expand...
Click to collapse
You are not alone!!! I bought a Belkin N1 Vision in December to replace an ageing 3Com router and no matter what I tried I couldn't get my artemis to work. Even without any security. Finally sent the Belkin back and got a D-Link DIR-655. It works like a dream. Connected with no problems at all.

Darn, that confirms what i thought for quite some time - anybody intrested in owning an N1Belkin!
Just doublechecked with an old netgear--and it connects right away...
thanx for ur help!
now could we widen the length of compatible routers, pls.?!
greetz

I use a sitecom 300N router and my artemis connects with it without any problem.
Phill

Netgear
Hi, I use a Netgear WNR834B. No problems using WiFi with Artemis.
Setup; WiFi up to 270 MbPs, region Europe, channel 6 broadcasting and the strongest encryption for security.
With all of the ROMs i have used, there were no WiFi issues.
Regards

This may be stating the obvious, and I apologize if it sounds stupid, but has anyone checked for the "wireless mode" on the router ?
Just ensure the router is on "mixed mode", i.e. it supports b/g/n connections...
Hope this helps...

hmm I also have problems with SMC (SMCWBR14S-N2), mixed mode, but not connect with Artemis.. my notebook connect without any problems.

had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps

mjm383 said:
had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps
Click to expand...
Click to collapse
Well done getting it to work. I thought I tried everything! Perhaps it was the restart that did it. Too late for me to confirm. My Belkin went back to be replaced with the DLink 655. Good router but does slow down with time and needs a reboot every now and then.