hi
i have a belkin g wireless 802.x.G router at home and have a wifi setup since long..
i was always able to connect to the wireless network with Bluangel aswell as my laptops.. (i have no encyrption.. or secutrity settings)
i upgraded the radio rom to 1.12 and after that have not been able to connect to the network.. it says belkinG network found and connected but the internet explorer or msn or agile messenger cant seem to find the net settings..
internet is on share in main computer nad my lap tops still conect and use it..
i thought may be it was because of rom 1.12 but flashed older 1.31 imate with ext rom and radio rom but still cant get the internet to work..
when i use PIE it says network card not found..check settings..
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
zohaer21 said:
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
Click to expand...
Click to collapse
can you see if your pda2k's wlan adapter has an IP address? if not, then only radio is connected but that doesn't mean you have a working network connection.
I use vxUtil which is a collection of network tools, this enables me to ping, check settings, ip addresses and a whole lot of other stuff since the onboard utils just don't cut it for network use..
argh
I have the same problem although I havent upgraded any radio settings! My Wifi has worked fine since ive had my m2000, being able to stream video and music or surf the web. but recently i cant surf the web although I can still stream music.
Ive downloaded the program you reccomended, but not to sure what to do with it. Any help would be ideal
Thanks
hi
thanks guys.. i dont know what happened but everything is eorking now ..including the net.. just turned wifi on.. it asked me again whether this is for work or internet (evn htough i had it connected to internet last time aswell)
thanks
Related
Hi guys, I recently destroyed my XDA2 and got a 2s on the insurance
Bluetooth on WM2003 SE if fair poor, but I managed to upgrade the stack thinger to 3900..... so I'm not completely XDA illiterate.
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
It has become clear that I have no idea what I'm doing with regards to networking. Could someone post a quick guide as to how to set up the wifi (from scratch) so that when it finds an unsecured network it will automatically use it for the internet.
Sorry if there's already a thread on this but I really can't find it. Cheers guys
-Mike
just what i need as well, i have just bought a wifi router so i can use the internet on my xda2s.
using the wireless manger -> wireless LAN manager i get:
STATUS: connected to network
SSID: NETGEAR
TX RATE: AUTO
MODE:INFRASTRUCTURE
CHANNEL 11
BSSID: 00-09-5B-D7-DC-2A
MAC: 00-09-2D-0B-C0-A6
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
if anyone has a any ideas it would stop me pulling my hair out.
Sorry to hijack this thread
mike freegan said:
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
-Mike
Click to expand...
Click to collapse
Mike, I dont think the wifi first and GPRS next works. It doesnt work properly on mine either. If I try a internet access via gprs and a local wifi is readily available, the system does not automatically switch to local wifi.....I think this could be a microsoft issue than a xda issue.
robboy said:
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
Click to expand...
Click to collapse
when u pull out the ethernet cable from the back of the router, can you still surf the net from you xda or PC?? that seems odd. So either you are not connecting to "your" own router, or someone else has a same router with unsecured setup and you were locked onto their service....if you follow what I mean. what happens if you kill the power to your router? you should definitely notice that the wifi service disappear in your xda and PC.
Dont expect a router to disappear by simply unplugging the ethernet cable, if the router is powered up, it will show up on your xda and the PC although obviously there will be no internet access.....
sorry if i wasn't clear. i meant i was still receiving a signal from the wifi router. i could never use the internet on the pda
update:
i can browse my pc files wirelessly using resco explorer, using the standard file explorer i can view the pc files using \\network/c and i have finally been able to connect to activesync.
however i still can not connect to the internet.
Any ideas, from looking on this forum it seems lots of peeps are having problems with this but nobody seems to have the answer
XDA Wi-Fi Solution....It Works!!!!
Hi,
I'm new to the forum and new to XDA2i (presumably XDA2s is same!) ....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
windupmerchant
Hi,
maybe something im missing here but i was at a friends house the other day and he has a wireless access point set up (open with no encrption set up yet ...just for testing purposes). so basically he is broadcasting his SSID. I turned my wifi on my m2000 and it picked up his access point and showed me that my phone had connected, with the WIFI signal enabled...however i could not browse or use the net which tells me that i was not picking up an IP address...wats going on here? any clues?
thanks for any help
K
kadabra said:
Hi,
maybe something im missing here but i was at a friends house the other day and he has a wireless access point set up (open with no encrption set up yet ...just for testing purposes). so basically he is broadcasting his SSID. I turned my wifi on my m2000 and it picked up his access point and showed me that my phone had connected, with the WIFI signal enabled...however i could not browse or use the net which tells me that i was not picking up an IP address...wats going on here? any clues?
thanks for any help
K
Click to expand...
Click to collapse
if the AP's DHCP sevice is off,you can't get the IP automatically
The DHCP is dodgy on my belkin router, so I have each PC and my BA set up to use a specific IP address, rather than rely on the iffy DHCP.
You may find you need to input a DNS if you do it this way.. just copy one off a working PC
Forgive me if I am talking utter c#$* but if you have established a connection have you not been allocated an IP via DCHP? Just taking a step back from router problems, when setting up the wireless connection did you set up for work or internet profile?
simjo, what you say is prefectly logical, but I have seen cases (as the thread poster was suggesting) where a connection has been created, but no IP addy issued. At these times, no internet access etc is possible. i.e. connection is said to be active, but it is useless.
My solution for this problem was as I posted above, dont bother with DHCP. Set IP addresses manually.
I have a similar problem on a new M2000 (so I'm probably overlooking something)
I can connect my PC and laptop to my router (D-Link 614) on WiFi without any problem
The M2000 can "see" the WiFi but there is no connection
When I try to view pages via GPRS there is no response
When I try MSN Messenger, same again there is no response
I've tried several soft and hard reboots, but no difference
I also find switching the "phone" on is very difficult as I am warned to "The phone is off. Do you want to turn Wireless on"
I then turn Flight Mode on, but am then warned that Orange GPRS cannot connect
I have managed to make some test phone calls, but the menus seem to be taking me round in circles...
Any advice welcome
My Best Roms - WIRELESS PROBLEMS FIXED!!
XDA IIs UK from O2 - WIRELESS PROBLEMS FIXED!!
1. Best ROM so far without doubt for me is the BA_TMNL_14200_119_11300_Ship from T-MOBILE
AND its the fastest ROM ive ever used!
2. Best ROM (slightly slower)
XDA 1.42 115 T-Mobile Firmware (uses Radio 1.13)
3. I-Mates 1.40 WWE with Radio 1.13
still had an issue with audio dropping from incoming calls
If you've seen any of my previous posts you'll see the hell i've been in trying to get anything to work with these ROMS, now it ALL works. and I dont say that lightly!
i tried the last 2 factory ROMS from O2 UK 140.237 & 140.242 which is there latest and I had WIFI nightmares with both of those..
I must have spent 30 hours swapping ROMs and this is the best Ive found so far now. Seamless Wireless Hookup everytime! I have Rude FM 88.2 Streaming Live through my Linksys Router at 64k 44khz using Pocket Music 3.2 , Surfing the Net, even the GPRS is stil enabled with the WIFI signal, a special lead pipes the audio to my Amplifier it's been on all day playing variouse stations, Windows Media Player streaming well, even download Skype over the XDA and installed it.
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
simontee said:
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
Click to expand...
Click to collapse
It is a PC connection problem
Try to enable PC internet sharing
simontee said:
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
Click to expand...
Click to collapse
Chek the settings your wi-fi card connect to Internet or to Workplace
....
Thanks for all the advise but my problem still not resolved yet.... not too sure whether is my home WIFI+router setting or my P800W setting problem.... this really getting to my nerve !!!
1. I can connect to my home WIFI and able to surf internet with my laptop.
2. I can connect to my home WIFI and able to surf internet with my old pda MITAC 558.
3. When i use my p800w... can connect to my home WIFI but cannot surf the internet. The weird part... managed to surf the internet few times... and then cannot surf again/..
Please help !!
I'm facing same problem also..
I can connect to Wifi, but when try to open website, using IE
is stuck on LOCATING....
WiFi Issues
I have exactly the same issues and have tried installing both Opera and Netfront to no avail. I can connect to Wifi perfectly can then sync Avantgo, download quick GPS updates and surf a couple of pages, then the DNS seems to fail, have tried with DHCP and fixed IP's. Think the o2 Orbit has some sort of DNS cache fault...As a side issue when the Orbit does connect it runs the Internet very slowly...Both a XDA IIi and XDAs run perfectly on the same wireless!!
Get the devices early and wait for the fixes!!
the same thing on Artemis - device gets IP from WiFi Access point by DHCP, but without DNS. I set DNS manually and Internet is working thought WiFi now.
I had the same problem then installed Wi-Fi Companion, issue resolved. You can download a trial for three days from Pocketgear or Handango.
I changed the wireless mode of the router to only wifi g
has anyone any idea how to get round this yet?
Tried to connect today and all that happens is ie sits there saying 'locating'
I tried Wifi companion..it shows me connected and everything but still can't surf the net.
how can I set DNS manually? might be worth a try
thanks for any help
quick update...Ive just been doig a tracert and ping of my service provider and although the trace and ping come out ok...i.e. still just sits there saying locating...
anyone any ideas?? getting desperate here
Apologies..another quick update....
it's not that I can't connect to the net..it's that there is a default page on IE that tries to connect to pda.o2.co.uk or something..and this page is either not there or something...so, changed the default page and I'm good to go...
apologies again
Mine did the same ... Heres the fix ... It has trouble locating the home page . Type in manually to the address line the url for say GOOGLE and wait for it to connect . Then go to tools options and save current page ( Google) as home page and hey presto ! Sorted
Hi
I also have a similar problem
I have a 802.11b broadband router (linksys) which works fine with my two wifi PC's and my Wifi XDA Exec to access the Internet and collect e-mail
I just got an XDA Orbit and although it "sees" and connects to the Broadband router it will NOT allow access to the internet or e-mail (apart from one very short half page of ntlworld.com home page on one occasion)
WORST than that , when I use the XDA Orbit with Wifi and Internet Explorer - it HANGS the wi-fi router after about 30 secs and I have to reset it before I can access the Internet from any other PC's !!
What am I doing WRONG ???
Any suggestions welcomed
I tried the above 'fixes' and it DID get me a BIT further
i.e. I was able to get a connection to google.co.uk for about 30 seconds and do one enquiry - but then it STILL hung the router and the XDA Orbit was stuck saying 'locating'
Take a look here this worked for me.
Sorry did not work for me - after 30-40 seconds of surfing IE hangs on 'locating' and the router hangs and has to be re-set
ANYTHING TO DO WITH 802.11b compatibility ????????
Where can I get Opera browser to try that ?
How many posters have fixed this problem ?
OK
I downloaded the latest trial version of OPERA and tested that
EXACTLY the same result
If I switch on WiFi and connect to the Internet via Opera, I can access the internet for about 30 seconds, then the browser cannot access any more
If I switch of WiFi on the Orbit quickly, then the Router is OK - if I don't, then the Router Hangs and all my computers lose internet access
Has anyone else seen this ??
Has anyone cured this ??
Is is an 802.11b problem ??
hi since upgrading my tmobile vario11 hermes 300 to wm6 shacp 3.30 i radio version 1.46 i cant get my wifi connection to work , it will connect to the conection ok , and in connection manager , it will show connected to wifi network , but every time i try and go on internet with phone , it will say there is no internet or data connection avalible? even if it is connected to my wireless connection , any ideas guys ? it is really annoying!
ripplingsnake said:
hi since upgrading my tmobile vario11 hermes 300 to wm6 shacp 3.30 i radio version 1.46 i cant get my wifi connection to work , it will connect to the conection ok , and in connection manager , it will show connected to wifi network , but every time i try and go on internet with phone , it will say there is no internet or data connection avalible? even if it is connected to my wireless connection , any ideas guys ? it is really annoying!
Click to expand...
Click to collapse
I suppose youve tried soft-reset and all that..
does it connect to the internet if you have it connected via usb to the computer?
i havent tried the comp connection no , and yes tried soft reset etc , but if it says it is connected to wifi on phone why is it not using it? i am in UK Btw
ripplingsnake said:
i havent tried the comp connection no , and yes tried soft reset etc , but if it says it is connected to wifi on phone why is it not using it? i am in UK Btw
Click to expand...
Click to collapse
Normally if it is connected to WiFi and if you know the WiFi has a good connection to the internet (i.e. no security, timing, aso.), it should connect. If WiFi does not work, it should try the Wireless connection. If u say that is also setup but still doesnot connect, try to connect it to the computer via USB and see if thats working.
I have used schaps 3.30c until a couple of hours ago and it was working with no issues over wifi and wireless... try hard reset then...
sorry i cant help more...
hey...I have the same problem with my X01HT... I can access to the WiFi in the office and even remote control my PC, but I still cannot visit Internet on the device...pls advise
anyone could kind lent me a hand ?
Does this help?
http://forum.xda-developers.com/showthread.php?t=318748&highlight=proxy
Can some one tell me how to share my 3G connection over wifi? I need to make the phone as a portable access point.
no can do.
Bluetooth or USB
Try hitchhiker it's free! but I'm not sure if it works for sharing using 3G... try it and let me know http://www.kasuei.com/hitchhiker/
No, It doesn't support to share the 3G connection.
So use Internet sharing over BT ?
Would like to use it as a wireless access point, so I can get access from computer and iPhone, seem like I have hard time to find a solution.
share the connection with the PC by USB. Put a wifi stick/pcicard in the PC and bridge the connections, then the iFoon can have 3G too
Maarten_NL said:
share the connection with the PC by USB. Put a wifi stick/pcicard in the PC and bridge the connections, then the iFoon can have 3G too
Click to expand...
Click to collapse
you got this to work?
or are you saying it should work?
i have tried to share a connection this way but have had no luck when using internet connection sharing/pan.
i did get it to work this way back in the day when the phone ran wm5 and had dun.
do you have any pointers on how to get internet connection sharing in wm6 to let more than one device connect to the 3g connection?
acem77 said:
you got this to work?
or are you saying it should work?
i have tried to share a connection this way but have had no luck when using internet connection sharing/pan.
i did get it to work this way back in the day when the phone ran wm5 and had dun.
do you have any pointers on how to get internet connection sharing in wm6 to let more than one device connect to the 3g connection?
Click to expand...
Click to collapse
seems like you may need an app on your pc to manage/route the connections not sure if this helps but you can try "network Magic" it give you a bit more options on the pc side for managing connections. would like to see where this goes for possible future applications. i'll give it a try when i have some free time and check with an comp tek friend of mine see what he thinks.
Yeah it sucks that no one has created a way to share the wifi connection just like we share bluetooth or usb.
We also need a proxy server that we can run on our phone.
ok, for me the boring part is the time of the connection, you can share via wifi by just turning on your internet sharing in whatever the pc connection, you just need to manually deffine your hermes wifi to 192.168.0.1 and it shares via internet sharing! The question here is that the connections stops after 10 minutes becouse of the warnig "check usb cable connection". Its very irritating to have to start connection every 10 min. !!!!!
awww...iPhones not fast enough Data-Wise for ya?
thought it was supposed to "revolutionize PDA Phones"
hah.
sorry, i had to add my 2¢ against Apple.
Beware, some mobile provider allready use NAT, thus you'll recieve a non-routable IP. I am not sure that you will be able to share a connection of this kind.