Develop Bugs

P3300 WM6 and wifi connection issue

All,
I just got my p3300 and successfully flashed wm6. COOL.
However I have a problem now and don't know if it is wm6 issue or my own net work:
with my laptop I can connect fine wirelessly to my router
With my p3300 and through usb through my laptop I can internet as well.
My p3300 sees all wireless networks fine, but cannot connect to my network.
I input all settings, have the correct passwork and key index. The phone tries to connect, but after 20 seconds responds that I have used the incorrect network key.
I tried using manual netork ip adress. then the phone does connect, but I cannot open an internet page.....
What am I doing wrong?
Patrick

I had the same problem. At the end i restarted my router and the connection worked fine.

Hi
How you do it? To flash wm6
I try but now my pocket not work.
Can you help me?
Thank you!

@ gradskia:
look on the site here, there are many helps to get you allong, but don't forget to load:SPL (USPL) v.01 - Another way to flash *ANY* rom to your device!
http://forum.xda-developers.com/showthread.php?t=311403
@akismal
I resretted the router,no succes. I also tried open/shared, 64/128 bit, and hex or normal.
Nothing seems to work te get the password accepted.
Anybody?

pwvandeursen said:
@ gradskia:
look on the site here, there are many helps to get you allong, but don't forget to load:SPL (USPL) v.01 - Another way to flash *ANY* rom to your device!
http://forum.xda-developers.com/showthread.php?t=311403
@akismal
I resretted the router,no succes. I also tried open/shared, 64/128 bit, and hex or normal.
Nothing seems to work te get the password accepted.
Anybody?
Click to expand...
Click to collapse
I'm facing the same problem at work with a 3Com Wireless route. At home I use ZyXel and wifi is working OK. Did you manage to find a solution?

802.11b and g
kostas_jp120 said:
I'm facing the same problem at work with a 3Com Wireless route. At home I use ZyXel and wifi is working OK. Did you manage to find a solution?
Click to expand...
Click to collapse
I haven't had any problems - but make sure that your router accepts 802.11b connections as well as 802.11g

TangerineTractor said:
I haven't had any problems - but make sure that your router accepts 802.11b connections as well as 802.11g
Click to expand...
Click to collapse
+1
Mine was struggling to connect to my router and when i checked the wireless settings it was set to Auto 108Mbps. After changing it to g & b all is fine now...........hope this helps.

Cadburys Man said:
+1
Mine was struggling to connect to my router and when i checked the wireless settings it was set to Auto 108Mbps. After changing it to g & b all is fine now...........hope this helps.
Click to expand...
Click to collapse
This is strange . Most probably is my 3Com router in the office that has the problem - it is setup as 11g. At home ZyXel is 11b. Artemis ROM is BB4.1 with 802.11g enabled.

wifi!

hello. after installing artemis touch 3.01 wwe seems that wifi doesn't work anymore. more than that, i can't find the icon for wifi. what should i do? i've reinstalled it and same thing. if someone can help me...thank you all!

Have you tried the Comm Manager
Start->Programs->Comm Manager

of course. i can't find it also in start/settings/connections. in comm manager I have: Modem Mode, Phone, Microsoft Direct Push, Data Connection, Ringer, Activesync. And if I activate modem mode, my phone mode turns off.

ady_uaic said:
of course. i can't find it also in start/settings/connections. in comm manager I have: Modem Mode, Phone, Microsoft Direct Push, Data Connection, Ringer, Activesync. And if I activate modem mode, my phone mode turns off.
Click to expand...
Click to collapse
try and reinstall the rom again, normally that will sort it out.

the problem is solved quite simple: start/settings/system/Advanced config/Appearance and it has to be checked the "Show wireless icon" option.

Or not so easy. even if my icon is there, when i want to activate it, doesn't work. i press on, and is thinking, then still on off option is remaining. where's the problem??

ady_uaic said:
Or not so easy. even if my icon is there, when i want to activate it, doesn't work. i press on, and is thinking, then still on off option is remaining. where's the problem??
Click to expand...
Click to collapse
Reinstall the rom... I don't have the problem and i installed it 3 times already (on different p3300 ofcourse)

allready done that. doesn't work. and same problem with the older rom, i think artemis touch 2.x and with 3.01 too, same problem.

strange.. I installed 2.1 and 3.01 without any problems so far. And you don't have troubles with other roms??? To start with the org. provided rom?

i think is a setting from me, but i don't know which one. i will install the rom again, and i'll tell you

Try:
Settings > connections > wifi > network adapters > sdio wlan wireless adapter >
use especific ip.

and if i don't know the ip, i want to connect in a club, with free pass?

when you get it working with a fixed IP, you should be able to get it working with dhcp..... As told i have no trouble with wifi using dhcp... and wifi to start with. I have the Touch 3.01 WE full running on my artemis

so, doesn't work. i've made a hard reset of my device, and when I press ON for wifi in comm manager, is thinking, and remains OFF.

If you dont know the ip
On the pc (windows i supose)
run
cmd
ipconfig /all
and you get somenthing like for the wireless adaptor
ip : 192.168.1.33
mask: 255.255.255.0
gateway: 192.168.1.1
then in the pocket pc Settings > connections > wifi > network adapters > sdio wlan wireless adapter >
use especific ip.
ip: 192.168.1.150 (150 a number is different than 33)
mask: 255.255.255.0
gateway: 192.168.1.1

in settings/connections i have: connections, csd line type, network cards, network plugin, and others insignifiant. and on network cards i have: ne2000 compatible ethernet driver, asyncMac NDISWAN miniport, bluetooth pan driver, remote-ndis host, virtual ethernet intermediate miniport, etc.

ady_uaic said:
so, doesn't work. i've made a hard reset of my device, and when I press ON for wifi in comm manager, is thinking, and remains OFF.
Click to expand...
Click to collapse
Did you try to download the Touch 3.01 FULL with Cube again and install that new downloaded one??

For wifi use "sdio wlan wireless adapter" or similar.

i will try another one, black & blue to see if is working.

Using WiFi ?

I have a HTC 8525 wm6 and i dont know how to use wifi. Whenever i go to the wifi area ( unblocked wifi) but i can never connect to the wifi. For example, whenever i am in my school library and ima preetu sure that there is wifi , but i cannot connect it. Can you tell me know to use wifi and how to connect it. i dont have gprs or data but its always connect to 3G first and then notice that cannot connect.

shadowluan said:
I have a HTC 8525 wm6 and i dont know how to use wifi. Whenever i go to the wifi area ( unblocked wifi) but i can never connect to the wifi. For example, whenever i am in my school library and ima preetu sure that there is wifi , but i cannot connect it. Can you tell me know to use wifi and how to connect it. i dont have gprs or data but its always connect to 3G first and then notice that cannot connect.
Click to expand...
Click to collapse
Again, my friend, what ROM are you running? Can you see where on your today screen if there is any connection manager, otherwise you'll have to go to start, settings, connections, and click on wifi. That will bring up the connection manager, and once you enabled your wifi, when there is one, you just need to put in the pass. simple really.

whenever iam in the wifi area, i can see the name of the wifi and i always click connect on it but it never let me. it said i have to change my setting or something. anyways, my rom version is RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship . thanks

shadowluan said:
whenever iam in the wifi area, i can see the name of the wifi and i always click connect on it but it never let me. it said i have to change my setting or something. anyways, my rom version is RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship . thanks
Click to expand...
Click to collapse
That should be fine, as long as you know the PSK key to get into their wifi network. For example if you are a member of the library they would have that for you.

No, iam talking about the unblocked wifi, unsecured, I could not even connect to the unsecured wifi

shadowluan said:
No, iam talking about the unblocked wifi, unsecured, I could not even connect to the unsecured wifi
Click to expand...
Click to collapse
Well i am connected on my phone right now to the wifi at home ... you may need to look elsewhere like here ...

hi zocster, i just want to ask you this question. In the connections setting, what is "my work network" "my ISP" and "my Media net" use for?

shadowluan said:
hi zocster, i just want to ask you this question. In the connections setting, what is "my work network" "my ISP" and "my Media net" use for?
Click to expand...
Click to collapse
I think it's the profile setting for diff wireless network you connect to

so what kind of settings did u set up to connect to your unsecured wifi?

shadowluan said:
so what kind of settings did u set up to connect to your unsecured wifi?
Click to expand...
Click to collapse
We are not lucky enough here to have unsecured wifi, our country still user pays.

ohh okay but thanks alot for your help anyways. i appreciate it .

shadow i have noticed on mine that alot of times it will connect to the wifi if you actually hit the ie button, sometimes it takes a few tries to connect. there is a setting you can uncheck that will help. under settings theres one that says dissconnect when not in use. you need to uncheck that.

Need registry for "Disable Data Connection"

Hey,
I need the reg. key for:
Phone Settings/Disable data connection when device enters sleep mode (or something like this)
Thanks!!!

just use diamond tweak or smth...

slovoflud said:
just use diamond tweak or smth...
Click to expand...
Click to collapse
...use this for that, and that for this!
I made my own settings with mortscript -> with one click my device is configured as I like it. I don't need tweaking progs any more. And some settings could not be set by these progs: eg: Wifi Network Adapters: Wifi Adapter should connect to Internet and not to work (RegWriteString("HKLM","\ControlPanel\WiFi\Ethernet\", "DestId", "{436EF144-B4FB-4863-A041-8F905A62C572}")) and so on....
But in the mean time I found the key:
RegWriteString("HKLM","\Comm\ConnMgr\Planner\Settings\", "SuspendResume", "GPRS_bye_if_device_off")
RegWriteDword("HKLM","\Comm\ConnMgr\Planner\Settings\", "CacheTime", 2)
Thanks,
Chris

[Q] connect to wlan with hidden SSID

my problem is that i have to hide my WIFI.
All my friends with a iphone can connect to the wlan.
So if i tipp in the Connection properties Manual it does not work. -> out of range but my hox has 1m distance too the router.
I think that this is a JB bug becouse my Nexus 7 can not connect too.¨
Does anyone knows how to connecta JB device to a wlan with a hidden ssid?
sorry for my good english
thanks for any help.

stifli said:
my problem is that i have to hide my WIFI.
All my friends with a iphone can connect to the wlan.
So if i tipp in the Connection properties Manual it does not work. -> out of range but my hox has 1m distance too the router.
I think that this is a JB bug becouse my Nexus 7 can not connect too.¨
Does anyone knows how to connecta JB device to a wlan with a hidden ssid?
sorry for my good english
thanks for any help.
Click to expand...
Click to collapse
Easiest thing to do is to broadcast the SSID, connect your HOX and then hide it again. AFter that, it should automatically connect even when the SSID is hidden.
Though hiding a SSID doesn't do anything for security.....