Using WiFi ? - 8525, TyTN, MDA Vario II, JasJam ROM Development

I have a HTC 8525 wm6 and i dont know how to use wifi. Whenever i go to the wifi area ( unblocked wifi) but i can never connect to the wifi. For example, whenever i am in my school library and ima preetu sure that there is wifi , but i cannot connect it. Can you tell me know to use wifi and how to connect it. i dont have gprs or data but its always connect to 3G first and then notice that cannot connect.

shadowluan said:
I have a HTC 8525 wm6 and i dont know how to use wifi. Whenever i go to the wifi area ( unblocked wifi) but i can never connect to the wifi. For example, whenever i am in my school library and ima preetu sure that there is wifi , but i cannot connect it. Can you tell me know to use wifi and how to connect it. i dont have gprs or data but its always connect to 3G first and then notice that cannot connect.
Click to expand...
Click to collapse
Again, my friend, what ROM are you running? Can you see where on your today screen if there is any connection manager, otherwise you'll have to go to start, settings, connections, and click on wifi. That will bring up the connection manager, and once you enabled your wifi, when there is one, you just need to put in the pass. simple really.

whenever iam in the wifi area, i can see the name of the wifi and i always click connect on it but it never let me. it said i have to change my setting or something. anyways, my rom version is RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship . thanks

shadowluan said:
whenever iam in the wifi area, i can see the name of the wifi and i always click connect on it but it never let me. it said i have to change my setting or something. anyways, my rom version is RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship . thanks
Click to expand...
Click to collapse
That should be fine, as long as you know the PSK key to get into their wifi network. For example if you are a member of the library they would have that for you.

No, iam talking about the unblocked wifi, unsecured, I could not even connect to the unsecured wifi

shadowluan said:
No, iam talking about the unblocked wifi, unsecured, I could not even connect to the unsecured wifi
Click to expand...
Click to collapse
Well i am connected on my phone right now to the wifi at home ... you may need to look elsewhere like here ...

hi zocster, i just want to ask you this question. In the connections setting, what is "my work network" "my ISP" and "my Media net" use for?

shadowluan said:
hi zocster, i just want to ask you this question. In the connections setting, what is "my work network" "my ISP" and "my Media net" use for?
Click to expand...
Click to collapse
I think it's the profile setting for diff wireless network you connect to

so what kind of settings did u set up to connect to your unsecured wifi?

shadowluan said:
so what kind of settings did u set up to connect to your unsecured wifi?
Click to expand...
Click to collapse
We are not lucky enough here to have unsecured wifi, our country still user pays.

ohh okay but thanks alot for your help anyways. i appreciate it .

shadow i have noticed on mine that alot of times it will connect to the wifi if you actually hit the ie button, sometimes it takes a few tries to connect. there is a setting you can uncheck that will help. under settings theres one that says dissconnect when not in use. you need to uncheck that.

Related

Connected ti WiFi router, but IE not connecting to Sites

Hey guys, I just recently got my Softbank and upgraded to WM6 this morning. All is good except for my WiFi. The phone is able to connect to my router but when I try to go to sites with IE it gives me this error:
"THe page cannot be displayed or downloaded because connection was lost. Check the connection and try again"
Sites show up fine with EDGE, but IE does not show sites via WiFi. Router even shwos the phone connected to it and that an IP is assigned.
Excuse my ignorance, I am new and any help and advice is greatly appreciated.
Try this ...
kman79 said:
Hey guys, I just recently got my Softbank and upgraded to WM6 this morning. All is good except for my WiFi. The phone is able to connect to my router but when I try to go to sites with IE it gives me this error:
"THe page cannot be displayed or downloaded because connection was lost. Check the connection and try again"
Sites show up fine with EDGE, but IE does not show sites via WiFi. Router even shwos the phone connected to it and that an IP is assigned.
Excuse my ignorance, I am new and any help and advice is greatly appreciated.
Click to expand...
Click to collapse
Click-start>settings>connections tab>wi-fi>network adapters>
make sure your ieee 802.11b/g compatible wi-fi Ad....is connecting you to "The Internet" and not "Work." Cheers
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Check these as well...
kman79 said:
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Click to expand...
Click to collapse
start>settings>connections>wi-fi:
1. Click on your wirless SSID which should say connected.
2. Make sure it says connected to the internet.
3. Select the "This is a hidden network."
4. Make sure all of your keys/passwords are correct.
start>settings>connections>wireless LAN:
1. Make sure it is connected with good strength.
2. Verify It gave you an ip on the Advanced Tab.
3. Turn the Power Mode all the way up to Best Performance.
In your router verify you are not blocking or mac address filtering this connection. You might want to reserve the IP address for you device MAC.
kman79 said:
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Click to expand...
Click to collapse
Worked for myself and others... http://forum.xda-developers.com/showthread.php?t=300887&page=5
(post #44)
I tried the settings and still no go. I'm using a Linksys router and I have it set up to where the router assigns the phone a specific IP. According to the router, the phone is connected and according to the phone, the phone is connected. Should the GPRS(EDGE) be active and connected at the same time? Cause it is, how do I manually disable it? I feel really stupid if this is why.
prodigalfish: Is that cab only for use with cingular network? I'm on tmobile network, so I'm not sure if I could use that cab. I will do a hard reset though, haven't tried that yet.
Yes It does matter....
kman79 said:
I tried the settings and still no go. I'm using a Linksys router and I have it set up to where the router assigns the phone a specific IP. According to the router, the phone is connected and according to the phone, the phone is connected. Should the GPRS(EDGE) be active and connected at the same time? Cause it is, how do I manually disable it? I feel really stupid if this is why.
prodigalfish: Is that cab only for use with cingular network? I'm on tmobile network, so I'm not sure if I could use that cab. I will do a hard reset though, haven't tried that yet.
Click to expand...
Click to collapse
TURN IT OFF!!!
Inside of activesync you must tell it allow wireless / data connection. If you press and hold the hangup red button the GRPS connection will drop. You can also turn it off in the comm manager.
Did you ever solve this problem as I am having exactly the same the one.
1. Wifi works fine, can transfer files over the network, Skype connects etc
2. Only PIE (PIEPlus) does not connect to web pages.
I have done everything mentioned here. Hmm
Wam7 said:
Did you ever solve this problem as I am having exactly the same the one.
1. Wifi works fine, can transfer files over the network, Skype connects etc
2. Only PIE (PIEPlus) does not connect to web pages.
I have done everything mentioned here. Hmm
Click to expand...
Click to collapse
My guess is that the version of PIE you are using (or PIEPlus) has a hard-coded proxy address that your device cannot reach. I use Opera myself, works much better than PIE (IMHO).
John
Have you tried changing the authentication to Shared instead of Open?
This worked for me.
I have the same problem with these newest roms, just after set up 3G connection(Softbank by using ConnSBM).
It worked fine with roms before 5/15th.

How can I share my 3G with wifi?

Can some one tell me how to share my 3G connection over wifi? I need to make the phone as a portable access point.
no can do.
Bluetooth or USB
Try hitchhiker it's free! but I'm not sure if it works for sharing using 3G... try it and let me know http://www.kasuei.com/hitchhiker/
No, It doesn't support to share the 3G connection.
So use Internet sharing over BT ?
Would like to use it as a wireless access point, so I can get access from computer and iPhone, seem like I have hard time to find a solution.
share the connection with the PC by USB. Put a wifi stick/pcicard in the PC and bridge the connections, then the iFoon can have 3G too
Maarten_NL said:
share the connection with the PC by USB. Put a wifi stick/pcicard in the PC and bridge the connections, then the iFoon can have 3G too
Click to expand...
Click to collapse
you got this to work?
or are you saying it should work?
i have tried to share a connection this way but have had no luck when using internet connection sharing/pan.
i did get it to work this way back in the day when the phone ran wm5 and had dun.
do you have any pointers on how to get internet connection sharing in wm6 to let more than one device connect to the 3g connection?
acem77 said:
you got this to work?
or are you saying it should work?
i have tried to share a connection this way but have had no luck when using internet connection sharing/pan.
i did get it to work this way back in the day when the phone ran wm5 and had dun.
do you have any pointers on how to get internet connection sharing in wm6 to let more than one device connect to the 3g connection?
Click to expand...
Click to collapse
seems like you may need an app on your pc to manage/route the connections not sure if this helps but you can try "network Magic" it give you a bit more options on the pc side for managing connections. would like to see where this goes for possible future applications. i'll give it a try when i have some free time and check with an comp tek friend of mine see what he thinks.
Yeah it sucks that no one has created a way to share the wifi connection just like we share bluetooth or usb.
We also need a proxy server that we can run on our phone.
ok, for me the boring part is the time of the connection, you can share via wifi by just turning on your internet sharing in whatever the pc connection, you just need to manually deffine your hermes wifi to 192.168.0.1 and it shares via internet sharing! The question here is that the connections stops after 10 minutes becouse of the warnig "check usb cable connection". Its very irritating to have to start connection every 10 min. !!!!!
awww...iPhones not fast enough Data-Wise for ya?
thought it was supposed to "revolutionize PDA Phones"
hah.
sorry, i had to add my 2ยข against Apple.
Beware, some mobile provider allready use NAT, thus you'll recieve a non-routable IP. I am not sure that you will be able to share a connection of this kind.

htc wifi router installed, now internet not working

I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Has anyone else had this problem? I had to finally do a hard reset/wipe to get things working again.
There's another similar report here, maybe in the cdma area.
I'm not clear on your issue. Is this wmwifi not working after a reboot or Activesync not recognizing after the reboot?
And are you using the latest wmwifi?
edit: I'm adding that I downloaded the latest wmwifirouter last friday 18sep09, and I thought it was a vpn/wifi issue on my laptop. My TP2 did not recognize under activesync after I did a few things, but WM did work the one time I tested it.
I am not using wmwifi. I am using HTC CM Internet Sharing:
http://forum.xda-developers.com/showthread.php?p=4170499#post4170499
I figured it was put out by HTC (and free) so it should work right?
It created the wifi access point fine, and I was able to surf with my laptop at good speeds. I left and came back and the internet would no longer connect (laptop or phone).
I tried everything from soft rebooting, to removing the application, to calling *228 (reset the phone), and even manually setting up the verizon data settings. Nothing worked. I just could not establish a data connection.
Finally I gave up and did a hard reboot and restore and it finally worked.
I really need a reliable way of setting up a wifi access point but dont want to risk this fiasco again.
Yeah, I mis-read your first post, sorry!
For me it was as simple as starting the wifi router program and then cleanly stopping it. If forced to quit, you will have no network access. It's happened a couple times for me.
jbass350z said:
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Click to expand...
Click to collapse
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
billu said:
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
Click to expand...
Click to collapse
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
jbass350z said:
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
Click to expand...
Click to collapse
Ah, that's probably for some other reason, no issues with 3G connection for me.
Same problem for me. I connect to the mobile through wifi (Adhoc connection) and the mobile is connected in 3G but I can't surf internet from my laptop.
Enable DHCP
Hi all
Sometimes after using this software you need to renable DHCP in the connections settings. This can be done via:
Start>Settings>Connections>WiFi>Wireless Networks>Network Adaptors>NE2000 Compatible Ethernet Adaptor and then select Use server-assigned IP address.
Cheers
andrew-in-woking
hi i installed e htc wifirouter but it is using my mms setting instead of my phone internet setting. any1 can help?

Updating 'My Location' problem

So this is my problem: no matter what cooked rom I've had on my HD i always have the same annoying problem. I can't update My Location weather on the today screen, at home where I have a DSL connection to the web and a WIFI router. At work when i connect to the wireless network i am able to update My Location weather. does anybody know what the problem is ? Thank you.
Same problem
Hi,
I have the same problem, and like you said, What i do,.. connect to any wireless network, or connecting to my mobile internet provider, i never get a fix in my Location...
So if anyone knows how to deal with this,...
Oooh AND Happy Newyear!
Doesn't anyone know what the problem is?
Here we go
My Location CANOT UPDATE via WAP GRPS or other Conection.
My Location work via WiFi ONLY.
Also i see a BUG in My Location you can test it for yourself hope soon someone to find solution.
Not all the Time the Weather Show diferent INFO but very very often.
Read This: http://forum.xda-developers.com/showthread.php?t=610315
tsalta said:
Here we go
My Location CANOT UPDATE via WAP GRPS or other Conection.
My Location work via WiFi ONLY.
Also i see a BUG in My Location you can test it for yourself hope soon someone to find solution.
Not all the Time the Weather Show diferent INFO but very very often.
Read This: http://forum.xda-developers.com/showthread.php?t=610315
Click to expand...
Click to collapse
to be more exact:
"My Location" works as long as WiFi is on. You can use any connections that you like as long as keeping WiFi on and not connected to any network.
It works, if I'm not mistaken, along with Google Maps and thus for the very first time when you update it'll ask to allow or disallow google maps to collect datas... allow it.
i ever have any problem with it ever since more stable version of the manila/sense came out. i usually update "My Location" via USB ActiveSync with WiFi on.
Tested on XannyTech GRID and EVO series
ok. I understood what you told me, but if I connect through the wifi router at home (the router being connected to the web through a DSL connection), shouldn't my HD see that connection as a WIFI connection - at least this is how I understand it. Am I wrong?
ultimatepichu said:
to be more exact:
"My Location" works as long as WiFi is on. You can use any connections that you like as long as keeping WiFi on and not connected to any network.
It works, if I'm not mistaken, along with Google Maps and thus for the very first time when you update it'll ask to allow or disallow google maps to collect datas... allow it.
i ever have any problem with it ever since more stable version of the manila/sense came out. i usually update "My Location" via USB ActiveSync with WiFi on.
Tested on XannyTech GRID and EVO series
Click to expand...
Click to collapse
My Location not working if the WiFi is ON need to have real internet conection for me
aure2009 said:
ok. I understood what you told me, but if I connect through the wifi router at home (the router being connected to the web through a DSL connection), shouldn't my HD see that connection as a WIFI connection - at least this is how I understand it. Am I wrong?
Click to expand...
Click to collapse
Maybe check your router setting and security setting. I tried in my wifi connection in my school and it worked fine.
tsalta said:
My Location not working if the WiFi is ON need to have real internet conection for me
Click to expand...
Click to collapse
hmm, i saw we're having different Sense huh. have you tried Xanny's? I confirm it works.
I'll check my router settings, and see.Thank you.
2 threads already on this topic. I've closed one and now I'm closing this one. Please post further queries/issues on this matter in this thread

WiFi help

Hy. I bought my defy one week ago and I have noticed some inconsistencies with the WiFi function. I got it tot work on a public network in a restaurant on the first try. At home however everything seems so random : I got it to connect to WiFi 5-6 times eventhough I don't have a router but most of the times I get the : "connection detected" notification but no internet access ( when i select the network in the wifi settings it says the signal is excellent ).
My modem is a Huawei EchoLife HG520s, I am running windows 7 x32, my phone was not rooted and i didn't make a blur account.. that doesn't work either.
I would really appreciate your help.
Flinck said:
Hy. I bought my defy one week ago and I have noticed some inconsistencies with the WiFi function. I got it tot work on a public network in a restaurant on the first try. At home however everything seems so random : I got it to connect to WiFi 5-6 times eventhough I don't have a router but most of the times I get the : "connection detected" notification but no internet access ( when i select the network in the wifi settings it says the signal is excellent ).
My modem is a Huawei EchoLife HG520s, I am running windows 7 x32, my phone was not rooted and i didn't make a blur account.. that doesn't work either.
I would really appreciate your help.
Click to expand...
Click to collapse
You are getting wifi signal at home but do not have a router? You mean a wifi router? If that's the case maybe you are picking up wifi signals from someone else's router and you cannot connect because you need to sign on? If you are having trouble getting on your own router, could you tell us what it is etc.?
You didn't set up a Blur account? Or you did and it doesn't work? Where are you located? If you tried to set it up and couldn't it may be because some markets (I hear) do not support Blur. For instance, there are some models of Defy that do not have Blur and that's probably why.
Sorry i should have made it clearer: i have not bought any kind of router but the modem i use could have a wifi router incorporate(i don't know if it does i lost its documentation).
I live in a house with no nearby sources of wifi and both networks (the one i use to connect to the internet from my pc and the wifi i find if i scan wth my phone have the same name)
I live in Romania and everytime i try to set up a Blur account and click the start button it cancels.
Flinck said:
Sorry i should have made it clearer: i have not bought any kind of router but the modem i use could have a wifi router incorporate(i don't know if it does i lost its documentation).
I live in a house with no nearby sources of wifi and both networks (the one i use to connect to the internet from my pc and the wifi i find if i scan wth my phone have the same name)
I live in Romania and everytime i try to set up a Blur account and click the start button it cancels.
Click to expand...
Click to collapse
Is there any way you can temporarily disable your modem's wifi security just so you can get on to see if that works? Make sure to turn it back on after, this is just to see if that's the cause of the trouble.
Also about setting up a Blur account - did you try that at home, or at an open Wifi area (eg. the restaurant)? If it doesn't work at home then I guess it's worth trying it at the restaurant or any other place where you can get the connection to work.
Well the network i get here at home is 'open' and i get a connection everytime.. just no internet access on my phone and the computer doesn't seem to recognise the connection (happen exactly he same even on the times i had internet access)
Flinck said:
Hy. I bought my defy one week ago and I have noticed some inconsistencies with the WiFi function. I got it tot work on a public network in a restaurant on the first try. At home however everything seems so random : I got it to connect to WiFi 5-6 times eventhough I don't have a router but most of the times I get the : "connection detected" notification but no internet access ( when i select the network in the wifi settings it says the signal is excellent ).
My modem is a Huawei EchoLife HG520s, I am running windows 7 x32, my phone was not rooted and i didn't make a blur account.. that doesn't work either.
I would really appreciate your help.
Click to expand...
Click to collapse
exactly what happened to me. is not a router's problem but a DNSes problem.
you must enter the router and disable the "automatic DHCP". enter in the settings of the phone, wifi, advanced DNS settings automatically if not found. and it work.
P.S. after this if you have problems with your computer, right click the connection, and then do "problem solving". good luck ...
powertony84 said:
exactly what happened to me. is not a router's problem but a DNSes problem.
you must enter the router and disable the "automatic DHCP". enter in the settings of the phone, wifi, advanced DNS settings automatically if not found. and it work.
P.S. after this if you have problems with your computer, right click the connection, and then do "problem solving". good luck ...
Click to expand...
Click to collapse
the only problem is that I can't seem to find a router in my devices.. i have a internet modem that might have a wi-fi router incorporated
How does the computer connect to the modem if it uses USB i'm not too sure what you can do but if it uses ethernet what I recommend you do is click on start, and type in "cmd" when this loads type "ipconfig /all" this will then bring up all the details of your connection. What you are looking for is the default gateway, this will be the address of your router. With this add "http" and the default gateway number into a browser,you should then be able to get into the routers config and then you can follows powertony84's guide.
Well i'm pretty sure the network I connect to with my phone is mine because i just changed its security level to WEP using bobdigby advice. But I got lost afterward.
I have attached a prinscr of the DHCP setting i can fiddle with and i really appreciate your help so far
Any idea what channel i should use? i got a tip to chage the channel but i don't know into which one
I don't use any router but I turn my laptop, which supports wifi, into a wifi hotspot so that my defy can use wifi within my apartment. It's wonderful!

Categories

Resources