All,
I just got my p3300 and successfully flashed wm6. COOL.
However I have a problem now and don't know if it is wm6 issue or my own net work:
with my laptop I can connect fine wirelessly to my router
With my p3300 and through usb through my laptop I can internet as well.
My p3300 sees all wireless networks fine, but cannot connect to my network.
I input all settings, have the correct passwork and key index. The phone tries to connect, but after 20 seconds responds that I have used the incorrect network key.
I tried using manual netork ip adress. then the phone does connect, but I cannot open an internet page.....
What am I doing wrong?
Patrick
I had the same problem. At the end i restarted my router and the connection worked fine.
Hi
How you do it? To flash wm6
I try but now my pocket not work.
Can you help me?
Thank you!
@ gradskia:
look on the site here, there are many helps to get you allong, but don't forget to load:SPL (USPL) v.01 - Another way to flash *ANY* rom to your device!
http://forum.xda-developers.com/showthread.php?t=311403
@akismal
I resretted the router,no succes. I also tried open/shared, 64/128 bit, and hex or normal.
Nothing seems to work te get the password accepted.
Anybody?
pwvandeursen said:
@ gradskia:
look on the site here, there are many helps to get you allong, but don't forget to load:SPL (USPL) v.01 - Another way to flash *ANY* rom to your device!
http://forum.xda-developers.com/showthread.php?t=311403
@akismal
I resretted the router,no succes. I also tried open/shared, 64/128 bit, and hex or normal.
Nothing seems to work te get the password accepted.
Anybody?
Click to expand...
Click to collapse
I'm facing the same problem at work with a 3Com Wireless route. At home I use ZyXel and wifi is working OK. Did you manage to find a solution?
802.11b and g
kostas_jp120 said:
I'm facing the same problem at work with a 3Com Wireless route. At home I use ZyXel and wifi is working OK. Did you manage to find a solution?
Click to expand...
Click to collapse
I haven't had any problems - but make sure that your router accepts 802.11b connections as well as 802.11g
TangerineTractor said:
I haven't had any problems - but make sure that your router accepts 802.11b connections as well as 802.11g
Click to expand...
Click to collapse
+1
Mine was struggling to connect to my router and when i checked the wireless settings it was set to Auto 108Mbps. After changing it to g & b all is fine now...........hope this helps.
Cadburys Man said:
+1
Mine was struggling to connect to my router and when i checked the wireless settings it was set to Auto 108Mbps. After changing it to g & b all is fine now...........hope this helps.
Click to expand...
Click to collapse
This is strange . Most probably is my 3Com router in the office that has the problem - it is setup as 11g. At home ZyXel is 11b. Artemis ROM is BB4.1 with 802.11g enabled.
Related
Hey guys, I just recently got my Softbank and upgraded to WM6 this morning. All is good except for my WiFi. The phone is able to connect to my router but when I try to go to sites with IE it gives me this error:
"THe page cannot be displayed or downloaded because connection was lost. Check the connection and try again"
Sites show up fine with EDGE, but IE does not show sites via WiFi. Router even shwos the phone connected to it and that an IP is assigned.
Excuse my ignorance, I am new and any help and advice is greatly appreciated.
Try this ...
kman79 said:
Hey guys, I just recently got my Softbank and upgraded to WM6 this morning. All is good except for my WiFi. The phone is able to connect to my router but when I try to go to sites with IE it gives me this error:
"THe page cannot be displayed or downloaded because connection was lost. Check the connection and try again"
Sites show up fine with EDGE, but IE does not show sites via WiFi. Router even shwos the phone connected to it and that an IP is assigned.
Excuse my ignorance, I am new and any help and advice is greatly appreciated.
Click to expand...
Click to collapse
Click-start>settings>connections tab>wi-fi>network adapters>
make sure your ieee 802.11b/g compatible wi-fi Ad....is connecting you to "The Internet" and not "Work." Cheers
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Check these as well...
kman79 said:
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Click to expand...
Click to collapse
start>settings>connections>wi-fi:
1. Click on your wirless SSID which should say connected.
2. Make sure it says connected to the internet.
3. Select the "This is a hidden network."
4. Make sure all of your keys/passwords are correct.
start>settings>connections>wireless LAN:
1. Make sure it is connected with good strength.
2. Verify It gave you an ip on the Advanced Tab.
3. Turn the Power Mode all the way up to Best Performance.
In your router verify you are not blocking or mac address filtering this connection. You might want to reserve the IP address for you device MAC.
kman79 said:
Thanks for the reply. I verified that, checked it and double checked, but I'm still getting the same error. Are there other settings I need to change or look at?
Click to expand...
Click to collapse
Worked for myself and others... http://forum.xda-developers.com/showthread.php?t=300887&page=5
(post #44)
I tried the settings and still no go. I'm using a Linksys router and I have it set up to where the router assigns the phone a specific IP. According to the router, the phone is connected and according to the phone, the phone is connected. Should the GPRS(EDGE) be active and connected at the same time? Cause it is, how do I manually disable it? I feel really stupid if this is why.
prodigalfish: Is that cab only for use with cingular network? I'm on tmobile network, so I'm not sure if I could use that cab. I will do a hard reset though, haven't tried that yet.
Yes It does matter....
kman79 said:
I tried the settings and still no go. I'm using a Linksys router and I have it set up to where the router assigns the phone a specific IP. According to the router, the phone is connected and according to the phone, the phone is connected. Should the GPRS(EDGE) be active and connected at the same time? Cause it is, how do I manually disable it? I feel really stupid if this is why.
prodigalfish: Is that cab only for use with cingular network? I'm on tmobile network, so I'm not sure if I could use that cab. I will do a hard reset though, haven't tried that yet.
Click to expand...
Click to collapse
TURN IT OFF!!!
Inside of activesync you must tell it allow wireless / data connection. If you press and hold the hangup red button the GRPS connection will drop. You can also turn it off in the comm manager.
Did you ever solve this problem as I am having exactly the same the one.
1. Wifi works fine, can transfer files over the network, Skype connects etc
2. Only PIE (PIEPlus) does not connect to web pages.
I have done everything mentioned here. Hmm
Wam7 said:
Did you ever solve this problem as I am having exactly the same the one.
1. Wifi works fine, can transfer files over the network, Skype connects etc
2. Only PIE (PIEPlus) does not connect to web pages.
I have done everything mentioned here. Hmm
Click to expand...
Click to collapse
My guess is that the version of PIE you are using (or PIEPlus) has a hard-coded proxy address that your device cannot reach. I use Opera myself, works much better than PIE (IMHO).
John
Have you tried changing the authentication to Shared instead of Open?
This worked for me.
I have the same problem with these newest roms, just after set up 3G connection(Softbank by using ConnSBM).
It worked fine with roms before 5/15th.
Windows Mobile 6 devices offer Internet Sharing feature for Bluetooth and USB. It works in this way that you start Internet Sharing application inside of your Windows Mobile phone and then other devices can share the Internet connection. What if you could fool Windows Mobile phone and instead of Bluetooth use WiFi? Would it be possible? Yes, it is:
how to use Internet Sharing over WiFi, which essentially makes the Hermes an Access Point.
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
I got this from a different website.
detailed information on this topic you can fined at
http://forum.xda-developers.com/showthread.php?t=332360
edward
Edward!! you rock! this has got to be the sweetest thing, since wm6..for me atleast, Im actually posting from my old hacked OSX x86, I really cant believe this worked, but it did.
Thanks a ton for sharing the info.
Edward, Can you plse explain why you set the wifi adaptor to a fixed IP?
The 192.168.1.1 is as far as I know only valid if the router has the 192.168.1 range. For me it should be 192.168.123. ...
Thx for an explanation.
a cab would be perfect!
Yes! A very nice feature; could this be put in as a cab?
Or better, in the comm manager.....
Anyone?
aeroke said:
Edward, Can you plse explain why you set the wifi adaptor to a fixed IP?
The 192.168.1.1 is as far as I know only valid if the router has the 192.168.1 range. For me it should be 192.168.123. ...
Thx for an explanation.
Click to expand...
Click to collapse
Your phone is now the router.
edward-riko
I tried the steps to the letter however, I am unable to connect. I tried on one device running Schaps 3.54c & the other vp3G. I get confused after I complete the step "select wireless tab then add new." The new wireless network shows unavailable on my device" I think I'm unsure how to configure the connection on the PC side. I'm unable to get the wireless configurator to allow me to input a specific IP address. I'm using Windows XP Pro. Any help would be greatly appreciated.
OK, I have been resisting, but why would you do this.
If you are using wifi to access the Internet, and the phone and PC both have wifi (in order to use wifi sharing), why not just access the wifi directly from the PC? Sorry to be thick, but I don't see why you would want this?
todd_jg said:
OK, I have been resisting, but why would you do this.
If you are using wifi to access the Internet, and the phone and PC both have wifi (in order to use wifi sharing), why not just access the wifi directly from the PC? Sorry to be thick, but I don't see why you would want this?
Click to expand...
Click to collapse
and if you don't have WiFi access to the Internet but only cellular access?
cp1md2b said:
edward-riko
I tried the steps to the letter however, I am unable to connect. I tried on one device running Schaps 3.54c & the other vp3G. I get confused after I complete the step "select wireless tab then add new." The new wireless network shows unavailable on my device" I think I'm unsure how to configure the connection on the PC side. I'm unable to get the wireless configurator to allow me to input a specific IP address. I'm using Windows XP Pro. Any help would be greatly appreciated.
Click to expand...
Click to collapse
play with this some more it will work in the end
do it systematically
edward
edward-riko said:
and if you don't have WiFi access to the Internet but only cellular access?
Click to expand...
Click to collapse
Hah! I knew I must have been missing something. Thanks.
WiFi & WM5?
Does this work on WM5? The instructions don't seem to match for me. Can someone tell me how to do this on WM5?
Nautme said:
Does this work on WM5? The instructions don't seem to match for me. Can someone tell me how to do this on WM5?
Click to expand...
Click to collapse
no it will not
THANK YOU
I have tried this out and it apprears to work pretty well- thank you so much, I had hoped this would be figured out. i had the idea to do this but not the technical know how.
This is awesome
but you know what would be also interesting?
to be able to share the wifi connection over Bluetooth or usb instead of the cellular.
Basically using the phone as a wifi adapter.
What say you?
titan 6800
Has any one gotten this to work with the 6800? The registry key for bluetooth is different.
Thanks
Garvin.
edward-riko said:
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
I got this from a different website.
Click to expand...
Click to collapse
Actually, it came from this site - we've been discussing it for days in the Development and Hacking forum! It was in this post by Fluxist who'd discovered it in the first place, and the other sites have been following suit... we're working on a more elegant way to do it now. And you directly quoted his post!
I'm going to be trying to write a full-on NAT router for it I think, although we're seeing if we can do a basic version for now.
man, i cannot belive this..
that is amazing
N2A said:
Actually, it came from this site - we've been discussing it for days in the Development and Hacking forum! It was in this post by Fluxist who'd discovered it in the first place, and the other sites have been following suit... we're working on a more elegant way to do it now. And you directly quoted his post!
I'm going to be trying to write a full-on NAT router for it I think, although we're seeing if we can do a basic version for now.
Click to expand...
Click to collapse
i took it from PPCGeeks forum
http://forum.ppcgeeks.com/showthread.php?t=9340
sorry if i a fended you in any way and good luck with your work
edward
killershot20 said:
This is awesome
but you know what would be also interesting?
to be able to share the wifi connection over Bluetooth or usb instead of the cellular.
Basically using the phone as a wifi adapter.
What say you?
Click to expand...
Click to collapse
I was thinking the same thing. I frequently stay in foreign hotels in which are "unwired." I'd love to use my phone as the registered device when buying wifi so that I could make VOIP calls and check my e-mails on ground and tether it to my notebook back in the roam. In Dubai, you can get hooked for $30 a day for wifi.
edward-riko said:
i took it from PPCGeeks forum
http://forum.ppcgeeks.com/showthread.php?t=9340
sorry if i a fended you in any way and good luck with your work
edward
Click to expand...
Click to collapse
Heh, it's cool dude - PPCGeeks got it from us - but check your research ;-) No point having duplicate threads.
I seem to be having some strange issues since I upgraded to WM 6.1 on my Dash. When I activate the wireless and let it discover my access point (configured with WPA-PSK) it finds it but then refuses to connect (marking it as offline).
Switching the wireless off/on doesn't resolve this as it will no longer even pick up my Access Point. Only when I reboot the phone will it pick it up again and then I am in the circle whereby it won't connect etc.
Are there any tools/settings I can change to clear the device out of any wireless config info (besides from doing a re-flash)? I think it just needs to be reset back to default and that will cure it as it was working ok a while before.
Thanks.
Might be your access point. Picking up the signal and connecting are two different things. I am running the Kavana ROM and it works fine against my Belkin Wirless Router G via WPA-PSK.
Can you connect using no security? (or WEP?)
swyftmeister said:
Might be your access point. Picking up the signal and connecting are two different things. I am running the Kavana ROM and it works fine against my Belkin Wirless Router G via WPA-PSK.
Can you connect using no security? (or WEP?)
Click to expand...
Click to collapse
Thanks am going to try that. It looks like it could be my router as I recently changed it but when I swapped back to my old router I still had the same issues.
What wireless version is enabled on the Dash - is it 11b? I am wondering if its that as my new router has 11n capability.
Yep it was my router. New firmware has fixed it.
For reference its Draytek Vigor 2820n
I've got a 2820vn and am having the excat same issues...what firmware did u update to?
drewy said:
I've got a 2820vn and am having the excat same issues...what firmware did u update to?
Click to expand...
Click to collapse
I am using the 3.2.1 beta 12 firmware provided by Draytek support. I have uploaded a copy here:
http://rapidshare.com/files/116157566/v2820_3.2.1beta12-.zip.html
Let me know if it solves your issue too.
I have been flashing a few 2.03 ROMs in the last few days and in all of them I find the same malfunction. I first tried with a few cooked ROMs and finally also with the stock one, same result.
Problem is with setting a static IP in WIFI. At first, it works all fine. However, soon after disconetting WIFI, you get the surprise of being unable to use the data connection over GPRS. I have trying everything (dunno how many soft- and hard-resets, even changing radio's), the only solution I have been able to find was simply that of deleting all parameters referring to the WIFI connection (including hence the static ip). By doing that, all gets back to normal. Simple solution but kind of annoying if everytime I want to use WIFI and static-IP (quite often in my case) I have to set all parameters again and again. I am now back to a 2.00 ROM which has not this problem.
Any chance someone can suggest a more elegant and stable solution?
cheers, much appreciated
Same problem here.
best regards
Got the same problem
Got the same problem here: running Dutty's V4 ROM I can't connect if I have a static ip address listed for my WIFI connection. I did have the same issue once before on a 1.93 ROM which was fixed by a hard reset, but no joy with that this time.
bump! so many new good roms flying around... i wonder whether this bug with WiFi/staticIP has been fixed. ???
thanx
vrolok71 said:
bump! so many new good roms flying around... i wonder whether this bug with WiFi/staticIP has been fixed. ???
thanx
Click to expand...
Click to collapse
Someone have any news?
i have same problem on rom 2.03.405.2WWE..and use static ip on wifi and only solution for me is to set on connection as default my work network not operator gsm and than work perfect, on gpsrs connection i can browse on internet but cannot conect with palringo!!! so anyone can fix this bug!!!
frunzygsm said:
i have same problem on rom 2.03.405.2WWE..and use static ip on wifi and only solution for me is to set on connection as default my work network not operator gsm and than work perfect, on gpsrs connection i can browse on internet but cannot conect with palringo!!! so anyone can fix this bug!!!
Click to expand...
Click to collapse
Can you explain more?
How can I set default connection?
Thanks
well u can use wi-fi profiles, to make profiles for each ESSID with the static ip and wep key if any, i have 4 profiles each with different statics ip's and keys. and when using gprs, i just click on dhcp only and voila. altho i didnt had the problem with static + gprs data, i'm not using gprs so much, but still i think this is a good solution, will upload cab tomorow here ( i found it on this forum somewhere cant remember exactly) cheers
littlej said:
well u can use wi-fi profiles, to make profiles for each ESSID with the static ip and wep key if any, i have 4 profiles each with different statics ip's and keys. and when using gprs, i just click on dhcp only and voila. altho i didnt had the problem with static + gprs data, i'm not using gprs so much, but still i think this is a good solution, will upload cab tomorow here ( i found it on this forum somewhere cant remember exactly) cheers
Click to expand...
Click to collapse
yep, here's the cab
i had the same problem, thx for the cab, works until somebody will fix this problem...
today I've tried to make a rom with new wm build and eom and drivers from 2.00 (which don't have this problem) but gprs doesn't work with static ip... so i think it is caused from last wm build... damn microsoft
I'm having a similar problem - I have a static IP and can not connect to wi-fi unless connected to activesync...
Can the wifi profiles program help? If so what do I have to do on it? Do I have to change any values?
Any other ideas?
His!…
the same problem with Touch PRO from the update of ROM.
Installing the old ROM it even follows the problem.
Greetings
I have the same problem as well. I can connect to wifi at home with or without activesync , but sometime I can't connect free wifi at Mcdonald or car wash. Can someone help pointing out problem? or setting I need to do. Many thanks
I'm having the same problem with wm 6.1 build 21043, this sucks so much. I thought it was a problem with the hardware in the Diamond at first, but so many other people are having it that it's more than likely a problem with Windows Mobile.
Any fixes?
freeza said:
I'm having the same problem with wm 6.1 build 21043, this sucks so much. I thought it was a problem with the hardware in the Diamond at first, but so many other people are having it that it's more than likely a problem with Windows Mobile.
Any fixes?
Click to expand...
Click to collapse
Turn on DHCP server on, that means AP will gives you automatically IP, and you can use wireless connection...
In options in "select networks" , select "my work" or something similarly, don't use ISP!
I don't have problem with active DHCP server on my HTC diamond, and i can use everywhere wireless connection...
I use Cloudy1.1 rom
Greetz
@all,
just havin sold my iphone i am missing synching my mails with my pda over wireless, since my belkin n1 wireless router simply doesnt allow my artemis to connect
so, mind you telling me how you connect successfully?!
- which hardware / wlan access do you use?
greetz
Any wireless router will help you connect with artemis. I have used Dlink, netgear and also linksys routers to connect.
TO connect sucessfully, you need to activate wireless on the router. Then enable wireless in your arte using the comm manager. Once the wireless is activitated, try searching for networks.
Regards,
Kailash
thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz
have you checked that both the router and artemis are using the same authentication type? WPA/WEP etc
it might be worth checking that your router isnt set to N-Only for connection speed too....cant remember what speeds the artemis supports but B or G are most likely and maybe your router would reject the connection if it's the wrong type...IIRC the 'N' spec is still in-progress so not widely supported yet
Try a D Link DIR-655
thormdac said:
thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz
Click to expand...
Click to collapse
You are not alone!!! I bought a Belkin N1 Vision in December to replace an ageing 3Com router and no matter what I tried I couldn't get my artemis to work. Even without any security. Finally sent the Belkin back and got a D-Link DIR-655. It works like a dream. Connected with no problems at all.
Darn, that confirms what i thought for quite some time - anybody intrested in owning an N1Belkin!
Just doublechecked with an old netgear--and it connects right away...
thanx for ur help!
now could we widen the length of compatible routers, pls.?!
greetz
I use a sitecom 300N router and my artemis connects with it without any problem.
Phill
Netgear
Hi, I use a Netgear WNR834B. No problems using WiFi with Artemis.
Setup; WiFi up to 270 MbPs, region Europe, channel 6 broadcasting and the strongest encryption for security.
With all of the ROMs i have used, there were no WiFi issues.
Regards
This may be stating the obvious, and I apologize if it sounds stupid, but has anyone checked for the "wireless mode" on the router ?
Just ensure the router is on "mixed mode", i.e. it supports b/g/n connections...
Hope this helps...
hmm I also have problems with SMC (SMCWBR14S-N2), mixed mode, but not connect with Artemis.. my notebook connect without any problems.
had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps
mjm383 said:
had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps
Click to expand...
Click to collapse
Well done getting it to work. I thought I tried everything! Perhaps it was the restart that did it. Too late for me to confirm. My Belkin went back to be replaced with the DLink 655. Good router but does slow down with time and needs a reboot every now and then.