Hi
I got a big problem flashin Mary's Rom under Vista.
At the moment I got the latest PDAVIET Rom. Now when I'm flashing it stops at 1% even on my XP-Laptop ????
So I tried to flash Karmba...same problem...stuck at 1%
any ideas ????
thx
1%
snoopy-doopy said:
Hi
I got a big problem flashin Mary's Rom under Vista.
At the moment I got the latest PDAVIET Rom. Now when I'm flashing it stops at 1% even on my XP-Laptop ????
So I tried to flash Karmba...same problem...stuck at 1%
any ideas ????
thx
Click to expand...
Click to collapse
Try flashing an official ROM. Then try Mary of Karmba. Hope it works
jmermel said:
Try flashing an official ROM. Then try Mary of Karmba. Hope it works
Click to expand...
Click to collapse
A friend of mine got the same problem, and he flashed a original ROM.
The result is when he is booting, Triny stops at the splash screen, and he is not able to enter bootloader manualy
snoopy-doopy said:
A friend of mine got the same problem, and he flashed a original ROM.
The result is when he is booting, Triny stops at the splash screen, and he is not able to enter bootloader manualy
Click to expand...
Click to collapse
Is very stranger, I flash my Trinity more than 10 times peer day and nothing happen.
hellonasty said:
Is very stranger, I flash my Trinity more than 10 times peer day and nothing happen.
Click to expand...
Click to collapse
IMHO the problem is the PDAVIET ROM
Same problem
I Have the same problem, Error 270. I can´t install any ROM. Only the original !
Error 270
Maurício Eduardo Moritz said:
I Have the same problem, Error 270. I can´t install any ROM. Only the original !
Click to expand...
Click to collapse
There is a easy fix for this. After you get the error message, just start the rom update again and it will work.
jmermel said:
There is a easy fix for this. After you get the error message, just start the rom update again and it will work.
Click to expand...
Click to collapse
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?
Maurício Eduardo Moritz said:
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?
Click to expand...
Click to collapse
Yep same thing for me, the phone reboots. Trying to flash again after rebooting and Triny stops again at 1%.
PDAVIET is not the first cooked ROM in my Triny, but I think it will be the last ;-(
Try this
Try replacing the files in the update folder with this ones!
Works with me!
RomUpdater
hybridteory said:
Try replacing the files in the update folder with this ones!
Works with me!
RomUpdater
Click to expand...
Click to collapse
The same error, start ok, but in 2% stop and reboot my device. The ROMUpdateUtility says Erro 270 .
Maurício Eduardo Moritz said:
The same error, start ok, but in 2% stop and reboot my device. The ROMUpdateUtility says Erro 270 .
Click to expand...
Click to collapse
Try flashing from XP and not entering boot mode manually, try leaving the PDA on and connected to activesync.
1% problem
Maurício Eduardo Moritz said:
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?
Click to expand...
Click to collapse
Do not disconnect your cable once you get the error.
Try this: Copy the sspl file to your storage card and go to the file and activate.
http://forum.xda-developers.com/showthread.php?t=293632
then try to install rom
jmermel said:
Do not disconnect your cable once you get the error.
Try this: Copy the sspl file to your storage card and go to the file and activate.
http://forum.xda-developers.com/showthread.php?t=293632
then try to install rom
Click to expand...
Click to collapse
Perfect ! Problem Solved !
TKS
Now instaling Mary 3.3.5
Hi
I updated my Triny with the official ROM...and it WORKS.
So my Triny is back to live. Than I tried to put the Black&Blue Rom (under Vista) on it, but I get the same message and it stuck at 1%.
stuck again
snoopy-doopy said:
Hi
I updated my Triny with the official ROM...and it WORKS.
So my Triny is back to live. Than I tried to put the Black&Blue Rom (under Vista) on it, but I get the same message and it stuck at 1%.
Click to expand...
Click to collapse
Try going back to official ROM then upgrade to Karmba 5.0
Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
Today i tried to flash my PDA back to amazing artemis 1.0
beacuse i like it
but i had stuck in my computer I stoped flashing but my mobile is not working and not charging
it's not macking boot loade mode
please help me
sorry for my bad english
remove battery during several minutes and try again to enter in boot loader.
thank you brother ofter remove th battery for 10 minutes the mobile worked on boot loader
thanx bro
How to entering into the Boot Mode my P3300?
lefteris said:
How to entering into the Boot Mode my P3300?
Click to expand...
Click to collapse
You can find it in the Artemis Wiki, this is the page you'd have found - http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
lefteris said:
How to entering into the Boot Mode my P3300?
Click to expand...
Click to collapse
Hi bro, hold on the voice-dail button (record button), & hold the power button at the sametime. then wait several seconds, you'll get the multi-color screen.
now it's time to plugin the usb for upgrading or recovering.
I met the problem that it always failed when the progress was 3%. i downloaded several roms from internet. how could i know which rom is correct for my device(p800 in China). Besides, my device could just enter the boot mode, so it's impossible to unlock spl for it.
and The worst thing is that there are several hours(not minutes) between each time to power on it. It means i should wait 1 or 2 or 3 hours (who the hell know) to re-flash it after i was failed to flash previously.
is anybody had the same experience. that's really make me crazy.
THANKYOU MR Sanco60 THANKYOU VERY MUCH FOR YOUR IDEA OF SWITHCH ON IN BOOT THANKYOU MY DEAD MOBILE NOW SHINES
sanco60 said:
Hi bro, hold on the voice-dail button (record button), & hold the power button at the sametime. then wait several seconds, you'll get the multi-color screen.
now it's time to plugin the usb for upgrading or recovering.
I met the problem that it always failed when the progress was 3%. i downloaded several roms from internet. how could i know which rom is correct for my device(p800 in China). Besides, my device could just enter the boot mode, so it's impossible to unlock spl for it.
and The worst thing is that there are several hours(not minutes) between each time to power on it. It means i should wait 1 or 2 or 3 hours (who the hell know) to re-flash it after i was failed to flash previously.
is anybody had the same experience. that's really make me crazy.
Click to expand...
Click to collapse
Hi,
you've removed the microSD, right?
If yes, did you try with the original ROM for the P3300?
p800=p3300, but i'm not 100% sure...
bye,
Silvio
Hello Guys,
I have the same problem with my P3300.
The problem is that the phone do not start and I cant put in the cooked rom because I did not make the Uspl when it was still alive.
Is it possible to USPL the rom also if is not connected whit activesync?
Thanks beforehands!
fabio
[email protected] said:
Hello Guys,
I have the same problem with my P3300.
The problem is that the phone do not start and I cant put in the cooked rom because I did not make the Uspl when it was still alive.
Is it possible to USPL the rom also if is not connected whit activesync?
Thanks beforehands!
fabio
Click to expand...
Click to collapse
Hi
Original ROM? Didn't work?
O.T.: Are you Italian?
Bye,
Silvio
Ciao Silvio!
yes I'm Italian, thank you for the reply.
I had the original ROM, but now the phone is broken, if I try to switch it on the system go in crash in few seconds.
i tried to put in in bootloader mode (colored screen), but i can not load in ROM because the process crash when is at 3%, can I USPL the ROM from the sd card or when is off?
Thanks,
Fabio
[email protected] said:
Ciao Silvio!
yes I'm Italian, thank you for the reply.
I had the original ROM, but now the phone is broken, if I try to switch it on the system go in crash in few seconds.
i tried to put in in bootloader mode (colored screen), but i can not load in ROM because the process crash when is at 3%, can I USPL the ROM from the sd card or when is off?
Thanks,
Fabio
Click to expand...
Click to collapse
Are you sure that have you removed the SD card when you flash?
O.T.: me too, if you prefer to speak italian with me you can write in Italian in O.T. but you must wrote also in english
Bye Silvio
P.S. I don't speak English very well
Yes the Sd is off,
PS: Compared with mine your English is good
[email protected] said:
Yes the Sd is off,
PS: Compared with mine your English is good
Click to expand...
Click to collapse
ok, but you have the SPL blocked?
P.S. I don't think...
Yes unfortunately....
you can try to extract the nbh file from the executable of the original ROM and with SD Flash but I'm not sure ... I'm sorry, now I must run away, see you tomorrow
Bye,
Silvio
. I don't speak English bat understain
Compared with mine your English is good
Compared with mine your English is good
please help please!!!!!!!!!
my htc arte 100 is not enter a boot menu.tricolors screen and IPL1.13.0001,SPL1.1.13.0000
activesync is reconizet this device bat not seed to conectings.
firmware working 2% and ...error 294-invalid vender id
USPL charging 100% bat...error 270
johanis1982 said:
my htc arte 100 is not enter a boot menu.tricolors screen and IPL1.13.0001,SPL1.1.13.0000
activesync is reconizet this device bat not seed to conectings.
firmware working 2% and ...error 294-invalid vender id
USPL charging 100% bat...error 270
Click to expand...
Click to collapse
What ROM did you try to flash?
Bye,
Silvio
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
aali-01 said:
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
Click to expand...
Click to collapse
You must flash the rom using MTTY
http://forum.xda-developers.com/showthread.php?t=540290
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
aali-01 said:
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
Click to expand...
Click to collapse
There is not a perfect radio.You must flash some radios from
http://forum.xda-developers.com/showthread.php?t=470306
and check which is the best.
As for 1.20 olinex i think you must upgrade to 1.93
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
aali-01 said:
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
Click to expand...
Click to collapse
i have 1.17 official diamond radio.But in every rom you flash there is a radio that chef recommend.
http://forum.xda-developers.com/showthread.php?t=580490&highlight=RADIO
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
aali-01 said:
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=4fQE0P3diKg
This a tutorial from awran5.
Search and the first link "the definite mtty thread"
brother i have tried everything but still not able to get USB in the combobox
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
aali-01 said:
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
Click to expand...
Click to collapse
Happy that all gone well.
Thanks to xda
You have to download the official rom from the htc web site... then flash it and after that flash first the recomended radio and then the rom that you chose...
I dont know if you already know but.... rename any rom that you want to flash with this name...DIAMIMG...and then copy it to the internal storage....after that restart....and press backwards and volume down keys together and install the new ROM....by pressing the power key...
think this will help
try this will definitely work cause i have same problem too!!
read carefully and try it if u have this problem u have to use mitty everytime u flash(i think cause for me is every time i flash new ROM)
xxxx://forum.xda-developers.com/showthread.php?t=540290
replace xxxx with http
Thanks to all man. my problem is solved.
Please help a newbie here, I am trying to install Shady313 ROMs + Kitchen on my HTC p3300
I folllowed the ROM Update instructions on the thread
to start_uspl.exe
My P3300 is connected to the PC fine using ActiveSync, Full CHarged
I will get either
ERROR [220] : MAIN BATTERY POWER
or
ERROR [260] : UPDATE ERROR
So, what should I do now?
azlan96 said:
Please help a newbie here, I am trying to install Shady313 ROMs + Kitchen on my HTC p3300
I folllowed the ROM Update instructions on the thread
to start_uspl.exe
My P3300 is connected to the PC fine using ActiveSync, Full CHarged
I will get either
ERROR [220] : MAIN BATTERY POWER
or
ERROR [260] : UPDATE ERROR
So, what should I do now?
Click to expand...
Click to collapse
click link below for p3300 uploads, here is 1,.1.cmon, spelt wrong, its 1.11.cmon (dummies guide inside)
*dont soft reset when it says to though..
Rn
raving_nanza said:
click link below for p3300 uploads, here is 1,.1.cmon, spelt wrong, its 1.11.cmon (dummies guide inside)
*dont soft reset when it says to though..
Rn
Click to expand...
Click to collapse
screen goes blank, ActiveSync connection got cut off, ERROR 260
...
Error 260 is the connection to activesync..
put device into Bootloader..
run the Rom Update Utility..
raving_nanza said:
Error 260 is the connection to activesync..
put device into Bootloader..
run the Rom Update Utility..
Click to expand...
Click to collapse
I did, but still getting Error 260
...
is device stuck in bootloader or is your device still alive and running windows mobile?
still alive running winmo
...
just keep trying..
honest
successfully flashed to Shady WinMo 6.5 stock..
But I dont like it, I cant get GPS signal at ALL
azlan96 said:
successfully flashed to Shady WinMo 6.5 stock..
But I dont like it, I cant get GPS signal at ALL
Click to expand...
Click to collapse
Tell me what did you do? I can't install anything!
mhg said:
Tell me what did you do? I can't install anything!
Click to expand...
Click to collapse
cant install what?
...
Uspl?
Rom?
Cab?
:s
...
if your still trying to "install" (flash) the rom/uspl..
try taking the sd card out..
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
GokulNC said:
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
Click to expand...
Click to collapse
I did it same problem...
KrishuFC said:
I did it same problem...
Click to expand...
Click to collapse
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
GokulNC said:
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
Click to expand...
Click to collapse
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
KrishuFC said:
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
Click to expand...
Click to collapse
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
GokulNC said:
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
Click to expand...
Click to collapse
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
KrishuFC said:
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
Click to expand...
Click to collapse
Sorry, but I no longer have that phone
Just ask someone else.
GokulNC said:
Sorry, but I no longer have that phone
Just ask someone else.
Click to expand...
Click to collapse
Ok then! it seems nobody is gonna help me
KrishuFC said:
Ok then! it seems nobody is gonna help me
Click to expand...
Click to collapse
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
GokulNC said:
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
Click to expand...
Click to collapse
I'm trying!! lets hope
I also have same problem.. can anyone provide a solution
KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Sagar Kapasi said:
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Click to expand...
Click to collapse
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
KrishuFC said:
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
Click to expand...
Click to collapse
So You Are Saying You Left That Phone Dead?
Sagar Kapasi said:
So You Are Saying You Left That Phone Dead?
Click to expand...
Click to collapse
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
KrishuFC said:
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
Click to expand...
Click to collapse
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Sagar Kapasi said:
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Click to expand...
Click to collapse
Yes give it a try why not you should go...