Develop Bugs

Moving from O2 WM6 to BB v 4

Hi all,
Plz bear with my ignorance when it comes to upgrading ROMS etc.
Basically yesterday I upgraded to O2's official WM6 ROM .... and find it "not so good". It is slow to respond etc( i found it slower than my WM5 )
So now I wanna move to BB4, question is how do i do it??
I have downloaded an Artemis_USPL from Prof. So what are the steps I need to do??
Is it ...
1) Run start_uspl.exe from the zip file and let it complete.
2) Run( double click ) the img-46785-Tom_B_B_v4_0_TouchFlo_Professional.exe
Is that all I need to do?
Also, if I brick it .... what do i need to do to revert to an original ( say o2 WM6 ROM) ... is it USPL it again then run the O2 rom??
Many thanks
Fahd

yep, thats what you need to do. both 1) and 2) will need some user input and after it's done the device resets itself. so after 1) wait until restart is complete, then do 2).
for your original roms you dont need uspl. but if you are not completely sure, run it anyway.

Thanks for that. Time to give it a whirl! Wish me luck!!

Hmmm doesnt wanna play ball.
Did the above and ran uspl .... got stuck on a white screen. So I rebooted the Orbit and tried running the BB4 .exe ... got to 3 % and told to that .......
Error 270: Update Error. The image file is corrupted. Please check your update ultilty.

Can anyone help?? It will not upgrade ROM.
I keep getting the white screen and it cant run ROM utility(Error 224: Device not responding ).
I then reset the device and run BB4 ... I get to 3% and then I get error:270 ( image file is corrupt ). I have downloaded the ROM again and still get this error.
Any helpers out there??
Thanx
Fahd

I had the ame problem mate. What you need to do is revert back to the original 02 WM5 Rom which can be found on this forum somewhere. Then once installed, run uspl & then the BB4 Rom & hey presto your sorted.
For some reason i couldnt get uspl to work on WM6 02 rom either

Hi fadhp,
Ensure that your windows firewall is disabled and also you shut down any anti-virus programs running on your PC
I also found that turning off all the plugins on the today screen helped me to upgrade my O2 orbit.
I went through the same issues as you with corrupted images at 2% , however following the steps above helped me.

The firewall was disabled and so was AV ... so not sure about next steps.
I thibnk I shall try downgradind to original O2 WM5 rom and then upgrade ....
question is where in this forum is that Rom!! I had seen it before but as usual when u dnt need something you find it and when you need it u cant!
Will keep on searching .... anyone know the link plz save me some time!
Thanx
F

question is where in this forum is that Rom!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866&page=2&highlight=orbito2uk-wm5
The link for the original O2 WM5 is in post #13, the 3rd one down.

Thanks for that.
Downgraded to WM5 now .... and tried to run BB4 .... still no joy. Same error.
Maybe i'll try another ROM just to see if that works and if it doesnt then MUST be my PC or something.
Here goes!
Cheers guys will kepp u posted.
F

Tried another machine ..... XP SP2 not FW or AV still failed.
Always get to 3% then crash.
HELP!!

Tried BB3.7 still no luck. 3% and crashes .... on 2 diff PC's.
I noticed that USPL runs ver 3.0.3.0 of the update utility but the actual ROMS when you launch them are running 3.6.3.6 ... does this make a difference?
Help guys plz!

Those are the issue no's of the rom upgrade utilities - it does not matter. It appears you are still not cid unlocked. whats your spl no? take it from first bootscreen.

SPL is 1.25.0000
IPL is 1.25.0001
Ideas??

The spl from uspl is 1.110000 so you need to run uspl again. Even if the screen goes blank wait till it says your rom has been upgraded.

Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??

Some people had to run uspl 3 times in a row for it to work. Did you wait a while on white screen before giving up? I guess you are on 02 wm5 at the moment if not flash to that and try again. If you are do a hard reset and try again - few times in a row.

OK looks like USPL doesnt work for me!
Everytime I ran it under WM5 i still had 1.25.0000 and then i upgraded ROM to O2 WM6 and now everytime I run USPL it stays at 3.04.0000.
It doesnt do anything after the white screen ..... just sits there like a duck!
With so many ppl having succesfully done this surely someone can be a Wizard of Orbit??

fahdp said:
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Click to expand...
Click to collapse
Had same problem. Dont reset the phone but just if you see only the black screen, run the USPL update.

I have an orbit and uspl flashed first time from wm5 and wm6 - is yours usa orbit? If you really cant run uspl then it will need cid unlock from imei check - it costs but you have permenant cid unlock so you need not worry again.

1% Problem

Hi
I got a big problem flashin Mary's Rom under Vista.
At the moment I got the latest PDAVIET Rom. Now when I'm flashing it stops at 1% even on my XP-Laptop ????
So I tried to flash Karmba...same problem...stuck at 1%
any ideas ????
thx

1%
snoopy-doopy said:
Hi
I got a big problem flashin Mary's Rom under Vista.
At the moment I got the latest PDAVIET Rom. Now when I'm flashing it stops at 1% even on my XP-Laptop ????
So I tried to flash Karmba...same problem...stuck at 1%
any ideas ????
thx
Click to expand...
Click to collapse
Try flashing an official ROM. Then try Mary of Karmba. Hope it works

jmermel said:
Try flashing an official ROM. Then try Mary of Karmba. Hope it works
Click to expand...
Click to collapse
A friend of mine got the same problem, and he flashed a original ROM.
The result is when he is booting, Triny stops at the splash screen, and he is not able to enter bootloader manualy

snoopy-doopy said:
A friend of mine got the same problem, and he flashed a original ROM.
The result is when he is booting, Triny stops at the splash screen, and he is not able to enter bootloader manualy
Click to expand...
Click to collapse
Is very stranger, I flash my Trinity more than 10 times peer day and nothing happen.

hellonasty said:
Is very stranger, I flash my Trinity more than 10 times peer day and nothing happen.
Click to expand...
Click to collapse
IMHO the problem is the PDAVIET ROM

Same problem
I Have the same problem, Error 270. I can´t install any ROM. Only the original !

Error 270
Maurício Eduardo Moritz said:
I Have the same problem, Error 270. I can´t install any ROM. Only the original !
Click to expand...
Click to collapse
There is a easy fix for this. After you get the error message, just start the rom update again and it will work.

jmermel said:
There is a easy fix for this. After you get the error message, just start the rom update again and it will work.
Click to expand...
Click to collapse
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?

Maurício Eduardo Moritz said:
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?
Click to expand...
Click to collapse
Yep same thing for me, the phone reboots. Trying to flash again after rebooting and Triny stops again at 1%.
PDAVIET is not the first cooked ROM in my Triny, but I think it will be the last ;-(

Try this
Try replacing the files in the update folder with this ones!
Works with me!
RomUpdater

hybridteory said:
Try replacing the files in the update folder with this ones!
Works with me!
RomUpdater
Click to expand...
Click to collapse
The same error, start ok, but in 2% stop and reboot my device. The ROMUpdateUtility says Erro 270 .

Maurício Eduardo Moritz said:
The same error, start ok, but in 2% stop and reboot my device. The ROMUpdateUtility says Erro 270 .
Click to expand...
Click to collapse
Try flashing from XP and not entering boot mode manually, try leaving the PDA on and connected to activesync.

1% problem
Maurício Eduardo Moritz said:
Hi !
But the Bootloader close and the phone start. I need change or updating someting in my device ?
Click to expand...
Click to collapse
Do not disconnect your cable once you get the error.
Try this: Copy the sspl file to your storage card and go to the file and activate.
http://forum.xda-developers.com/showthread.php?t=293632
then try to install rom

jmermel said:
Do not disconnect your cable once you get the error.
Try this: Copy the sspl file to your storage card and go to the file and activate.
http://forum.xda-developers.com/showthread.php?t=293632
then try to install rom
Click to expand...
Click to collapse
Perfect ! Problem Solved !
TKS
Now instaling Mary 3.3.5

Hi
I updated my Triny with the official ROM...and it WORKS.
So my Triny is back to live. Than I tried to put the Black&Blue Rom (under Vista) on it, but I get the same message and it stuck at 1%.

stuck again
snoopy-doopy said:
Hi
I updated my Triny with the official ROM...and it WORKS.
So my Triny is back to live. Than I tried to put the Black&Blue Rom (under Vista) on it, but I get the same message and it stuck at 1%.
Click to expand...
Click to collapse
Try going back to official ROM then upgrade to Karmba 5.0

Please help my JasJar is dead

I tried to flash WM 6.1
and then Give me Error and now i have a black screen
any one can help me please!!!!

this would help
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
best of luck..

i tried all of that but not working

What error is it ?

i treid to upgrade to windows 6.1 , while i'm updating gives me error and i tried to restart my mobile but nothing at all even i can not access the bootloader

Is your computer recognizin' your PDA. What happens when you connect it to the USB port ? Also, try after removin' SIM and the SD.
P.S: And you still need to tell me, what error msgs do ya get ?

my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.

I presume that you are tryin' to install the ROM designed for Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
try this, or search xda-developers usin' google, you may find the solution.
Error code 101 is actually connection error.

hey, are you usin' Windows Vista

no XP SP2 , but as i told you i think i installed rom not for universal

also my screen is dead nothing at all only black no serial or usb on the screen

aahmed12 said:
no XP SP2 , but as i told you i think i installed rom not for universal
Click to expand...
Click to collapse
Oh man,
you have screwed up your phone big time. Post a thread in General Discussion> Upgrading, Modifying and Unlocking. Someone there might b able to help you out on this.
All the best.

i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?

Isaygarcia said:
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Click to expand...
Click to collapse
hey bro, error 112 actually denotes ROM update error.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
follow Method 2 , if it doesn't work, then follow Method 1, mtty may prove useful in this situation.
Good Luck..

thanks !
i havent tried the method 2.. but method 1 doesnt seem to work..
many thanx..

ok that methods doesnt work.. im stucked not in bootloader... i can exit bootloader but the system doesnt start... when i press the reset button it just keeps white screen (w/o backlit) and nothing happens.. if i connect the phone in that state just unrecognizes it and if i press the light and power buttons (without resset) it starts the bootloader.. its not reading the rom

every time that i try to flash a rom on it just fails, and it gets the error 112, on every 7%... how can i fix it?

Oops! I omitted the quote

aahmed12 said:
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
Click to expand...
Click to collapse
I have the same problem. I mistakenly flashed the wm6.1 rom meant for BA. I dont think there is any remedy for this problem because the unit is not coming on and so cannot enter bootloader. The only sign of life is the red led which means the unit is not seeing the power supply ie it does not recognise that a battery is instaaled. No one has ever come up with a solution. The unit is bricked fullstop. I am already bidding on another unit on ebay.

i did chat with imate support and they advice me to go to any service center and they will fix it.
i tried many kind of solutions but it does not work so my last choise is to send it to imate service center.

plzzzzzz help me out guys

hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.

aali-01 said:
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
Click to expand...
Click to collapse
You must flash the rom using MTTY
http://forum.xda-developers.com/showthread.php?t=540290

Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.

aali-01 said:
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
Click to expand...
Click to collapse
There is not a perfect radio.You must flash some radios from
http://forum.xda-developers.com/showthread.php?t=470306
and check which is the best.
As for 1.20 olinex i think you must upgrade to 1.93

where would i find that radio? what radio would u recomend ? kindly share the link.
thanks

aali-01 said:
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
Click to expand...
Click to collapse
i have 1.17 official diamond radio.But in every rom you flash there is a radio that chef recommend.
http://forum.xda-developers.com/showthread.php?t=580490&highlight=RADIO

brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help

aali-01 said:
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=4fQE0P3diKg
This a tutorial from awran5.
Search and the first link "the definite mtty thread"

brother i have tried everything but still not able to get USB in the combobox

brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!

aali-01 said:
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
Click to expand...
Click to collapse
Happy that all gone well.
Thanks to xda

You have to download the official rom from the htc web site... then flash it and after that flash first the recomended radio and then the rom that you chose...
I dont know if you already know but.... rename any rom that you want to flash with this name...DIAMIMG...and then copy it to the internal storage....after that restart....and press backwards and volume down keys together and install the new ROM....by pressing the power key...

think this will help
try this will definitely work cause i have same problem too!!
read carefully and try it if u have this problem u have to use mitty everytime u flash(i think cause for me is every time i flash new ROM)
xxxx://forum.xda-developers.com/showthread.php?t=540290
replace xxxx with http

Thanks to all man. my problem is solved.

help: i tried everything to hard spl

hi everyone
hope u keeping well,
i bought htc diamond and i tried every thread here in the forum just to do hard spl for my device and its not working keep 0% till in the end i get error connection i went to htc website and downloaded rom from them the original and re-flash it on my device and it worked fine ... but when i try to use hard-spl so i can install any other rom like energy or any one its not working keep on the 0% .... my device DIAM100 and the spl on it 2.0.3 or some thing like that and i rly rly want to install custom rom pls help

any one pls ?

Problem Solved
A.J said:
hi everyone
hope u keeping well,
i bought htc diamond and i tried every thread here in the forum just to do hard spl for my device and its not working keep 0% till in the end i get error connection i went to htc website and downloaded rom from them the original and re-flash it on my device and it worked fine ... but when i try to use hard-spl so i can install any other rom like energy or any one its not working keep on the 0% .... my device DIAM100 and the spl on it 2.0.3 or some thing like that and i rly rly want to install custom rom pls help
Click to expand...
Click to collapse
download this, and run first the diamond-sspl.bat
if it runs successfully and ur screen turns black...then run DiamondCustomRUU.exe again to flash Hard SPL 1.24
in the folder u have diamond-sspl.bat and hard spl 1.23 and 1.24, run the hard spl 1.24 for HTC Diamond, then flash a cooked rom.
PM me is your problem solved
Good Luck

Hello, i had the same problem and i tried this solution with success, many thanks!

the problem now guys my dimoand not even connecting with the active-scyn through usb ... it connect as flash memory but refuse to connect through cable

You may have selected default as Disk Drive and ticked "Dont ask me again'
then you need to go to settings > connections > USB to PC and tick
"Ask about connection type when I connect"

Ive had the same problem ( connection 260) And tried the above, but i still get the error?

Tried that myself, and I'm stuck on the coloured screen with an error: Upgrade ROM code error please try again. DIAM500- SPL-0.62.0000 - MicroP-Diam (LED) vB. Doesn't leave this screen until I try to flash with nbh, and it gives communication error no matter whatI try. Bricked?