Develop Bugs

Internet Sharing and Vista

Hello, been using custel 2.5 for a while now, probably the day after it came out. Now I need to use internet sharing adn I`m not able to do it thru BT. When I pair my device I can do activesync just fine, but on Vistas BT manager (BT Devices) its not showing the dial-up device. This is strange it works fine with the USB connection, but I really need the BT. Please help. Thanks in advance.
BTW it used to work with wizard with WM6. Thanks

its not a dail up service to start off with its a PAN. second what BT stack are you using? I had the broadcomm stack first and that wouldnt work so i had to switch to the native MS stack and its works fine. If you know how to edit the bt.inf file on your vista machine that will install the MS stack instead of the other stack.

austinsnyc said:
its not a dail up service to start off with its a PAN. second what BT stack are you using? I had the broadcomm stack first and that wouldnt work so i had to switch to the native MS stack and its works fine. If you know how to edit the bt.inf file on your vista machine that will install the MS stack instead of the other stack.
Click to expand...
Click to collapse
Doesnt it show up in the dial-up services in vista bt device manager ? so i guess Im doint it wrong ? Is there a tutorial that I can see. I remmber on the wizard WM6 it just showed up as a dial-up device and I just dial it. How do I do it here ? Maybe I dont even have to edit anything, maybe Im just having a senior moment thx for the reply

believe it or not if you use your handheld's help program and search for internet sharing it will give you instructions on how to set it up. and no it does not show up on vista as a dail up network since it is not also search this forum for Bluetooth PAN and there is lots of info

doh I never even looked at help on the phone thanks I see how to do it now I see that on the wizard they used the old wm5 modemlink or whatever its called. thanks again but plz try to be nicer to ppl next time

yozh said:
doh I never even looked at help on the phone thanks I see how to do it now I see that on the wizard they used the old wm5 modemlink or whatever its called. thanks again but plz try to be nicer to ppl next time
Click to expand...
Click to collapse
I was being nice!! You should see me being mean!

hehe ok thanks for the tip I can't wait to get home and play

Its much better than WM5 i must say once you figure it out its so easy to use just click internet sharing and connect connect to your pc and your done its so easy

Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?

yozh said:
Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?
Click to expand...
Click to collapse
I noticed the speed decrease over PAN compared to the USB cable as well. I get way more fluctuations over BT. I am sticking to the USB but it is a nice fallback. Also, for me, Internet Sharing is a night and day difference over dial-up networking/modem driver. It is so easy. This feature is a WM6 gem!

yozh said:
Yeah got it working, works ok kinda slow, I get about 322k on dslreports.com/mspeed while on the phone I get around 800k on the phone it self and about 800 using the USB cable. Any suggestion on how to speed it up ?
Click to expand...
Click to collapse
Bluetooth is severely limited in Terms of speed, especially if you're not using Bluetooth 2.0 + EDR

gridpool said:
I noticed the speed decrease over PAN compared to the USB cable as well. I get way more fluctuations over BT. I am sticking to the USB but it is a nice fallback. Also, for me, Internet Sharing is a night and day difference over dial-up networking/modem driver. It is so easy. This feature is a WM6 gem!
Click to expand...
Click to collapse
Yeah just wish I didnt loose 500k over bluetooth

anyone else stuck with vista showing unknown device in device manager when usb tethering with internet sharing on mine it seems to work for 5 mins then disconnect and give up reverting back to unknown device. so im stuck with bluetooth

vista 64 bit
Hey Guys!
My first post with such a stupid problem:
i'm trying to connect to internet with vista 64bit using my hermes over usb. but it doesnt seem to work.
Until last week i had win xp sp3 on my pc and the internet sharing option in hermes worked without any problems. Now with Vista Ultimate 64 bit i can connect the phone to pc, sync works perfect.
when i start internet sharing, phone builds up a GPRS connection but after 2-3 sec it disconnects the data connection and active sync authentication starts with vista.
In vista i cant find any modem connection in network settings. The only thing i found was in device manager when phone is connected to pc (HTC USB Modem)
here is my spec :
- windows vista ultimate 64bit
- mobile device center 6.1
- Framework etc. is installed
my Hermes:
- HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V3_WWE_02.10.2008
- SPL 2.10 olipro
- radio ver 1.54.30.10
i have re-installed the drivers and device center several times without success.
What the hell i forgot or what i'm doing wrong...
Are there any tools or drivers i should use?
My friend has a vista 32 bit system. with his pc its no prob...some rndis drivers installed itself and we began to surf.
But in my vista 64, i missed this rndis driver installation......
Please can someone help me, i'm so confused...

Try checking your firewall... maybe disable it to test and see if it works temporarily.

Alright, thank you i'll try it on monday when i'm in office...
Ive no i-net there so i must be prepared, so are there any specific drivers or something i need to download? Or is device center enough?

Close Firewall doesnt really work...
Yesterday, i had a connection for one time...
In Device Manager, there was a "Remote ndis based Internet sharing device"
and internet worked...Today nothing works...
What have I to do in Vista? Should I deactivate some processes like wcescomm.exe? When I do this, It automatically restarts when Internet Sharing connection breaks down.
Could someone explain step by step how to get Internet Sharing work (Steps, Tools, Programs, Drivers)?!?
Thanks guys!

Same Problem
I am having the same exact problem.....
I HAD windows xp sp2 and everything worked fine once activesync was installed.....
I HAVE windows vista 64 bit and the device under the device manages show that its not working... it instals the RNDIS (whatever) drivers but dose not work...
I TRYed windows vista 32 bit, everything works fine..... the device conects with no problems...
SO the problem is that its VISTA 64bit so what would be causing this ???
btw my phone is a WM6 8525 from ATT with Internet Sharing
I need the internet sharing option when im at HomeHome and not at school, so im thinking about taking my laptop back to office depot!

So glad im not alone...
In meantime, in arranged with the prob... I think no one knows a solution...

[Solved] WM6 Bluetooth Sync...

[email protected]
i have a t-mobile mda3 Compact with PDAViet Black&Blue V3...
since i upgraded from WM5 to WM6 i can not sync to my PC over bluetooth..
can anyone with wm6 try this? maybe im only to stupid...
if it works.. pls tell me how...
thanks

Works just like it always did. Switched Bluetooth Radio on, started ActiveSync on my XDA and selected "Connect via Bluetooth" it than searched new Bluetooth Devices, found my Notebook with ActiveSync Service enabled and synced. Exactly the same as it was with WM5

doesnt work =(
that does not work for me... the following happens:
I enable bluetooth... open active sync and select connect via bluetooth...
A window pops up witch says : There is no Bluetooth Relationship with an ActiveSync enabled PC. Would you create a relationship.
If i click on Yes i get to the Bluetooth settings tab were i can enable / disable bluetooth.
If i create the bluetooth partnership myself, the same happens in Active Sync...
any ideas?? pls help me... i really need this.

Its workin now... had to create an incoming comport for bluetooth on my pc and activate it in active sync

Fracoon said:
Its workin now... had to create an incoming comport for bluetooth on my pc and activate it in active sync
Click to expand...
Click to collapse
Could you please explain to me more slowly I am sorry I am noob, I have the same problem

Finaly the problem solved. You are right it is because of incoming port. But another reason why in the begginning I don't know your statement about incoming port is because the application and the driver of my Bluetooh donggle which come with the device has different user interface. No incoming port is stated there . When I delete this driver and use the driver which includes from window XP, and try to pair it again, everything solved.
Thank for the information

Can't connect with activesync anymore

Hi,
I've got a weird problem with my MDA compact III (T-mobile Netherlands, original ROM).
For some reason I don't know the active sync doesn't seem to identify the phone anymore.
I know there are a lot of problems with active sync and I've read and searched a lot of those threads but I can't solve my problem.
Active sync always ends up with the message that there is no phone connected whereas it is.
I tried different versions of active sync and different PC's (WIN XP SP2), deleted partnerships both on the phone as well as in active sync, I changed the name of the phone which it uses to identify on connection.
No matter what I tried, nothing could solve this.
The only way for me to exchange data at this moment is using wm5torage and using CAB's to install.
Please help!!
PS: A hard reset is not an option since I need to continue with the tools and files that are currently in the ROM.
Thanks in advance

mauce said:
Hi,
I've got a weird problem with my MDA compact III (T-mobile Netherlands, original ROM).
For some reason I don't know the active sync doesn't seem to identify the phone anymore.
I know there are a lot of problems with active sync and I've read and searched a lot of those threads but I can't solve my problem.
Active sync always ends up with the message that there is no phone connected whereas it is.
I tried different versions of active sync and different PC's (WIN XP SP2), deleted partnerships both on the phone as well as in active sync, I changed the name of the phone which it uses to identify on connection.
No matter what I tried, nothing could solve this.
The only way for me to exchange data at this moment is using wm5torage and using CAB's to install.
Please help!!
PS: A hard reset is not an option since I need to continue with the tools and files that are currently in the ROM.
Thanks in advance
Click to expand...
Click to collapse
Ok ... I have seen your problem many times and yes there are many other threads on it . But lets see since im woke if I canhelp you crack this little apple . 1st what you mean by you can't hard reset you need to continue wuith tools . 2nd when the phone is connected to your computer does it charge ? Do you see it connect in the device manager ? 3rd of you plug your phone to the charger does it charge as well.
Now if these question are yes then 1st I would say reboot your computer and soift reset phone ... If that doesnt solve the problem then we will goto next step.

I have a similar problem :
facts :
1. the usb cable charge the battery correctly.
2. The Headphones and mic are working well.
3. No data connection ( both activesync and WM5Storage )
4. Back from long journey using as navigator so the car holder and the car charger my have damaged the data pins ?
5. Reinstalled activesync on the PC , tried different PC, tried different Usb Cable, soft resetted an hard resetted the device but no success.
Please give me some suggestions before going to repairing service.
Thanks

maurizio.n said:
I have a similar problem :
facts :
1. the usb cable charge the battery correctly.
2. The Headphones and mic are working well.
3. No data connection ( both activesync and WM5Storage )
4. Back from long journey using as navigator so the car holder and the car charger my have damaged the data pins ?
5. Reinstalled activesync on the PC , tried different PC, tried different Usb Cable, soft resetted an hard resetted the device but no success.
Please give me some suggestions before going to repairing service.
Thanks
Click to expand...
Click to collapse
Sounds as if all is working . And what ever you were trying on the phone has an adverse effect ? What are these tools that are keepimng you from hard resetting ? I believe there is another program for connecting to this cell let me rack my brains while I think ...

PURESKILLZZZ said:
Ok ... I have seen your problem many times and yes there are many other threads on it . But lets see since im woke if I canhelp you crack this little apple . 1st what you mean by you can't hard reset you need to continue wuith tools . 2nd when the phone is connected to your computer does it charge ? Do you see it connect in the device manager ? 3rd of you plug your phone to the charger does it charge as well.
Now if these question are yes then 1st I would say reboot your computer and soift reset phone ... If that doesnt solve the problem then we will goto next step.
Click to expand...
Click to collapse
Hi PURESKILLZZZ,
Many thanks for taking you time to read my explanation.
Let me give you some answers:
1.) The reason for me is that in case of a hardreset I need to install all applications again. Actually I've been doing a hard reset and then afterwards restored a backup I created with spb backup. Unfortunately the problem was still there.
2.) Yes the phone charges when connected through USB (so it's not the connector that is faulty I guess).
The device manager I need to checkout didn't lok at that yet.
When I connect using wm5torage I can see the SD card in the explorer.
3.) The phone charges when connected to the charger.
So I guess the answer is yes to all your questions.
If you have more questions to be able to help me please let me know.
I'd like to tackle this problem.
Thanks in advance

I have a similar Problem:
facts:
1. Usb data cable charge the battery correctly
2. Headphones with mic are working well.
3. no activesync connection.
4. no wm5torage connection
5. tried different PC , different data cable ( the one than comes with PS3 ) , hard resetted the device but no success.
Any suggestions ?
Thanks in advance

I believe it is safe to say your present software is the issue and have you tried sktools for dong the back up .

maurizio.n said:
I have a similar Problem:
facts:
1. Usb data cable charge the battery correctly
2. Headphones with mic are working well.
3. no activesync connection.
4. no wm5torage connection
5. tried different PC , different data cable ( the one than comes with PS3 ) , hard resetted the device but no success.
Any suggestions ?
Thanks in advance
Click to expand...
Click to collapse
Well maybe if we find a solution to first guy yours may work as well...

PURESKILLZZZ said:
Well maybe if we find a solution to first guy yours may work as well...
Click to expand...
Click to collapse
i don't think so because i have no wm5torage connections so in my case i think is an hardware issue like data pins damaged ....

1 other thought ... A simple fix whichh may work . goto comm manager on your phone and click activeSync and see if that helps .

maurizio.n said:
i don't think so because i have no wm5torage connections so in my case i think is an hardware issue like data pins damaged ....
Click to expand...
Click to collapse
Did you jam the charger in the phone at anytime or did the phone drop while connected to charger . Just being connected for long periods of time dont hurt as I have ran my phone for over 24 hours connected to power while playing the radio thru the phone.

Unfortunately none of the suggestions worked for me.
It's not related to dropping the phone or taking hardware damage by faulty use or something.
This I know for sure since I own this phone only for a couple of weeks and didn't harm it in any way.
My conclusion also was that it must be software related, that's why I started this thread anyway.
Therefore I'm looking for suggestions/hints on the software side (most probably the problem would be on the phone and not on the PC, but what is it?........)

mauce said:
Unfortunately none of the suggestions worked for me.
It's not related to dropping the phone or taking hardware damage by faulty use or something.
This I know for sure since I own this phone only for a couple of weeks and didn't harm it in any way.
My conclusion also was that it must be software related, that's why I started this thread anyway.
Therefore I'm looking for suggestions/hints on the software side (most probably the problem would be on the phone and not on the PC, but what is it?........)
Click to expand...
Click to collapse
Ok .. Lets chase the possible software issues . What rom are you running and what have you installed ?

1 last note before I go take a power nap . You can check your activesync setting on the phone . goto => Start > Settings > Connections > USB to PC. Change the mode of the box next to Enable advance Network functionality. click ok .. Now try to connect ... The box is suppose to have a check in it but sometimes there are other reasons why it doesnt worj the defaukt way . I hope I have been of some assistance to you.

Similar issue
I had this same issue recently I thought it may be due to upgrading to activsync 4.5.
But it seemed not to make much difference when I attempted to work it on another pc using activsync.
The problem only occured after I had been using pocket mechanic to delete files and free up dead registry files.
I didn't want to do a hard reset straight away so instead I restored an older backup from before the issue started & since then the problem has been resolved.
So I guess the question is do you have an older backup than the one you have tried if so try it & see. Other than that a hard reset may well sort the issue?
Hope this helps, and serves as a warning to others don't delete certain reg keys even if a program (pocket mechanic) stated them to be empty or redundant unless you have a backup to restore when things go wrong!

JC#79 said:
I had this same issue recently I thought it may be due to upgrading to activsync 4.5.
But it seemed not to make much difference when I attempted to work it on another pc using activsync.
The problem only occured after I had been using pocket mechanic to delete files and free up dead registry files.
I didn't want to do a hard reset straight away so instead I restored an older backup from before the issue started & since then the problem has been resolved.
So I guess the question is do you have an older backup than the one you have tried if so try it & see. Other than that a hard reset may well sort the issue?
Hope this helps, and serves as a warning to others don't delete certain reg keys even if a program (pocket mechanic) stated them to be empty or redundant unless you have a backup to restore when things go wrong!
Click to expand...
Click to collapse
Yeah a backup is a good idea but most dont do that . And yeah some cleaners do remove more than they should.

PURESKILLZZZ said:
Ok .. Lets chase the possible software issues . What rom are you running and what have you installed ?
Click to expand...
Click to collapse
I'm running the official T-Mobile Netherlands ROM
My installed progs are:
anton tomov pocket mechanic
MASPware benzineverbruik
Google Maps
Microsoft .NET CF 2.0
Shannon and Keane pGCalSync
Pocket e-sword
Microsoft SQLCE 2.0
HudsonMobile Phonedashboard
------
I-mate WMP Today
MGSH Magicall
Scrary Bear Software Check Notifications
Noisette Software CedeFTP
BuildXPDA Bandwidth Calculator
Dinarsoft MemMaid
SPB GPRS monitor
Chi-Tai Dang BatteryStatus TD-plugin
Illium Software eWallet
GB-SOFT Tweak
Resco Today Plugin
Resco Registry Add-in
Resco FTP add-in
Resco Explorer
Microsoft Remote Display Control
Conduits Pocket IP
Thunder WM5torage
Tomtomt Navigator v6.020.7980
PC Counselor Tweaks2k2 .NET
Nyxbul Software Contacts Backup
SPB Backup APCp CalSyncUm
Modaco nodata
SBSH.Net Phoneweaver
Macromedia Flash Player ActiveX
oggsync.com oggsynccab
Mike Simpson Chardguru
Backmann Software Printboy
Shape Services IMPlus
HTC X-button 1.5
Spb Diary
LSDsl EasySetOwner
Daniel Herrero Bandswitch
Vicsoft ClearTemp
Acpecto Software Wififofum
Please advice...

mauce said:
I'm running the official T-Mobile Netherlands ROM
My installed progs are:
anton tomov pocket mechanic
MASPware benzineverbruik
Google Maps
Microsoft .NET CF 2.0
Shannon and Keane pGCalSync
Pocket e-sword
Microsoft SQLCE 2.0
HudsonMobile Phonedashboard
------
I-mate WMP Today
MGSH Magicall
Scrary Bear Software Check Notifications
Noisette Software CedeFTP
BuildXPDA Bandwidth Calculator
Dinarsoft MemMaid
SPB GPRS monitor
Chi-Tai Dang BatteryStatus TD-plugin
Illium Software eWallet
GB-SOFT Tweak
Resco Today Plugin
Resco Registry Add-in
Resco FTP add-in
Resco Explorer
Microsoft Remote Display Control
Conduits Pocket IP
Thunder WM5torage
Tomtomt Navigator v6.020.7980
PC Counselor Tweaks2k2 .NET
Nyxbul Software Contacts Backup
SPB Backup APCp CalSyncUm
Modaco nodata
SBSH.Net Phoneweaver
Macromedia Flash Player ActiveX
oggsync.com oggsynccab
Mike Simpson Chardguru
Backmann Software Printboy
Shape Services IMPlus
HTC X-button 1.5
Spb Diary
LSDsl EasySetOwner
Daniel Herrero Bandswitch
Vicsoft ClearTemp
Acpecto Software Wififofum
Please advice...
Click to expand...
Click to collapse
Almost every program you named I have installed various times . And I know from experience quiet a few of them clash . Biggest example is the anton tomov pocket mechanic and PC Counselor Tweaks2k2 .NET. Both of those running with the resco stuff is utter ciaos.

Hell this is complicated...
I have the same problem although my mda compact III (T-Mobile) is pretty new! Would it help to
a) install activesync 4.5 (I currently use 4.2)
b) to debrand it
Hope there is a simple solution... and many thanks in advance for it!!!

I had a similar problem, are you guys using a firewall? if so you may need to open a port or what I do is temporarily deactivate my firewall when I connect my orbit to my pc.
Hope that helps.

cant sync

hi ppl,
after the upgrade from 2003 to WM5, everything is ok but BA wont sync any more. It used to work fine with 2003, I bring it to my friend where we patched it, we didnt sync it there but his pc obviusly saw BA during the patching process.... When I brought it home my PC couldnt sync with BA any more.
When I put the BA in the cradly PC found it and let me explore the BA thru the active sync just like before but after that it report that he can not sync and that I recconect the device, after the reconnecting - same story. Exploring works ok all the time but syncing dont.
Im suspicious about the fact that PC didnt asked me about the new device after the wm5 patch and didnt asked me about the type of the partnership (you know guest and normal)...
Used to try without the firewall, didnt helped, and didnt know how to manage to connect it and sync it via the BT...
Any ideas regarding the syncing via the USB or if someone can me please explain BT sync process...
Can I sync it with the WIFI ad hoc wifi network ? how please ? That could help too maybe.
PC OS is XP SP2
Best regards !

try this...
make sure you have updated your activesync to the recent version. mine is 4.5
1. remove your BA from the cradle.
2. delete your mobile device profile in activesync.
(File-> Delete Mobile Device)
3. place your BA in the cradle
4. re-setup your mobile device.

ty active sync on the PC is 4.5...
tryed to reinstall it, deleted the folder, run registry cleaner, install it again and nothing changed...
Im suspicious that the problem is in BA, when I run active sync there it reports on some kind of info screen "to sync with the desktop computer, install Activesync on your computer and then connect this device. If your company support syncing directly with its exchange server blah blah"... Never saw this screen in the active sync on BA before...
It looked like PCs active sync before as far as I remember....
used to try to connect it with the BT, after the pairing with the PC BA shows the screen with the services that I want to use for that BT connection but the list is empty... Anyway they are paired in that moment (passkey passed)... When I click on the connect with the BT in the active sync on the BA it report that theres no BT paired devices in that moment and that I can pair if I want, I chooce PC on the next screen again but nothing happens...

sorry to hear that.
i guess if you're using BT to sync i cant help you with that.
i know there's a topic here somewhere about the BT Stack incompatibilities.
let's hope someone who had your error find his way into reading this.
------------------------
tragedy: life's a windows[tm] bliss... till one bug shows up and eats up your lifespan with stress in bugbusting.

looks like that PC cant read settings of the BA coz when syncing begins, PC report that he is retrieving settings but moment after that he report sync can not be completed succesfully....
Like theres some firewall in the BA which prevents pc from the reading of the settings.

Problem is solved, BA is upgraded to WM6.

always glad to hear someone has solved a problem.
even if my posts didnt helped a bit. ahaha...

BT and activesync

Hello fellows i need a little bit of your expertise, i cant sync with activesync via bluetooth, i´ve searched a lot in forums but i just cant find the answer, jiji
hopefully one of you guys can help me
tnx

chinito74 said:
Hello fellows i need a little bit of your expertise, i cant sync with activesync via bluetooth, i´ve searched a lot in forums but i just cant find the answer, jiji
hopefully one of you guys can help me
tnx
Click to expand...
Click to collapse
We need more specifics to your issue, as there are several solutions. depending on which bluetooth stack you're using.
SO tell us which OS you're using on your PC (or MAC)
And tell us which bluetooth stack (drivers) you're using so we can give you the help you need

i have windows xp sp2 and the bt is dell 355 + EDR thank you

chinito74 said:
i have windows xp sp2 and the bt is dell 355 + EDR thank you
Click to expand...
Click to collapse
Do you know what COM ports (COM ports numbers) for serial connections the bluetooth stack created. The reason why i ask is, if you know which virtual serial COM ports your bluetooth stack created (ex: COM Port 3, COM Port 4, COM Port 5) and which com port number your device is assigned when you are paired with your PC, then you can go to connection settings in activeSync on your PC and select conection via com port and in the dropdown, match the COM port your device uses when connected to your PC.
Then the next time you connect your phone to your PC via bluetooth, in the services section of your phone (after it scans your PC for services) one of those services should say "Activesync" when you check that and press OK you should be able to freely connect via bluetooth

ok, im gonna do that right now
tnx

in my phone services it appears activesync, but it does not connect, i have in the port com19 and in activesync i have it too but it just doesnt connect

chinito74 said:
in my phone services it appears activesync, but it does not connect, i have in the port com19 and in activesync i have it too but it just doesnt connect
Click to expand...
Click to collapse
You need to make the port on activesync either 6 or 7 for some reason those were the only two ports for me that appear in WM I am using 6.1 now. Also are you sure that the computer and the phone are both set up to be "visible" to each other? When you do a bluetooth scan from the computer without using activesync can you see the phone? On the phone you just turn on visibility after you enable bluetooth. On your computer I am not sure. Then once they have both established a connection you should be able to see the phone then setup your comports and select activesync as a service. This should enable you to sync bluetooth by selecting it in the menu from activesync. The problem that I am having myself is that when I try to sync the phone between my laptop work--and home the internet explorer favorites get messed up and i am getting an activesync error between files and favorites. What I have been doing is deleting the device and starting fresh however this sucks but at least i always have a backup either the laptop or the desktop

they are both visible, the problem that i have is that i cant use a 6 or 7 port inmy laptop, all the ports that i can make are 14,15,16 etc. so in my computer i cant open the 6 or 7 port
so its pretty crazy

Heres what you do
chinito74 said:
they are both visible, the problem that i have is that i cant use a 6 or 7 port inmy laptop, all the ports that i can make are 14,15,16 etc. so in my computer i cant open the 6 or 7 port
so its pretty crazy
Click to expand...
Click to collapse
Can you use the soleil drivers they have always worked well for me i to have had that problem. I ended up deleting everything and starting form scratch that fixed the problem. And yes that means the drivers on the computer. Also make sure that your not running the dell driver(might be toshiba stack) and the windows drivers this will cause conflict.

I am also having all sorts of bs with the Toshiba BT stack... need to find some compatable drivers.

so the thing is, i have to uninstall de dell driver and install a bluesoleil driver???
where do i find it?
i´ve already downloaded a bluesoleil driver but it didnt work