Hi everybody,
I have recently installed on my HTC P3300 a new ROM (AJE V1.70) and I have an issue to synchtronise with microsoft outlook web access via activesync 4.5 (via GPRS).
Activesync is giving me the following error message : the server cannot be found, please verify the name of the server.
Maybe on of you already had this kind of issue.
Thanks in advance for your help.
Related
Since I updated my Device to Crossbow I am no longer abel to sync with my Exchange-Server directly over the Internet neither does server syncronization work when connected to ActiveSync 4.5 or WMDC (I do not want to use push service). First I tried PDAViet 2.00.07 pro. Installed a Certificate and tried to use SSL, as I did with the old Aku 2.0 rom. The devices seems to connect and I can read "syncronizing folders" for half a second, then it stops. "View status" gives me the error-code 0x85010014. So I disabled SSL, which makes no difference. This morning I tought, there may be issues with that rom and installed Helmi WM6 c1.1 instead, but again no difference. Syncronization with the desktop works with no issues, but I have to sync. over the net troughout the day, when I am not at home. I've been reading a lot of articels about that error-code, but they are all mentioning activesync desktop problems, such as firewalls etc.
Can anybody help???
Hi xxl
I updated to Crossbow too, and i can syncronize without any problems with a 2003 exchange server.
The only problem i had is that i have to skip the check in activesync when i set up the connection with the exchange server.
If i don't skip that connection test i get an error and i can't connect to the server, but skipping that , allows me to set up the server and sync.
I tried Helmi, and Jwright, and both sync ok for me.
Good luck
This may be the issue of helmi's ROM
I use original WM6 ROM, sync with exchange 2003 sp2 and push email works fine.
As I use SSL, the only thing needed is to add ours CA certificate to trusted roots (created a CAB file that installs a certificate).
I use Helmi's rom v1.1 and it works fine.
mamaich said:
This may be the issue of helmi's ROM
I use original WM6 ROM, sync with exchange 2003 sp2 and push email works fine.
As I use SSL, the only thing needed is to add ours CA certificate to trusted roots (created a CAB file that installs a certificate).
Click to expand...
Click to collapse
Now I've tried the third rom (i-mate JASJAR Crossbow Rom 2.01.06 WWE), still the same issue. Of course I've also installed the nessesary certificate. In WM 5 AKU 2.0 SSL worked fine that way.
I dont know how to set up push mail, just tried to sync manually using Outlook Moblile or ActiveSync on the HTC.
antguada,
I dont know what you mean, I didnt recognize any connection test...???
tnx, for the replies, any other ideas?
Strange thing. I solved it and it was no issue of WM6. The public nic's IP was not on the list of permitted IP's of the OMA virtual directory. But I didnt change anything there and a few days ago I synced successfully with the old Rom...
Confused, but happy
Thanks for your advices!
Hi 2all.
I've recently got Blue angel and everything is working fine accept one anoying thing. When my device is on credle i cann't sync with exchange with error message i cannot reach the server. I have win mobile 5.0 flashed with Helmi_BA_WM2k5_AKU3.5_v1.4.CF2.
Before this update i was also on win mobile 5.0 but i don't know which version 'coz i got it in that condition. Anyway i was promted that is unable to obtain adress from dhcp even dhcp exist.
With wifi my sync, also as surf, working fine.
My question is... how to use internet connection via credle from my desktop.
THanks
I flashed LVSW WM6.0 ROM ( 3.30.0.9 version ) last night on my Hermes. After the flashing was done, the device was able to synchronize with the exchange server through my PC at the first, but it wasn't later. And the synchronizing is always failed with the exchange server through the GPRS later on. I checked the report and it reads
" Result: The server certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server."
and provides a " Support code : 0x80072F06".
This never happened on the platform of WM5.
Can anybody help on this issue?
Thanks a lot!
I had a same issue at past week.
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
YUKI- said:
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
Click to expand...
Click to collapse
I'm also having a similar problem. When I connect via usb I can sync with server. When I connect wirelessly, cannot sync. Get server name error. Do you have this file?
YUKI- said:
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
Click to expand...
Click to collapse
Hi YUKI-
Thanks for your input. Actually I'm using the good wince.nls said as without the good wince.nls Chinese is not readable. But the problem is still the problem.....Thank you all the same
Taking it back to first principals (assuming you have access to the server):
- what certificate is the server using? (one from your own CA or a third party one like verisign)
- has that certificate expired?
- if using a certificate from your own CA have you installed the root certificate on your phone?
- do the address on the certificate and the one you have entered on the phone match exactly?
- what happens if you turn off the SSL requirement on the server - do you get a different error or does it work ok?
- Do you have another phone you can test with? Failing that what about using Outlook Web Access on a PC over SSL, does that work okay without certificate errors?
randomelements said:
Taking it back to first principals (assuming you have access to the server):
- what certificate is the server using? (one from your own CA or a third party one like verisign)
- has that certificate expired?
- if using a certificate from your own CA have you installed the root certificate on your phone?
- do the address on the certificate and the one you have entered on the phone match exactly?
- what happens if you turn off the SSL requirement on the server - do you get a different error or does it work ok?
- Do you have another phone you can test with? Failing that what about using Outlook Web Access on a PC over SSL, does that work okay without certificate errors?
Click to expand...
Click to collapse
Hi randomelements,
1. There is not a certificate the server is using. And there is never a certificate required when I used the WM5 on my Hermes. Also my colleagues in US is using the WM6 and there is not any certificate required.
2. Turned off the SSL requirement, there is another error report reading " Your account in Microsoft Exchange Server does not have permission to synchronize with your current settings. Contact your Exchange Sever administrator." and a new support code " 0x85010004" was given.
3.a couple of days ago I used WM5 on my Hermes and there was not any problem. Before using the Hermes, I used the Magician and there was not any problem either.
It works well that using Outlook Web Access on a PC over SSL.
Well...it looks to be a big problem^_^ thank you all the same randomelements!
What version of exchange?
If 2007, the integration with WM6 is tighter than 2003 with WM5 or 6. When I set mine up I had to alter permissions on the Exch 2007 web site. There are pointers on the MS website of you search on that error code and exchange 2007. I dont have the info to hand, but can look on my system tonight.
greatg said:
I'm also having a similar problem. When I connect via usb I can sync with server. When I connect wirelessly, cannot sync. Get server name error. Do you have this file?
Click to expand...
Click to collapse
My situation is NEVER completed any ActiveSync via USB+PC and X01HT's Wireless connection. I think thats problem does not same.
And I am currently using japanese version crossbow. if you have another language with wince.nls, does not solved your issue with my attached a file.
Check the clock on your phone. A couple of times when I flashed I forgot to change the year and had my date set in 2006, which gave me invalid or expired certificate error.
I think I've got what the problem is. I flashed the black 3.01 ROM tonight. After the flash was done, I tried the syn immediately and it succeeded via the wireless connection. But when I replaced the original wincel.nls file with the one with Chinese supported, the syn was failed and I got the same error report.
The problem is I can't use the wincel.nls file without Chiese supported. What should I do?
Dear all,
I need to use my PDA to sync with the exchange server of my company. After I upgrade to Pro Black 3.0.1, the synchronization is fine. But after I install the CS-Star, the synchronization encounter a problem. It said "The security certificate on the server is not valid. Contact your exchange server admin or ISP to install a valid certificate on the server. Support Code: 0x80072F06". Then I hard reset my PDA and reconfig the PDA to sync with exchange server without install the CE Star. I can't see any chinese right now. Anyone have suggestion on this issue? Thanks a lot.
Have you synced with your PC? Sometimes after a hard reset, when I plug into my PC with Exchange Server configured, that message goes away.
Sometimes I never have an issue and do it all over the air. This has happened with many versions of Crossbow, even the M$ ROMs and I've always been able to get past it by connecting via USB and performing that first PC sync.
Search the board for your language change. It's a registry setting, but I've seen many posts on this subject and you should get used to searching the boards.
fanki said:
Dear all,
I need to use my PDA to sync with the exchange server of my company. After I upgrade to Pro Black 3.0.1, the synchronization is fine. But after I install the CS-Star, the synchronization encounter a problem. It said "The security certificate on the server is not valid. Contact your exchange server admin or ISP to install a valid certificate on the server. Support Code: 0x80072F06". Then I hard reset my PDA and reconfig the PDA to sync with exchange server without install the CE Star. I can't see any chinese right now. Anyone have suggestion on this issue? Thanks a lot.
Click to expand...
Click to collapse
there's problem with CE-Star with WM6. even windows live is impacted. since i figured out i'd just want to read chinese without typing it, you can workaround with a cab named sunglobepatch
http://forum.xda-developers.com/showthread.php?t=302878
Hello,
I upgraded to wm6 (elf version, rom 3.30.2.1, rom date 04/17/07, radio 1.43.00.00, protocol 32.76.7020.19H) and activesync 4.5.
When I reloaded all my outlook data first time, it worked fine. I have win xp, sp2, outlook 2003.
However, when I loaded teh rest of my software and tried to resync a few days later, I got "Activesync encountered a problem on the desktop. Support code 85010014" The activesync diagnostic reports a problem MS cannot solve and asks for a dump file to be sent to them, copy attched below.
Searching the forum did not come up with wm6 problems for that error code. Can anyone help?
Thanks
Richard Racer.
---QoS RSVP
Pinging Desktop gateway 2.252.42.3 started
Ping echoed successfully
Pinging Desktop gateway 192.168.0.1 started
Pinging - IcmpCreateFile failed, err = 11010
Pinging Device 169.254.2.2 started
Ping echoed successfully
Attempting to connect to device
Device operating system version 5.2.1413
ActiveSync is performing a sync, please wait......
Searching ActiveSync log file
Error found: p(2820) t(2660) TraceToFile -> ERROR in CItemEstimateMgr::_Execute : hr = 0x80004005 - ItemEstimateMgr.cpp(486)
Error found: p(2820) t(2660) TraceToFile -> ERROR in CCmdProcessor::ExecuteCmd : hr = 0x80004005 - CmdProcessor.cpp(186)
Error found: p(2820) t(2660) TraceToFile -> ERROR in CMsgProcessor::_DoExecute : hr = 0x80004005 - MsgProcessor.cpp(984)
A connection problem has been detected for which there is currently no known solution. Please click Send results to Microsoft to help Microsoft develop solutions to these problems.
Exiting
Try reinstalling ActiveSync ;-)