Since I updated my Device to Crossbow I am no longer abel to sync with my Exchange-Server directly over the Internet neither does server syncronization work when connected to ActiveSync 4.5 or WMDC (I do not want to use push service). First I tried PDAViet 2.00.07 pro. Installed a Certificate and tried to use SSL, as I did with the old Aku 2.0 rom. The devices seems to connect and I can read "syncronizing folders" for half a second, then it stops. "View status" gives me the error-code 0x85010014. So I disabled SSL, which makes no difference. This morning I tought, there may be issues with that rom and installed Helmi WM6 c1.1 instead, but again no difference. Syncronization with the desktop works with no issues, but I have to sync. over the net troughout the day, when I am not at home. I've been reading a lot of articels about that error-code, but they are all mentioning activesync desktop problems, such as firewalls etc.
Can anybody help???
Hi xxl
I updated to Crossbow too, and i can syncronize without any problems with a 2003 exchange server.
The only problem i had is that i have to skip the check in activesync when i set up the connection with the exchange server.
If i don't skip that connection test i get an error and i can't connect to the server, but skipping that , allows me to set up the server and sync.
I tried Helmi, and Jwright, and both sync ok for me.
Good luck
This may be the issue of helmi's ROM
I use original WM6 ROM, sync with exchange 2003 sp2 and push email works fine.
As I use SSL, the only thing needed is to add ours CA certificate to trusted roots (created a CAB file that installs a certificate).
I use Helmi's rom v1.1 and it works fine.
mamaich said:
This may be the issue of helmi's ROM
I use original WM6 ROM, sync with exchange 2003 sp2 and push email works fine.
As I use SSL, the only thing needed is to add ours CA certificate to trusted roots (created a CAB file that installs a certificate).
Click to expand...
Click to collapse
Now I've tried the third rom (i-mate JASJAR Crossbow Rom 2.01.06 WWE), still the same issue. Of course I've also installed the nessesary certificate. In WM 5 AKU 2.0 SSL worked fine that way.
I dont know how to set up push mail, just tried to sync manually using Outlook Moblile or ActiveSync on the HTC.
antguada,
I dont know what you mean, I didnt recognize any connection test...???
tnx, for the replies, any other ideas?
Strange thing. I solved it and it was no issue of WM6. The public nic's IP was not on the list of permitted IP's of the OMA virtual directory. But I didnt change anything there and a few days ago I synced successfully with the old Rom...
Confused, but happy
Thanks for your advices!
Related
I flashed LVSW WM6.0 ROM ( 3.30.0.9 version ) last night on my Hermes. After the flashing was done, the device was able to synchronize with the exchange server through my PC at the first, but it wasn't later. And the synchronizing is always failed with the exchange server through the GPRS later on. I checked the report and it reads
" Result: The server certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server."
and provides a " Support code : 0x80072F06".
This never happened on the platform of WM5.
Can anybody help on this issue?
Thanks a lot!
I had a same issue at past week.
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
YUKI- said:
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
Click to expand...
Click to collapse
I'm also having a similar problem. When I connect via usb I can sync with server. When I connect wirelessly, cannot sync. Get server name error. Do you have this file?
YUKI- said:
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
Click to expand...
Click to collapse
Hi YUKI-
Thanks for your input. Actually I'm using the good wince.nls said as without the good wince.nls Chinese is not readable. But the problem is still the problem.....Thank you all the same
Taking it back to first principals (assuming you have access to the server):
- what certificate is the server using? (one from your own CA or a third party one like verisign)
- has that certificate expired?
- if using a certificate from your own CA have you installed the root certificate on your phone?
- do the address on the certificate and the one you have entered on the phone match exactly?
- what happens if you turn off the SSL requirement on the server - do you get a different error or does it work ok?
- Do you have another phone you can test with? Failing that what about using Outlook Web Access on a PC over SSL, does that work okay without certificate errors?
randomelements said:
Taking it back to first principals (assuming you have access to the server):
- what certificate is the server using? (one from your own CA or a third party one like verisign)
- has that certificate expired?
- if using a certificate from your own CA have you installed the root certificate on your phone?
- do the address on the certificate and the one you have entered on the phone match exactly?
- what happens if you turn off the SSL requirement on the server - do you get a different error or does it work ok?
- Do you have another phone you can test with? Failing that what about using Outlook Web Access on a PC over SSL, does that work okay without certificate errors?
Click to expand...
Click to collapse
Hi randomelements,
1. There is not a certificate the server is using. And there is never a certificate required when I used the WM5 on my Hermes. Also my colleagues in US is using the WM6 and there is not any certificate required.
2. Turned off the SSL requirement, there is another error report reading " Your account in Microsoft Exchange Server does not have permission to synchronize with your current settings. Contact your Exchange Sever administrator." and a new support code " 0x85010004" was given.
3.a couple of days ago I used WM5 on my Hermes and there was not any problem. Before using the Hermes, I used the Magician and there was not any problem either.
It works well that using Outlook Web Access on a PC over SSL.
Well...it looks to be a big problem^_^ thank you all the same randomelements!
What version of exchange?
If 2007, the integration with WM6 is tighter than 2003 with WM5 or 6. When I set mine up I had to alter permissions on the Exch 2007 web site. There are pointers on the MS website of you search on that error code and exchange 2007. I dont have the info to hand, but can look on my system tonight.
greatg said:
I'm also having a similar problem. When I connect via usb I can sync with server. When I connect wirelessly, cannot sync. Get server name error. Do you have this file?
Click to expand...
Click to collapse
My situation is NEVER completed any ActiveSync via USB+PC and X01HT's Wireless connection. I think thats problem does not same.
And I am currently using japanese version crossbow. if you have another language with wince.nls, does not solved your issue with my attached a file.
Check the clock on your phone. A couple of times when I flashed I forgot to change the year and had my date set in 2006, which gave me invalid or expired certificate error.
I think I've got what the problem is. I flashed the black 3.01 ROM tonight. After the flash was done, I tried the syn immediately and it succeeded via the wireless connection. But when I replaced the original wincel.nls file with the one with Chinese supported, the syn was failed and I got the same error report.
The problem is I can't use the wincel.nls file without Chiese supported. What should I do?
I've been trying to find a better RDP client for my WM5 SPV M3100 - one which would allow me to save the password/username combo for each server.
I found a link here to WM6 RDP-Finster.cab and installed.
The program works fine as an RDP client except even when the 'Save Password' box is checked, it doesn't actually save the password !
Do I need to install something else to get this working ?
Dear all,
I need to use my PDA to sync with the exchange server of my company. After I upgrade to Pro Black 3.0.1, the synchronization is fine. But after I install the CS-Star, the synchronization encounter a problem. It said "The security certificate on the server is not valid. Contact your exchange server admin or ISP to install a valid certificate on the server. Support Code: 0x80072F06". Then I hard reset my PDA and reconfig the PDA to sync with exchange server without install the CE Star. I can't see any chinese right now. Anyone have suggestion on this issue? Thanks a lot.
Have you synced with your PC? Sometimes after a hard reset, when I plug into my PC with Exchange Server configured, that message goes away.
Sometimes I never have an issue and do it all over the air. This has happened with many versions of Crossbow, even the M$ ROMs and I've always been able to get past it by connecting via USB and performing that first PC sync.
Search the board for your language change. It's a registry setting, but I've seen many posts on this subject and you should get used to searching the boards.
fanki said:
Dear all,
I need to use my PDA to sync with the exchange server of my company. After I upgrade to Pro Black 3.0.1, the synchronization is fine. But after I install the CS-Star, the synchronization encounter a problem. It said "The security certificate on the server is not valid. Contact your exchange server admin or ISP to install a valid certificate on the server. Support Code: 0x80072F06". Then I hard reset my PDA and reconfig the PDA to sync with exchange server without install the CE Star. I can't see any chinese right now. Anyone have suggestion on this issue? Thanks a lot.
Click to expand...
Click to collapse
there's problem with CE-Star with WM6. even windows live is impacted. since i figured out i'd just want to read chinese without typing it, you can workaround with a cab named sunglobepatch
http://forum.xda-developers.com/showthread.php?t=302878
Hi everyone!
I have already posted this thread on the Modaco forum but I'm still getting no answer. I'm posting it here. I know there are a few threads about ActiveSync problems but none of them solves my problem!
I'm using an Orange SPV M650 (French branded HTC P3300) for a few monthes now, and I've been successfully syncing it with ActiveSync over Bluetooth from the beginning. At this time, I had created a BT COM port with the Windows Bluetooth stack, configured ActiveSync v4.5 to authorize connections through that port ; then paired my PDAPhone to the computer and checked the "ActiveSync" option that was available in the services listing. I was then able to sync using the ActiveSync application on my PPC.
A few days ago I deleted the USB Bluetooth dongle on my laptop from the "Device manager", it's been installed back successfully on the next reboot BUT now I can't synchronize. The "ActiveSync" service no longer appears in the services list of my computer from the device's BT configuration tool. I only have "Serial port" showing.
Reinstalled ActiveSync twice, didn't changed anything.
What should I do?
Thank you!
(here are a few screenshots, French language used)
Up! Nobody's an idea?
i can only suggest something i do when i have similar problems:
1. uninstall everything involved
2. manually clean up all involved registry keys
sometimes, the remainders of not completely uninstalled programs can cause problems if you install them again.
i never ran into your specific problem, but trying this will at least make you forget your synch problem for the 60mins you are busy.
...and sometimes, above procedure even helps!
I had to reinstall from scratch Windows XP for other reasons and the thing is still not working! I really don't understand, I'm wondering if I'm not doing something wrong... How should I do?
Hey..
Hey found this manual for you..
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Thank you. It's exactly that way that I'm trying! The problem is at step 12, the only service available on my paired computer is a "Serial port", not ActiveSync. I double checked that ActiveSync was properly configured on the correct serial port and it is...
i had this problem with XP, i sorted it out, but cant remembe quite how i did it, i have a feeling it was to do with the COM ports that you use for blueooth. upgraded to Vista and no problems, my suggestion is to go to vista, its much better then XP and everything works.
I have hardware unsupported under Vista (pro-soundcard) and my computer is a little bit too old (512 MB of RAM are fine with XP, won't be with Vista). Anyway I'm okay with XP, I won't change my OS just for an ActiveSync problem.
Anyway I updated my Artemis with the B&B 3.7 WM6 ROM and now it works... Was a problem on the phone I guess.
Thank you for your help
Hi folks,
I am constantly running into problem with activesync no matter what ROM I use. It appears to be syncing, but it doesnt change anything in the device! And in the end it gives an error code 86000107.
I have searched everywhere, and I guess a lot of us have encountered this problem using WM6.1, and I believe this used to be an issue when WM6.0 came out! But I never had this issue with WM6.0 until i upgraded to WM6.1
Here is my setup.
OS: XP
ActiveSync: 4.5
ROM: WM6.0 (back to the basics!)
I sync at work and also at home!
Click to expand...
Click to collapse
Sometimes I get this error message at home, and sometimes at work! So i really cant say this is machine, that is causing the issue!
Solutions that worked for me to fix this!
Uninstall and reinstall ActiveSync
Delete the error showing computers sync partnership in both device and also computer, then resync again
Some people say hard reset works for them, but I think its the same thing as above steps!
Anyhow, if anybody else has any other solutions please post your results! Or maybe there are some ROMS out there that doesnt do this, I would like to know them as well.
Related threads:
http://forum.xda-developers.com/showthread.php?t=371519
http://forum.xda-developers.com/showthread.php?t=377823
Thanks
I currently sync with activesync 4.5/XP at home.........and WMDC/Vista at work.
If I reinstall either existing ROM or a different ROM....and I want to keep the same device name......I have to delete the existing partnerships on each machine before the first sync after reinstalling the ROM........if I do not delete the partnerships first then it will automatically rename my device to something like WMxxxxxxxxxxx.
This is a little different than your situation since I do not get an error message.............but I have found that when activesync or WMDC get flakey....I just reinstall the application and start over.
After I flash WM 6.1 CRC , activesync seems don't detect phone .
Temporary solution : hardreset phone + reset pc .
Now I am Shadow CE fan . Same bug . Same solution. I guess it's WM 6.1 Bug.
chipsxj said:
I currently sync with activesync 4.5/XP at home.........and WMDC/Vista at work.
If I reinstall either existing ROM or a different ROM....and I want to keep the same device name......I have to delete the existing partnerships on each machine before the first sync after reinstalling the ROM........if I do not delete the partnerships first then it will automatically rename my device to something like WMxxxxxxxxxxx.
This is a little different than your situation since I do not get an error message.............but I have found that when activesync or WMDC get flakey....I just reinstall the application and start over.
Click to expand...
Click to collapse
I agree, I have to do the same thing too after fresh ROM install, or else it will pick its own name
I had that error earlier today when I was trying to sync my work email to my device.. I unchecked the box in activesync and let the device delete all the mail... then I checked my email box again in activesyncs settings and everything synced normally again.. it might be a windows 6.1 issue since I too have neverhad this problem before..
answaiksvoltage said:
I had that error earlier today when I was trying to sync my work email to my device.. I unchecked the box in activesync and let the device delete all the mail... then I checked my email box again in activesyncs settings and everything synced normally again.. it might be a windows 6.1 issue since I too have neverhad this problem before..
Click to expand...
Click to collapse
So is this connected to email syncing? This would make a lot of sense as WM6.1 ROMs have had other problems involving MMS, as well as some problems restoring emails and SMSs from backup files. My bet is that in making the threaded SMS, Microsoft messed with some part of the WM messaging program so that everything that touches it is having trouble.
Is everyone who has this problem trying to sync email?
larsuck said:
So is this connected to email syncing? This would make a lot of sense as WM6.1 ROMs have had other problems involving MMS, as well as some problems restoring emails and SMSs from backup files. My bet is that in making the threaded SMS, Microsoft messed with some part of the WM messaging program so that everything that touches it is having trouble.
Is everyone who has this problem trying to sync email?
Click to expand...
Click to collapse
Nope, I don't sync email at all on either of my PCs. Same error. One thing of interest someone pointed out, perhaps it has something to do with the MMS in wm6.1. I will try to flash my phone with wm6.1 no mms over the weekend and post back here (will be using PK9)
Try this.
disable "Advanced Network Functionality" under Settings->Connections->USB to PC to get the ActiveSync client on the PC.
RanDomIze said:
Try this.
disable "Advanced Network Functionality" under Settings->Connections->USB to PC to get the ActiveSync client on the PC.
Click to expand...
Click to collapse
I dont sync emails, but i get the same error! I am thinking it might be calender or something, I remember having lots of issues with syncing when WM6.0 first came out, but then it all went away for some reason.
Oh I always uncheck that adv network thing, it doest fix this error!
Try this.
Whenever I encounter ActiveSync syncing issue,
I rename PIM.vol file to something else (e.g. PIM.bak) and sync again.
Never failed to disapoint me yet.
RanDomIze said:
Try this.
disable "Advanced Network Functionality" under Settings->Connections->USB to PC to get the ActiveSync client on the PC.
Click to expand...
Click to collapse
Thank you RanDomize ! Works for me
Ok this thing is frustrating. I didnt get the error over the weekend as I was syncing only with my home computer. Now back to work again, and get the same god damn ERR msg again!!
Changed to schaps 4.40 beta, still the same if not worse!!
Ive tried everything. Syncing with two computers on 6.1 just doesnt work all together. The code happens one way or another.
hi
I'm running Shadow 2.1 TE and I get the same annoying issue.
Sometimes it goes fine for a few days and suddenly it f***s up.
Seems to be contact issue but I can't keep on reseting contacts.
Pain !!!
wuub said:
hi
I'm running Shadow 2.1 TE and I get the same annoying issue.
Sometimes it goes fine for a few days and suddenly it f***s up.
Seems to be contact issue but I can't keep on reseting contacts.
Pain !!!
Click to expand...
Click to collapse
I know its pain. But here is what seems to help!
Uncheck contacts from activesync options
let the pda sync
disconnect the pda, and connect and sync again
After it synced, check contact back again from sync options and allow it to sync
It wont show the error message now.
Now, if you go sync again with another pc, it will show the error message for that pc. Just have to follow the above steps again, until the error disappers.
Cheers mate,
but sucks to have to do it all the time...
Seems to be coming from certain roms only 'cause I don't have it with another WM6 ROM on an Elf... oh well guess I'll just have to be patient
wuub said:
Cheers mate,
but sucks to have to do it all the time...
Seems to be coming from certain roms only 'cause I don't have it with another WM6 ROM on an Elf... oh well guess I'll just have to be patient
Click to expand...
Click to collapse
Seems to be a problem with WM6.1 ROM's, we will see of Faria's new ROM can fix this!
ai6908 said:
Seems to be a problem with WM6.1 ROM's, we will see of Faria's new ROM can fix this!
Click to expand...
Click to collapse
Nope Faria's new one has the same problem too. Back to WM6.0 for now!!
ai6908 said:
Nope Faria's new one has the same problem too. Back to WM6.0 for now!!
Click to expand...
Click to collapse
for what ???
Disconnect then Delete all connection from your PPC and ActiveSync (Windows PC, Windows PC1, Windows PC2, etc) then try to synchronize again. works for me
ermenzegna said:
for what ???
Disconnect then Delete all connection from your PPC and ActiveSync (Windows PC, Windows PC1, Windows PC2, etc) then try to synchronize again. works for me
Click to expand...
Click to collapse
Yup it works for that time, and then when you sync again, I have to do it all over again! Its pain, so I gave up on WM6.1.