Related
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks
Since I updated my Device to Crossbow I am no longer abel to sync with my Exchange-Server directly over the Internet neither does server syncronization work when connected to ActiveSync 4.5 or WMDC (I do not want to use push service). First I tried PDAViet 2.00.07 pro. Installed a Certificate and tried to use SSL, as I did with the old Aku 2.0 rom. The devices seems to connect and I can read "syncronizing folders" for half a second, then it stops. "View status" gives me the error-code 0x85010014. So I disabled SSL, which makes no difference. This morning I tought, there may be issues with that rom and installed Helmi WM6 c1.1 instead, but again no difference. Syncronization with the desktop works with no issues, but I have to sync. over the net troughout the day, when I am not at home. I've been reading a lot of articels about that error-code, but they are all mentioning activesync desktop problems, such as firewalls etc.
Can anybody help???
Hi xxl
I updated to Crossbow too, and i can syncronize without any problems with a 2003 exchange server.
The only problem i had is that i have to skip the check in activesync when i set up the connection with the exchange server.
If i don't skip that connection test i get an error and i can't connect to the server, but skipping that , allows me to set up the server and sync.
I tried Helmi, and Jwright, and both sync ok for me.
Good luck
This may be the issue of helmi's ROM
I use original WM6 ROM, sync with exchange 2003 sp2 and push email works fine.
As I use SSL, the only thing needed is to add ours CA certificate to trusted roots (created a CAB file that installs a certificate).
I use Helmi's rom v1.1 and it works fine.
mamaich said:
This may be the issue of helmi's ROM
I use original WM6 ROM, sync with exchange 2003 sp2 and push email works fine.
As I use SSL, the only thing needed is to add ours CA certificate to trusted roots (created a CAB file that installs a certificate).
Click to expand...
Click to collapse
Now I've tried the third rom (i-mate JASJAR Crossbow Rom 2.01.06 WWE), still the same issue. Of course I've also installed the nessesary certificate. In WM 5 AKU 2.0 SSL worked fine that way.
I dont know how to set up push mail, just tried to sync manually using Outlook Moblile or ActiveSync on the HTC.
antguada,
I dont know what you mean, I didnt recognize any connection test...???
tnx, for the replies, any other ideas?
Strange thing. I solved it and it was no issue of WM6. The public nic's IP was not on the list of permitted IP's of the OMA virtual directory. But I didnt change anything there and a few days ago I synced successfully with the old Rom...
Confused, but happy
Thanks for your advices!
I flashed LVSW WM6.0 ROM ( 3.30.0.9 version ) last night on my Hermes. After the flashing was done, the device was able to synchronize with the exchange server through my PC at the first, but it wasn't later. And the synchronizing is always failed with the exchange server through the GPRS later on. I checked the report and it reads
" Result: The server certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server."
and provides a " Support code : 0x80072F06".
This never happened on the platform of WM5.
Can anybody help on this issue?
Thanks a lot!
I had a same issue at past week.
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
YUKI- said:
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
Click to expand...
Click to collapse
I'm also having a similar problem. When I connect via usb I can sync with server. When I connect wirelessly, cannot sync. Get server name error. Do you have this file?
YUKI- said:
Please change the WINCE.NLS at the \winodws by Good WINCE.NLS.
Good mean is right wince.nls same as your localized version.
Have you been installed any programs with the WINCE.NLS?
If so, I hope above information is usefull.
Click to expand...
Click to collapse
Hi YUKI-
Thanks for your input. Actually I'm using the good wince.nls said as without the good wince.nls Chinese is not readable. But the problem is still the problem.....Thank you all the same
Taking it back to first principals (assuming you have access to the server):
- what certificate is the server using? (one from your own CA or a third party one like verisign)
- has that certificate expired?
- if using a certificate from your own CA have you installed the root certificate on your phone?
- do the address on the certificate and the one you have entered on the phone match exactly?
- what happens if you turn off the SSL requirement on the server - do you get a different error or does it work ok?
- Do you have another phone you can test with? Failing that what about using Outlook Web Access on a PC over SSL, does that work okay without certificate errors?
randomelements said:
Taking it back to first principals (assuming you have access to the server):
- what certificate is the server using? (one from your own CA or a third party one like verisign)
- has that certificate expired?
- if using a certificate from your own CA have you installed the root certificate on your phone?
- do the address on the certificate and the one you have entered on the phone match exactly?
- what happens if you turn off the SSL requirement on the server - do you get a different error or does it work ok?
- Do you have another phone you can test with? Failing that what about using Outlook Web Access on a PC over SSL, does that work okay without certificate errors?
Click to expand...
Click to collapse
Hi randomelements,
1. There is not a certificate the server is using. And there is never a certificate required when I used the WM5 on my Hermes. Also my colleagues in US is using the WM6 and there is not any certificate required.
2. Turned off the SSL requirement, there is another error report reading " Your account in Microsoft Exchange Server does not have permission to synchronize with your current settings. Contact your Exchange Sever administrator." and a new support code " 0x85010004" was given.
3.a couple of days ago I used WM5 on my Hermes and there was not any problem. Before using the Hermes, I used the Magician and there was not any problem either.
It works well that using Outlook Web Access on a PC over SSL.
Well...it looks to be a big problem^_^ thank you all the same randomelements!
What version of exchange?
If 2007, the integration with WM6 is tighter than 2003 with WM5 or 6. When I set mine up I had to alter permissions on the Exch 2007 web site. There are pointers on the MS website of you search on that error code and exchange 2007. I dont have the info to hand, but can look on my system tonight.
greatg said:
I'm also having a similar problem. When I connect via usb I can sync with server. When I connect wirelessly, cannot sync. Get server name error. Do you have this file?
Click to expand...
Click to collapse
My situation is NEVER completed any ActiveSync via USB+PC and X01HT's Wireless connection. I think thats problem does not same.
And I am currently using japanese version crossbow. if you have another language with wince.nls, does not solved your issue with my attached a file.
Check the clock on your phone. A couple of times when I flashed I forgot to change the year and had my date set in 2006, which gave me invalid or expired certificate error.
I think I've got what the problem is. I flashed the black 3.01 ROM tonight. After the flash was done, I tried the syn immediately and it succeeded via the wireless connection. But when I replaced the original wincel.nls file with the one with Chinese supported, the syn was failed and I got the same error report.
The problem is I can't use the wincel.nls file without Chiese supported. What should I do?
Hi Guys,
Has anyone got TomTom 6 working with WM6?
My TomTom Home on my PC is telling me that my device is incompatible
Cheers.
Works fine for me.
Im using Tomtom v.6.0 on my TyTN, and it runs like a charm.
WM6, tt 6.03 And tthome working sweet as
You might need to kill active sync to persuade tth to see the device again, oh and make sure you have latest version of tthome, not at pc right now so I havent a clue what it is
TTv6.0 works fine for me too in my Trinity
Same here, no issues
same here no problems with tt 6.03 and ax3l wm6 rom
I had a problem with TomTom after installing WM6. TomTom home kept saying that it didn't recognize my Trinity as a TomTom device. It took a few reboots of my PC and it finally agreed to let me reinstall TomTom.
I have been trying to install TomTom on my Trinity too. I am using WM6 too and it says the cab installation was unsuccessful.
I don't know why, it finds my device perfectly and installs the cab but I get the same message everytime.
Edit: DarkJedi is the f'ing man! He told me to copy the cab to my storage card and run it from there and it worked.
Thanks Matterhorn. That sounds like the issue I have. I'll give that a go.
Cheers all.
Be careful which WM6 ROM you use- some of them change the Device Code, preventing TomTom activation, and if that happens, and you have used your spare activation on TTCode.com, you will need to persuade TomTom to issue a new code, which can take up to 2 week's , and needs a copy of the origiinal proof of purchase for the device.
Another problem is that if you have to follow that route, although you can revert the OS to a previously activated one if you find WM6 not to your liking, TomTom Home cannot be reverted, and you won't be able to use it.
I'm using the Mun-Rus TE ROM, and it doesn't change the Device Code, but another WM6 Test ROM I used did change the code.
Works fine on my Trinity only when .NET 2.0 was missing there where some bugs.
If the activation lags there are some workarounds on the NET
TOMTOM 6 WM6 installation problem
I have exactly the same problem with the same error message....
Does anybody have an idea?
How can I check if GPS is enabled ?
Thanks.
Hello,
I've got a problem with Tomtom since one week. It turns off without reason, after some minutes. And when I restart it, it had lost my destination... So strange, isn't it ?
Anybody with the same problem ?
Thanks in advance.
Mister K, french user of SPV M700.
where can I get the cab-file?
maevro said:
I have been trying to install TomTom on my Trinity too. I am using WM6 too and it says the cab installation was unsuccessful.
I don't know why, it finds my device perfectly and installs the cab but I get the same message everytime.
Edit: DarkJedi is the f'ing man! He told me to copy the cab to my storage card and run it from there and it worked.
Click to expand...
Click to collapse
Where do I get the cab-file?
Michael
Hi
When accessing the following URL from PIE, I'm supposed to select the Login link to access the rest of the site. Yet each time I select the link IE gives me an option to save the file (Login.do) to my mobile, instead of entering the site (refer attached screen shots for details).
http://www.investecmobile.com
or
https://mobile.investec.com
I've since loaded Opera to mobile and the link works fine. Also from desktop PC the link works fine. Installine PIEPlus did not solve the problem. It seems it's related to PIE. Any ideas on how to solve this?
Running Storm WM6.1 on TyTN.
Thanks,