Network and sync - MDA III, XDA III, PDA2k, 9090 General

Hi 2all.
I've recently got Blue angel and everything is working fine accept one anoying thing. When my device is on credle i cann't sync with exchange with error message i cannot reach the server. I have win mobile 5.0 flashed with Helmi_BA_WM2k5_AKU3.5_v1.4.CF2.
Before this update i was also on win mobile 5.0 but i don't know which version 'coz i got it in that condition. Anyway i was promted that is unable to obtain adress from dhcp even dhcp exist.
With wifi my sync, also as surf, working fine.
My question is... how to use internet connection via credle from my desktop.
THanks

Related

Crossbow and Exchange2k3 syncronization

Since I updated my Device to Crossbow I am no longer abel to sync with my Exchange-Server directly over the Internet neither does server syncronization work when connected to ActiveSync 4.5 or WMDC (I do not want to use push service). First I tried PDAViet 2.00.07 pro. Installed a Certificate and tried to use SSL, as I did with the old Aku 2.0 rom. The devices seems to connect and I can read "syncronizing folders" for half a second, then it stops. "View status" gives me the error-code 0x85010014. So I disabled SSL, which makes no difference. This morning I tought, there may be issues with that rom and installed Helmi WM6 c1.1 instead, but again no difference. Syncronization with the desktop works with no issues, but I have to sync. over the net troughout the day, when I am not at home. I've been reading a lot of articels about that error-code, but they are all mentioning activesync desktop problems, such as firewalls etc.
Can anybody help???
Hi xxl
I updated to Crossbow too, and i can syncronize without any problems with a 2003 exchange server.
The only problem i had is that i have to skip the check in activesync when i set up the connection with the exchange server.
If i don't skip that connection test i get an error and i can't connect to the server, but skipping that , allows me to set up the server and sync.
I tried Helmi, and Jwright, and both sync ok for me.
Good luck
This may be the issue of helmi's ROM
I use original WM6 ROM, sync with exchange 2003 sp2 and push email works fine.
As I use SSL, the only thing needed is to add ours CA certificate to trusted roots (created a CAB file that installs a certificate).
I use Helmi's rom v1.1 and it works fine.
mamaich said:
This may be the issue of helmi's ROM
I use original WM6 ROM, sync with exchange 2003 sp2 and push email works fine.
As I use SSL, the only thing needed is to add ours CA certificate to trusted roots (created a CAB file that installs a certificate).
Click to expand...
Click to collapse
Now I've tried the third rom (i-mate JASJAR Crossbow Rom 2.01.06 WWE), still the same issue. Of course I've also installed the nessesary certificate. In WM 5 AKU 2.0 SSL worked fine that way.
I dont know how to set up push mail, just tried to sync manually using Outlook Moblile or ActiveSync on the HTC.
antguada,
I dont know what you mean, I didnt recognize any connection test...???
tnx, for the replies, any other ideas?
Strange thing. I solved it and it was no issue of WM6. The public nic's IP was not on the list of permitted IP's of the OMA virtual directory. But I didnt change anything there and a few days ago I synced successfully with the old Rom...
Confused, but happy
Thanks for your advices!

Problem on using Pro Black 3.0.1

Dear all,
I need to use my PDA to sync with the exchange server of my company. After I upgrade to Pro Black 3.0.1, the synchronization is fine. But after I install the CS-Star, the synchronization encounter a problem. It said "The security certificate on the server is not valid. Contact your exchange server admin or ISP to install a valid certificate on the server. Support Code: 0x80072F06". Then I hard reset my PDA and reconfig the PDA to sync with exchange server without install the CE Star. I can't see any chinese right now. Anyone have suggestion on this issue? Thanks a lot.
Have you synced with your PC? Sometimes after a hard reset, when I plug into my PC with Exchange Server configured, that message goes away.
Sometimes I never have an issue and do it all over the air. This has happened with many versions of Crossbow, even the M$ ROMs and I've always been able to get past it by connecting via USB and performing that first PC sync.
Search the board for your language change. It's a registry setting, but I've seen many posts on this subject and you should get used to searching the boards.
fanki said:
Dear all,
I need to use my PDA to sync with the exchange server of my company. After I upgrade to Pro Black 3.0.1, the synchronization is fine. But after I install the CS-Star, the synchronization encounter a problem. It said "The security certificate on the server is not valid. Contact your exchange server admin or ISP to install a valid certificate on the server. Support Code: 0x80072F06". Then I hard reset my PDA and reconfig the PDA to sync with exchange server without install the CE Star. I can't see any chinese right now. Anyone have suggestion on this issue? Thanks a lot.
Click to expand...
Click to collapse
there's problem with CE-Star with WM6. even windows live is impacted. since i figured out i'd just want to read chinese without typing it, you can workaround with a cab named sunglobepatch
http://forum.xda-developers.com/showthread.php?t=302878

Synchronisation Problem between activesync and webmail

Hi everybody,
I have recently installed on my HTC P3300 a new ROM (AJE V1.70) and I have an issue to synchtronise with microsoft outlook web access via activesync 4.5 (via GPRS).
Activesync is giving me the following error message : the server cannot be found, please verify the name of the server.
Maybe on of you already had this kind of issue.
Thanks in advance for your help.

Samsung i780 - "E1" ROM issues

I have flashed into the E1 English ROM (the one without the opera browser) and encountered some issues, I might have had them in previous ROMs as well, and I am wondering whether there is a solution for them:
1) Cannot set the IE homepage, it will always refer back to SamsungMobile
2) Cannot sync via Blue-tooth, even though a partnership is set with my PC, and ActiveSync is enabled I keep getting a message: "Cannot connect using Bluetooth to a PC that supports ACtivesync. You may be out of range. Would you like to create a bluetooth partnership with a different PC?"
Clicking Yes does not help here and the Bluetooth wont sync​
Did anyone find a resolution for this matters?
i have the original E1 rom, i dont think the activesync prob is related to the rom as mine has no prob activesyncing using BT since the A1 rom.
btw make sure u are using the latest activesync on the pc.
use your phone to detect your pc, not the other way around, then try activesync. if u still cant, use your pc's BT to establish a serial connection to the phone, then start activesync on your phone.

Tilt 2 as modem

I recently change my BB for a Tilt 2 but I haven't figure out how to use it as a dial up modem as I did with my BB are there any software or driver available for vista 64
Ive downloaded some driver but no luck!! any help will be apreciated!
internet search please:
http://forum.xda-developers.com/showthread.php?t=338003
I'm trying to use the phone as a dial up modem those instruction are for data sync any other suggestion
Welcome to forums
Have a deep read here:
http://forum.xda-developers.com/showthread.php?t=407563
Read, Search, Respect and Enjoy!
Well after reading the last thread I'm still having problems my notebook doesn't recognize the phone as a standard modem I've installed various vista drivers found on other threads still no luck!!
os windows vista 64
im using vista64. it shouldnt matter which version you are using because drivers are automatically installed when you connect via usb. when i first plugged in my tp2, it automatically set everything up. dont try to configure the modem crap in MyComputer, but rather just hook up via the internet sharing app on the tp2 or if your laptop supports wifi, enable wifi on your tp2 and search for the signal on your laptop. the above mentioned forum topics should have more than helped. its easier than you make it bro. btw, are your carrier internet settings correct? here are settings for Tmobile and ATT. hope this helps.
For sure give this thread a read: Wifi Internet Sharing
It's the easiest way to turn your phone into a router and get internet on your laptop. That said, if your laptop or desktop isnt wifi enabled then you'll just have to teather it using "internet sharing" I havn't seen a rom yet (even my stock ATT rom had it I believe) that doesn't have internet sharing built into it as a standard option in the com manager or in the connections settings.
if you dont have the internet sharing app, its HERE in this thread
This most be very disappointing for all of you that have tried to help me on this issue but I'm still having problems...
List of things tried already
1. Installed internet sharing but cant get the phone to connect via usb, the wifi recieve data I've tried the phone on my home network without sim card and it browses the net without problems but can't use it as a router with or without the sim card
2. Follow the att instructions but my phone has the media net setting locked and I can't edit them
"Media Net This connection is pre configure. It cannot be modify'
3. installed all kind of drivers still not recognized as a standard modem
Last drivers instaled was using wmdriverinstaler
Even gone to you tube!!
Toshiba satellite a305 wifi enabled
vista home premiun 64
att tilt 2 rom1.59.502.3 rom date 9/25/09 wm6.5
CE OS 5.2.21849 build 21849.5.0.63
att $30 unlimited data plan ("no thethering" din't need it with the blackberry since it work as a dial up modem)
I wont give up I like this htc better than my BB curve!!!
Is it a rom issue?
Drivers issue?
att plan that has to upgragded to tehter "won't go there"
Unlocking the phone?
Thanks!!
Have you tried connecting the laptop to the phone via Bluetooth (if you have that option on your laptop)? I was trying to get Internet Sharing going this way, and once I paired the two, I got an option to use the phone as a dial-up modem, rather than just sharing the phone's ATT data connection (which sounds like exactly what you are looking for). For some reason, I got this option when I connected via Bluetooth, and not USB. Also, I'm using XP, and not Vista, so I don't know if that will change the options.
quiquerc said:
This most be very disappointing for all of you that have tried to help me on this issue but I'm still having problems...
List of things tried already
1. Installed internet sharing but cant get the phone to connect via usb, the wifi recieve data I've tried the phone on my home network without sim card and it browses the net without problems but can't use it as a router with or without the sim card
2. Follow the att instructions but my phone has the media net setting locked and I can't edit them
"Media Net This connection is pre configure. It cannot be modify'
3. installed all kind of drivers still not recognized as a standard modem
Last drivers instaled was using wmdriverinstaler
Even gone to you tube!!
Toshiba satellite a305 wifi enabled
vista home premiun 64
att tilt 2 rom1.59.502.3 rom date 9/25/09 wm6.5
CE OS 5.2.21849 build 21849.5.0.63
att $30 unlimited data plan ("no thethering" din't need it with the blackberry since it work as a dial up modem)
I wont give up I like this htc better than my BB curve!!!
Is it a rom issue?
Drivers issue?
att plan that has to upgragded to tehter "won't go there"
Unlocking the phone?
Thanks!!
Click to expand...
Click to collapse
which rom are you using?
ok so if you are using the stock rom, why cant you connect? your settings are automatically set up on a stock rom. you must have done something in the connections settings to screw up your connection. just reflash the stock rom.
Well thanks for all the help and suggestions but the problem was the actual phone
I went to ATT and changed the unit and now it works fine I was able to connect via internet sharing using wifi apparently there was hardware failure with my original tilt
Thanks you for all your help!!!

Categories

Resources