Hello guys,
I have an I-mate JasJam .. a week ago i followed mrvanx's guide to successfully upgrade to schaps 3.30c . just two days ago my windows xp pro stopped recognizing my phone, it says generic USb in the device manager and sometimes it says HTC USB SYNC but with the exclamation mark .
I only managed to connect my phone with activesync 4.5 if "Enable advanced network functionality" IS ticked . and therefore windows recognize my phone as a Network adapter . And i can't flash my phone anymore as windows loses connection to the phone at the final step leaving the phone at the tri color screen
Tried and changed the cable but same problem .
Tried to use the microSD card flash technique to upgrade to schap's 3.54b and copied+renamed to HERMIMG.nbh to the root of my storage card but when i enter the bootloader mode i also end up with the tri color screen and the phone does nothing .
Been reading all over to solve this for the past 3 days but i can't figure out where the problem is
Is it possible that my phone got defected ?
here are some info from my phone :
ROM version : Schap's 3.30c
ROM date : 05/15/07
Radio version : 1.41.00.10
Protocol version : 32.74.7020.18H
Herm100
SPL-2.10.olipro
thanks a lot
hi,
following tries:
-unselect/deactivate "Enable advanced network functionality"
-turn your Computer off and Phone on
-connect Phone with Computer
-switch PC on
Is a stable connection between phone and pc?
You can flash much with the attitude sspl in RUU Wapper.
wfg
S64
I had some kind of this problem also. Try this one:
http://forum.xda-developers.com/showthread.php?t=332565
Related
Hi,
I just started with the ROM upgrade of my I-mate Pocket PC to 1.72.00wwe (obtained from the I-mate website) when my phone switched off. Now it only has (at the top) "Serial" and (at the bottom) "v1.06". No matter what I do - soft or hard reset nothing happens, obviously the power button also doesn't function. On my PC desktop I got the message that I need to reset my phone and re-connect.... can't get my phone going, so here I am.
The solution to my problem is (hopefully) simple ? I will really appreciate if you could help me with this ?
not a problem hopefully....u just made HimaClearJumpCode.exe run on ur device(this file exists in ur upgrade folder),and now ur stuck in the bootloader mode....
do the following:
1-hard reset ur device(it wont boot,off course)...
2-put it in the cradle,u should see that ur XP has found a new hardware(if it doesn't,change the USB port)
3-now run the himaupgradeUt.exe.
Now in case(just in case),those procedures didn't work,go to plan B.. :wink:
1-take the battery off ur Himalaya.
2-leave ur device for 12hours(it won't need all that time,but to be on the safe side,u know... :wink: ) without battery,so that backup battery drains...
3-put back the battery,recharge and enter the OS(this option wont work if u have erased the ROM)
4-rerun the upgrade...
good luck.....
RAGO :lol:
Hi
OK, what happens if the ROM is erased.... (judging by the fact that nothing happens when I put it in the cradle - with power on the cradle) ?
My phone was off for about 12-hours - blank screen when I got here this morning.
If I put it in the cradle (and after changing between all the available USB ports on my PC) the PC doesn't detect it - ActiveSync doesn't connect to the phone at all... Note : I have power on the cradle, and it's been a hour now - still just "USB" "v1.06" (or "Serial" if I take it out of the cradle).
:?:
so it is connected!!!!!!!!
since ur serial on the top of ur screen changes to USB when u put it in cradle,then it's connected.... :wink:
now just run the HimaUpgradeUt.exe in the folder that contains the NK.nbf file(32MB,it's the ROM),and it should start the upgrade....
be sure the NK.nbf is a Himalaya ROM....
good luck...
RAGO :lol:
Hi,
Thanks, did it just after posting my reply and everything worked out fine. Note, I just ran the ROM upgrade file (not HimaUpgradeUT), which I got from the clubimate webste.
Thanks, once again for helping me with this one.
Himalaya pocket pc - screen frozen on bootloader
Hi,
My problem is the same - but the difference is that whenever i run the himaupgradeut i get a connection error saying that the PC cannot identify the cradle as connected.
What should I do now?
Hi all,
after an error during a rom upgrade therefore a reset I got only serial and ver1.00 written on.
Doing the upgrade procedure (power-lamp-reset) -> usb to pc -> UpgradeUt.exe I get no connection established between pc and pda.
Unknown USB device (bold) on pc when pda restarts and should be ready for the download but no communication happened between devices.
Could you help me before I bin it ???
thanks in advance,
fabio
italy
Wrong unlock
After executing MaUpgradeUt_noID.exe in the screens appears Serial V1.00 and I cannot make any softreset or hardreset, can anyone help me???
Hello everybody,
I tried to flash my Diamond with the 1.13.25.24 version, but I had an error message at the end.
The error code is :
"PSOC_DIAM STAGE_PVT v0x30"
Now, I'm blocked at the multicolor screen wich asks me to upgrade my ROM.
Is it possible to connect my phone to my PC without Windows Mobile ?
I must transfer a good ROM and reflash the diamond again !
Yhanx for your help !
If you see the RGB and white screen (bootloader) and connect your phone to the PC - do you see the word change from serial to USB?
If so just flash new ROM by running the RUU from your PC - just ignore the suggestion that you must be connected to active sync.
Hope this helps
You're right !
When I connect my phone, "serial" => "USB"
Now, the pb is that I am at work and I don't have the .net framework.
So I can't execute "DiamonCustomRUU.exe" !
Is there any way with the buttons to run the diamond as external storage ?
Hi all, i just bought my HTC diamond today and it came with the spl 1.93.00.. I tried upgrading to the signed and unsigned versions of Olinex 1.93 hard spl..... But the process starts but the progress bar is stuck at 0% and is not moving.... Can someone please help me out.
Hi 1onew0lf,
I have very similar problem, spent the whole day trying to update to Hard-SPL
I have a MDA Compact IV - T-Mobile (German) version of Diamond.
The original SPL, if I go to a boot loader mode, shows:
DIAM200 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Vict STAGE_PVT v0x20
Click to expand...
Click to collapse
Original ROM Versions are:
ROM-Version: 1.93.111.2 GER
ROM-Date: 09/24/08
Radio-Version: 1.00.25.16
Protocol-Version: 52.29a.25.13U
Click to expand...
Click to collapse
When I try to run ROMUpdateUtility.exe after answering "Yes" (Ja) on the screen of Diamond on the request to place the enterbootloader.exe into \Windows directory the device goes black screen and never comes back.
After 1-2 min. the ROMUpdateUtility.exe utility gives an Error 260: CONNECTION and informs that USB is disconnected, the Active Sync is already long time grayed out.
I tried a trick described in the pinned forum to run SSPL manually: I copied SSPL-Manual.exe into a Temp folder on the device and launched it from Diamond with the same effect: black screen till I do a soft reset of device. I have found somewhere a tip to update the .NET CF to the latest version, and I did so have now .NET CF 3.5 on the device, it didn't solve the problem.
So I may assume that device somehow is not able to switch to SSPL mode, but nobody speaks of such problems!
Looking for anyone who may help us to solve this problem!
Thanks in advance!
yepiee! I actually did it! I managed to update to Hard-SPL
So, first of all the black screen IS actually the SSPL mode of device. My only problem was that USB drivers were not automatically configured. I'm not sure is it a problem with Windows XP SP3, or I messed up some settings for USB devices long time ago.
So what I did is before starting ROMUpdateUtility.exe I opened the Windows Device Manager and placed at the background. Then started the regular procedure of updating to Hard-SPL.
At the moment the screen of the device turned to black a new USB device appeared in the Device Manager, but with exclamation sing giving me a hint that no proper driver found/configured automatically.
Right click -> Update driver... -> Search for suitable driver - did a trick for me. I picked up a second driver from the list of choices with number 32 instead of 16. After the driver was successfully installed the update continued and eventually ended with congratulation message about successful update!
I hope my experience may help someone as well.
endlessspace said:
yepiee! I actually did it! I managed to update to Hard-SPL
So, first of all the black screen IS actually the SSPL mode of device. My only problem was that USB drivers were not automatically configured. I'm not sure is it a problem with Windows XP SP3, or I messed up some settings for USB devices long time ago.
So what I did is before starting ROMUpdateUtility.exe I opened the Windows Device Manager and placed at the background. Then started the regular procedure of updating to Hard-SPL.
At the moment the screen of the device turned to black a new USB device appeared in the Device Manager, but with exclamation sing giving me a hint that no proper driver found/configured automatically.
Right click -> Update driver... -> Search for suitable driver - did a trick for me. I picked up a second driver from the list of choices with number 32 instead of 16. After the driver was successfully installed the update continued and eventually ended with congratulation message about successful update!
I hope my experience may help someone as well.
Click to expand...
Click to collapse
Thx, your hint was very helpful!
Hi Guys
Currently i got the HTC HD with the next configuration
Rom version: 1.18.707.3 (23358)WWE
ROM date: 12/10/08
Radio version 1.09.25.14
protocol version 52.49a.25.26U
SPL-1.14.0000
BLAC100 32 m
I gone to bootloader and connected cable USB ( i see at the bottom of the device USB).
The ActiveSync is not green (mean it's not connecting), after reading again some posts i understand that the active sync shouldn't be green, as soon as i see USB, the PC and mobile connected.
Then i started with the HSPLWrapper_Blackstone_156OliNex.exe installation, when i press "Update" button then the original version is blank but the future version is 1.56 Olinex which is correct ( I think so) ?
The whole upgrade procedure stuck on 0% on the device and after 2 mins i gets the restore button on the PC (HSPLWrapper_Blackstone_156OliNex.exe installation).
Maybe i am missing something, in addition i saw some flush through SD card, but i think the better wasy if from the PC -> Mobile.
Any assistance will be appreciated.
Thanks for Help.
I am having the same issue.