Hi..
When attempting to update the rom of my trinity i get the 270 error. I am updating from default HTC rom.
Error 270 : update error
The image file is corrupted. Please check your update utility.
I have tried with several roms and to no avail.
Anyone have a solution?
Filgaliel said:
Hi..
When attempting to update the rom of my trinity i get the 270 error. I am updating from default HTC rom.
Error 270 : update error
The image file is corrupted. Please check your update utility.
I have tried with several roms and to no avail.
Anyone have a solution?
Click to expand...
Click to collapse
Just run the ROM again. It will work. Do not unplug your sync cord
jmermel said:
Just run the ROM again. It will work. Do not unplug your sync cord
Click to expand...
Click to collapse
I have already tried that. Did nothing.. any other ideas ?
Filgaliel said:
I have already tried that. Did nothing.. any other ideas ?
Click to expand...
Click to collapse
I get the same problem. However, when I run the ROM update the second time it works perfectly. There is another link somewhere that says the same exact thing..
jmermel said:
I get the same problem. However, when I run the ROM update the second time it works perfectly. There is another link somewhere that says the same exact thing..
Click to expand...
Click to collapse
Strange. With me the updater stops at 1% every time.. and the the phone restarts..
Error
Filgaliel said:
Strange. With me the updater stops at 1% every time.. and the the phone restarts..
Click to expand...
Click to collapse
Get a new copy of the ROM update and try again
jmermel said:
Get a new copy of the ROM update and try again
Click to expand...
Click to collapse
Yup, done it with several roms.. same outcome every time..
Filgaliel said:
Yup, done it with several roms.. same outcome every time..
Click to expand...
Click to collapse
Try a different computer. Not Vista
Filgaliel said:
Hi..
When attempting to update the rom of my trinity i get the 270 error. I am updating from default HTC rom.
Error 270 : update error
The image file is corrupted. Please check your update utility.
I have tried with several roms and to no avail.
Anyone have a solution?
Click to expand...
Click to collapse
Did you use CID Unlock,hardspl?
Start it off by down that,once you unlock the phone,hardspl and restart pc and trinity,this might work.
jmermel said:
Try a different computer. Not Vista
Click to expand...
Click to collapse
I have the same problem.I tried another computer xp sp2 . but problem is not solved.
I have mda compact 3 - artemis touch 1.0 rom
1.12.00 spl
any idea ?
I resolv this same problem installing original WM5 HTC ROM
mankimanki said:
I have the same problem.I tried another computer xp sp2 . but problem is not solved.
I have mda compact 3 - artemis touch 1.0 rom
1.12.00 spl
any idea ?
Click to expand...
Click to collapse
Try going to the Artemis forum instead of the trinity forum.
However, I happen to know that you will always get this if you do not use the USPL for the ROM each time you flash your artemis. They are difficult compared to the Trinity. Last time I updated an artemis there was no Hard SPL remover (SPL is Service Providor Lock by the way) (ie you could not run an updater that will let you update your device with any ROM in the future). you need to run USPL every time before flasing your phone.
I have tried firstly. to update my rom
finally. i am successfull. to update my htc p3450 windows 6.0 to 6.1. thanks for help.
yup
the same as mine but i reach 2% and it stop and my phone resets then it show error 270 update error ,.. my phone is htc touch elf p3450 need some help in this one it is my first time to do this so plss help me,..
Related
I try to upgrade ROM by SER-v1.2 for my ET180,
When I run XDA-developers-SER-v12.exe,
error occur:
ERROR: GetDeviceData - Unspecific error
error getting devicedata
does anyone know the reason?
thanks
I think the problem is, that the ET180 isn't a HTC Wallaby device.
Never heard this name before......
HTH
Stefan
xiaobaoping1 said:
I try to upgrade ROM by SER-v1.2 for my ET180,
When I run XDA-developers-SER-v12.exe,
error occur:
ERROR: GetDeviceData - Unspecific error
error getting devicedata
does anyone know the reason?
thanks
Click to expand...
Click to collapse
i'm having the same problem. ive got many roms. all of them are showing the same errors. its synced in properly. iam running 1.66 on my O2 XDAII . ive cooked up my own rom which i want to install. or maybe 1.60. 1.66 is not stable, i'm having a lot of problems with sound & missed calles etc.
hyper said:
i'm having the same problem. ive got many roms. all of them are showing the same errors. its synced in properly. iam running 1.66 on my O2 XDAII . ive cooked up my own rom which i want to install. or maybe 1.60. 1.66 is not stable, i'm having a lot of problems with sound & missed calles etc.
Click to expand...
Click to collapse
Are you trying to flash your XDA II with a cooked ROM made for XDA I ??!!
no ... whichever rom i try... i get the same problem...
1. i double click the rom exe file.
2. a small dos window opens up, where i presume its trying to get some data from the phone.. it shows... FAILED TO GET DATA FROM PHONE...
3. the installation window open .... when i click NEXT.. it shows error getting data from phone. please check USB connection etc..
i phone is synced properly before i start the installation. i tried it by disabling the sync as well.
i even tried the i-mate 1.72 rom version . same thing. i even tried the A3.09 cooked rom for wm2003.
whats going wrong? is there a way i can run the exe on the phone itself, by transfering it to the documents file or something???
please let me know.. wierd thing is that i've got my O2 XDA II with 1.66 & not 1.60. i actually want to put 1.60, but when i log onto myxda.com & try downloading it, it says ur phone does not need to download it as it got a latat verion already installed.(obviously ive registered my phone there with my imei no)
any ideas?? please let me know. 1.66 is not stable & im having lots of problems with the sound. & sometimes i get a call, but my phone does not ring.
all this started with SBP's software.. especially Phone Plus II.
since ive removed it, its better but yet not good enough. maybe i should just do a hard reset. But how many times can i keep doing that??
its irritating.
hyper said:
i even tried the i-mate 1.72 rom version . same thing. i even tried the A3.09 cooked rom for wm2003.
Click to expand...
Click to collapse
I 'm totally confused!! ... which ROM you are using to flash which device ??!!!
cooked WM2003 ROMs (like 30.09 and 4.01.16) are made for only Wallaby devices (XDA I) ... the 1.60, 1.66, 1.72 ... etc are made for only Hymalia devices (XDA II) .... now what is the exact error you get when you are doing exactly what ?
when i try to upgrade ROMs (anykind, even just radio) i get:
ERROR 150: ROM UPGRADE UTILITY ERROR
This ROM Upgrade Utility does not design for your device.
Please get proper ROM Upgrade Utility and try again!
Click to expand...
Click to collapse
I used the MaUpgradeUt_noID.exe from the O2 files you uploaded. (i also tried what i think is a more recent version maupgradeut_noid_740.exe).
any idea what the problem is, and how to fix it? i've been trying different things, and different computers all day
OK HARD RESET CLEARED IT
I Have Tried Updating This Twice And When Its Flashing At 3 % I Get Error 270..and It Says The Image File Is Corrupted...anyone Know What Is It About??
URGENT HELP REQUIRED ON THE SAME !!
I tried to flash all roms on my phone... and the USPL tooo.....
but unfortunately I was un sucessful
Please help...
Take sim and memory card out and try again.
@[email protected] said:
Take sim and memory card out and try again.
Click to expand...
Click to collapse
and try, and try, and try until its done.
Or if you have Vista on you PC, just do it in XP.
jaatboyslim said:
I Have Tried Updating This Twice And When Its Flashing At 3 % I Get Error 270..and It Says The Image File Is Corrupted...anyone Know What Is It About??
URGENT HELP REQUIRED ON THE SAME !!
I tried to flash all roms on my phone... and the USPL tooo.....
but unfortunately I was un sucessful
Please help...
Click to expand...
Click to collapse
Hello my friend, this is a very wild guess, but maybe u should see if you have an active connection with your pc, then maybe, you should try to flash an official rom suited for your device.
If none of the above worked, just try the search button, it´s an amazing tool, believe me, sometimes it can do miracles.
Try that.
Cheers
Thanks all for the support..
but I'm still trying..............
download the ROM again, perhaps the previous download wasn't really 100% (98% or something), and that's why the image is corrupted.
Or try a different ROM.
Rename the ".nbh" in "ARTEIMG.nbh" copy to SD - root - and try to flash from SD as explained here: http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
For me the easier way to install a ROM. Without errors depending by the OS.
Good luck
Zecanilis said:
Or if you have Vista on you PC, just do it in XP.
Click to expand...
Click to collapse
I use Vista and have no problems to run uspl and flash.
Frannek said:
I use Vista and have no problems to run uspl and flash.
Click to expand...
Click to collapse
That's great for you...
have you tried re-downloading the rom? and re-flashing an original rom instead?
try searching the forum, somebody once suggested installing the XP device drivers for vista and it helped some people
Try Uspl Included in Touch roms
1- I think ur phone is locked ie. u have installed original rom.
2- I think the only uspl that will work will be included withen Artemis Touch Roms WWE WM6.1(3.01)(4.0)(4.01)(4.02)
Link http://forum.xda-developers.com/showthread.php?t=400452
Good luck
Just enter Airplane mode. Disable all connections.
Close this Thread .. My Work completed...
Hello all.
I have just bought an o2 Xda Ignito (aka HTC TOUCH DIAMOND).
I want to flash it to a cooked rom. And after reading up about it on this site, it would seem that I would need to install HSPL onto my device.
Well that is where the problem lies. I get the 262 error when trying to flash it with HSPL. I have even tried to do it the manual way (placing the SSPL onto the device, run it, then install it via my computer.
I still have no luck. I have tried this more than enough times with no joy...
I've read up on a few threads with the 262 error with no joy.
It just sticks on 0% and then the above error comes up. I can't understand why it wont work.
If you need any information let me know.
Cheers.
Hi,
What version of HardSPL are you trying to install?
R3PUBL1K said:
Hi,
What version of HardSPL are you trying to install?
Click to expand...
Click to collapse
I'm using this one
http://forum.xda-developers.com/showthread.php?t=416211
But I have tried 2 different HSPL versions.
One of them gave me the white loading screen and then it just froze
The other just gives me a black screen and stays black, although one time i did get the phone to show the % bar on the screen, but that froze on 0% too :\.
Thank you for the response.
So I presume then you tried the most common 1.4? What were the other two.
You could try this 1.93 (HERE) if not done so already.
Run this from your PC - during the process a message appears on you device screen asking to run an .exe (select yes) the the process should start. You may find that nothing appears to happen for a while, which is not the case.
Please do not do anything until you see the processed completely finished or the system error out.
R3PUBL1K said:
So I presume then you tried the most common 1.4? What were the other two.
You could try this 1.93 (HERE) if not done so already.
Run this from your PC - during the process a message appears on you device screen asking to run an .exe (select yes) the the process should start. You may find that nothing appears to happen for a while, which is not the case.
Please do not do anything until you see the processed completely finished or the system error out.
Click to expand...
Click to collapse
That is very strange, I used the 1.93 version before with no avil, this time it worked with this version! cheers
Glad it worked for you.
Happy flashing
DanMc07 said:
Hello all.
I have just bought an o2 Xda Ignito (aka HTC TOUCH DIAMOND).
I want to flash it to a cooked rom. And after reading up about it on this site, it would seem that I would need to install HSPL onto my device.
Well that is where the problem lies. I get the 262 error when trying to flash it with HSPL. I have even tried to do it the manual way (placing the SSPL onto the device, run it, then install it via my computer.
I still have no luck. I have tried this more than enough times with no joy...
I've read up on a few threads with the 262 error with no joy.
It just sticks on 0% and then the above error comes up. I can't understand why it wont work.
If you need any information let me know.
Cheers.
Click to expand...
Click to collapse
Bro you have a Diamond 2, this is your problem the Tutorial is for first Diamond.
AlexisRoj said:
Bro you have a Diamond 2, this is your problem the Tutorial is for first Diamond.
Click to expand...
Click to collapse
Where did you get the idea that he had the Diamond 2? he does not...
If you care to read the thread, you should notice that, and the issue is resolved.
R3PUBL1K said:
Where did you get the idea that he had the Diamond 2? he does not...
If you care to read the thread, you should notice that, and the issue is resolved.
Click to expand...
Click to collapse
Search in google "aka HTC TOUCH DIAMOND" and you find your answer
AlexisRoj said:
Search in google "aka HTC TOUCH DIAMOND" and you find your answer
Click to expand...
Click to collapse
There is no need for me to search - HE DOES NOT HAVE A TOUCH DIAMOND 2 - What he owns is a carrier customised Diamond (1st diamond) FFS.
See Here
and for your information this is the diamond 2 HERE
Please no more silly comments about it being a TD2
i own a htc diamond indian version. it has rom version 1.37.720.2.wwe. i downloaded the upgrade from official site. but it stops at 0‰ and gives error 262. what should i do
Hello
got a brand new unused Vodafone V1620 (PH20B2)
i tried to install ( nk.nbf) a windows 6.1 on my old but brand new device
at first it went through and struck at 6%
dont know what is the issue
i tried mtty
i tried removing battery removing card
tried disabling wces and tried hard soft every single effort.
cant get through 6%...
see attachments...
i know its simple problem but cant get through
neither i found those stock roms i required to re flash to stock eg 2003
Any help...?
please i have tried all tutorials, but correct direction will sort it out..
tnt4ever said:
Hello
got a brand new unused Vodafone V1620 (PH20B2)
i tried to install ( nk.nbf) a windows 6.1 on my old but brand new device
at first it went through and struck at 6%
dont know what is the issue
i tried mtty
i tried removing battery removing card
tried disabling wces and tried hard soft every single effort.
cant get through 6%...
see attachments...
i know its simple problem but cant get through
neither i found those stock roms i required to re flash to stock eg 2003
Any help...?
please i have tried all tutorials, but correct direction will sort it out..
Click to expand...
Click to collapse
Hello and Welcome,
we need a little bit more information...
Radioversion...
What do you tried in mtty?
have you successful flash WM2003?
Which rom you have tried... which flash program...
this is the refresh version of blueangel right?
thanks for the quote
tried this
RC5 23698 Multi-Rom
tried over this
MaUpgradeUt_noID
tried this as well
BA_VF_UK_14000_238_11300_Ship
tried mtty 1.41 i think so
and also in between when the phone was not passing 6% i tried to upgrade and successfully flash its latest radio i think it was 1.15
i followed the pdf..guide inside your signature..now the phone is struck and is totally lost in silver background showing usb and then serial message...
changed the pc, no luck.
tried changing windows to windows 7 from xp, installed drivers, done ..errorr 112 i think and same not been through 6%
please advise
d-two said:
Hello and Welcome,
we need a little bit more information...
Radioversion...
What do you tried in mtty?
have you successful flash WM2003?
Which rom you have tried... which flash program...
this is the refresh version of blueangel right?
Click to expand...
Click to collapse
see this error also
it comes after flashing ba_VF-UK_14000_23..
tnt4ever said:
thanks for the quote
tried this
RC5 23698 Multi-Rom
tried over this
MaUpgradeUt_noID
tried this as well
BA_VF_UK_14000_238_11300_Ship
tried mtty 1.41 i think so
and also in between when the phone was not passing 6% i tried to upgrade and successfully flash its latest radio i think it was 1.15
i followed the pdf..guide inside your signature..now the phone is struck and is totally lost in silver background showing usb and then serial message...
changed the pc, no luck.
tried changing windows to windows 7 from xp, installed drivers, done ..errorr 112 i think and same not been through 6%
please advise
Click to expand...
Click to collapse
this model..
d-two said:
Hello and Welcome,
we need a little bit more information...
Radioversion...
What do you tried in mtty?
have you successful flash WM2003?
Which rom you have tried... which flash program...
this is the refresh version of blueangel right?
Click to expand...
Click to collapse
tnt4ever said:
this model..
Click to expand...
Click to collapse
Please try my update tool in the RC5 thread...
still the same no luck
tried Update with nk.nbf file still not passing 6%
can you please advise why its mixing up...
if you can correct me with the actual update and nk.nbf files, will appreciate
d-two said:
Please try my update tool in the RC5 thread...
Click to expand...
Click to collapse
tnt4ever said:
still the same no luck
tried Update with nk.nbf file still not passing 6%
can you please advise why its mixing up...
if you can correct me with the actual update and nk.nbf files, will appreciate
Click to expand...
Click to collapse
try this WM2003 Rom...
http://www.mediafire.com/download/m4wwyntmzay/BA_WM2003_EN.rar