my xda IIs is showing only usb mode when connect to computer what to do next please help
navinjain said:
my xda IIs is showing only usb mode when connect to computer what to do next please help
Click to expand...
Click to collapse
Is it a black screen? with "USB Mode" at the top?
If it is, then your in Bootloader mode.
A soft reset should sort that out, unless your intending to upgrade, in which case leave it in Bootloader mode, and follow the Wiki:
Blue Angel Wiki
Related
While upgrading my XDAII to the new O2 rom, I got a connection error which tiole me to disconnect the xda and do a soft reset.
I did this and it's now stuck on the O2 boot screen and wont budge, wont connect via active sync and does nothing else when I hard reset.
Have I f**ked it up ??
Please help,
Tommy
Don't panic
Just reset the device, place it back in the cradle and re-run the upgrade. It doesn't require Activesync as the upgrade process looks after its own connection.
Make sure the cradle is connected directly into a USB port on your PC and not to a hub. Also make sure the power supply is connected to the cradle.
Thanks, but that doesnt seem to help, the program just says that their is no connection.
Do you have another PC you can use? or try using a different USB port.
tried it on both and nothing, It looks like the XDAII can't start up properly and that's why it can't establish a connection. As I said it's stuck on the O2 boot screen (the one with the bubbles on it) with the version nos at the bottom and does nowt else.
I feel sick...
Tommy
OK. I misunderstood. I thought you were in the bootloader screen. So you need to see if you can put the device into bootloader mode. Press the jog button (bottom middle front of device) and power button at same time whilst pressing the reset button. This (hopefully) will put you in the bootloader - a dark screen with Serial 1.xx displayed. Then when device is put in cradle it should change to USB 1.xx. Then you can re-run the upgrade.
Whayhey
DCS you are indeed the man!
Thanks for your help.
Tommy
i just tried to upgrade my xda IIs to wm5.0 rom. after i upgrade it, it halted on the screen 'serial' at the top, '2.07' at the bottom. how to solve it? while i plug in the xda usb cable into the device, the screen not changed to usb. how to solve it?
There are few things you may try:
1.Reset button
2.Remove battery and place it again
3.MTTY method
4.Last but not least try to learn to use Search
i tried the reset button...it also can't...if i dont have usb cradle, but i have usb cable (Xda) only. may i restore back wm2003se?
I have tried to flash a JasJar with the JASJAR_WWE_21208_212010_11500 files. I connected the Jasjar and started the update. After the Jasjar restarted he got stuck in the "USB v1.00" mode. I have tried to remove the battery and to reset it but as soon as i switch it on it just goes back to "USB v1.00" or serial v1.00
The computer does not recognize nor connect to it naymore.
Any ideas waht to do?
dosada said:
I have tried to flash a JasJar with the JASJAR_WWE_21208_212010_11500 files. I connected the Jasjar and started the update. After the Jasjar restarted he got stuck in the "USB v1.00" mode. I have tried to remove the battery and to reset it but as soon as i switch it on it just goes back to "USB v1.00" or serial v1.00
The computer does not recognize nor connect to it naymore.
Any ideas waht to do?
Click to expand...
Click to collapse
hello my friend ithink you stuck on boatloader please se related theards and posts
dont forget to take a look at wiki
if your problem dosen't solve continue this theard
Hi, i have thought it would be the boot loader mode too so i have had a look at some topics regarding that. When i try camera+reset+power it does not help. When i try to flash the unit with ranju-v76 it does find a problem but when it tries to recover it vista just says that the program has craches.
Any ideas waht to try or how exactly?
Thanks
dosada said:
Hi, i have thought it would be the boot loader mode too so i have had a look at some topics regarding that. When i try camera+reset+power it does not help. When i try to flash the unit with ranju-v76 it does find a problem but when it tries to recover it vista just says that the program has craches.
Any ideas waht to try or how exactly?
Thanks
Click to expand...
Click to collapse
Hi,
Bootloader combination key is Backlight + Power + Reset.
1] Make sure you connect the USB cable to main USB port on computer and
not the USB extesion / hub.
2] Remove any SD card you may have inserted in the card slot
3] try to flash again it must be completed
during a ROM flash (rom build with romkitchen), the flash procedure hangs with the "5 minutes..." notification. After a softreset i still get the "5 minutes" screen.
After this disaster, I'am not able to boot in to the bootloader screen anymore. Before this hangup, there was no problem to boot to the bootloader screen.
I reboot my XDA (wallaby) with "press the powerbutton en the resetswitch". The xda reboots, does not show the bootloader screen, but shows right away the "5 minute..." screen.
I have already tried the tool "pnewbootloader" without any result.
Activesync does regonize my anymore, says: not connected.
Is there a way the restore/rebuild/re-flash the bootloader on my XDA (qtek 1010) wallaby?
Thanks in advange.
Greetings
Patrick
Today i have tried to connect to my XDA (wallaby) with "mtty".
when i place my xda in the cradle, mtty is able to connect, but there is no "USB>" prompt.
When i take the xda out the cradle, mtty is unable to essablish an USB-connection. So i am sure that mtty is able to connect to the XDA, but only with out a promt. Due to that i am not able to send commands to the xda.
I also found the JTAG solution, but i'am not an electric expert (i am no good in solder). So the JTAG is no option for me.
I anyone has a solution i would be very thankfull.
greetings,
Patrick
Hi Eveyone
Help needed please.
I came by an XDA Orbit that refuses to work. The symptoms are as follows:
1. When power button is pressed to turn it on the 02 Splash screen comes on for about 3 seconds then some red writing flashes up on the top left of the screen. The phone then turns off. No matter what I do it always does this. Once I have been through this sequence once it won't turn on at all. The only way I can get it to work is to take the battery out for about 30 seconds and re-insert but it never gets passed the splash screen.
2. I can get it to go in to the boot loader mode (multi coloured screen) and if connected to my PC will show USB in the bottom right hand corner of the screen. However Activesync will not recognise it and I therefore can't upgrade the ROM to try and fix it.
3. I have tried to flash the rom from SDHC card but nothing happens
Anybody got any ideas or is it screwed?
Thanks for your help
just read the last line here
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Bricked XDA Orbit
So if you can't flash from a SDHC card how are you supposed to do it?
Is there any other way I can flash the XDA orbit or get it tom connect to my computer so I can flash it
Any help would be much appreciated
Thanks
you can flash it with sd
sdhc means sd high capacity and they are about 8,16gb
there are MILLIONS of threads about bricked devices,and at least a third of them is answered...please read before posting