I'm asking because, I've used a couple and they all seem to drop after a while of use, requiring you to soft reset eventually. Didn't notice this problem in WM5. My wifes MDA has 25Megs of available program memory at any given moment, and she never resets her device or uses hybernate or clears cache mem unless I do it (and yes, she uses quite a few programs daily). My device starts out at 25Megs and then slowly drops down to about 20, then after a couple more days, down to about 17Megs (that's the lowest I've gotten before I reset). And when it drops this low, I use Clear Tem to clean the cache and other temp folders. And I use Hybernate and I still can't get the memory back up to 20Megs. So is this just WM6 or could it be the ROM I'm using?
I'm currently running Meschle's O2 Premium ROM (which is great BTW). This ROM is much better on memory than some previous ROMs I've used but it does drop down like I mentioned above. Didn't bother me until the other day when I was trying to get some pics of some friends for my picture caller ID. The camera would not open because memory was too low. I had to soft reset. It was quite embarrasing. May have just been a fluke but just wondering. Anyone else notice this?
BTW I do not have the TF Cube installed and only the default contacts manager.
Other programs installed besides what's in the O2 Premium ROM:
Opera Mobile
iSilo (document reader)
Oxford Spanish Dictionary
Conjegator prog
TomTom Nav 6
Used HTC Home page editor to change appearance and icons on home page but I removed the program after changes made
Hmm, haven't noticed this fenomenon.. gues i never had same rom for more that 3 days..
kakainis said:
Hmm, haven't noticed this fenomenon.. gues i never had same rom for more that 3 days..
Click to expand...
Click to collapse
I'm thinking it has something to do with HTC Home. I know what you mean about being a ROM junkie. However, I'm trying to find one and perfect it. Currently, Meshle's ROM is the closest I've come.
shawndh said:
I'm thinking it has something to do with HTC Home. I know what you mean about being a ROM junkie. However, I'm trying to find one and perfect it. Currently, Meshle's ROM is the closest I've come.
Click to expand...
Click to collapse
I have faced this in most of the ROM's I have flashed...be it B&B or Meschle's or Fracoons or even NikMel's....
I think its something inherrent in WM6....I can say that as I used it in NikMel's and that does'nt have HTC Home and the same problem was there too...
It is typically this issue that makes be jump from one ROM to another - but they all end up the same - no matter how fast you make it by removing items or cleaning the ROM....guess you have to live with it...
devdarshan said:
I have faced this in most of the ROM's I have flashed...be it B&B or Meschle's or Fracoons or even NikMel's....
I think its something inherrent in WM6....I can say that as I used it in NikMel's and that does'nt have HTC Home and the same problem was there too...
It is typically this issue that makes be jump from one ROM to another - but they all end up the same - no matter how fast you make it by removing items or cleaning the ROM....guess you have to live with it...
Click to expand...
Click to collapse
OK. I know I'm not alone then.
Not, You aren't alone.
I have tried with all ROM posted here and have the same problem. I have made an own ROM based on original WWE and the same thing.
On WM5 this don't happens. It's not the HTC Home plugin, as my own rom is a clean ROM without anyting, and the memory goes down with the pass of the days. My friend with another Artemis P3300 have the same problems.
At the end, soft reset.
natxocc said:
Not, You aren't alone.
I have tried with all ROM posted here and have the same problem. I have made an own ROM based on original WWE and the same thing.
On WM5 this don't happens. It's not the HTC Home plugin, as my own rom is a clean ROM without anyting, and the memory goes down with the pass of the days. My friend with another Artemis P3300 have the same problems.
At the end, soft reset.
Click to expand...
Click to collapse
+1
Same here!
A daily soft reset restores the initial amount of "program memory". I think it's a WM6 issue too (memory leak somewhere?).
@+
On WM5 this did happen
Hi,
natxocc said:
(...)
On WM5 this don't happens. It's not the HTC Home plugin, as my own rom is a clean ROM without anyting, and the memory goes down with the pass of the days. My friend with another Artemis P3300 have the same problems.
(...)
Click to expand...
Click to collapse
On WM5 this did happen for some people (including me) and after months, this issue was finally solved.
http://www.europe.htc.com/support/faq.html?id=545&device=htcp3300
I have just upgraded my ROM to WM6 vanilla 2 hours ago and I am a bit worry about this as I do not want to experience the issue in WM6 again. For now, it has not happened.
Is this thread related to this WM5 issue ?
If this is related, is this possible to have the WM5 fix ported to WM6 ?
Cheers
dxs1 said:
Hi,
On WM5 this did happen for some people (including me) and after months, this issue was finally solved.
http://www.europe.htc.com/support/faq.html?id=545&device=htcp3300
I have just upgraded my ROM to WM6 vanilla 2 hours ago and I am a bit worry about this as I do not want to experience the issue in WM6 again. For now, it has not happened.
Is this thread related to this WM5 issue ?
If this is related, is this possible to have the WM5 fix ported to WM6 ?
Cheers
Click to expand...
Click to collapse
I have been using Meschle's Vanilla for last one week - no issues so far - even the leak is there but not that extensive...I start of with 26.75MB upon softreset and after d aday of using most of the apps incl. calls, tomtom, activesync - I have never really gone down below 20MB - but I do make it a point to use the Oxios closeApp and Hibernate as often as I can...
I reset once in maybe 3-4 days that too if I feel there is a drag...battery life is superb...no complaints whatsoever...
Have no reason to switch ROM's anymore untill I see something that really fancies me...or a RADIO/OS or build upgrade...
Related
Hi,
I would like to get some peoples thoughts/feedback on the different WM6 ROMs available.
I have a Dopod 838 Pro and am probably going to flash it purely to see if any extra functionality can be gained out of it & seeing as i have Windows Vista on my Laptop, it seems logical to have WM6 on my XDA
XDA Live & LVSW seem to be looking the most populat of the current flavors around?
Any comments?
I'm actually just flashing the device now with LVSW but was reading some of the posts about XDA Live & it seems tempting...
I guess i may aswell mention i'm also testing out Telstra NextG at work, so anything which will make the radio more responsive & reliable is going to go down well in my books.
If mine goes good, then i might have to do the same for one of the managers at work who has the i-mate jasjam but with the current Telstra ROM on there it is performing like a snail in a sand pit.
All comments appreciated, seeing as i'm the guinea pig at work for most of this stuff.
Thanks.
I tried first LVSW, and run into installation trouble. I got the infamous white screen, and after I made it work, it was really slow. Maybe all my mistake, don't know. I tried than XDA Live 2, and that installed like a charm, and works like a charm, very fast. I am using it since 3 days now, and did not have a single time to soft re-set - and that was necessary with WM5 at least 3 twice a day.
Hi there,
I have notice many users with i-Mate JasJam have upgraded to WM6 Black Edition V1.2.
Anyone have any comments or comparison to the other two?
I am currently own a JasJam with WM5 - this thing runs like a dog and having to soft re-set almost everyday - I am currently considering upgrade to WM6 but really not sure which one to go for.
Any advice would be really appreciated - thanks.
See this: http://forums.whirlpool.net.au/forum-replies-archive.cfm/664668.html
You may have to do that reg hack to enable nextg.. that was the first thing I noticed after flashing a non standard rom.. less band options.. being on plain ole gsm, it didn't bother me.. but that's the only place I've seen mention of it.
I flashed my Dopod 838Pro with Black 1.2 and couldn't be happier. It's really quick, as stable as I noticed WM5 to be, and (being an Aussie) I prefer to have a rom which was cooked here and has carrier settings for here. This was my first experience with flashing a ROM but I only intend to flash again with a later version of the Black ROM. I'd highly recommend it.
I began with the WM6 vanilla and then went to an earlier LSVW ROM. The earlier LSVW took 25 min to flash. I hear newer version takes 40 min to flash. Some have paniced and unpluged their phones temporarily bricking them.
I went back to the vanilla ROM. It takes a little tweaking to get it right but takes only a few minutes to flash. It's also stable. One does have to move the windows office icons around to use MS office.
Remember to SIM and CID unlock your hermes before flashing. Also, you'll have to use the keyboard fix cab for certain hermes versions.
I hear newer version takes 40 min to flash. Some have paniced and unpluged their phones temporarily bricking them.
Click to expand...
Click to collapse
nope...I installed the OS only version and it took about only 6 minutes to install.
you need an 'OS only' rom if you have already flashed the radio to the latest version.
WM6 Black 1.2 is the best IMHO. I used XDA Live for several weeks, but find Black more quicker and more stable, less soft resets etc.
My preference is with the latest LSVW. It has less baggage than WMBE but if you need the functionality of the extra software provided with WMBE then you should chose that.
I think there is not much difference in terms of stability between the two although there has been issues with white screen (more apparent with the LSVW apparently) tho I haven't been cursed with that yet. Most of the instability/compatibility issues lie within the software installed after flashing the OS.
If I'm correct, LSVW has not had the OS version number editted to allow BBC/GOODLINK to work on it but WMBE has. This is not an issue for me since I have no use for these programs.
There is also some more recent additions to the variety of WM6 roms tho they are based on the LSVW version.
I'm looking forwards to Jasjammings WMBE 2.0 which he claims to be based on a final version of WM6. This should be very promising and despite the various added features which I won't need I'll definately be installing.
I was using Vanilla at first, sometimes my TyTN hung up but not too often. Then XDA Live v.10, without any problems. Then I've tried Black Edition v.1.2 but it had issues with SPB Software, sop that was no good for me at all.. Now I'm trying LVSW 2007-03-26, so far so good.. but probably i will flash again to XDA Live v.30 when it's avalaible
If you experiment Unexpected Freeze in splash screen, and only a hard reset (sometime not) will fix the problem, and you are using a SuperStorage ROM:
Welcome to the: "SCC" (Superstorage Crash Club)
For more information: here, or here, or here, or you can post your personal experience.
At the moment, the club have 3 member... Those who want to join as?
I ended up making myself a Big Storage ROM instead of SS. Havent had any major problems out of the Big Storage yet either.
I have problems too.. SuperStorage ROMs are not stable at all.. too many problems with those..
The thing is.. if you want a lot of storage space, go buy Kaiser..
Shamanix said:
I have problems too.. SuperStorage ROMs are not stable at all.. too many problems with those..
The thing is.. if you want a lot of storage space, go buy Kaiser..
Click to expand...
Click to collapse
Or a Micro SD card would work fine for *most* people
But agreed... kaizer is the way to go if you need more ROM Storage
I tried SuperStorage, andit was great. After a few days though, some of my program icons changed to blank icons and stopped working. A soft reset later, and the phone freezes at startup. This happened with a cooked and a Pandora ROM. Tired a non-SuperStorage Pandora ROM and it's Extended ROM was unstable - it kept losing everything I saved in it for no reason. Installed vp3g's WM6 ROM, then another Pandora and my Extended ROM has been stable since.
While I applaud the expert who managed to come up with SuperStorage, I think it's just that one step too far for our phones at the moment. Shame.
I tried one Superstorage and it was very unstable. But the chefs cooking them deserve credit for trying to develope...they will keep fine tuning them.
I have been using t-lite for a long time. no crashes, no problems. didn't freeze even once. but there are some memory leak problems.
ok, let's join the group also. in such a manner i don't feel alone.
happen to my buddys phone too.. SUCKS!
Ive used a handful of big storage and super storage ROMs (around 5) and have only experienced memory leaks, no crashes. But the leaks are enough to keep me away
edhaas's super d-lite
Do a search for Super d-lite. Not only is it a super-storage rom, it is the most stable rom of any type that I know about.
It seems from some of the posts I have read that the superstorage roms that are going bad are based on the new 3.62. T-lite, as burkay posted is solid and based on T-mobile's 3.60, and Super D-lite is a hybrid between that and the one before (3.54?).
Perhaps you guys are barking up the wrong tree.
larsuck said:
Do a search for Super d-lite. Not only is it a super-storage rom, it is the most stable rom of any type that I know about.
It seems from some of the posts I have read that the superstorage roms that are going bad are based on the new 3.62. T-lite, as burkay posted is solid and based on T-mobile's 3.60, and Super D-lite is a hybrid between that and the one before (3.54?).
Perhaps you guys are barking up the wrong tree.
Click to expand...
Click to collapse
Tried also edhaas super d-lite and it had as well the same freezing issues as all
other superstorage roms I tried before. This is obviously not a kind
of issue in the ROMs themselves, but maybe a problem of several
devices floating around having flash memory cell problems (or
something like that). As you know I have created an own superstorage
rom and have same problems with freezing after some time of using
whilst many other people use exactly THIS rom for weeks now and
say it is awesome stable and have no problems at all. Myself ended up
in creating a big storage rom and use it stable since install. I though
use the extended rom space (unlocked) but with muuuuuuch care and
I feel not very comfortable with install programs in the extended rom
area.
With mtty.exe I discovered some bad blocks and maybe this is the key.
They can be recovered and show good now, but I am not sure if they
stay green now. There's some hints around how to recover. I posted
in one of the Shamanix threads (task 2a and so on). Maybe one could
point to the post and all affected people could run the test and post the
results.
Olioaglio
BTW: Great idea with the club, diezoo !! Maybe with the help of some others
the cause of the problem will be digged.
i've been running edhaas' super d'lite for a month now with zero issues.
venelar said:
i've been running edhaas' super d'lite for a month now with zero issues.
Click to expand...
Click to collapse
As I said before... I am pretty sure edhaas' and also my own
superstorage rom is absolutely OK out of the box.
IMO the issues are the devices on which they are flashed.
Olioaglio
stuck in splash screen with pandora naked 6 version, but didnt stuck with pandora naked 5 nonbigstorage version..
Hi all
--------------------------
EDIT: 2/11/2007
I appear to have found a solution to the 'long time to come back out of standby' issue:
i had a bit of a brianwave when I was learning about pagepools and decided to investigate WHY it was only Schaps' rom that took such a noticeable time to come out of standby whereas other roms such as VP3G's and shamanix's were pretty quick.
Initially i put it down to rubbish handset.lol. but then decided no. that isnt the xda way!
so, i downloaded 4 different ROMs, VP3G's, Shamanix, AustinSync and of course Schaps'. I was determined to get Schaps' working as his rom is most suited to my needs!
so, upon opening each of the roms using the pagepool change tool, i realised Schap's had a 4mb PP whereas others had 6mb
so, i thought, lets see what happens if we change the pagepool, so i did. and it seems to have worked. it still takes a short time to come out (i mean not instantaneous like on the wizard) but a LOT less than the Schaps with 4mb PP.
so, i ask ye fellow users to try changing the pagepool.
the tool i found was on these very forums at the following thread:
http://forum.xda-developers.com/showthread.php?t=323269&highlight=pagepool+change
and there it is!
so please, try it!
-----------------
I've been trying out schaps' various roms and i've realised it seems to take a while for the handset to come out of standby (i use the standby function a LOT) and sometimes you even have to press the power button twice!
is it just me that is experiencing this?
please dont get me wrong, ALL of schaps' roms that i have tried have been near enough perfect asides from this single issue. all the other roms i have tried despite coming out of standy instantaneously, they have other issues. issues which schaps dont have!
i just hope we can solve this slight issue!
w/thanks
duke.
Same here
I have ROM 3.54c from Schaps and I have the same problem... I find it VERY frustrating!!!
I was hoping that this would be fixed in version 4...
Good thread Duke_stix, I hope someone out there has the answer to our problem!
----------
HERMES 100
3.54c from Schaps
I haven't really noticed it yet really but its something that I have experienced on all the roms I try on occasion.
i use 3.60a
and it has a 1second lag before it comes out of standby. havent tried any other rom
Try VP3G's latest.... you would not be disappointed...Schap codes great ROMs, however when they are done and out of bugs.. but till then if you use your phone daily like most people do, then testing is not for you.
im not testing!
if you read my first post, i LOVE schaps' roms! the ONLY issue that i have found is the 'wakeup' bug, otherwise more or less perfect. with other roms, including VP3G's there are other slight problems like some today plugins missing, namely the wireless one, which i know there are alternatives and it can be downloaded and installed but id prefer it in rom from beginning!
there has GOT to be a way to fix this! perhaps a registry setting
schaps, if your reading this, please help!
U may have better luck posting this on the original schaps v4.0 thread!
Not a rom specific thing...
It's a Hermes specific thing.
The Hermes has always had problems coming out of stand by. Every rom I've used has had these lags. And yeah, some times I have to press the power button twice as well.
galaxys said:
U may have better luck posting this on the original schaps v4.0 thread!
Click to expand...
Click to collapse
i would and i have but in the last few hours ive had more responses concerning this issue than i have since posting in that thread a day or two ago!
Help wanted
This is a very important topic...
Because of this issue, my 8525 seems slower than the old 8125... Kind of annoying for a processor twice as fast...
Please... Anyone... Any clue????
This lag varies depending on what you have installed and whats running. When i boot my device in safe mode using spb pocket + the lag is basicly gone. So just free up some ram and put only the apps that need to be on device memory on the device memory, other non crucial apps should be put on starage device.
Not a memory issue
fone_fanatic said:
This lag varies depending on what you have installed and whats running. When i boot my device in safe mode using spb pocket + the lag is basicly gone. So just free up some ram and put only the apps that need to be on device memory on the device memory, other non crucial apps should be put on starage device.
Click to expand...
Click to collapse
I highly doubt that it is a memory issue since this happens on cold boots as well.
Moreover my Hermes currently has 22.8Mb free for storage and 19.7Mb for Program... Isn't this plenty?
ATI ImageON
Actually, isn't it what the ATI ImageON driver is supposed to fix?
Relating to all of this,, I wonder if the new Tytn 11 (Kaiser)with all its memory , experiences that same power/standby problem ? If the answer is yes, then either the problem (whatever it was) was solved, and we must learn what they have done differently in hardware or system. If they haven't fixed or improved immensely in the Kaiser, then someone out there (HTC) never have seen it as a major problem.. I personally have almost always had a lag, either on cooked or official.
on Hermes but not on Wizard
Actually, this problem is inherent to the Hermes - The wizard (slower processor and older model) is much faster to come out of stand-by. Someone at HTC must have messed up pretty bad - or ATI bribbed them nicely.
Hi,
I'm using the 3.60 full at the moment and didn't experience that, even I do use that version for a week and never recall have that issue as well, may be is physical unit related since some of you also discover the same symptoms.
Just sharing hope you don't mine.
Cheers,
Naru
TOPSIDE!solution has been found
its true
GldRush98 said:
Not a rom specific thing...
It's a Hermes specific thing.
The Hermes has always had problems coming out of stand by. Every rom I've used has had these lags. And yeah, some times I have to press the power button twice as well.
Click to expand...
Click to collapse
Yes thats is true its not a rom specific thing. I use the dopod original rom and still it takes that long and some times i do need to press it twice before getting it awake...
Minimo guilty?
I tried the 6Mb pagepool trick on Schap's 4 ROM and the delay seemed to have shortened. However, after installing and uninstalling Minimo, I noticed a significant slow down of mt TyTn... It seems that the delay is back...
Am I the only one in this case?
As post title, has anyone on here actually used b&b 4.3 AND Touch 3.01?
Everyone that posts seems to have a preference between the two, but most people are judging the newer version of one against an older version of the other.
I would like someone who has used both to give their opinions on each and which one is better?
I am currently using b&b 4.3 and its wicked, but it seems to have slowed down a lot after some customisation so I am thinking of swapping to Touch 3.01 if its faster with similar features.
Cheers
I've tried them all
Meschle's tend to be faster than Tom's... and I'm not a huge fan of all black schemes...
I was using BB for a while, but found it slow, and switched to Premium Plus, which was ok, but also slowed down after a while.
I've now reverted to Vanilla 2.01 (a couple of days ago) and put on the Apps I need seperately, and speed, performance and battery life are much much better and instantly noticeable improvement, despite having to load on all the extras like Hbutton etc, and I don't overclock at all.
I tried both.
I agree with you guys that BB slows down after customization and installation of my favorite apps.
From the day Artemis Touch 3.01 (full no cube) released I use it till now. Very fast even with many apps installed. Plus memory leak is less than BB.
I 'm very happy with it. I will change it only if a newer release comes out.
Meschle did a great job (not that Tom did not ).
To me, the appearance of the rom is extremely important, and Tom's is much more graphically engaging than Meschle's.
Regarding speed, it hasn't really slowed down for me.
I only used Meschle's rom for a couple of days and probably would have stayed with it if the graphics (e.g. HTC Home buttons) were as good as Tom's.
Props to both chefs.
For me:
I've tried the touch 3.01 for about two days. It slowed down my htc and a I lost
plenty of storage..
So I changed to B&B. Now I'm very happy with this rom. It suits my requirements best.
I have a lot of storage left. And nearly no storage goes lost.
I'm realy satisfied with this rom - so I'm looking forward to the new release 5.0
Thx a lot Tom!
bye
peter
I installed Mesche Meschle Touch 3.01 Full with cube on the day it was released(11/11/07). Very happy with it, no hard reset until now. Soft reset usually about once a week. I would not change, only to update.
majo_scigo said:
I installed Mesche Meschle Touch 3.01 Full with cube on the day it was released(11/11/07). Very happy with it, no hard reset until now. Soft reset usually about once a week. I would not change, only to update.
Click to expand...
Click to collapse
How you u can do a hard reset on Touch 3.01? I dont find them...
o2orbit said:
How you u can do a hard reset on Touch 3.01? I dont find them...
Click to expand...
Click to collapse
A hard reset is as the name suggests, it's a function of the hardware, it's not software dependent, with the two softkeys held down, press the reset button, you'll then be presented with a confirmation.
Yes i do this, but then write, that you must press send button to hard reset it, but ayn button i press it, is my orbit not hardreseted??? Which button is mean for send button?
I switched from B&B 4.3 to Touch 3.1 Lite without cube and I find the Touch rom is faster and more stable. The memory leak seems to be less of a problem than with B&B but they are both fine roms.
o2orbit said:
(...)
Which button is mean for send button?
Click to expand...
Click to collapse
'Send Button' = the green phone button (for answer / initiate calls)
I've tried the Touch 3 and BB 4.3. Toms ROM looked great and was pretty fast but I didn't load up all my applications on it. I didn't really like the P-Bar prog as much as the simple X-Button. Also, his ROM was kinda light. A lot of people like that but I like not having to add a bunch of programs to get it the way I want it.
The Touch ROM was my favorite. W/cube there was a little mem drain but not much at all. It had most of the applications I was used to and was pretty fast. I would have kept the ROM but I was experiencing some problems with it that no one else seemed to have. So I switched to the Premium Plus ROM and it seems to be the perfect ROM for me. Pretty stable and functional if you soft reset once a week.
I don't care as much about the look as I do about functionality and stabilty. To me, Tom's ROM just didn't do that much. The way I figure, the more applications you have cooked into the ROM already, the less stuff you have to add, hence, slowing down the device and or unknown software conflicts. So I say pick the ROM that requires the least customization.
Is it just me, or has anyone else noticed that battery life on the TP2 is $hite after upgrading from WM6.1 to 6.5?
Using 6.1, I used to have Phone, Bluetooth and WiFi on all day at work, and get home and still have 60% batttery left.
Now, I have to turn off Bluetooth when it's not in use, and WiFi, and will be lucky to get home with more than 30% left.
Battery or unit hasn't been damaged or anything, and the only change was flashing the new WWE ROM through it.
I noticed an decrease in battery life too. That, the high memory usage, and the general feeling that the 6.5 ROM isn't as stable as the 6.1 ROM has made me flash back to WM6.1.
yup, same here.
Battery is dropping much faster, as well as higher mem usage.
Also the information tab of the power icon constantly says not applicable even though I have fully charged the unit numerous time already.
Yes, bettery life on my handset has been reduced. I've disabled all the push internet and removed a couple of the touch flo tabs to see if this will help. I think the new weather panel could be contributing.
i had the same not applicable issue, but yesterday i used the phone until battery was less than 10% and then charged it fully. now it's ok
Flashing back to 6.1?
Can you actually flash back to version 6.1? I thought that the upgrader wouldn't let you go back a version?
I do have the original HTC 6.1 ROM file and would do it, but I don't want to completely brick the unit.
The batttery info tab does the same on mine... so that's no good.
I've turned off all the push functions and the program quick-start cache and, at first, my memory availaibilty nearly doubled. However, it won't get back to those levels, even after a soft reset. I've tried Pocket Mechanic to clean out redundant RAM, dead process threads the lot... no joy.
There's other bugs too... when you rearrange the folders using Resco Explorer to drop them into logical Start Menu group folders, some still appear in the wrong group, even though they don't show in the directory listing... and that's WITH 'show hidden files' option to 'on'. e.g. HTC People icon, and Microsoft Mobile Online which stays on the main menu wherever you move it... it seems to make a copy of itself.
It's an odd little app anyway, as my online MS Live account doesn't show any activity to do with my mobile... so where my txt message backup has actually gone is anyone's guess?
I think overall, with HTC withdrawing the ROM from their own website, it's fair to say it's nowhere ready and far too buggy... and they are obviously not happy with it going out to public release.
If I can flash it back safely, then I'll do it.
6.1 ROMS
ridolfo said:
I noticed an decrease in battery life too. That, the high memory usage, and the general feeling that the 6.5 ROM isn't as stable as the 6.1 ROM has made me flash back to WM6.1.
Click to expand...
Click to collapse
Thought I had the 6.1. ROM, but it's not the full version... just an incremental.
Is there anyone on here that knows a secret location for the original HTC European WWE HTC 6.1 ROM? Signature panel shows what I had before.
I've tried a search and can only find cooked ones.
Thanks.
TyTanIc said:
Is there anyone on here that knows a secret location for the original HTC European WWE HTC 6.1 ROM? Signature panel shows what I had before.
Click to expand...
Click to collapse
Is this the sort of thing you are looking for? It's version 1.19.401.1, but version .0 is also at the repository link below if you need it. I presume this is the full ROM.....
The roms can be found located at the XDA ROMS repository.
I hope it is okay to link from here?
I don't know about downgrading, sorry - i'm sure someone with more experience can help though.
Cheers
I think you can only downgrade if you have hardspl on your phone.
Reaper said:
I think you can only downgrade if you have hardspl on your phone.
Click to expand...
Click to collapse
Nope, I upgraded from the stock WM6.1 to WM6.5, and then "downgraded" to WM6.1 again using the RUU from HTC; no HardSPL involved there.