Related
I bought a spv m2000 on ebay. But I got a cracked LCD screen this afternoon when i was playing basketball. The phone is still working but the screen was totally broken. Does anyone know where can I have it repaired? Thanks a lot!
does the screen have just a crack or does the screen have a crack and what looks like ink???
cos if it aint bleeding inky stuff, its just your sensor screen, which is cheaper than if it was your whole tft screen.
clikcy here ........... http://www.pdasmart.com/pdaphonexda2s.htm
and you find the screen you want 8)
joey jojo said:
does the screen have just a crack or does the screen have a crack and what looks like ink???
cos if it aint bleeding inky stuff, its just your sensor screen, which is cheaper than if it was your whole tft screen.
clikcy here ........... http://www.pdasmart.com/pdaphonexda2s.htm
and you find the screen you want 8)
Click to expand...
Click to collapse
Thanks a lot! I think I only need a touchscreen replacement! Is that website from Uk or US? Cheers!
its from the US, as the price is in US dollars, the price of the replacement touch screen says $105, which i think is about £65 uk.
Hi there
I have an SX66 with a cracked digitizer/touchscreen.
The LCD is ok. I removed and replaced the battery, unit starts ok, but, of course, I cannot get by the alignment screen (makes sense).
I have a couple of questions.
First, I have an opportunity to buy another SX66 that has a cracked LCD, but there doesn't "seem" to be a crack in the touchscreen. There is a "spider's-web". Can this be on the LCD? Or I'm thinking that maybe it's on the underside of the touchscreen. Any opinions?
Is it possible to have a cracked/broken lcd and not have an affected touchscreen?
So, the touchscreen 'looks' to be ok, but is there anyway of testing this without removing it? Any opinions? Should I buy his unit and try it?
Second, there are some instructions for replacing touchscreens in an earlier thread. However, there was one comment that said that if I buy the proper touchscreen, soldering/desoldering is not required. Can anyone clarify or confirm that?
Third, is there anyway of determining which touchscreen I require by just the unit serial number? Or do I need to remove it?
I want to take this apart and fix it, but I would rather gather all the info first. Any help would be hugely appreciated!!
Thanks!
Richard
Hi Richard,
Well first off all, let me put your situation into other terms...
You have a really expensive suit jacket with a cashmere liner inside. You snag it on a nail, and now there's a big rip on it. You have the opportunity to buy another really expensive suit jacket with a good exterior, but the cashmere is ripped to shreds inside. Do you buy it and try to sew the two together?
I don't know exactly how crafty you are, but retrofitting a touch screen onto an LCD sounds like a daunting task. Buy a new OEM screen outright and fit it into your SX66. You'll have a lot less to worry about in the long run.
This might help
http://wiki.xda-developers.com/index.php?pagename=BlueangelLCD
2 borken does not make a right (not sure if who said that ;-) )
the price is right?
the cost eaven on ebay dose not justify not getting a new one so here it is im in cambridge and i need a new housing for mine so we can get one i can chang out the screen for you and split the cost is you like this idea email me thanks
Tri. City Ont.
Richard, can you help me
I need buy some partc of my SX66, can you tell me where I can buy.
Thanks a lot
Hector Ruiz
hrvc said:
I need buy some partc of my SX66, can you tell me where I can buy.
Thanks a lot
Hector Ruiz
Click to expand...
Click to collapse
try here
http://www.apexlaptops.co.uk/Blue Angel.htm
I'm from Europe and I bought touchscreen in USA at http://www.pdasmart.com/.
They have also repairing service.
Regards
Same problem
my PDA2K digitizer broken and i'm facing the same problem after upgrading my PPC to WM 2005 but as by my knoweledge their is a systematic way of pressing the buttons to get over the screen alignements? any help
hello all, i just want to know what other model touch screen can be use to replace dopod 818 pro touch screen. As what i can see, o2 mini looks quite same, so can it be use? or is there any other model that u all can suggest to use? hopely for a reply from all members... thanks in advance
Yes the lcd is the same as the o2 mini.
Hello,
I can offer spare parts for Prophet repairs.
The Prophet is sold under many different brand names, and the screens from each brand are often interchangeable. The same screen is also used in a number of other phones.
The Prophet (and the same model sold under different brand names) has been made with two different LCD screens. You must be sure that you are buying the correct screen for your particular model.
To find which screen you need, you must take your phone apart and look at the flexible plastic strip that connects the LCD to the motherboard. It will be either a GOLD color or BLACK. You can only replace the LCD screen with a screen that has the same color connection.
If you let me know what color your connection is, I can give you a quote on a replacement screen.
More information about touch screen:
There are two parts to the "screen" that you seeon your device. There is the LCD screen, and there is a touch screen. Pictures are attached below.
If your touch screen is cracked but the LCD is still working fine, then you only need to replace the touch screen, and it is much cheaper. The LCD screen is obviously more expensive.
Hope this helps.
njbridges said:
More information about touch screen:
There are two parts to the "screen" that you seeon your device. There is the LCD screen, and there is a touch screen. Pictures are attached below.
If your touch screen is cracked but the LCD is still working fine, then you only need to replace the touch screen, and it is much cheaper. The LCD screen is obviously more expensive.
Hope this helps.
Click to expand...
Click to collapse
thanks alot. already got replacement. my friend send it to his friend and replace it. Since u have spare parts for dopod, can u give me a quotation for speaker (at the back one) and housing ( black and pink ) including delivery cost to malaysia.
benjat said:
thanks alot. already got replacement. my friend send it to his friend and replace it. Since u have spare parts for dopod, can u give me a quotation for speaker (at the back one) and housing ( black and pink ) including delivery cost to malaysia.
Click to expand...
Click to collapse
The speaker is $10.
The full housing is $30 per set (front, back, battery, mid section, side buttons, windows sticker).
The faceplates (front, back, battery) are $15 per set.
The front button panels are $5 per set (black or silver available).
Delivery to Malaysia will be $8.
All prices are in US dollars.
PM me if you would like to place an order.
how much cost the lcd? im interessed!
or some1 can provide a site where i found parts of prophet please?
P4k1t0 said:
how much cost the lcd? im interessed!
or some1 can provide a site where i found parts of prophet please?
Click to expand...
Click to collapse
Hi there,
I have replacement parts for prophets (actually, for almost every pda or cell phone).
The replacement LCD screen for prophets is US $80.
The replacement TOUCH SCREEN for prophets is US $5.
See my post above .... if your LCD screen works, but the touch screen is cracked, it's quite cheap. If your LCD needs to be replaced, it's quite expensive.
If you would like to place an order, please send me a private message (PM) with your email address.
My website is coming soon ... I'll post here when it's ready.
njbridges
Dopod 818 pro digitizer (Touch Screen)
njbridges said:
Hi there,
I have replacement parts for prophets (actually, for almost every pda or cell phone).
The replacement LCD screen for prophets is US $80.
The replacement TOUCH SCREEN for prophets is US $5.
See my post above .... if your LCD screen works, but the touch screen is cracked, it's quite cheap. If your LCD needs to be replaced, it's quite expensive.
If you would like to place an order, please send me a private message (PM) with your email address.
My website is coming soon ... I'll post here when it's ready.
njbridges
Click to expand...
Click to collapse
How much to deliver to manila philippines? just the digitizer..
Thanks!!! i need it asap!!!
Hi anyone, my little cousin broke my LCD screen. Anyone had a faulty uni and want to sell the lcd please respond to this thread or PM me. Im quite tight on the budget so I dont need a new LCD as new LCD will cost almost the same as 2nd hand Uni in the market. However if anyone could sell me for a cheap price then i dont mind. Thanks
Hi guys.Few days ago i accidentally drop my phone and the touch screen glass broke.Everything is working fine just it has this pattern on the screen.I did not managed to find a spare one so if someone knows where i can buy this online i`ll appreciate if you share some links.Thanks.
I think at this moment you should contact your dealer..
I have the same problem, cant find digitizer, dealer is not good solution but its all we can find for now, they will replace your display too no mather is workin good or not... So it will cost you more.
My dealer ask`s 75€ for the complete digitizer with the display.