LCD for sale anyone? - JASJAR, XDA Exec, MDA Pro Accessories

Hi anyone, my little cousin broke my LCD screen. Anyone had a faulty uni and want to sell the lcd please respond to this thread or PM me. Im quite tight on the budget so I dont need a new LCD as new LCD will cost almost the same as 2nd hand Uni in the market. However if anyone could sell me for a cheap price then i dont mind. Thanks

Related

Cracked screen, anyone got a dead BA?

Well i just dropped my phone at the car wash, cracked the glass on the lcd, so...i was wondering if anyone had a dead BA that they could sell me, all i am looking to get is the top sliding half. PDASMART has the lcd itself for 225, i didnt even pay that much for the phone lol. anyways, let me know if you or anyone you know has one to sell, thank you
Hello,
do you know what LCD is inside your BA? I have digitiser / glasstops for the Sony LCM, these can be made to work with the Toppoly LCM but it is a bit awkward as you have to cut the ribbon and 'spread' it out to connect to the main ribbon.
Richard
im sorry i havent taken it apart yet as i still need it as a phone for now until i get a temp phone. i'll look around to see if i can dig up any information on that though. thanks
no one?? fluffcat, you still got your lcd??

SX66 Touchscreen Cracked - need info please!

Hi there
I have an SX66 with a cracked digitizer/touchscreen.
The LCD is ok. I removed and replaced the battery, unit starts ok, but, of course, I cannot get by the alignment screen (makes sense).
I have a couple of questions.
First, I have an opportunity to buy another SX66 that has a cracked LCD, but there doesn't "seem" to be a crack in the touchscreen. There is a "spider's-web". Can this be on the LCD? Or I'm thinking that maybe it's on the underside of the touchscreen. Any opinions?
Is it possible to have a cracked/broken lcd and not have an affected touchscreen?
So, the touchscreen 'looks' to be ok, but is there anyway of testing this without removing it? Any opinions? Should I buy his unit and try it?
Second, there are some instructions for replacing touchscreens in an earlier thread. However, there was one comment that said that if I buy the proper touchscreen, soldering/desoldering is not required. Can anyone clarify or confirm that?
Third, is there anyway of determining which touchscreen I require by just the unit serial number? Or do I need to remove it?
I want to take this apart and fix it, but I would rather gather all the info first. Any help would be hugely appreciated!!
Thanks!
Richard
Hi Richard,
Well first off all, let me put your situation into other terms...
You have a really expensive suit jacket with a cashmere liner inside. You snag it on a nail, and now there's a big rip on it. You have the opportunity to buy another really expensive suit jacket with a good exterior, but the cashmere is ripped to shreds inside. Do you buy it and try to sew the two together?
I don't know exactly how crafty you are, but retrofitting a touch screen onto an LCD sounds like a daunting task. Buy a new OEM screen outright and fit it into your SX66. You'll have a lot less to worry about in the long run.
This might help
http://wiki.xda-developers.com/index.php?pagename=BlueangelLCD
2 borken does not make a right (not sure if who said that ;-) )
the price is right?
the cost eaven on ebay dose not justify not getting a new one so here it is im in cambridge and i need a new housing for mine so we can get one i can chang out the screen for you and split the cost is you like this idea email me thanks
Tri. City Ont.
Richard, can you help me
I need buy some partc of my SX66, can you tell me where I can buy.
Thanks a lot
Hector Ruiz
hrvc said:
I need buy some partc of my SX66, can you tell me where I can buy.
Thanks a lot
Hector Ruiz
Click to expand...
Click to collapse
try here
http://www.apexlaptops.co.uk/Blue Angel.htm
I'm from Europe and I bought touchscreen in USA at http://www.pdasmart.com/.
They have also repairing service.
Regards
Same problem
my PDA2K digitizer broken and i'm facing the same problem after upgrading my PPC to WM 2005 but as by my knoweledge their is a systematic way of pressing the buttons to get over the screen alignements? any help

Broken Screen on my o2 xda 2s

hi guys !
my problem is written in Title kiddin
before 2 days my brother broke screen on my baby and i have some questions! screen got little crack, color, sharpnesss etc. is normal but its not touch screen anymore! :/
so what should i buy: that plastic which he broke (costs 20$) or whole touch screen (costs about 100$) ?
more reasonably is to buy that plastic, but some guy told me that i need to buy whole screen (he wanna sell it to me for about 120e) but i dont belive him!
what are our opinions ??
bye
I buy you the PCB cable of the LCD!!
Mine is cutted and I have a good LCD and bad PCB cable!!
Does anyone knows how to remove it? and to glue it back?

N7000 Replenishment Screen

Hello guys,
10 minutes ago my galaxy note N7000 screen cracked in my pocket.
So I need to buy a replenishment screen from Samsung but I simply can't find stores that supplies replenishment parts for it. Do anyone knows where to buy a new Amoled LCD screen for galaxy note ?
Thank you and best regards,
Amid
ebay, took 5 days to ship from HK to NYC. Follow youtube guide in opening the note and use blow dryer/heat gun to loosen the sceen, wedge open with something sharp and slowly tear back the screen gently. You will need the old Wacom sensor from the broken screen so becareful to not to rip it. There is guide in the general section. I broke mine 2 weeks ago and replaced it in a hour. take your time you can get it done.
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
amidsal said:
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
Click to expand...
Click to collapse
I think this is what you are looking for:
http://www.ebay.com/itm/S-Black-Dig...087?pt=LH_DefaultDomain_0&hash=item2c65951cd7
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
amidsal said:
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
Click to expand...
Click to collapse
Hmmm no, in that case you will need the 200ish one.
You will need the entire setup, glass, LCD, and Touch. Does not come with Wacom sensor. Looking around you can get them for 230-260. Look for delivery, that makes a huge difference, especially with your phone out of commission.
This is the guy I purchased mine from, but I panic and purchase the first one I saw. If you do some research you will find cheaper, but I got min in 5 days. So I am glad this guy came thru. Good luck, its going to stress you out a bit when you have to remove the screen from the front panel, they are glued on so take your time. Looks like your LCD broke so it is going to crack and shatter further so make sure you do it in area where it is easy to clean. If you look at the front panel after you remove it, you will see one wire that does not come with the replacement one, that is for the wacom sensor, so be careful and don't damage that part, you will need to peel it off and place it back on to the replacement lcd, otherwise your s-pen won't work. It's been 2 weeks, my phone is going strong and no sensor or sceen issues. You should get a more protective case, since you probably already blew close to ~$1000 on this phone by now. I have a casemate, otterbox commuter looks like a good one. Once again good luck, you can do this.
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Well mine looks brand new, must be the workmanship ;-P But why flame my advise when he is going to need to do it anyways, the screen is completely useless, as was mine. Why don't you keep your assumption to yourself in how it will look or if he is going to ruin the device. If he decides that he would rather live with a crack screen or someone who is willing to do it, there really isn't much options here. What's up with such negative attitude here. Just trying to show him that it can be done.
---------- Post added at 04:30 PM ---------- Previous post was at 04:26 PM ----------
jusutus said:
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Click to expand...
Click to collapse
Look at the delivery time. I got mine in 5 days. just talked to the seller.
Replacement screen with 2 connectors
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Leo.F said:
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Click to expand...
Click to collapse
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
s.magus said:
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
Click to expand...
Click to collapse
Thank you s.magus! I would love to go that route, but I'm in Venezuela, and Samsung is selling the GN, but does not yet have replacement parts. You're right, that will be the best way.
n7000 replenishment screen
hello jignesh here .... i hav note gt n7000 ... it working 100% normally ... just cracked screen or glass or lcd ... i dont know what is problem .... can u tell me what is the problem .... glass cracked or screen cracked or lcd cracked ???? how can i find problem ???? touch and everything is working perfectly as like new note .... i already using note since 1month ... but now i want to repair it ... so what can i do ??? just change the front glass or change lcd ??? please reply me ....
Where is the cheapest part in uk?
is there anyone in India who could tell the price of galaxy note's white screen touch (not the lcd screen).Thanks in advance....:good:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
SUPER NICE !!!!
After a search for 5 days ... This one is the best !!!
THNX baz77
your welcome, hope you fix yer stuff and be carefull electronics is delicate stuff
Sent from my GT-N7000 using Tapatalk 2
i disagree
Hi ,
I think Senior member Justis is right... many of us dont want to do a full screen replacement for 220$...when we can just remove the front screen for 20$..many have done this method successfully... U just need to watch a lot of youtube videos on this and be careful/delicate with the procedure... its possible.
So i dont think what he said was a waste.. Pls keep such remarks to yourself.. He was not wasting anyones time.
Infact you are wasting my time making me read your message and give u a reply.
You know what...im doing a screen replacement too... thats what guys do first. njot jump in and do a full replacement for 220 $.:good::good::good:
jusutus said:
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
Click to expand...
Click to collapse

Replacement glass / digitizer?

Hi guys, not sure if this is the right place for it but I can't for the life of me find anywhere selling the glass screen and digitizer for the 2014 note yet... anyone located one? Reason I ask is my mate has sat on his and it's well and truly cracked but luckily the LCD behind it is fine.
Any help is appreciated!
Cheers,
Scott
http://arabic.alibaba.com/product-g...-lcd-touch-screen-replacement-1517317298.html
Thats the only thing I can find but since I'm on my phone it doesnt seem to want to translate so can't tell if its deffo a digitizer for our tablets or even if the do delivery worldwide.

Categories

Resources