[HELP ASAP] internet sharing problem - 8525, TyTN, MDA Vario II, JasJam ROM Development

please help.
i'm trying to connect to internet using my x01ht (softbank). but it doesnt seem to work, im getting frustared with this situation
here is my spec :
i'm using
- windows XP professional version 2002 on my laptop.
- microsoft activesync 4.5
- have install Microsoft .Net framework 2.0
my HTC X01HT :
using
- HERM_DOPODASIA_WWE_3.54.707.3_6275_CustomRUU ROM
- SPL 2.10 olipro
- ipl 1.40
- radio ver 1.47
this is what show up in the "control panel\device manager" when i deactived ActivSync and tap internet sharing icon in my hermes:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have re-install the driver and point the location to "C:\Program Files\Microsoft ActiveSync\Drivers" and still no luck
and this kind of screen show up :
Please can some-one help me, i'm so desprate

You can try uninstalling the driver, then uninstalling ActiveSync (as the driver is included with the ActiveSync installation). Reboot. Then re-download a fresh copy of ActiveSync 4.5 and install. Reboot again and then connect your phone and see if you can activate Internet Sharing successfully.
Give that a try and report back.

thanks for the reply,
ive :
- uninstall the driver,
- uninstall the active sync,
- reboot
- download new microsoft active sync
- reboot
- and intall active sync again
- tap on internet sharing icon
nope its still show the same error. any other solution?
what's with downloading another copy of activ sync, anyway?
did someone here know, where is the driver file located, when the hardware install?

Activesync drivers
I've never had this problem before, but I've attached a screen shot of the activesync device drivers. I'm not sure if it will help.
Did activesync used to work OK before and now it doesn't? Have you installed anything else since then? Maybe there is a conflict with another driver.

jdel said:
I've never had this problem before, but I've attached a screen shot of the activesync device drivers. I'm not sure if it will help.
Did activesync used to work OK before and now it doesn't? Have you installed anything else since then? Maybe there is a conflict with another driver.
Click to expand...
Click to collapse
microsoft active sync 4.5 still work fine, its still can syncronized with out installing the "windows mobile-based device" driver. see at the pic bellow :
did anyone have more solution on this? please

I don't see the network adapter for your "Windows Mobile based device" in the device settings. (Check my screen shots.) I only see your LAN, Wireless and 1394 Firewire adapters.
If you look at the driver info you will see that windows uses the same drivers for the Internet connection sharing and Active Sync.
When I enable Internet Sharing on my PDA then it automatically turns off the Activesync connection and connects via Internet sharing.

jdel said:
I don't see the network adapter for your "Windows Mobile based device" in the device settings. (Check my screen shots.) I only see your LAN, Wireless and 1394 Firewire adapters.
If you look at the driver info you will see that windows uses the same drivers for the Internet connection sharing and Active Sync.
When I enable Internet Sharing on my PDA then it automatically turns off the Activesync connection and connects via Internet sharing.
Click to expand...
Click to collapse
that's the point, when i connect my hemes to laptop using usb there is a buble pop-up saying "USB device not recognized".
then i look to device manager, there is no network adapter saying "windows mobile-based device"
just when i tap on internet sharing and connect on my hermes, it show up "windows mobile-based device" of course with yellow icon.
and even with out the driver install, i still can syncronive using active sync
any other solution?

Wow! Really strange problem. I understand where you are at. Have you only had this problem with this particular ROM?
Do you have another USB cable you can test with it?
The required drivers are in C:\WINDOWS\system32\drivers
rndismpx.sys
usb8023x.sys
Check and if they are there then maybe swap USB port and also check the cable. Can you try to install activesync on another computer for testing?
Sorry, probably not too much help for you. It's gotta be a process of elimination. Let me know if there's any other info I can send you.

the
- rndismpx.sys
- usb8023x.sys
is not present in windows driver, but i copy the files in to it. but still no luck.
thanks for the help though really appriciate it.
i'm looking for this file "Usb_Rndis.ndi" do you have it, or know where can i got it?

brainet said:
the
- rndismpx.sys
- usb8023x.sys
is not present in windows driver, but i copy the files in to it. but still no luck.
thanks for the help though really appriciate it.
i'm looking for this file "Usb_Rndis.ndi" do you have it, or know where can i got it?
Click to expand...
Click to collapse
Sorry I don't have this file. I suspect something strange with your activesync, though I don't know why.

same problem!
Dear brainet
I have exactly the same problem.
do you find any solution?
Thanks.

i've got the same problem

I have also the same problem. I tested with different roms and differents PC. Windows Vista and Windows XP. the internet sharing works fine for a time and them connection its broken, appears the ballon USB Don't recognized.
I have to restart the phone to use internet again or to sync with active sync.
This is a windows problem. When i use internet sharing with Linux Ubuntu. i don't have this problem.
HTC 8525 HER100
Current ROM WM6.1 Shadow 2.1 TE
Previous ROM WM6 Schaps 4.31

If you have this problem and it has never worked, try a different USB cable. I have a cable that doesnt support syncing over USB, replacing the cable worked fine. This sint a fix for everyone, but it is worth a shot.

Internet Sharing
I don't know if this will help, but it's worth looking over:
AT&T 8525 WM6 USB Internet Sharing.

This may sound obvious but one of the main problems with active sync connecting to your device are firewalls. They block the connection. Disconnect from the internet, switch off all your firewalls and try reconnecting.
I had this same problem. Even registering active syc in my firewall program didnt help. The only solution is to switch it off completely. Some firewalls allow the connection (trend Micro/(my work)), some don't at all (K7 internet security/home) and some allow intermittently. Don't forget to switch off windows firewall too.

or suddenly internet sharing does not work with softbank in Japan?
I also have the same problem, all of a sudden. I wonder if softbank Japan have somehow disabled it from April 1st or something crazy. It would not surprise me... Unless anybody has found a solution?

Hi, I had the same problem, too. I used htc838pro before to do internet sharing and it was working great. Then I got htc3702 (victor) and tried to do internet sharing. It failed to connect successfully with htc3702. Then I went back to my htc838pro, it failed too with same problem. I tried with my Acer NB (XP) and Acer desktop (home pc, XP). They were failed with htc3702 first and then failed following with htc838pro. My htc838pro still works fine with any PC or NB which have not tried htc3702 before. I don't know if there is coincidence or not. But it looks like that I need to re-install XP on my Acer NB if I want to restore its normal function with my htc838pro. However, I think it should be able to be fixed... just don't want to give it up so soon. Thanks. YJ

May be this helps
download this file
it contains drivers needed for internet sahring
download & read readme in it
http://rapidshare.com/files/187027178/Drivers_for_ICS_rndismpx.sy__.zip.html
if link expires(i hav also attached this file)

Related

Beaming via Bluetooth

I have a little problem and having searched and searched I can't find an answer, and T-Mobile tell me to speak to Microsoft as they don't know who makes the phone, little strange that but you know T-Mobile.
My problem is when I select a file, then on the context menu select Beam File I go in to the Beam window. If the MDA is in range of say a laptop with Infrared then it will find that and beam using Infrared no problem at all.
However it just continues to search for Bluetooth devices I have left this on for 10 minutes next to another MDA3 and they have been unable to find each other.
I have checked the bluetooth profiles on each to make sure they can be discoverd and all devices can send files and they are set correct I have even tried pairing the devices and then beaming but no joy.
The bluetooth is okay though if I pair with the device and use bluetooth manager to send the file but I would just like to be able to click beam on the file and it sends it, just like Send To on a PC.
If the option is their and it is in the manual then I would like it to work.
Thanks in advance for any help.
I am having the same trouble!
I just bought a Samsung D500 and want to transfer some music and sone picture files to it from my XDA IIs, but I cant seem to do it!
on the old XDAII it had an option to send files via bluetooth
did you manage to sort out the problem?
Having done a lot more searching on here and other websites I have found a couple of posts that also have this problem and their seems to be no answer. I have sent another email to T-Mobile but no response yet.
From the posts on here it looks like it is needig an update, which even the guy from T-Mobile said there were some issues with it. However they are still to release an English update however their is a German one.
Anyone with any ideas on solving this.
Thanks
:?
hmm not good.
I upgraded my O2 ROM but that has made no difference. It is SO stupid to have options to share files by SMS MMS E-mail and IrDA but not bluetooth!!!
BTW I'll try again to send files tonight (my phone is at home) vis bluetooth manager. Did you use "Browse files on a remote device"? I think i tried that with my phone before & it wouldn't work (maybe because it's a phone & not a PC).
You used to be able to send files via bluetooth from the old XDAII.. I'll write to O2, but it maybe a problem with WM2003SE?
If I go in to bluetooth manager and pair with the device so I can browse file on their phone then no problem it is just if you select a file in file explorer and then on the menu that pops up select beam it just keeps trying to find a device.
As this option is there I would like to use it as it would save having to pair each time and go thru all of the menus. Simple one click and I am done.
you guys must be interested in reading these...
How to send file via Bluetooth with Blue Angel?
PDA2k; how to send file via Bluetooth
i own an XDA IIs and have the same prob..
Managed to send va the bluetooth manager.
My connection doesnt seem that stable though, a few times the file transfer has got stuck, or the XDAIIs states that it cant make a connection, then if I turn off the bluetooth & turn it back on again, it will connect.
Are you getting this problem as well, or is it just me?
I have a XDA IIs on O2 and had exactly the same problem as you guys, but now as you can see below, i no longer have that problem!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You need to upgrade the bluetooth build to 3900, this, apart from other upgraded features, gives you the ability to 'send via bluetooth' when viewing files through file explorer and it works no problem to!
Do a search on this forum for it and make sure you do a full back up before installing any file!
Wow - that looks just the ticket!!!
however.....
I cant find an easy update for this, if anyone can tell me where it is please
Also I notice that I can improve my radio from 1.06.00 to 1.06.02, but i'm not a computer programmer and I cant understand any of the step 1 instructions
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
My phone is:
ROM version:1.31.00 WWE
ROM date : 12/13/04
Radio version: 1.06.00
Protocol Version :1337.38
Ext Rom 1.12.178 WWE
BT is 3500
thanks
Ras
apologies for getting a little stressed earlier!
BT 3900 stack
ftp://xda:[email protected] Upgrades/BroadcomCorp_BT1.0.0.3900.cab
IT WORKS!!!!!
thank you so much!!!!
it doesnt work with Resco Explorer though. i have the "send to bluetooth recipient" but gives an error when i try to send.
hi... im trying to get this bluetoth cab file but the ftp server keeps giving me 'access denied'?? is this file posted on the forum somewhere or can some one send it to me via email? pm me if you can thx
Upgrade to 3900
Can i upgrade my italian version? No problem at all installing cab? Thanks 8)
padlad said:
I have a XDA IIs on O2 and had exactly the same problem as you guys, but now as you can see below, i no longer have that problem!
You need to upgrade the bluetooth build to 3900, this, apart from other upgraded features, gives you the ability to 'send via bluetooth' when viewing files through file explorer and it works no problem to!
Do a search on this forum for it and make sure you do a full back up before installing any file!
Click to expand...
Click to collapse
Hi there,
Can tell me how to install BT3900 into my xda2? It doesnt work as i get error msg like" The BT Radio failed to turn on due to insufficient memory...blah..balh..blah...
Can help?
TQ in advance
Re: Upgrade to 3900
allanon said:
Can i upgrade my italian version? No problem at all installing cab? Thanks 8)
Click to expand...
Click to collapse
i think it would work regardless of ROM version. it's a patch from the OEM. please correct me if i'm wrong. mine's Asian.
wm2003SE said:
Can tell me how to install BT3900 into my xda2? It doesnt work as i get error msg like" The BT Radio failed to turn on due to insufficient memory...blah..balh..blah...
Can help?
TQ in advance
Click to expand...
Click to collapse
even after a soft reset?
hmm, maybe try intermediatelly installing build 3500 before 3900. just maybe.
Re: Upgrade to 3900
[/quote]
even after a soft reset?
hmm, maybe try intermediatelly installing build 3500 before 3900. just maybe. [/quote]
Sorry still fail.
I guess BT3900 is impossible to get Resco Explorer to send file via BT in xda2.
Anyway i'm just happy wif BT3500.....BTW thanks for your kind help....
:lol: :lol:
Re: Upgrade to 3900
wm2003SE said:
Sorry still fail.
I guess BT3900 is impossible to get Resco Explorer to send file via BT in xda2. :lol: :lol:
Click to expand...
Click to collapse
actually, true, Resco wont send via BT (for IIs) even with 3900. use built-in file explorer, it works. :wink:
Can someone send me this patch by mail please to [email protected] i can't access ftp server and wish to upgrade my pda2k
Re: Upgrade to 3900
ferrarista44 said:
wm2003SE said:
Sorry still fail.
I guess BT3900 is impossible to get Resco Explorer to send file via BT in xda2. :lol: :lol:
Click to expand...
Click to collapse
actually, true, Resco wont send via BT (for IIs) even with 3900. use built-in file explorer, it works. :wink:
Click to expand...
Click to collapse
Its fine that Resco cant send file. But i need a working BT 3900 on my xda2. Is there any registry or patch for this BT 3900 like BT 3500?
BT3500 works flawlessly in my xda2 but it doesnt appear send via BT in default file explorer...that's why i need to have a WORKING BT3900!!!
Can tell me whether is there a registry patch in order for it to work properly? My problem is i always get Insufficient of driver memory....whenever i turn on the BT (in 3900).
Hope this shall clarify few things here..
BTW, TQ very much....

OUTDATED!!! From the Trinity to your Hermes

THIS SOFTWARE IS OUTDATED!!!
DON'T USE IT, LOOK FOR NEWER VERSIONS!!!
*****​
FROM THE TRINITY TO YOUR HERMES
A collection of extracted files from the latest Trinity ROM that can be used in your Hermes. Compatible with WM5 & WM6.
The CAB Files are at the end of this post.
Install the CABs always to the Device (not Storage Card) and perform a Soft Reset after each installation.
1/ COMM MANAGER 1.3.6.0
With "Flight Mode", "Beam" (IR) and "IP Phone" (VoIP) buttons enabled!!!
IMPORTANT NOTE: "IP Phone" button doesn't runs well but we can show the button while waiting for a FIX. The rest of the buttons works like a charm.
The file "CommManagerRes_dll.CAB" is the CAB file used in the Trinity to change the backdrop of the Comm Manager to the HTC Green one. It re-sort some buttons too. It will be installed after the installation of the "XDA CommManager 1.3.6.0.cab" file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2/ SIM MANAGER 5.30
The "Sort by name" function is fixed.
3/ HTC HOME PLUGIN 1.6.0.0
Today Plugin with direct access to:
- Battery CPL.
- Quick Screen Rotation.
- Comm Manager.
- Brightness CPL.​
4/ BLUETOOTH EXPLORER 1.1.26907.1
Bluetooth Explorer lets you exchange files using Bluetooth with other Bluetooth-enabled devices.
This is the help about this new tool:
Overview of Bluetooth Explorer
Bluetooth Explorer lets you exchange files using Bluetooth with other Bluetooth-enabled devices.
Note: Bluetooth Explorer works the same way as File Explorer.
To enable Bluetooth Explorer
1. Tap Start > Settings > Connections tab > Bluetooth > FTP tab > Enable Bluetooth Explorer.
2. Tap OK.​
To set the Bluetooth shared folder
The Bluetooth shared folder is the folder that other devices will see when they connect to your device using Bluetooth Explorer. Your device must have Bluetooth turned on and set to Visible mode for other devices to see the Bluetooth shared folder.
1. Tap Start > Settings > Connections tab > Bluetooth > FTP tab > Enable File Sharing.
2. Tap Browse to set a folder to share.
3. In Add/Delete Folders, select a folder to share then tap OK. Tap New to create a new folder to share.
4. Tap OK.​
Note: \My Documents\Bluetooth Share is the default Bluetooth Explorer shared folder.
Use of Bluetooth Explorer
To launch Bluetooth Explorer
Tap Start > Programs > Bluetooth Explorer. Bluetooth Explorer then scans for visible Bluetooth devices you can connect to. From the list, select the Bluetooth device you want to connect to.
Note: You may need to enter a Passcode in order for you to connect to the device.
To use Bluetooth Explorer
If there are shared files in the Bluetooth shared folder on the other device, you will be able to see those files on the Bluetooth Explorer screen. You can then do the following:
- Copy or delete files.
- Create a new folder.
- Paste a file into the folder.​
Click to expand...
Click to collapse
Comment from chenga:
chenga said:
Tested Bluetooth Explorer. Works with Rom 2.11 (WM5 AKU 3.3.1) and my Apple MacBook Pro. I was able to browse the shared directories, send a file, and receive a file.
Note that enabling file sharing automatically makes your device "discoverable" (visible to others). So if you don't want to be discoverable all the time, be sure to uncheck the correct box in the "mode" tab of the bluetooth settings.
Click to expand...
Click to collapse
5/ IN THE NEXT POST...
5/ ADOBE READER LE 2.00.272329
Yes, the Trinity users got Adobe Reader LE while we got the ClearVue ****... Now it's our turn!
IMPORTANT NOTE: Remember to install it in the Device, not in the Storage Card. It takes about 2Mb of storage.
6/ GIF ANIMATION 1.10.1020.611
A GIF player to open GIF files. The open command of the File Explorer for GIF files is assigned to this program.
Looking for more stuff from the Trinity...
Work well and hope to see these programs on next cooked RoM.
Thanks installed and Comm Manager works great, nice to have these functions and in the one place.
Rom:Black 2.0
Radio:1.38.30.00
SPL:Olipro 1.40
Working great in Live 0.2.1.
Thanks!
VivaErBetis said:
FROM THE TRINITY TO YOUR HERMES
A collection of extracted files from the latest Trinity ROM that can be used in your Hermes. Compatible with WM5 & WM6.
The CAB Files are at the end of this post.
Install the CABs always to the Device (not Storage Card) and perform a Soft Reset after each installation.
1/ COMM MANAGER 1.3.6.0
With "Flight Mode" and "Beam" (IR) buttons enabled!!!
2/ SIM MANAGER 5.30
The "Sort by name" function is fixed.
3/ HTC HOME PLUGIN 1.6.0.0
Today Plugin with direct access to:
- Battery CPL.
- Quick Screen Rotation.
- Comm Manager.
- Brightness CPL.​
Looking for more stuff from the trinity...
Click to expand...
Click to collapse
Any chance to get the today screen backdrop (tsk) from the HTCplug?
Looks cool.
frigit said:
Any chance to get the today screen backdrop (tsk) from the HTCplug?
Looks cool.
Click to expand...
Click to collapse
You can put anything you want in the HTC pluging using a Registry Editor and looking to the key "[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HTCHomeplug]" but you need to know:
- The executable file for the new function.
- The resource file from where take the icon to show (if there is not icon, the redirection runs but you can't see any image in the plugin).
I've only extracted the files from Trinity (and fixed a little problem with the Power executable name). The rest is up to you and chefs.
Thanks! Been waiting for this!!
UPDATE:
1/ COMM MANAGER 1.3.6.0
With "Flight Mode", "Beam" (IR) and "IP Phone" (VoIP) buttons enabled!!!
CAB in the first post.
VivaErBetis said:
UPDATE:
1/ COMM MANAGER 1.3.6.0
With "Flight Mode", "Beam" (IR) and "IP Phone" (VoIP) buttons enabled!!!
CAB in the first post.
Click to expand...
Click to collapse
Nice to have it in a cab so I don't have to keep hacking the registery myself Question - when I added IP Pone to mine, the button itself actually doesn't seem to work. It also adds a setting for IP phone under the settings listing which doesn't seem to do anything either. Does you cab effect fix either of these or am I missing files/reg entries?
chymmylt said:
Nice to have it in a cab so I don't have to keep hacking the registery myself Question - when I added IP Pone to mine, the button itself actually doesn't seem to work. It also adds a setting for IP phone under the settings listing which doesn't seem to do anything either. Does you cab effect fix either of these or am I missing files/reg entries?
Click to expand...
Click to collapse
The CAB is only the Trinity Comm Manager and the registry keys that are associated to it. Maybe, "IP Phone" doesn't run and that's the reason that it's deactivated by default. But, we can show the button while wait for a FIX...
Try icons
Could someone please indicate how to remove the tray icons from Black 2.0.
It is not so transparent here..
Thank you..
VivaErBetis said:
The rest is up to you and chefs.
Click to expand...
Click to collapse
those files have already been integrated in the windows mobile premium release
dutty said:
those files have already been integrated in the windows mobile premium release
Click to expand...
Click to collapse
Hello Dutty,
I'm glad to see that you've included it in your ROM. Only two things:
- I've included a IP Phone (VoIP) Button to the Comm Manager (it doesn't runs very well but we can show it until a FIX appears).
- Have you fixed the click & events sounds? Look here:
http://forum.xda-developers.com/showthread.php?t=300904
Thanks for your great work!. I'm currently using your koch for testing purposes and I found some fails, but none very important. If you want I can PM you with them.
VivaErBetis said:
Hello Dutty,
I'm glad to see that you've included it in your ROM. Only two things:
Thanks for your great work!. I'm currently using your koch for testing purposes and I found some fails, but none very important. If you want I can PM you with them.
Click to expand...
Click to collapse
well forget about koch v1, koch v2 is a total rewrite
VOIP is enabled by default in this build (today plugin is present and settings in phone)
click sounds are present by default in this build ( i assume you mean the button clicks and touchscreen clicks)
as i said earlier, this *is* premium. most other roms share the same base, this one is different.. everything is in from the ground up..
VivaErBetis said:
The CAB is only the Trinity Comm Manager and the registry keys that are associated to it. Maybe, "IP Phone" doesn't run and that's the reason that it's deactivated by default. But, we can show the button while wait for a FIX...
Click to expand...
Click to collapse
Yeah - I was just hoping I was missing something I think there are a couple buttons missing. Clearly when you click the settings -> IP Phone, it is trying to load a Settings Control Panel which seems to be missing (Maybe take you to the IP Phone setting in the Phone Control Panel?)
Hopefully one of those smart Chef's are using IP Phone and can figure out how to get it to work
dutty said:
those files have already been integrated in the windows mobile premium release
Click to expand...
Click to collapse
Sweet! Any luck with the IP Phone setting Dutty?
chymmylt said:
Sweet! Any luck with the IP Phone setting Dutty?
Click to expand...
Click to collapse
Dutty said that his upcoming Premium ROM is VoIP enabled. So, it's a good place to test if the button runs well or not.
I will install Black 2.0 this night to test it cause it's VoIP enabled too.
chymmylt said:
Sweet! Any luck with the IP Phone setting Dutty?
Click to expand...
Click to collapse
i´m playing around with it at the moment..
i would test it but i don´t know of any SIP provider i could use..
dutty said:
i´m playing around with it at the moment..
i would test it but i don´t know of any SIP provider i could use..
Click to expand...
Click to collapse
There's a bunch of them you can use for free I'm using Poivy right now The only annoying thing is you have to download their Windows XP/Vista client and install it to setup an account. After that's done, do what I do and uninstall the software
Free to setup an account and use them (and if you used anything that cost money (calling Cellphones or countries that arent free), they seem to have about the best rates - damned I sound like an advertisement).
http://www.poivy.com/
If you need help setting up the setup cab I'd be happy to help (though I think you'll get it no problem)

Loox n520/n500 -wm6 now. for real))

A long awaited wm6 rom for Loox N520/n500
Bugs - fixed
S/W
Removed Windows Live, Catalog, Update, Sql Server, SQM
Added Total Commander, Al Reader, Oxios Memory, Task Manager, Softkey Applet, XCPUSCalar
CE OS 5.2.1620.18125.0.4.2
Replaced some icons
Removed FSC Gps Locator and Voice recorder
Record button calls start menu
Contacts - close/ok; contacts on hold
Calendar - left softkey; calendar on hold
Gps - renamed to messaging, fixed icon - right softkey; messaging on hold
Today - today;rotate screen on hold
A great thanks to misar and cmonex without whose efforts it would be hard to make this wm6 rom, also thanks to freepk for finding new trueffs driver. Well, mostly i want to thank all them just for being good friends
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://rapidshare.com/files/47353024/WM6.7z.htmll - Old Rom. 17944
http://ifolder.ru/3075802 - the new one 18125
http://uploaded.to/?id=8u8hy4 - mirror
http://rapidshare.com/files/50574325/test.7z.html - russian rom 17944
Superb!!
I've installed in my spanish N520 (changing country code previously). At the moment, all is right! I love you, I love misar, I love cmonex, I love freepk... .
One only question, have you in mind to release this rom in another language (maybe spanish)?
Thanks for your effort!!
Hello! WM6 are wonderfull but I have a problem with flashing of my N520. The ROM uprageding is successfully finished but I can not open any image (Error: Cannot load file). That is the reason why I do not see text on Today screen - the wallpaper is white and the text is white too. Then I do not see the control panel in WM Player because the skins are pictures too (I think). The same problem is with start-up logo - I only see white screen.
Do you have any idea why this is happened? Or do you have any possibility how to resolve this problem? The flashing has been done in WinXP, Active Sync 4.5 (firstly Host mode and then Partnership mode too). Previously version of WM was originaly ROM of FS, then I tried to flash AKU 3.5 - there was no problem and after that I tried upgrade to WM6 - but the problem always exist. :-( Please, help me! O
I don`t know what happens. you should flash aku 3.5.2. anyhow on your n500/520,try wm6. if it works - use.if no images - flash wm5
So I flashed aku 3.5.2. and everything works fine. After that I tried to upgrade to WM6 but there was always problem with images. So I have flashed back to aku 3.5.2. :-(
does this rom mean that there is a big chance on the wm6 image releasnig for the N560?
Well, actually the beta w/o gprs is available for n560, on wednesday it will be released by my friend, freepk, at 4pda
http://rapidshare.com/files/45969415/N560.5.2.1437.AKU.0.3.1.WM6.Athena.NoGPRS.rar.html
http://www.mediafire.com/?0z9n36ehynj
http://files-upload.com/406368/N560.5.2.1437.AKU.0.3.1.WM6.Athena.NoGPR.rar.html
are you talking about GPS or GPRS? Because i really need my navigation and can't see it present in the rom for n500 / n520?
Gps works - use your favourite s/w, gps locator removed
sp3dev said:
Well, actually the beta w/o gprs is available for n560, on wednesday it will be released by my friend, freepk, at 4pda
Click to expand...
Click to collapse
Hey sp3dev. seeing how I can't understand russian, can you ask freepk about the BT2.0 idea for me? thanx!!
Probably bluetooth chip doesnt support 2.0, if i have news, i`ll report to you
sp3dev said:
Probably bluetooth chip doesnt support 2.0, if i have news, i`ll report to you
Click to expand...
Click to collapse
N560 was certified by Bluetooth.org for bluetooth 2.0 (link). From the information I gathered, Fujitsu-Siemens went back to bluetooth 1.2 at the time due to backward compatibility issues by all bluetooth 2.0 devices. This problem has been solved nowadays and Windows Mobile devices now have bluetooth 2.0, such as the T830. I have a strange feeling the N560 and T830 uses the same bluetooth chipset. Since you guys have more knowledge on Windows Mobile devices, can you perhaps look into creating a bluetooth 2.0 driver for N560?
Here is a bit more info on this matter.
i placed the rom, working as a charm at this moment..
Praise all you guys that put time and effort in this..
i am having a issue with windows live.. It always wants to use a phone connection.. It doesn't use the default internet connect, e.g. BT or WIFI or AS..
is this configurable?
Can't wait until wednesday..
Will that rom have more apps? e.g. Remotedesktop?
btw, for n560 rom with gprs
http://4pda.ru/forum/attach/920400/N560.C550.WM6.Pups.777_Team.rar
I have been using the wm6 rom for 24 hours now and would like to say that it seriously speeds up my machine.
I would almost say that it is twice as fast..
Besides this i do like to comment on this:
S/W
Removed Windows Live, Catalog, Update, Sql Server, SQM
Added Total Commander, Al Reader, Oxios Memory, Task Manager, Softkey Applet, XCPUSCalar
CE OS 5.2.1437.17944.0.3.1
Replaced some icons
Removed FSC Gps Locator and Voice recorder
Record button calls start menu
Contacts - close/ok; contacts on hold
Calendar - left softkey; calendar on hold
Gps - renamed to messaging, fixed icon - right softkey; messaging on hold
Today - today;rotate screen on hold
Click to expand...
Click to collapse
The today and hold, to rotate doesn't work.. I get a shortcut error.. I do not see any of the other software..
As i am typing.. this is probably a different rom.. haha.. Excuse me
Now i am in trouble..
I tried to flash the N560 with gprs but my machine went BLUESCREEN.. IRQ_LESS_OR_EQUAL.
It was still in transfer mode when my laptop rebooted..
On the 2 bars the top one has like 10%..
I don't know what to do to save my pda?
============ UPDATE ==============
I did a hard reset and works fine again.. Let's retry..
Please discuss n560 in some other thread - my rom is for n520 and it has not got some bugs of n560. so please dont confuse people))) as far as i remember we have sth like "loox n5x0 flash format" or something similiar
No problem..
I'll find a N560 thread..
this one good enough?
http://forum.xda-developers.com/showthread.php?t=294165
what's eith this link?
the link to the "fixed" Rom
http://rapidshare.com/files/47353024/WM6.7z.htmll
i try to download it and i cant open the file? should i change the extension of the file or something?
does this new rom fixed the white today screen?
thx anyway

Windows 7 and WMDC

OK i knew microsoft had to slip up somewhere.. 7 is just far to good to be with out anything ive seen wrong..
i cant for the life of me get WMDC or activesync to connect..
Anyone else have this problem?
iamanalog said:
OK i knew microsoft had to slip up somewhere.. 7 is just far to good to be with out anything ive seen wrong..
i cant for the life of me get WMDC or activesync to connect..
Anyone else have this problem?
Click to expand...
Click to collapse
It's beta why not wait till official release then update to 7, god how long it took for Vista to be a stable OS, there have been some more posts about this and the answer tends to be install WMDC again, good luck.
the sad part is that with 7 being in beta, it out preforms vista a million to 1...
I should of wrote it.. yes i know 7 is still a beta, but when 99% of other programs work and better at that then vista. i see it as some other problem.
iamanalog said:
the sad part is that with 7 being in beta, it out preforms vista a million to 1...
I should of wrote it.. yes i know 7 is still a beta, but when 99% of other programs work and better at that then vista. i see it as some other problem.
Click to expand...
Click to collapse
I was no way saying that Vista is in anyway good and have no computers with Vista on it my point is your not the only one with 7 issues and it's beta and will only run on your system till August 1, so why not just wait and use a stable OS XP Pro.
Here's some reading you may find help in one of the threadz http://www.google.com/cse?cx=000825...ssues&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
Have you gone to USB to PC to see if turning off advanced network functionality if off.
Run Wndows update with the phone connected.
ive been using win7 for about 3 months now...WMDC 6.1 runs fine (on 3 different builds of win7) and my phone syncs just fine. as the wacky brit said, screw with the usb option
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
thats the one im using...
i'm actually thinking about installing windows7 live at work. i currently have vista (i like it personally. especially on my laptop at home) and am using windows 7 on a virtual machine.
im using it on both my laptops, my desktop and my work desktop. have been running it for a few months (since 6801) and love it...no major issues that have been show stoppers, but it is beta.
to make WMDC install on 7 beta, use this:
Click the Start button , click All Programs, and then click Accessories.
Right-click Command Prompt, and then click Run as administrator. In the User Account Control window, verify that Program name is Windows Command Processor, and then click Yes.
In the Administrator: Command Prompt window, type or paste the following text at the prompt:
reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /va /f
Press Enter to install the solution.
If The operation completed successfully displays, close the Administrator: Command Prompt window to complete this procedure. If "ERROR: Access is denied" displays, repeat this procedure from the top, making sure you clicked Run as administrator in step two.
stylez said:
It's beta why not wait till official release then update to 7, god how long it took for Vista to be a stable OS, there have been some more posts about this and the answer tends to be install WMDC again, good luck.
Click to expand...
Click to collapse
Completly agree stylez
I´ll wait for the stable version
Cheers,
cbutters said:
to make WMDC install on 7 beta, use this:
Click the Start button , click All Programs, and then click Accessories.
Right-click Command Prompt, and then click Run as administrator. In the User Account Control window, verify that Program name is Windows Command Processor, and then click Yes.
In the Administrator: Command Prompt window, type or paste the following text at the prompt:
reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /va /f
Press Enter to install the solution.
If The operation completed successfully displays, close the Administrator: Command Prompt window to complete this procedure. If "ERROR: Access is denied" displays, repeat this procedure from the top, making sure you clicked Run as administrator in step two.
Click to expand...
Click to collapse
Yep...the infamous Windows 7 Installer bug.
After you delete that key ALLL of your programs that use the Windows Installer will install fine. WMDC x64 installed fine and now my HTC Touch syncs up beautifully with Windows 7. Windows update even found some new update 'Windows Mobile-based support' or something like that
stylez said:
It's beta why not wait till official release then update to 7, god how long it took for Vista to be a stable OS, there have been some more posts about this and the answer tends to be install WMDC again, good luck.
Click to expand...
Click to collapse
are all you brits such sissy's?
hi stylez.
gixxum said:
are all you brits such sissy's?
hi stylez.
Click to expand...
Click to collapse
No i just like a stable OS to which is why i don't even touch Vista let alone 7, when built new quad core with 8GB RAM then Vista may come into my life, i go by a philosophy if not used in business or schools then no point being @ home
Hi gix. snookered
i use a Mac Classic II and a Commodore 64...i have no clue what you are talking about.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jealous?
gixxum said:
i use a Mac Classic II and a Commodore 64...i have no clue what you are talking about.
jealous?
Click to expand...
Click to collapse
Wow i want one, yet i have no idea what you say, was something about cumpets and cream tea???
On a seious note lol ATARI STFM
Hi All,
I have W7 running and it WILL NOT recognised my Samsung i200 or my new Mobinnova ICE, on my Desktop running Vista no problems, on the Laptop not interested!
I have tried the Install bug and all I get is cannot find path, PLEASE help!
Many thanks.
Really sorry for the double post, but OMG, how simple was that!
Unticked 'Enable advanced Network' in Connections USB to PC, and voila job done, sync both phones no problem at all!
happy chappy.....
you are aware that this is the excalibur forum right?
I like the way the answer was in #4 lol
yea...but chances are, he didnt have his british to english translation guide with him...
gixxum said:
yea...but chances are, he didnt have his british to english translation guide with him...
Click to expand...
Click to collapse
lol i only just noticed his flag, babelfish helps me loadz with your Americanized British lingo
Oh yeah i forgot to ask but your Commodore 64 picture in the corner under the lamp is that the power suply?

[ROM Package] [xda-devs] Windows Phone 7 USB Video

Windows Phone 7 USB Video
-------------------------
Released by: XDA Dev Team
-------------------------
With the software in this release it is possible to add functionality to a custom ROM that allows to switch the USB-port of a Windows Phone 7 device to Video Out and back to normal Zune sync. The desktop software can be used to display the video of Windows Phone 7 device on a PC. This also works for XNA software, so this allows to make full-size screen-captures of games too, by pressing "Prnt Scrn" while showing the video output on a PC. The desktop-software can also be used for demonstrations and presentations of Windows Phone 7 content.
Note:
When connected to the PC in Video Out mode you CAN'T sync any content to the phone or push apps to the phone. It will not show up in the Zune Client when in Video Out mode and you will NOT get Internet connection pass through either. An automatic reboot is required after every time you switch the phone from Video to Default mode or vice-versa.
Note:
The app that switches USB to Video Out on the phone also changes a registry setting that will slowdown the refresh-rate on the phone. That setting is restored when the USB profile is restored. If the setting would be left as it is by default, the USB traffic will be overloaded, which will result in much more lag, than a lowered refresh-rate. So, when the device is rebooted after changing USB to Video Out, be prepared to get a less smooth experience on the device. After changing USB back to normal, the device will respond as usual.
Requirements to show USB Video out on a PC
WP7 USB Video Out.rar https://hotfile.com/dl/169342947/0b8b7e7/WP7_USB_Video_Out.rar.html
Proper drivers on your phone.
HTC phones need a patched Qualcomm driver, because HTC has prevented the Video Out driver from running. The patched driver for 1st generation HTC's and for 2nd genration HTC's are included in this release. This patched driver needs to be added to the custom ROM.
Client Application on your PC.
Custom USB Driver manually installed on your PC (only tested on x86).
A High Speed USB Cable. Do not use over 10' cable or a USB extension cable. Extenders, even powered ones won't work. You must be directly connected to the PC with your 10' or shorter USB Cable.
Specifically for USB Micro we have only found this cable to work and thankfully it is very inexpensive. Use of any other USB Micro cable longer than 3 feet is not recommended and will most likely lead to demo failure.
Disable your PC's screen timeout. No Screensaver, etc.
Note:
The desktop drivers are not signed. That means that there will be issues running this on Windows x64. The get this running read instructions from Solution 2 here:
http://www.techspot.com/community/t...signed-drivers-in-windows-vista-7-x64.127187/
Cooking
Put "PkgSetting_USB2VIDEO" in your kitchen.
Put "PkgSetting_USB2VIDEO_HTCDriverfix_1stGen" only in your kitchen for 1stGen HTC.
Put "PkgSetting_USB2VIDEO_HTCDriverfix_2ndGen" only in your kitchen for 2ndGen HTC.
Enabling USB video out on the phone (ON THE PHONE)
From Start Menu swipe over to the application list and run "USB Video Out"
Answer Yes to enable USB Video out. This is a toggle.
When the phone boots up it is in Zune Mode which enables it to sync data with Zune Client software on the PC. You will need to toggle this to Video mode using the above steps to get video out.
Note: Toggling between Zune mode and Video mode requires the phone to reboot each time.
Setting up driver on the desktop (one time)
Make sure Zune is not running.
Your Phone must be flashed with a ROM that has video out bits on it, they must be enabled, and the phone must be on and plugged into your PC to continue. When the phone boots up the default setting is OFF for the video output.
Start -> Right click on Computer, select Manage
In "Computer Management" click on the Device Manager
Under "Other Devices"
Within the list of drivers Right Click on WM7VIDSTREAM driver, select "Update Driver Software..."
Choose Browse and point Windows to appropriate driver folder.
Approve the Unsigned Driver installation.
Starting application
Launch VidStream.exe.
This application does support disconnect & reconnecting of the phone's USB cable.
If a previous instance of VidStream.exe was running with the device connected, you will need to simply unplug and replug the phone's USB cable.
Press ESC to exit the PC Client application.
Re-enabling MTPz USB sync (Zune Mode)
Open "USB Video Out"
Answer Yes to enable MTPz
The device will reboot to make the changes effective.
We did it! :laugh: :highfive:
Hats off to my buddies from XDA Dev Team!
:victory: enjoy
HD2Owner said:
:victory: enjoy
Click to expand...
Click to collapse
Already
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thx, Good job:good:
Thanks
Good job, pals!
This is awesome. Thank you guys!
Can i rename "qualcomm_usbfn.dll" and modify my registry.For have the old driver if it do not works on HTC Titan?
Thank you very much my friend :good:
What's about nokia drivers? Me need to patch it, or not?
This major breakthrough should be highlighted in XDA News Portal. I really don't understand why not. Well...
Sent from my HD7 T9292 using Board Express
Nice ! This is awsome... Congrads on this great find !
Questions...
1. I'm running a custom rom currently, is it possable to add this with out rebuilding a rom and re-flashing ?
2. Is it possable to use a HTC (touch pro/TP2) Video out cable (with an adapter to make it to Mini USB)to connect to a TV or projector with this ?
nice job!!
Thanks for your hardworking
titi66200 said:
Can i rename "qualcomm_usbfn.dll" and modify my registry.For have the old driver if it do not works on HTC Titan?
Click to expand...
Click to collapse
Better not to play tricks with modules running in kernel space. Besides qualcomm_usbfn.dll is not somehow "horribly modified" - just missing functionality is enabled.
It works on Titan.
DavidinCT said:
...Questions...
Click to expand...
Click to collapse
Answers:
1. No
2. No
I hope Titan chef's include this in their next rom
Lumia 710 work fine!Thank you very much!:angel:
@AndrewSh
Thanks
edit
HTC HD2 work fine!

Categories

Resources